CONDENSED CATALOG CC-2004escventura.com/manuals/versa_productOverview_cat.pdf · Series T hydraulic-to 500 psi (35 bar) SERIES K4.7 & K6.5 VALVES Air Management System Function: Four-Way

CONDENSED CATALOG CC-2004

www.versa-valves.come-mail: [email protected]

THE COMMITMENT CONTINUES

Fluid Power is our business. It is ouronly business, so we have to be goodat it. Since its beginning in 1949, Versahas maintained its commitment to quali-ty products and satisfied customers.

Our focus on product variety, techni-cal expertise and company supportremains constant. It all begins with aresponsiveness to industry needs andends with delivery of the valve or sys-tem you need—when you need it.

We view ourselves as problem solv-ers and that role requires more thanmaking good products. It is what we dobefore and after that is equally impor-tant. From drawing board to user satis-faction, our commitment is continuous.

HOW WE PUT IT TOGETHERIS WHAT SETS US APART

The Versa line of Air Control Valves offers a broad selection of sizes, types, actuatorsand mountings.

The total spectrum of application covers a wide diversity of markets, which gives us afoothold in numerous important fields, and allows us to develop new ideas.

If you think nobody makes the valve you need, you haven’t asked us.

QUALITY ISABSOLUTE

Quality has no degrees at Versa.Every product is designed and manu-factured to conform to uniformly highstandards. These standards areassured by a quality management sys-tem which includes ISO 9001 certifica-tion and testing of all products prior toshipment.

No matter how tough the applicationor environmental demands, Versa offersyou a choice of valves to meet the chal-lenge. Advanced design, durable con-struction materials and rigid manufactur-ing standards provide valves you can relyon for years of trouble-free performance.

Be it a single valve or a pneumaticsystem, Versa’s commitment to quali-ty is uncompromising. Count on it.

WORLDWIDEACCESSIBILITY

More than 500 fluid power represen-tatives and over 100 stocking locationscomprise Versa’s worldwide distributionsystem. They are supported by manu-facturing and technical centers in theUnited States and The Netherlands.

The distributor network is the key tocustomer service and the source ofcontinuous application feedback. Versauses this input as part of its researchand development program in an effortto respond to individual and industryneeds.

Versa makes certain that our distrib-utors’ sales and service personnelreceive factory training on an ongoingbasis.

Our distributor family is a source ofpride to Versa—but more important—itis a source of support and service to allof our customers.

Contact Versa for the distributor ser-vicing your specific area.

C5 & C7 VALVES – Body-portedFunction: Four-Way multipurpose 5/2 & 5/3 Port Sizes:

Style: C5 = 1/8" NPT or G1/8Side-ported (individual valves) C7 = 1/4" NPT or G1/4Gang mounting (2 or more valves)Supply & Exhaust manifold mounting (2 to 10 valves)Construction:Packed, balanced spool designAnodized aluminum, stainless steel, brass &synthetic resinFKM (fluorocarbon) sealsOrifice/Flow:C5 = 0.197" (5 mm)/Cv0.75 (Kv11)C7 = 0.276" (7 mm)/Cv1.6 (Kv23)Actuation:Solenoid/pilotSolenoid/pilot-low watt service Bulletin: CRemote pressure pilotManualService: Pneumatic-vacuum to 115 psi (8 bar)

SERIES C TYPE VALVESC3 VALVESFunction: Port Sizes: Service: Four-Way 5/2 10-32 UNF or M5 Pneumatic-vacuum

to 115 psi (8 bar)Style:Side-ported (individual valves)Gang mounting (2 or more valves)Supply & Exhaust manifold mounting(2 to 10 valves)Construction: Packed, balanced spool designAnodized aluminum, stainless steel, brass, nylonFKM (fluorocarbon) sealsOrifice/Flow: 0.118" (3,0 mm)/Cv 0.23 (Kv3.3)Actuation:Solenoid/pilot-low watt serviceRemote pressure pilot Bulletin: C3

C5 & C7 VALVES – Manifold MountingFunction: Four-Way multipurpose 5/2 & 5/3

Style: Modular manifold mounting(1 to 12 stations)with or without plug-in electrical connectionConstruction:Packed, balanced spool design Anodized aluminum, stainless steel, brass and synthetic resinFKM (fluorocarbon) sealsOrifice/Flow:C5 = 0.197" (5 mm)/Cv0.75 (Kv11)C7 = 0.276" (7 mm)/Cv1.5 (Kv22)Actuation:Solenoid/pilotSolenoid/pilot for low watt serviceService: Pneumatic-vacuum to 115 psi (8 bar)

Cylinder Port Sizes:C5 = 1/8" NPT or G1/8, 1/4”NPT or G1/4C7 = 1/4" NPT or G1/4, 3/8” NPT or G3/8Common Inlet & Exhaust Port Sizes:C5 = 1/4" NPT or G1/4C7 = 3/8” NPT or G3/8

Bulletin: C

E5 Compact VALVESFunction: Sizes: 1/8" NPTTwo-Way 2/2Three-Way 2/2, 3/2Directional 3/2Multipurpose 3/2Style:Side-portedConstruction:Stainless steelNBR (nitrile) seals-ordinary serviceFKM (fluorocarbon) seals-hazardous serviceOrifice/Flow:1/32 to 1/8" (0,8 to 3,2 mm)/Cv.03 to .21 (Kv0.4 to 3)Actuation: Bulletin: EDirect solenoidDirect solenoid for hazardous locationsDirect solenoid for low watt hazardous locationsService: Pneumatic or hydraulic-vacuum to 500 psi (35 bar)

E Full Size VALVESFunction: Sizes: Service: Pneumatic or hydraulic-Two-Way 2/2 1/8" NPT or G1/8 vacuum to 250 psi (17 bar)Three-Way 2/2, 3/2 1/4" NPT or G1/4Directional 3/2Multipurpose 3/2Style:Side-portedSubplate mounting (individual valves)Multiple manifold mounting (2 or more valves)Construction: Stainless steel or aluminumNBR (nitrile) seals-ordinary serviceFKM (fluorocarbon) seals-optionalOrifice/Flow: 3/64 to 1/4" (1,2 to 6,4 mm)/Cv.06 to .79 (Kv0.9 to 11.5)Actuation:Direct solenoidDirect solenoid for hazardous locations

SERIES E TYPE VALVESEZ Bantam VALVESFunction: Sizes: 1/8" NPTTwo-Way 2/2Three-Way 2/2, 3/2Directional 3/2Multipurpose 3/2Style:Side-ported (individual valves)Multiple manifolding (2 or more valves)Construction: Aluminum & stainless steelFKM (fluorocarbon) sealsOrifice/Flow: 1/32 to 1/8" (0,8 to 3,2 mm)/Cv.03 to .21 (Kv0.4 to 3)Actuation:Direct solenoidService:Pneumatic or hydraulic-vacuum to 500 psi (35 bar)

Bulletin: E

Bulletin: E

SERIES V, and T VALVESFunction: Sizes: Orifice/Flow:Two-Way 2/2 1/8" NPT or G1/8 = 3/8" (9,5mm)/Cv1.4 (Kv20)Three-Way 3/2, 3/3 1/4" NPT or G1/4 = 3/8" (9,5 mm)/Cv1.8 (Kv26)Four-Way 5/2, 5/3 3/8" NPT or G3/8 = 5/8" (16 mm)/Cv3.4 (Kv49)Five-Way 5/2, 5/3 1/2" NPT or G1/2 = 5/8" (16 mm)/Cv 4.0 (Kv58)Selector 3/2, 3/3 3/4" NPT or G3/4 = 11/16" (27mm)/Cv9.7 (Kv140)Diverter 3/2, 3/3 1" NPT or G1 = 11/16" (27mm)/Cv1.11 (Kv161)

11/4" NPT or G11/4 = 11/4" (32 mm)/Cv14.9 (Kv216)Style:Side-portedSubplate mounted (individual valves)Multiple manifold mounting (2 or more valves)Construction: O ring packed balanced spool design requires minimal forceindependent of controlled pressure for actuation; bubbletight sealing. Full flow port design.Forged brass, rod brass & stainless steelO ring seals – NBR (nitrile) Series V standard

TFE (teflon) Series T standardActuation:Solenoid/pilot ManualSolenoid/pilot for hazardous locations Pedal/treadleSolenoid/pilot for low watt hazardous locations Mechanical Solenoid/pilot for low watt serviceRemote pressure pilotBleed pilotCombination ActuatorsService:Series V pneumatic–vacuum to 200 psi (14 bar)Series T hydraulic-to 500 psi (35 bar)

SERIES K4.7 & K6.5 VALVESAir Management SystemFunction:Four-Way 4/2, 4/3; can be used as 2, 3, or 4-wayFive-Way 4/2, 4/3Style:Subplate mounting (individual valves)Multiple manifold system (some with custom integrated circuitry)Construction: O ring packed balanced spooldesign requires minimal force independent ofcontrolled pressure for actuation; bubbletight sealingSmall physical size with large flowAluminum & stainless steelFKM (fluorocarbon) — O ring sealsActuation:Solenoid/pilotSolenoid/pilot for hazardous locationsSolenoid/pilot for low watt hazardous locationsSolenoid/pilot for low watt serviceRemote pressure pilotManual; Mechanical Bulletin: K

Sizes:1/4" NPT or G1/4Orifice/Flow: K4.7=3/16" (4,7 mm)/

Cv0.7 (Kv10.1)K6.5=1/4" (6,5 mm)/

Cv1.2 (Kv17.4)Service: Pneumatic-vacuum to 175 psi (12 bar)

}

SERIES B VALVESFunction: Two-Way, 2/2 Sizes: 1/8" NPT

Three-Way, 2/2

Style: Side-portedMultiple manifold mounting (2 or more valves)

Construction:O ring packed poppet; bubbletight sealing.Brass & Stainless steelO ring seals—NBR (nitrile) standard

Orifice/Flow:3/16" (4,7mm)/Cv0.6 (Kv8.7)

Actuation:ManualRemote pressure pilotMechanical

Service: Pneumatic-vacuum to 200 psi (14 bar)

®SERIES B VALVES

AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001

CERTIFIED

Two-Way Types for bleeding pilots of larger valves, forbleeding cylinders or small pressure systems, operatingair tools or motors, opening or closing air lines.Three-Way Types for controlling pilots or diaphragms oflarger valves or small cylinders...or any pressure systemthat is alternately pressurized and exhausted.Service: Pneumatic-vacuum to 200 psi (14 bar). Two-way can be used for hydraulic pressures to 500 psi.

BULLETIN B-2003


Versa Products Company, Inc., 22 Spring Valley Road, Paramus, New Jersey, USA 07652 • TEL: 201/843-2400 FAX: 201/843-2931Versa BV., Prins Willem Alexanderlaan 1429, 7312 GB Apeldoorn, The Netherlands • TEL: +01131-55-3681900 FAX: +01131-55-3681909

Bulletin: VT

Bulletin: B

AUTOMATION & CONTROLVALVES & COMPONENTSFOR PROCESS CONTROLType: Function: Construction: Series B316 Three-Way 3/2 316 Stainless steelSeries B900 Main Supply Reset 316 Stainless steelSeries B550 & B900 Indicating Relay Hardcoated aluminum

or 316 Stainless steelO ring seals – FKM (fluorocarbon)

Sizes: 1/4” NPTService: Pneumatic - to 200 psi (14 bar)Actuation:Solenoid/pilot Remote pressure pilotSolenoid/pilot for hazardous Manuallocations Mechanical

Solenoid/pilot for low watt Combination actuatorshazardous locations

Bulletin: B316

ISO 9001

CERTIFIED

®BULLETIN B316-2004

AUTOMATION – CONTROL VALVES – COMPONENTSFOR PROCESS CONTROL



SERIES V316 VALVESFunction: Style: Sizes: Orifice/Flow:Three-Way 3/2, 3/3 Side-ported 1/4" NPT = 3/8" (9,5 mm)/Cv1.8 (Kv26)Four-Way 5/2, 5/3 3/8" NPT = 3/8" (9,5 mm)/Cv2.0 (Kv29)Selector 3/2, 3/3 1/2" NPT = 5/8" (16 mm)/Cv 5.5 (Kv80)Diverter 3/2, 3/3Construction: O ring packed balanced spool design Service: Pneumatic–requires minimal force independent of controlled - vacuum to 200 psi (14 bar)pressure for actuation; bubbletight sealing. Designed for corrosive atmospheres and aggressive media.Materials meet NACE Specification MR-0l-75.Full flow design 316 Stainless steelO ring seals–FKM (fluorocarbon) per ASTM D-1418/ISO 1629Actuation:Solenoid/pilot Remote pressure pilotSolenoid/pilot for hazardous Remote pressure airlocations latch pilot

Solenoid/pilot for low watt Manualhazardous locations Manual-latching

Solenoid/pilot for low watt service Bulletin: V316

}

SERIES C316 VALVESFunction: Sizes: Style/Flow: Three-Way 3/2 1/4" NPT Side-ported or Manifold mounted/Four-Way 5/2 Cv 2.0 (Kv 29.3)

NAMUR/ Cv 1.6 (Kv 23.5)Construction: Fluorocarbon packed balanced spool design requiring minimal force independent of controlled pressure for actuation.316 Stainless steelSealing:BubbletightService:Pneumatic- to 150 psi (10 bar)Actuation:SolenoidPilotLatching

Bulletin: C316S Bulletin: C316NE

SERIES H VALVESFunction: Sizes: Flow: StyleTwo-Way 2/2 1/4" to 1" NPT Up to Cv 1.9/ 10.5 GPM ManifoldThree-Way 3/2 or G (Kv 27.8/ 40 L/Min.) mounting

Construction: Stainless steel (or aluminum) components utilizing aceramic design assuring positive sealing and long life.Sealing:BubbletightService:Pneumatic- to 3600 psi (245 bar)Hydraulic- to 10,000 psi (680 bar)Actuation:SolenoidPilotLatching

Bulletin: H-Tech

ACCESSORIESFunction:

Bleed Control Valves

Bleed Valves

Dust Excluders

Electrical Quick Exhaust Valves

Foot Guards

Quick Exhaust Valves

Shuttle Valves

Status Indicators Bulletin: ACC

VALVES FOR PNEUMATICACTUATORSFunction: Sizes: Orifice/Flow:E5: Three-Way - - - - - -1/4" NPT or G1/4 = 3/64" (1,2 mm) nominal/Cv0.08 (Kv1.2)C5: Three-Way 3/2, 3/3-1/4" NPT or G1/4 = 0.197" (5 mm)/Cv0.75 (Kv11)C5: Four-Way 5/2, 5/3-- 1/4" NPT or G1/4 = 0.197" (5 mm)/Cv0.75 (Kv11)Style: Direct mountConstruction: E5 & C5: anodized aluminum body & plunger,

stainless steel solenoid parts.E5 Seals: NBR (nitrile); poppetC5 Seals: FKM (fluorocarbon); balanced spoolActuation: E5: direct solenoid; C5: solenoid/pilotService: Pneumatic–E5: 0-150 psi (10.3 bar)

C5: 10-115 psi (0.7 to 8 bar)

Bulletin: NMce

®NAMUR DIRECT MOUNT PNEUMATIC ACTUATOR VALVES

BULLETIN NMce-2004

AIR VALVES FOR INDUSTRY SINCE 1949

SOLENOID ACTUATION1/4 NPT or G1/4DIRECT MOUNT TO MANY DIFFERENT ACTUATORS10 YEAR WARRANTY

C5 Series: 3-way or 4-way, 2 or 3 positionPneumatic Service to 115 psi (8 bar)

E5 Series: 3 way, 2 positionPneumatic Service to 150 psi (10.3 bar)

C316 Series: Stainless Steel 3 way or 4 way, 2 positionPneumatic Service 15 to 150 psi (1 to 10.3 bar)

ISO 9001

CERTIFIED



®

WORLD HEADQUARTERS:Versa Products Company, Inc.22 Spring Valley RoadParamus, NJ 07652, U.S.A.Telephone: (201) 843-2400FAX: (201) 843-2931e-mail: [email protected]

ISO 9001

CERTIFIED

EUROPEAN HEADQUARTERS:Versa B.V.Prins Willem Alexanderlaan 1429,7312 GB Apeldoorn, The NetherlandsTelephone: +01131-55-3681900FAX: +01131-55-3681909e-mail: [email protected]

ISO 9001Accredited by theDutch Council for

Certification

www.versa-valves.com

Documents

CONDENSED CATALOG CC-2004escventura.com/manuals/versa_productOverview_cat.pdf · Series T hydraulic-to 500 psi (35 bar) SERIES K4.7 & K6.5 VALVES Air Management System Function: Four-Way