Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
92
Concrete Screws
Technical Helpline UK: 0800 731 4924 Technical Helpline ROI: 1 800 882 388
Customer Services UK: 0800 833 381Customer Services ROI: 1 800 946 791 www.itwcp.com
Tapcon®
Countersunk
Tapcon®
Hex Head
TAPCON® BLUE are available in smaller quantities. Refer to our Bagged Range on page 136.
TAPCON® BLUE High performance concrete anchor that cuts its own thread into concrete, brick and block
Applications
— Fast installation: Drill, Drive, Done
— Versatile: Slotted washered hex head version and Phillips flat head version available
— Available in 5mm & 6mm and lengths from 32 - 125mm, to cover a wide number of applications
— Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications
— No need to pre-spot holes, no inserts required
— Removable and adjustable
— Can be installed close to edges
Features and Benefits
M&E - FIXING ELECTRICAL ACCESSORIES:
M&E - SERVICES:
TIMBER TO CONCRETE:
METALWORK:
— Saddles — Back boxes — Cable clips
— Conduit clips — P clips — Cable cleats
— Ductwork — Site barriers — Temp safety rails
— Security fencing — Cable trays, channel — Suspended ceilings
— Formwork — Battens — Base plates
— Plywood backer boards
— Steel framing systems
— Railings, hand rails — Brackets and signs
— Fire protection — Insulation systems
to masonry
Drill Drive Done COUNTERSUNK HEX HEAD
Approvals
Installation
Materials
CONCRETE
SBCCi Approved
9759
Metro-Dade Approved
02-031-03
CBO Approved
3370
3900 UK ITWCP Product GUIDE 2017.indb 92 21/03/2017 11:53
93
Concrete Screws
Concrete Steel Multi-Material Masonry Plasterboard
*Kit includes: Condrive Sleeve, Phillips Drive Adaptor, Phillips Nº 2 Drive Bit, Phillips Nº 3 Drive Bit, 6.5mm Hex Socket, 8mm Hex Sockets, Drill Bit Holder, Hex Key, 4 x 110mm Drill Bit and 5 x 110mm Drill Bit.
Accessories for Tapcon® Countersunk & Hex Head
SDS+ Drill Bits for use with Condrive Sleeve
Description Hole Ø(mm) Drive Fixture Thickness
(mm)Anchor Length
(mm)Min Hole Depth
(mm)Min Embedment
(mm)Box Qty Code
3F32 4 PH2 0 - 7 32 35 25 100 921507
3F45 4 PH2 5 - 20 45 35 25 100 921508
3F70 4 PH2 30 - 45 70 35 25 100 921510
3F82* 4 PH2 42 - 57 82 35 25 100 921511
4F45 5 PH3 5 - 20 45 35 25 100 921514
4F57 5 PH3 17 - 32 57 35 25 100 921515
4F70 5 PH3 30 - 45 70 35 25 100 921516
4F100 5 PH3 60 - 75 100 35 25 100 921518
4F125 5 PH3 85 - 100 125 35 25 100 921519
Description Hole Ø(mm)
Across Flats (A/F)(mm)
Fixture Thickness (mm)
Anchor Length (mm)
Min Hole Depth(mm)
Min Embedment(mm)
Box Qty Code
3H32 4 6.5 0 - 7 32 35 25 100 921498
3H45 4 6.5 5 - 20 45 35 25 100 921499
3H57 4 6.5 17 - 32 57 35 25 100 921500
4H32 5 8 0 - 7 32 35 25 100 921501
4H45 5 8 5 - 20 45 35 25 100 921502
4H57 5 8 17 - 32 57 35 25 100 921503
4H70 5 8 30 - 45 70 35 25 100 921504
4H82 5 8 42 - 57 82 35 25 100 921505
4H100 5 8 60 - 75 100 35 25 100 921506
Description Thread Ø Box Qty Code
Threaded Rod Hanger Clip (TRH)* M8 - M10 100 011431
THREADED ROD HANGER FOR USE WITH TAPCON® PAN HEAD
Description Qty CodeCondrive Sleeve for SDS 1 921437
Drill Drive Adaptor for Condrive Sleeve 1 921160
Tapcon Condrive Drill Driver Installation Kit 1 921159*
Description Qty Code
SDS+ Hex 4.35 x 180mm Tapcon Drill Bit Up to 100mm
1 921137
SDS+ Hex 5.15 x 180mm Tapcon Drill Bit Up to 100mm
1 921154
SDS+ Hex6 x 180mm Tapcon Drill Bit Up to 100mm
1 920940
Accessories for Tapcon® Countersunk
Accessories for Tapcon® Hex Head
Description Qty Code6.5mm Hex Socket 1 921162
8mm Hex Socket 1 921163
Description Qty CodePhillips No 2 Drive Bit 1 921098
Phillips No 3 Drive Bit 1 921099
*Only use with mechanical fixings.
TAPCON® BLUE - CSK Head Type: Countersunk
Product Range
Accessories
Head Type: Hex HeadTAPCON® BLUE - HEX HEAD
SPIT
Mec
hani
cal
Anch
ors
- TAP
CON
®
3900 UK ITWCP Product GUIDE 2017.indb 93 21/03/2017 11:53