Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
The perfect fi nish.Surfaces and perforations for Lindner Metal Ceilings and Plafotherm® Heated/Chilled Metal Ceilings
Concepts
Products
Service
2
Building newsolutions.
Lindner undertakes major worldwide projects in all areas of interior fi nishes, insulation technology, industrial services and building facades. Frompre-planning through to project completion Lindner is your partner of choice.
The Company’s extensive manufacturing capability enables quality to be strictly maintained whilst allowing maximum fl exibility to meet individual project requirements.
Environmental considerations are fundamental to all Lindner’s business principles.
Through partnerships with clients Lindner turns concepts into reality.
Choosing Lindner you have:Lindner Concepts:Tailored solutions specifi cally geared to satisfy individual project requirements
Lindner Products:Quality materials and systems to the very highest industry standards
Lindner Service:Comprehensive project management services
3
Your advantages at a glance- Richness of appearance due to unique surfaces- Wide range of coatings for different requirements- 3D effects with optional stamping
Main photo: Stockholm Waterfront Lobby, Sweden© Michael Perlmutter
Suspended metal ceilings are primarily known for their durability and functionality. Although, they enjoy this reputation, the material metal is ideally suited to the realisation of unique designs – especially as high-quality metal ceiling by Lindner.
Lindner Metal Ceilings epitomise the union of shape and surface. Discover our variety of functional and decorative fi nishes and new ways of stamping and perforation.
Surfaces and perforations for Lindner Ceiling
The perfect fi nish.
Airport Hotel, Dubai, U.A.E.
4
ContentsPowder coating 5
Decorative surfaces
ARTline 6-7
STYLEline 8-9
GRAPHICline 10-11
PUREline 12
Special surfaces
INOXlook 13
Functional coatings
Meteo 14-15
AntiGraffi ti 16
AntiBac 17
Mutex 18
Structured surfaces
CROSSdesign 19
TOUCHdesign 20
Expanded metal 21
Perforations 22-42
Special perforations 43
Building material class tested to EN 13501-1 (BS 476 Part 6) tested to ASTM E 84Classifi cation of building product’s fi re performance
Sound absorption tested to 354 DIN EN 20354 (ISO)tested to ASTM C 423Measurement of sound absorption in a reverberation room
Durabilitytested to DIN EN 13964 table 7 and 8Suspended ceilings – Requirements and test methods
Quality Standard
Light refl ectance and degree of glosstested to DIN 5033Colorimetry
EN 13964
CE labelling for all intended purposes
Corrosiontested to DIN EN ISO 12944Paints and varnishes – Corrosion protection of steel structures by protective paint systems
Federation of Industrial Metal Ceiling Manufacturers e. V.
5
Powder coatingIn standard confi guration, Lindner Metal Ceilings are furnished with a powder coating in white colour RAL 9010 or gray colour RAL 9006. As a matter of course, all RAL and NCS colours are available.
Emphasis on a clean powder coating:No waste air* and no effl uents!- Solvent and VOC-free (volatile organic compounds)- 800 m³ of contaminated water recycled every year- 25 tons of powder saved yearly thanks to powder recycling* Except from steam during pre-treating
wder f
Lindner Metal Ceiling panels with acoustic tissue and powder coating meet the building material class A2-s1, d0 “non-combustible” according to EN 13501-1 and are also rated as harmless in case of fi re.
Unilever Hamburg, Germany
6
Applying our decorative powder coating ARTline, we can perfectly imitate wood surfaces of various kinds, and fantasy designs. Simultaneously, the familiar advantages of metal ceilings can be enjoyed without restrictions.
This special powder coating is suitable for indoor and outdoor application as well as for Plafotherm®
Decorative surfaces
Heated and Chilled Ceilings and Suspended Fireproof Ceilings. Moreover, its outstanding resistance against UV radiation, solvents and chemicals of many kinds is quite impressive.
Fire behaviour of ARTline surface fulfi ls the building material class A2-s1, d0 according to EN 13501-1 and class A according to ASTM E 84.
Standard decors
Acacia 1 Acacia 3
Acacia 2
American Walnut 1 Beech 1
Black Cherry 1
Douglas Fir 2 Douglas Fir 4
Douglas Fir 3
Oak 1 Oak 3
Oak 2
ARTline – Decorative Powder Coating
7
Standard decors
Chestnut 1 Cherry 1
Chestnut 2
Cherry 2 Cherry 4
Cherry 3
Pine 1 Teak 1
Pine 2
Walnut 1 Walnut 3
Walnut 2
Fantasy designs
Karbon 3Cork White Green MarbleGranite 115
As with all natural products, wood and concrete vary slightly in colour and structure. Printer inks cannot match the colour tones perfectly: minor differences in colour are therefore possible.Other wood coverings and patterns are available on request.
8
Dubai Metro Station, U.A.E.
9
Oak 501
Walnut 501
Concrete 601
Oak 500
Walnut 500
Concrete 600
Oak 503
Structure 805
Oak 502
Structure 804
Possible surfaces- Wooden decors- Various metallic surfaces: - Stainless steel polished - Anodised aluminium as E6EV1- Concrete surfaces- Fantasy decors
As with all natural products, wood and concrete vary slightly in colour and structure. Printer inks cannot match the colour tones perfectly: minor differences in colour are therefore possible.Other wood coverings and patterns are available on request.
As a compelling alternative, the decorative foil coating STYLEline can perfectly imitate metallic surfaces besides its possibilities of wooden designs with enormous cost savings compared to the original surface.
Fire behaviour of STYLEline surface fulfi ls class A according to ASTM E 84.
STYLEline – Decorative Foil Coating
Metallic 200Metallic 101
10
11
GRAPHICline offers complete freedom of design. This exceptional surface provides the opportunity to apply your desired image on different surface structures and materials by means of a model picture or illustration. All colours and images can be applied
colour-fast, gloss-fast and light-fast on an unlimited surface area due to a photorealistic resolution up to 1200 dpi! All colours and images may be printed on panels of any required size.
GRAPHICline – Print Technology
MeshworkAluminium foam Clouds
Realisation in a variety of appearances possible.This kind of surface technology can be applied in different areas such as offi ces, foyers or moist rooms due to a special sealed fi nish and its UV resistance.
12
Genuine wood veneer on metal – an exclusive combination! PUREline is certainly the most outstanding way of surface refi nement and unique in its possibilities.
The natural appearance of PUREline creates a pleasant club atmosphere in your rooms.Fire behaviour of PUREline surface fulfi ls class A according to ASTM E 84.
PUREline – Genuine Wood Veneer
South Texas Blood & Tissue Center, San Antonio, Texas/USA
Genuine wood for highest demands.Using different types of wood, you can create a special and auspicious atmosphere in your rooms by giving them an individual optical touch. Realisation with all types of wood possible.
13
Special surfaces
INOXlook provides metal ceilings made of aluminium with the look of a stainless steel surface.The surface INOXlook is achieved by special rolling and anodising processes and corresponds to a grinded stainless steel surface (grain 180).
Aluminium manufactured to EN 485-4 and EN 573-3, anodisation according to EN 12373.
INOXlook
Advantages- Signifi cant weight savings compared to steel- Easy cleaning- High corrosion resistance- High abrasion resistance- Optionally sterilisable
14
Functional coatings
Meteo prevents your ceiling and corresponding substructure steadily from corrosion and protects sustainably. This coating is particularly suitable for metal ceilings in corrosive areas such as swimming pools or outdoor areas.
Depending on the requirements Meteo offers protection in an optimum way according to the required corrosion protection class. Tested to DIN 55633, EN 13964 Table 8 Class D and DIN EN ISO 12944-6.
Meteo – Anti-corrosion Coating
© Marco Rullkötter - Fotolia
15
Water Park, Grünstadt, Germany
Underground Station, Düsseldorf, Germany
Possible application areas- Swimming pools- All kind of outdoor areas- Railway stations and
airports
16
Unfortunately, not every picture is a work of art. Lindner therefore offers the possibility of an anti-graffi ti coating. The major advantage of AntiGraffi ti is not only the literal protection against damages caused by graffi ti but also the provision of a generally easy to clean surface. Good weather resistance properties and light fastness emphasise the suitability of the coating for exterior application.
The resistance of the coating against several solvents, proven by additional chemical tests, also allows the intensive cleaning of strongly soiled surfaces (e.g. with enamel spray) without leaving behind lasting traces on the metal ceiling.
AntiGraffi ti
Advantages- Protection from damage- Easy to clean surface of metal ceilings- Good weather resistance properties and light fastness- Also suitable for exterior areas- Proven protection and resistance of coating
© Andreas Ernst - Fotolia.com
17
For areas with high hygienic requirements AntiBac offers effective protection against bacteria and other germs. AntiBac is a powder-coated fi nish, specially developed for this purpose, which can also be used in all other busy areas of buildings in order to prevent and effectively fi ght the spread of bacterial cultures.
The active powder-coated fi nish prevents the development and expansion of germs when exposed to air humidity and consequently impedes the risk of infection with diverse diseases as the germs may not fi nd any culture medium on the surface.
AntiBac
Possible application areas- Hospitals- Laboratories- Large-scale catering rooms- Sanitary facilities
18
Mutex is the return of silence in your rooms. This structured coating can contribute enormously, either alone or in combination with various inlays, to sound absorption and has almost equivalent properties compared to a conventional powder coating regarding fi re protection, light refl exion and cleaning.
Mutex meets the building material class A2-s1, d0 “non-combustible” tested to EN 13501-1 and Class A tested to ASTM E 84.
Mutex
Advantages- Acoustically highly effective due to its structured surface and sound
absorbing inlays- Can be combined with various fi ne perforation patterns- Extremely maintenance-friendly
Bundeswehrkrankenhaus Ulm, Germany
19
Structured surfaces
Advantages- Good air circulation properties due to high percentage of open area- Variations in appearance for interior and exterior areas- Unique effects in the interaction with light- Application as acoustic lock at recording studios, photographic, fi lm
and TV studios
Your ceiling as a striking eye-catcher: Lindner offers the look of meshwork technology also in metal as a trend-setting design solution. This unique three-dimensional visual appearance is achieved using the combination of embossing and perforation. The metal ceiling panel with CROSSdesign surface can be equipped with different sound absorbing inlays depending on the demands concerning acoustics.
We recommend our common powder coating colours RAL 9006 or ’brillant metallic’ as fi nish.Nevertheless, all colours from the RAL or NCS colour system can be chosen as fi nish.
CROSSdesign
20
Given the possibility of being stamped with a special design, TOUCHdesign represents an attractive alternative to metal ceilings with a plane surface. That involves furnishing those metal panels with different stamping patterns and additionally with perforation.
Combine the different shapes and dimensions of TOUCHdesign regarding stamping and perforation for a ceiling with a pleasant look that is second to none.
TOUCHdesign
Advantages- Variations in appearance for interior and exterior areas - Living threedimensional effects- Trend-setting combination of design and function
© M
ich
ael P
erlm
utt
er
21
Expanded metal
Versatility at its best:- Hook-On Type- Lay-In Type- With circumferential aluminium
frame
It is diffi cult to imagine today’s modern architecture without Expanded Metal Ceilings. As well as providing an important function they also offer an almost infi nite variety of structures, formats and surfaces.
The light weight of the material, together with its accentuated structured appearance, opens up many new design opportunities. A wide range of expanded metal meshes is available for your choice.
Individuality in material and shape.
Oberrheinhalle Offenburg, Germany
Diamond meshSquare mesh Long-link/hexagonal mesh
- With Swing-Down Function- With Drop-Slide Function- As Post Cap Ceiling with Crossing
Boxes
22
Torre Espacio, Madrid, Spain
23
Lindner Perforations
Lindner Metal Ceiling panels are primarily made with zinc-galvanized steel or aluminium products and they are fi nished with a powder coating process.
The perforations, described as holes by diameter size and open areas (as determined by the space be-tween the holes), in this brochure are valid for metal ceiling panels consisting of zinc-galvanized steel. Only the perforated areas are taken into considera-tion for the assessment of measured open areas. Non-perforated areas, such as plain borders, are not considered.
Position and tolerances of perforations are defi ned according to the specifi cations of EN 13964. The hole diameters and the perforation patterns are measured before subsequent surface fi nishes. Depending on the type of surface fi nish, the hole diameters may vary.
Lindner offers a wide range of standard perforation patterns to meet various acoustical and aesthetic de-sign demands; additionally, we gladly offer several special perforations if desired.
Types of perforation patterns
Rd round holes arranged in diagonal pitch (45°)
Rg round holes arranged in straight pitch
Rs round holes, special arrangement
Rv round holes arranged in diagonal pitch (60°)
Qg square holes arranged in straight pitch
Qd square holes arranged in diagonal pitch (45°)
Lg slotted round holes arranged in straight pitch
Lge slotted square holes arranged in straight pitch
St elliptic holes (expanded metal sheet look)
Your advantages at a glance.- Wide range of perforations starting from 0.7 mm hole size for different materials
- Various perforation designs and patterns available- A variety of sound-absorbing inlays guarantees high acoustic performance
Perfectly closed ranks.
24
Lindner Perforations
Rg 0,7 - 4
Rg 0,7 - 1
Rd 0,7 - 2
Hole Ø 0.7 mm, diagonal pitch (45°)2 % open area(perforated over the edges)
material thicknesswidth of perforation
steel 0.6 mm 1,340 mm
aluminium 0.6 mm 860 mm
aluminium 0.8 mm 1,340 mm
Hole Ø 0.7 mm, straight pitch1 % open area(perforated over the edges)
material thicknesswidth of perforation
steel 0.6 mm 1,340 mm
aluminium 0.6 mm 860 mm
aluminium 0.8 mm 1,340 mm
Hole Ø 0.7 mm, straight pitch4 % open area(perforated over the edges)
material thicknesswidth of perforation
steel 0.6 mm 1,340 mm
6.2
6.2
direction of perforation
3.1
3.1
3.1
3.1
direction of perforation
3.1
3.1
direction of perforation
25
Rg 1,6 - 13
Rd 1,6 - 25
Rg 1,8 - 5
Hole Ø 1.6 mm, diagonal pitch (45°)25 % open area
material thicknesswidth of perforation
steel 0.6 mm 860 mm
steel 0.7 mm 1,600 mm
Hole Ø 1.8 mm, straight pitch5 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,280 mm
steel 0.7 mm 1,280 mm
4
4
2
22
2
Hole Ø 1.6 mm, straight pitch13 % open area
material thicknesswidth of perforation
steel 0.6 mm 860 mm
steel 0.7 mm 860 mm
Lindner Perforations
direction of perforation
direction of perforation
7.14
7.14
direction of perforation
26
Rd 1,8 - 10
Rg 1,8 - 19
Rv 1,8 - 20
Hole Ø 1.8 mm, straight pitch20 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,280 mm
steel 0.7 mm 1,280 mm
aluminium 1.25 mm 1,615 mm
Hole Ø 1.8 mm, diagonal pitch (60°)20 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,550 mm
steel 0.7 mm 1,550 mm
aluminium 0.6 mm 880 mm
aluminium 0.7 mm 880 mm
aluminium 0.8 mm 880 mm
3.57
3.57
Hole Ø 1.8 mm, diagonal pitch (45°)10 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,280 mm
steel 0.7 mm 1,280 mm
Lindner Perforations
3.57
3.57
3.57
3.57
direction of perforation
direction of perforation
3.83
3.323.32
direction of perforation
27
Rd 1,8 - 21
Rv 2,0 - 15
Rv 2,0 - 20
Hole Ø 2.0 mm, diagonal pitch (60°)15 % open area
material thicknesswidth of perforation
aluminium 2.0 mm 1,580 mm
Hole Ø 2.0 mm, diagonal pitch (60°)20 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,250 mm
steel 0.7 mm 1,250 mm
aluminium 0.8 mm 1,000 mm
stainless steel
0.6 mm 1,200 mm
stainless steel
0.7 mm 1,200 mm
2.47
2.47
2.47
2.47
4.26 4.26
4.92
Hole Ø 1.8 mm, diagonal pitch (45°)21 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,310 mm
Special perforation
Lindner Perforations
direction of perforation
direction of perforation
4.3
3.72 3.72
direction of perforation
28
Lindner PerforationsRv 2,0 - 25
Hole Ø 2.0 mm, diagonal pitch (60°)25 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,270 mm
steel 0.7 mm 1,270 mm
3.8
3.29 3.29
direction of perforationSpecial perforation
Rd 2,3 - 23
Rg 2,5 - 4
Hole Ø 2.5 mm, straight pitch 4 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,400 mm
steel 0.7 mm 1,400 mm
3 3
33
11
11
Hole Ø 2.3 mm, diagonal pitch (45°)23 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,250 mm
direction of perforation
direction of perforation
29
Rd 2,5 - 8
Hole Ø 2.5 mm, diagonal pitch (45°)8 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,400 mm
steel 0.7 mm 1,400 mm
Rg 2,5 - 165.
5
5.5
direction of perforation
Hole Ø 2.5 mm, straight pitch 16 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,400 mm
steel 0.7 mm 1,400 mm
aluminium 0.8 mm 790 mm
Rv 2,5 - 20
Hole Ø 2.5 mm, diagonal pitch (60°)20 % open area
material thicknesswidth of perforation
steel 0.6 mm 700 mm
steel 0.7 mm 700 mm 5.32
4.61 4.61
direction of perforationSpecial perforation
Lindner Perforations
5.5
5.5
5.5
5.5
direction of perforation
30
Lindner PerforationsRv 2,5 - 32
Rg 3,0 - 4
Hole Ø 2.5 mm, diagonal pitch (60°)32 % open area
material thicknesswidth of perforation
steel 0.6 mm 790 mm
Hole Ø 3.0 mm, straight pitch 4 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,540 mm
steel 0.7 mm 1,540 mm 13
13
Rd 2,8 - 20
Hole Ø 2.8 mm, diagonal pitch (45°)20 % open area
material thicknesswidth of perforation
steel 0.6 mm 650 mm
steel 0.7 mm 650 mm
3.9
3.9
3.9
3.9
direction of perforationSpecial perforation
4.2
3.64 3.64
direction of perforation
direction of perforation
31
Rv 3,0 - 5
Rg 3,0 - 17
Rv 3,0 - 20
Hole Ø 3.0 mm, straight pitch17 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,540 mm
steel 0.7 mm 1,540 mm
aluminium 0.7 mm 650 mm
Hole Ø 3.0 mm, diagonal pitch (60°)20 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,500 mm
steel 0.7 mm 1,500 mm
6.5
6.5
13
1111
6.5
5.5 5.5
Hole Ø 3.0 mm, diagonal pitch (60°)5 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,500 mm
steel 0.7 mm 1,500 mm
Lindner Perforations
direction of perforation
direction of perforation
direction of perforation
32
Rd 3,0 - 30
Rg 3,5 - 28
Rd 5,0 - 35
Hole Ø 3.0 mm, straight pitch30 % open area
material thicknesswidth of perforation
steel 0.7 mm 1,250 mm
Hole Ø 5.0 mm, diagonal pitch (45°)35 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,600 mm
steel 0.7 mm 1,600 mm
3.43
3.43
3.43
3.43
5.3 5.3
5.3
5.3
5.89
5.89
Hole Ø 3.0 mm, diagonal pitch (45°)30 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,250 mm
steel 0.7 mm 1,250 mm
aluminium 2,0 mm 1,520 mm
Special perforation
Lindner Perforations
Special perforation
direction of perforation
direction of perforation
direction of perforation
33
Rd 6,0 - 50
Rd 6,4 - 10
Hole Ø 6.4 mm, diagonal pitch (45°)10 % open area
material thicknesswidth of perforation
aluminium 1.0 mm 1,260 mm
aluminium 1,5 mm 1,260 mm
5.3 5.3
5.3
5.3
12.7 12.7
12.7
12.7
Hole Ø 6.0 mm, diagonal pitch (45°)50 % open area
material thicknesswidth of perforation
steel 0.7 mm 1,270 mm
steel 0,9 mm 1,270 mm
Stainless steel
0.75 mm 1,270 mm
Stainless steel
0,9 mm 1,270 mm
Special perforation
Special perforation
Lindner PerforationsRg 5,0 - 45
Hole Ø 5.0 mm, straight pitch45 % open area
material thicknesswidth of perforation
steel 0.7 mm 1,570 mm
6.61
6.61
direction of perforationSpecial perforation
direction of perforation
direction of perforation
34
6
10.39 10.39
6Rv 7,0 - 30
Hole Ø 7.0 mm, diagonal pitch (60°)30 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,300 mm
steel 0.7 mm 1,300 mm
Rg 7,0 - 27
Hole Ø 7.0 mm, straight pitch 27 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,300 mm
steel 0.7 mm 1,300 mm
12
12
Lindner Perforations
Rg 8,0 - 15
Hole Ø 8.0 mm, straight pitch15 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,250 mm
steel 0.7 mm 1,250 mm
18
18
direction of perforationSpecial perforation
direction of perforation
direction of perforation
35
Rd 8,0 - 25
Rg 12,0 - 11
Hole Ø 8.0 mm, diagonal pitch (45°)25 % open area
material thicknesswidth of perforation
steel 1.0 mm 1,300 mm
steel 1.25 mm 1,300 mm
Hole Ø 12.0 mm, straight pitch 11 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,290 mm
steel 0.7 mm 1,290 mm
10 10
1010
Special perforation
Lindner Perforations
Rd 12,0 - 22
Hole Ø 12.0 mm, diagonal pitch (45°)22 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,290 mm
steel 0.7 mm 1,290 mm
direction of perforation
32
32
direction of perforation
16
16
16
16
direction of perforation
36
Rg 12,0 - 44
Hole Ø 12.0 mm, straight pitch 44 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,290 mm
steel 0.7 mm 1,290 mm
Lindner Perforations
Rs 12,0 - 45
Hole Ø 12.0 mm, diagonal pitch (63.4 %)44 % open area
material thicknesswidth of perforation
steel 0.7 mm 860 mm
1616
1616
direction of perforationSpecial perforation
Rg 24,0 - 50
Hole Ø 24.0 mm, straight pitch50 % open area
material thicknesswidth of perforation
steel 0.6 mm 650 mm
steel 0.7 mm 650 mm
30
30
direction of perforationSpecial perforation
16
16
direction of perforation
37
Qg 4,0 - 645
4 1 4
direction of perforationSpecial perforation
Qg 4,0 - 20
Square hole 4.0 mm, straight pitch20 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,600 mm
steel 0.7 mm 1,600 mm
Lindner Perforations
Qg 5,0 - 25
Square hole 5.0 mm, straight pitch25 % open area
material thicknesswidth of perforation
steel 0.6 mm 900 mm
10
555
Special perforation
Square hole 4.0 mm, straight pitch64 % open area
material thicknesswidth of perforation
steel 1.0 mm 719 mm
direction of perforation
9
4 5 4
direction of perforation
38
Lindner PerforationsQd 6,0 - 15
Square hole 6.0 mm, diagonal pitch (45°)15 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,600 mm
steel 0.7 mm 1,600 mm
Qg 6,0 - 30
Square hole 6.0 mm, straight pitch30 % open area
material thicknesswidth of perforation
steel 0.6 mm 1,600 mm
steel 0.7 mm 1,600 mm
Qg 8,0 - 11
8 16 8
variable
24
direction of perforationSpecial perforationSquare hole 8.0 mm, straight pitchvariable open area (standard 11%)
material thicknesswidth of perforation
steel 0.6 mm 850 mm
steel 0.7 mm 850 mm
steel 1.0 mm 850 mm
direction of perforation
11
11
6 6 65 5
11
66 5
direction of perforation
39
Qg 8,0 - 44
Square hole 8.0 mm, straight pitch44 % open area
material thicknesswidth of perforation
steel 0.6 mm 650 mm
steel 0.7 mm 650 mm
8 84
12
Lindner Perforations
Lg 7 x 3
Slotted round hole 7 x 3 mm, straight pitchvariable open area (standard 19 %)
material thicknesswidth of perforation
steel 0.6 mm 993 mm7
3
3
7
7
3
variable
direction of perforationSpecial perforation
Lg 8 x 50
Slotted round hole 8 x 50 mm, straight pitch, variable open area
material thicknesswidth of perforation
steel 0.6 mm 890 mm
steel 0.7 mm 890 mm
direction of perforation
direction of perforation
50
50
10
8 8 variablemin. 4 up to 200 mm
40
Lg 25 x 3
25 25
33
39
9
5
variable
direction of perforation
Slotted round hole 25 x 3 mm, straight pitch, variable open area
material thicknesswidth of perforation
steel 0.6 mm 636 mm
Lindner PerforationsLg 10 x 45
Slotted round hole 10 x 45 mm, straight pitch, variable open area (standard 36 %)
material thicknesswidth of perforation
steel 0.6 mm 945 mm
steel 0.7 mm 945 mm
1045
1015
1045
variable
direction of perforationSpecial perforation
Lg 14 x 2
Slotted round hole 14 x 2 mm, straight pitch, variable open area (standard 23 %)
material thicknesswidth of perforation
steel 0.6 mm 828 mm 14
22
4.5
4.5
4.5
14
2
variable
direction of perforationSpecial perforation
41
Lge 3,2 x 27
Lge 21 x 4
Slotted square hole 3.2 x 27 mm,straight pitch, variable open area
material thicknesswidth of perforation
steel 0.6 mm 1,500 mm
steel 0.7 mm 1,500 mm
Slotted square hole 21 x 4 mm,straight pitch, variable open area
material thicknesswidth of perforation
steel 0.6 mm 616 mm
steel 0.7 mm 616 mm
21
54
5
21
variable
10
9.5 3.23.2
variable
2727
12.7
Special perforation
Lindner Perforations
Lge 11,9 x 4,2
Slotted square hole 11.9 x 4.2 mm, straight pitch, variable open area (standard 38 %)
material thicknesswidth of perforation
steel 0.6 mm 720 mm11.9
4.2
4
4
11.9
4.2
variable
direction of perforationSpecial perforation
direction of perforation
direction of perforation
42
Lindner Perforations
St 5 x 20 - 57
Elliptic hole 5 x 20 mm, diagonal pitch57 % open area
material thicknesswidth of perforation
steel 0.7 mm 1,000 mm
Lge 30 x 5
Slotted square hole 30 x 5 mm, straight pitch, variable open area (standard 50%)
material thicknesswidth of perforation
steel 0.7 mm 800 mm
aluminium 0.8 mm 1,000 mm
Stainless steel
0.6 mm 1,200 mm
Stainless steel
0.7 mm 1,200 mm
30
55
5
30
53.8
3.8
3.8
3.8
variable
direction of perforationSpecial perforation
Lge 40 x 1
Slotted square hole 40 x 1 mm, straight pitch, variable open area (standard 2 %)
material thicknesswidth of perforation
steel 0.6 mm 840 mm
40
11
40
134
34
10
variable
direction of perforationSpecial perforation
20
10
5
5
direction of perforation
43
Individual perforation layout
Radial arrangement of perforation: for a consistently plain border with non-rectangular ceiling panels (not available for all perforation patterns)
Plain zone within the perforated area of the panel: circumferential plain border around central aperture for light fi xture
Scattered perforation - SPREADline Perforation with multi-panel look: plain borders dividing the ceiling panel visually into more panels
Perforation with multi-panel look: increased open area in the central part of the panel (for ventilation purposes)
Special PerforationsPerforated artwork.
Image perforation - SPREADline Detail
44
TU
_D_P
/E/2
.0
Lindner Concepts:
- Insulation Engineering and Industrial Service- Clean Rooms and Laboratories- Airports and Airlines- Railways and Tunnels- Studios and Concert Halls- Interior Fit-out and Furnishings- Cruise Liner and Ship Fit-out- Hotels and Resorts- General Contracting
Lindner Products:
- Facades- Ceiling Systems- Lights and Lighting Systems- Partition Systems- Doors- Floor Systems- Heating and Cooling Technologies- Dry Lining Systems
Lindner Service:
- Green Building- Deconstruction and Gutting- Clearance of Harmful Substances- Research and Development- Delivery- General Planning- Installation- Maintenance- Public-Private Partnership (PPP)
We can do it all for you.
Lindner
Bahnhofstrasse 2994424 Arnstorf Germany Phone +49 (0)8723/20-36 79Fax +49 (0)8723/20-28 [email protected]
This document is the intellectual property of Lindner, Arnstorf (Germany). All the information contained in this brochure agrees with the information available at the time of its printing and only serves as advance information. Any possible colour deviations there might be from the original product are caused by printing-related reasons. Lindner is the sole and exclusive owner of the copyrights as well as the ancillary copyright. All use, and in particular any distribution, reprinting, exploitation or adaptation of this document shall only be allowed with express, written approval by Lindner.