Upload
hathien
View
226
Download
3
Embed Size (px)
Citation preview
Welcome Guest Register • Login • Lost Password
You are here: Home › Concept, FEED,& Detail Engg. › Techincal
Concept, FEED,& Detail Engineering1. Process Specialist Services & Concept Engineering:
Process Concept development, Facilities Decisions, Determination of installations and Capex preliminary Optimizations
Installations engineering: CPU, onshore, offshore decisions, pipeline optimization, well planning support,
Equipment Development, Option studies and Life cycle value Optimization
Technical deliverables Hysys Simulations, PFD, HMB, P&ID, UFD, Equipment List, and essential deliverables from mechanical, electrical, piping, structure, and
Instrumentation
Technical Risk identification, further options, and strategic advisory to improve designs and installations, exploitation economically.
Pre-FEED & FEED Engineering – Process Engineering, Safety in design, Mechanical Engineering, instrumentation and Controls, Piping Structure and Operations
management, Cost estimates Level 3, Capex/Opex/Life cycle Evaluations.
HOME ABOUT US SERVICES TECHNOLOGIES EXPERIENCE SOFTWARE CONTACT US
Capex Determination (concept stage detailed cost estimates using ICARUS) .
Preliminary MTO, and Level 3/4 cost estimates, High value item RFQ’s,
Concept studies : Typically compression facilities decisions, recompression requirements, Inlet cooling, wax issues, Export Heating requirements, pipeline
insulation requirement, Flow assurance , Hot oil vs steam generation, Hull side heat loss calculations and heating option, Shuttle transfer vs continuous pumping,
sulfur handling, Technology selection for amine Gas sweetening , Acid gas enrichment, sulphur forming etc, Hydrate inhibition and management, dew pointing
facility decisions, option evaluations w.r.t to technological, operational ease, CAPEX/ OPEX/ Life cycle cost, and ease of maintenance and such criteria, layout
decisions, pipeline optimization, CPP location and facility integration studies w.r.t to maximum utilization of existing facilities.
Safety Studies, HAZOP, HAZAN, Layout studies
FEED Engineering package development – PMC support.
2. FEED Engineering: Process Concept studies further development of Process and operations philosophies, design philosophies
Complete Process design with firm decisions on Installations, Design basis, and Equipment design requirements.
Technical deliverables Hysys Simulations, PFD, HMB, P&ID, UFD, Equipment List, and essential deliverables from mechanical, electrical, piping, structure, and
Instrumentation
Complete Control schemes, and operational, functional requirements including safe charts cause and effects.
Third Part Design Reviews and Process Design and Operations Assurance.
Complete multidisciplinary design deliverables – Mechanical, Electrical, Instrument & Controls, Piping, Civil and structure, as required to meet FEED objectives.
Technical Risk identification, further options, and strategic advisory to improve designs and installations, exploitation economically.
Advanced FEED level MTO, and Level 3/4 cost estimates, High value item RFQ’s and quotes backed up by Vendors
FEED level Safety Studies, HAZOP, HAZAN, LOPA, QRA, SIL studies
Detail Engineering Package development, ITB development – PMC support.
3. Detail Engineering: Complete set of deliverables including Process Design Basis, Design Criteria, Equipment detailed designs,line list, and Instrument and control datasheet and
philosophies.
Complete Process design with firm decisions on Installations, Design basis, and Operational requirements.
Third Part Design Reviews and Process Design and operations assurance
Technical deliverables Hysys Simulations, PFD, HMB, P&ID, UFD, Equipment List, and essential deliverables from mechanical, electrical, piping, structure, and
Instrumentation
Complete multidisciplinary design deliverables – Mechanical, Electrical, Instrument & Controls, Piping, Civil and structure, as required to meet Detail engineering
and EPC requirements.
Technical Risk identification, further options, and strategic advisory to improve designs and installations, exploitation economically.
Final MTO, and Level 5 cost estimates, High value item RFQ’s and Vendors quotes, follow up
Engineering, construction, commissioning support
Vendor Follow up, expediting, and interface management
Detailed Safety Studies and/or support for HAZOP, HAZAN, LOPA, QRA, SIL, Noise mapping, vibration mapping studies
Hook up and commissioning support
Operating manual development
PMC support till project closeout.
4. PMC SUPPORT
PMC – for FEED/ EPC stage. Project Management & Control (PMC) support to company/ operators/ Investors
PMC - Assist in developing ITB, Feed deliverables List, studies required, monitor and control FEED contractor’s work to ensure quality FEED.
PMC - FEED studies: Re-Concept studies/ option evaluations, Technology selection,, FEED, deliverables from Process, mechanical, piping, electrical, Instrument,
Civil & Structure, construction, Installations, Procurement support, Initial cost and schedule estimates, determination of equipment, identify major long lead items,
and other technical support
PMC - Specialty studies, such as Flow assurance, Dynamic simulations, FMEA, RAM etc.
PMC – Third Party design Reviews ,
PMC - Secondment of Highly experienced engineers for High end engineering services, as PMC.
PMC- EPC construction Planning/ Vendor management/ Yard works and Operations management during project
PMC – Construction Supervision, Operations Risk work shops, Operations Assurance, and Commissioning control
Contact Information More Pages
E-mail: [email protected]
Address: DEZTEK Engineers & Consultants
GM & Head - Business Development
52, ALIMCO, Vinayakpur, Kanpur
UP State INDIA – 208016
Home
Page Types
Templates
About Us
Services
Projects
Blog
Contact Us
Copyright ©2014 DeztekConsulting.com All Rights Reserved.