Upload
olinda
View
58
Download
1
Tags:
Embed Size (px)
DESCRIPTION
Computational Physics An Introduction to the Geant4 toolkit. Dr. Guy Tel- Zur. An Introduction to the Geant4 toolkit. Many of the slides are from a presentation by: J . Apostolakis , CERN for the Geant4 collaboration. Geant 4. Home page : http://geant4.cern.ch/ - PowerPoint PPT Presentation
Citation preview
Dr. Guy Tel-Zur
1
Computational Physics An Introduction to the Geant4 toolkit
An Introduction to the Geant4 toolkit
Many of the slides are from a presentation by: J. Apostolakis, CERN
for the Geant4 collaboration
Geant4Home page: http://geant4.cern.ch/Important paper:
Geant4 – a simulation toolkitTutorial:
http://indico.cern.ch/conferenceOtherViews.py?view=standard&confId=58317
Live CD: https://twiki.cern.ch/twiki/bin/view/Geant4/Geant4CernVM 3
4
OverviewSimulation packages/toolkits
Key capabilities and conceptsWhat it can do - highlights
Application areasWhat is inside – lightning tour
Brief highlights of capabilities Transparency of results
Open sourceGEANT4: the collaboration
5
What can a simulation package or toolkit do ?A Package provides ‘general’ tools to
undertake (some or all) of the key tasks: tracking, and geometrical propagation modelling of physics interactions, visualization, persistency
and enable you to describe your setup’s detector geometry, radiation source, details of sensitive regions
6
GEANT 4 Detector simulation tool-kit from HEP
full functionality: geometry, tracking, physics, I/O
offers alternatives, allows for tailoringSoftware Engineering and OO technology
provide the architecture & methods for maintaining it
Requirements from: current and future HEP experiments medical and space science applications
World-wide collaboration
7
Key Capabilities ‘Kernel’: create, manage, move tracks
tracking, stacks, geometry, hits, …Extensible, flexible
Physics Processes X-section, final-state models for electromagnetic, hadronic, …
Can be ‘assembled’ for use in an application area Tools for faster simulation
‘Cuts’, framework shower parameterisation Event biasing, variance reduction.
Open interfaces for input/output User commands, visualization, persistency
Brief HistoryGeant4 started as RD44 project
(1994-98) Amongst first OO in HEP, 1st for
simulation Dec 1998: 1st supported release
Geant4.0.0First uses in production in several
fields Space: 1999 XMM (X-ray telescope) HEP: 2001 BaBar, 2004
ATLAS/CMS/LHCbRegular public releases (1-2 per
year) Geant4 release 9.0 (Jun 07), 9.3 (Dec
09) Guy: Dec. 17, 2010: new release:
9.4
8
APPLICATION AREAS
9
HIGH ENERGY PHYSICS
11
BaBar
12
Now simulating PEP beam line as well (-9m < zIP < 9m)
Courtesy of D.Wright (SLAC)
BaBar at SLAC was the pioneer experiment in HEP in use of Geant4 Started in 2000 Simulated several x
1010 events
13
Pion longitudinal shower profile in stand-alone
ATLAS TileCal test-beam at 90o
Data
For Protons : -(20%-40%) at 10 λ.
MC within ~ ±10% up to 10 λ.
Thanks to Atlas Tilecal
14Courtesy: CMSTalk of S. Banerjee, Geant4 Workshop 2009
15
16
Boulby Mine dark matter search Prototype Simulation
Courtesy of H. Araujo, A. Howard, IC London
LXeGXe
PMT
mirror
source
One High Energy event
17Courtesy of V.D.Elvira (FNAL)
Geant4 for beam transportation
AEROSPACE
18
20
g astrophysics
21
g-ray bursts
AGILE GLAST
Typical telescope: Tracker Calorimeter Anticoincidence
g conversion electron interactions multiple scattering d-ray production charged particle tracking
GLAST
GLAST
Bepi Colombo: X-Ray Mineralogical Survey of Mercury
22
Alfonso Mantero, Thesis, Univ. Genova, 2002
Space Environments and Effects Section
BepiColomboESA cornerstone mission to Mercury
Courtesy of ESA Astrophysics
PlanetoCosmicsGeant4 simulation of Cosmic Rays in planetary Atmo-/Magneto- spheres
23
MEDICAL PHYSICS
24
25
26
http://top25.sciencedirect.com/index.php?subject_area_id=21
A QUICK WALK THROUGH GEANT4
27
Key Domains of the Simulation
28
Top Level Category Diagram (part 1)
29
30
Top Level Category Diagram (part 2)
31
Describes a
Setup Hierarchy of volumes Many volumes
repeat Volume & sub-tree
Up to hundreds of thousands of volumes
Importing solids from CAD systems
Navigates in Detector
Locates a point Computes a step
Linear intersection
Geometry: what it does
32
Electromagnetic physicsGammas:
Gamma-conversion, Compton scattering, Photo-electric effect
Leptons(e, m), charged hadrons, ions Energy loss (Ionisation, Bremstrahlung), Multiple scattering,
Transition radiation, Synchrotron radiation, e+ annihilation. Photons:
Cerenkov, Rayleigh, Reflection, Refraction, Absorption, Scintillation
High energy muonsA choice of implementations for most
processes “Standard”: performant when relevant physics above 1 KeV “Low Energy”: Extra accuracy for application delving below
1 KeV
33
Hadronic processesHadronic physics is included in Geant4
a powerful and flexible framework and implementations of physics X-sections &
models.A variety of models and cross-sections
for each energy regime, particle type, material alternatives with different strengths and
computing resource requirementsComponents can be assembled in an
optimised way for each use case.
Openness and ExtensibilityAs a toolkit with open-source code,
Geant4 can be extended in many ways Expected/simple
Creating a new shape (G4VSolid) Unusual, but predicted
New processes, for physics or user action Radical extensions
Reversing time (two ways) Creating ‘on-the-fly’ density for a material
(future) 34
Practical considerations Starting off: what you need
Compatible platform Need CLHEP foundation class library One or more visualisation libraries (possibly from system, e.g. OpenGL)
CLHEP is used for key common classes ThreeVector (G4ThreeVector is a name for CLHEP::HepThreeVector) FourVector Random Number Generators, ..
Coding is needed – except if someone did it for you. Modify existing C++ ‘code’ to describe your setup Create you own class to describe eg a magnetic field.
35
Platforms What works ‘best’ (used by developers, main
testing) Scientific Linux 4 or 5 and gcc 4.3 (HEP production) MacOS 10.5 Leopard
What we also support (tested + numerous users) Windows (XP) & Visual C++
numerous users What we expect to work
Other Linux flavours with gcc 4.1 and 4.3Possibly with fewer options, eg missing some visualisation
What others ‘ported’ and check Sun Solaris
36
GEANT4 COLLABORATION
37
Geant4 Collaboration
38
Collaborators also from non-member institutions, including
IHEPMEPHI Moscow
Jefferson Laboratory
Lebedev
TRIUMF
UK STFCLIP
The Toolkit Examples
39
Three levels:
Hands on!
• Time to get your hands on Geant4– Copy exercises– Your first run of a simple example
• To start, please look athttp://www.ifh.de/geant4/g4course2010
Else, if you have difficulty to reach that usehttp://www-zeuthen.desy.de/geant4/g4course2010
40
41
User: geant, pw: geant2010IP = 192.168.11.128
Example N02This example simulates a simplified fixed target experiment.
1- GEOMETRY DEFINITION
The setup consists of a target followed by six chambers of increasing transverse size. These chambers are located in a region called Tracker region. Their shape are boxes, constructed as parametrised volumes (ChamberParametrisation class).
The default geometry is constructed in DetectorConstruction class. One can change the material of the target and of the chambers interactively via the commands defined in the DetectorMessenger class.
In addition a transverse uniform magnetic field can be applied (see N02MagneticField and DetectorMessenger classes).
42
43
2- PHYSICS LIST
The particle's type and the physic processes which will be available in this example are set in PhysicsList class.
In this example, all the so called 'electromagnetic processes' are introduced for gamma, charged leptons, and charged hadrons (see the method PhysicsList::ConstructEM()).
An important data member of this class is the defaultCutValue which defines the production threshold of secondary particles (only Ionisation and Bremsstrahlung processes are concerned by this CutValue). Notice that the CutValue must be given in unit of length, corresponding to the stopping range of the particle. It is automatically converted in energy for each material, and a table is printed in the method PhysicsList::SetCuts()
In addition the build-in interactive command: /process/(in)activate processName allows to activate/inactivate the processes one by one.
44
3- RUNS and EVENTS
The primary kinematic consists of a single particle which hits the target perpendicular to the input face. The type of the particle and its energy are set in the PrimaryGeneratorAction class, and can be changed via the G4 build-in commands of ParticleGun class.
A RUN is a set of events.
The user has control: -at Begin and End of each run (class RunAction) -at Begin and End of each event (class EventAction) -at Begin and End of each track (class TrackingAction, not used here) -at End of each step (class SteppingAction)
The class SteppingVerbose prints some informations step per step, under the control of the command: /tracking/verbose 1 It inherits from G4SteppingVerbose, and has been setup here in order to illustrate how to extract informations from the G4 kernel during the tracking of a particle.
45
4- USER' LIMITS
We illustrate how to introduce tracking constraints like maximum step length, minimum kinetic energy ..etc.., via G4UserLimits class. See DetectorConstruction and PhysicsList.
5- DETECTOR RESPONSE
A HIT is a record, track per track (even step per step), of all the informations needed to simulate and analyse the detector response.
In this example the Tracker chambers are considered as the detector. Therefore the chambers are declared 'sensitive detectors' (SD) in the DetectorConstruction class.
Then, a Hit is defined as a set of 4 informations per step, inside the chambers, namely: - the track identifier (an integer), - the chamber number, - the total energy deposit in this step, - the position of the deposit.
A given hit is an instance of the class TrackerHit which is created during the tracking of a particle, step by step, in the method TrackerSD::ProcessHits(). This hit is inserted in a HitsCollection. The HitsCollection is printed at the end of event (via the method TrackerSD::EndOfEvent()), under the control of the command: /hits/verbose 1
46
6- VISUALIZATION
The Visualization Manager is set in the main(). The initialisation of the drawing is done via a set of /vis/ commands in the macro vis.mac. This macro is automatically read from the main when running in interactive mode.
The tracks are automatically drawn at the end of event and erased at the beginning of the next run.
The visualization (with OpenGL driver) assumes two things: 1- the visualisation & interfaces categories have been compiled with the environment variable G4VIS_BUILD_OPENGLX_DRIVER. 2- exampleN02.cc has been compiled with G4VIS_USE_OPENGLX.
(The same with DAWNFILE instead of OPENGLX)
47
7- USER INTERFACES
The default command interface, called G4UIterminal, is done via standart cin/G4cout. On Linux and Sun-cc on can use a smarter command interface G4UItcsh. It is enough to set the environment variable G4UI_USE_TCSH before compiling exampleN02.cc
8- HOW TO START ?
- compile and link to generate an executable % cd N02 % gmake
- execute N02 in 'batch' mode from macro files (without visualization) % exampleN02 run1.mac
48
- execute N02 in 'interactive mode' with visualization % exampleN02 .... Idle> type your commands. For instance: Idle> /run/beamOn 10 .... Idle> /control/execute run2.mac .... Idle> exit
Show in editor printout of exampleN02, see file: ./geant/exampleN02_printout.txt
49
The END
51
Resources for more information Geant4 web site
http://cern.ch/geant4/ Geant4 Training Page
http://cern.ch/geant4/support/ and follow “Training” link,
Geant4 training INFN / EM ‘Low-energy’
http://www.ge.infn.it/geant4/training/
Geant4 Workshops and Users Workshops presentations Latest at the home page,
previous at http://geant4.web.cern.ch/geant4/collaboration/meetings_minutes.html#G4workshops
Geant4 Physics WG web sites Which can all be found at
http://cern.ch/geant4/organisation/working_groups.html
Geant4 Low-Energy Electromagnetic WG web site
http://www.ge.infn.it/geant4/lowE/
Geant4 EM (standard) see below
Geant4 Hadronic WG home Papers on G4 and its
validation “Geant4: a simulation
toolkit”, Nucl Instr and Methods A 506 (2003), 250-303
“Validation of GEANT4, an object-oriented MC toolkit for simulations in medical physics” J.F. Carrier et al, Med Phys 32 (2004), p 484.
Note: “Training” page is also directly accessed at http://cern.ch/geant4/milestones/training/training-milestone.html
ElectroMagnetic (standard) WG home page is at http://cern.ch/geant4/working_groups/electromagnetic/electromagneticWG.html
52
Geant4 Capabilities & Use • Kernel: create geometry, hits, …• Physics Processes
– models for EM, hadronics, …– ‘assembled’ into physics lists for application area
• Tools for faster simulation– Shower parameterisation & Event biasing.
• Open interfaces for input/output– User commands, visualization
• Verification and validation for use cases• Using it
– via ready applications (eg GATE)– by starting with examples & customising
54
Acknowledgements
Thanks to those who have contributed-to creating slides for tutorials / talk, that I borrowed
Thanks to all those who have contributed -to the development of Geant4, -to its validation for these and other application areas,
-to those who have applied it -particularly those who have given feedback.
Note that it is a large task to give credit to all of them individually.