Sample Management

Solutions

Genomics, Cell & Analytical

Solutions

Automated Storage Systems

Automated Cryo Storage Solutions

Informatics Solutions

Storage Consumables& Instruments

Comprehensive Sample Lifecycle Management

-80°C LN2 Automated Sample Storage System: Maximum Sample Protection combined with More Cost-Effective Storage

BioStore IIIv is the industry’s leading and only -80°C LN2 automated storage system for sample management. It is built by combining the advanced technologies from the industry leader in sample management automation, Brooks Life Science Systems with the performance of Chart Vario LN2 freezers.

• Disaster Protection: Extended sample hold-time during unplanned disasters or emergencies

• Innocent Sample Protection: The insulating sleeve protects non-targeted samples from warming events

• User Safety: Ergonomic design minimizes PPE requirements and reduces risk

• Fast: Sample retrieval in <60 seconds

• Simple UI: LIMS connectivity and 21-CFR Part 11 compliance

• Secure: Access and inventories restricted to preauthorized users

• Qualification Services: IQ/OQ/PQ available to meet regulatory requirements

Our Industry Leading Automation is the Smarter Solution.

1

20

40

60

80

100

Hou

rs

Typical UprightMechanical Freezer BioStore IIIv

Hold Time to -60ºC

16x longer hold times

North America: +(1) 978-262-2400 Europe: +44 (0) 161 777 2000 Asia-Pacific: +65 3 1576 199

Learn more – www.brooks.com/lifescience Contact us – www.brooks.com/contact

© Copyright 2017 Brooks Automation, Inc. B403-17

Sample Management

Solutions

Genomics, Cell & Analytical

Solutions

Automated Storage Systems

Automated Cryo Storage Solutions

Informatics Solutions

Storage Consumables& Instruments

North America: +(1) 978 262 2400 Europe: +44 (0)161 777 2000 Asia-Pacific: +65 (3) 1576 199

Learn more – www.brooks.com/lifescience Contact us – www.brooks.com/contact

© Copyright 2017 Brooks Automation, Inc. B403-17

Comprehensive Sample Lifecycle Management

BioStore IIIv

Capacity Storage Locations 630 - 2” cryoboxes or equivalent

1.0mL FluidX Cryotubes 123,488

2.0mL FluidX Cryotubes 63,000

Box Level Retrieval Speed <60 Seconds

Labware Types Cryoboxes, SBS racks, Cassettes*

Static Holding Time Vapor 4 days of hold time from -80°C to -60°C

Electrical 110v / 220v

Empty Freezer Weight 2,349 lbs. / 1,067 kg

Maximum Floor Load 113 lbs/ft2 (553 kg/m2)

LN2 Connection Type 1/2” NPT Female Fitting to existing Vacuum Jacket line

LN2 Supply Pressure (open valve) 22-35 psig / 1.52-2.41 bar

LN2 Evaporation Rate/day (nominal) 12.0 L/day

Warranty 1-Year: includes onsite service, travel, and spare parts. (Preventative Maintenance and Wear Parts not included.)

Other Installation & Operator Training Included

INTERPRET DIM AND TOL PERASME Y14.5M - 1994

MANUFACTURE TO BAI DOCUMENTSCM100022 WORKMANSHIP STD 180

UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] DIMENSIONS APPLY AFTER PROCESSING TOLERANCES .X= .1 [2.5] .XX= .01 [0.25] .XXX= .005 [ 0.13] X/X= 1/64 [.4] ANGLES= 1/2SURFACE FINISH: 63 MICROINCHES

REVISIONSREV. DESCRIPTION DATE BY APPROVED

ENTER TEXT

SolidWorks

ENTER TEXT

RAD-1800-01aTYPE

DESIGNED BY:

MODEL NAME:

TREATMENT:

MATERIAL:

CHECKED BY: DATE:

6-3-96

D

C

B

A

1234

D

C

A

1234

DRAWN BY:

THIRD ANGLE PROJECTION

DATE:

OFSHTSCALE:

REVDWG NO.SIZEC

DWG TITLE

SHDW

G NO

11

BIOSTORE IIIC1800

RAD-1800-01a1:24

N/A

RAD-

1800

-01a

1

NOTICE: PROPRIETARY INFORMATIONTHIS DOCUMENT AND THE INFORMATION DISCLOSED HEREIN IS CONFIDENTIAL AND PROPRIETARY TO BROOKS AUTOMATION, INC.IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART; OR DISCLOSEDTO ANY THIRD PARTY, OR USED WITHOUT THE PRIOR WRITTENCONSENT OF BROOKS AUTOMATION, INC. ©

Brooks Biostore III freezers combine the best in sample security, data management and inventory control. Complete control of your LN2 freezer collections is now at your fingertips.

60” (1524mm)

70” 1778mm)

125” 3175mm)

INTERPRET DIM AND TOL PERASME Y14.5M - 1994

MANUFACTURE TO BAI DOCUMENT

SCM100022 WORKMANSHIP STD 180

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES [MM]

DIMENSIONS APPLY AFTER PROCESSING

TOLERANCES .X= .1 [2.5]

.XX= .01 [0.25]

.XXX= .005 [ 0.13]

X/X= 1/64 [.4]

ANGLES= 1/2SURFACE FINISH: 63 MICROINCHES

REVISIONS

REV.

DESCRIPTION

DATE

BYAPPROVED

ENTER TEXTSolidWorks

ENTER TEXTRAD-1800-01a TYPE

DESIGNED BY:MODEL NAME:

TREATMENT:

MATERIAL:

CHECKED BY:DATE:

6-3-96

D

C

B

A

1

2

3

4

D

C

A

1

2

3

4

DRAWN BY:

THIRD ANGLE PROJECTION

DATE:

OF

SHT

SCALE:

REV

DWG NO.

SIZEC

DWG TITLESH

DWG NO

11

BIOSTORE IIIC1800RAD-1800-01a

1:24

N/ARA

D-18

00-01

a1

NOTICE: PROPRIETARY INFORMATION

THIS DOCUMENT AND THE INFORMATION DISCLOSED HEREIN IS

CONFIDENTIAL AND PROPRIETARY TO BROOKS AUTOMATION, INC.

IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART; OR DISCLOSED

TO ANY THIRD PARTY, OR USED WITHOUT THE PRIOR WRITTEN

CONSENT OF BROOKS AUTOMATION, INC. ©

*Labware should be validated with Brooks