Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
MECTA-CEM ORTHOPAEDIC BONE CEMENT
USEr FrIENDLY ■ Precise polymerisation time thanks to highly accurate manufacturing processes.
■ Easy syringe filling due to low viscosity.
SIMPLE MIX, EASY DELIVERY
To facilitate orthopaedic bone cement mixing and delivery, Medacta has recently added into its product portfolio a new, effective cementation kit. This bone cement mixing and delivery system includes:
A VACUUM FOOT-PUMP FOr OPTIMUM CEMENT MIXING
A CLEAr MIXING TUBE
■ with a coloured mixing rod snap point to ensure easy identification after cement mixing
■ with a charcoal filter to limit the emission of fumes
A METALLIC GUN FOr CEMENT DELIVErY
CEMENT PORTFOL IO COMPREHENSIVE PRODUCT RANGE FOR CEMENTED ARTHROPLASTY
Eas y t o as s emble,eas y t o us e andc omp atible with Me c t a - C em ■ Mecta-Cem exists both in standard and low viscosity versions. Standard viscosity
cement (Mecta-Cem 1 and Genta Mecta-Cem 1) is recommended for manual application, whilst low viscosity (Mecta-Cem 3 and Genta Mecta-Cem 3) is preferred for syringe delivery.
[1] Chang Y, Tai CL, Hsieh PH, Ueng SWN, Gentamicin in bone cement – A potentially more effective prophylactic measure of infection in joint arthroplasty. Bone & Joint Research 2013; 2:220-6.
WITH Or WITHOUT ANTIBIOTICS, STANDArD Or LOW VISCOSITY■ Mecta-Cem is available both with and without antibiotics. Genta Mecta-Cem
is pre-blended with 0.8g (1.2%) of Gentamicin sulphate, which has a broad antibacterial spectrum and long lasting antibacterial protection[1].
t (min)
T (°C)20°
1’ 2’ 3’0’ 4’ 5’ 6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’
a b c d e
a - Mixingb - Standing timec - Kneadingd - Working time - Prosthesis insertione - Hardening time
MECTA-CEM 1
T (°C)20°
t (min)1’ 2’ 3’0’ 4’ 5’ 6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’
a b c d e f a - Mixingb - Standing timec - Syringe fillingd - Standing timee - Cement injection - Prosthesis insertionf - Hardening time
MECTA-CEM 3
rAPID MIXINGMecta-Cem has a high powder : liquid ratio, only 30 seconds are required for the initial mixing phase in order to obtain a homogeneous dough free of any trapped air bubbles.
Cement Portfolio Leaflet 99.65.11rev. 00 Last update: April 2014
Medacta InternationalStrada Regina - 6874 Castel San Pietro - SwitzerlandPhone +41 91 696 60 60 - Fax + 41 91 696 60 [email protected] -www.medacta.com
Highly polished double tapered cemented stem with distal centralizer to ensure correct positioning and uniform cement distribution.
CEMENTED HIP PRODUCT RANGE
ectaPlug
■ Completely absorbable plug in biocompatible gelatine■ Ideal fit to the shape of the medullary canal
ectaPlug P E
BrochureHip Knee Spine Navigation
COMPREHENS I V E P RODUCT RANGE FOR CEMENTED ARTHROP LAS TY
For any additional detail please refer to your Medacta local representative.
MÜLLEr TYPE CUP Flat rim cemented cup with circumferential ridges and radial grooves to improve cement adhesion, built on the design of Dr. Müller’s cup. Available in UHMWPE with an inner diameter of 22, 28 and 32 mm.
CHArNLEY TYPE CUPCemented cup based on the well-known concept of Sir John Charnley’s cup. Available in Highcross UHMWPE with both 22 and 28 mm inner diameter.
VErSACEM DOUBLE MOBILITY CUP Double mobility cemented version to address cases of instability. Available in UHMWPE or Highcross UHMWPE both with 22 and 28 mm inner diameter.
FLEXIBLE INSErTEr
CEMENT PORTFOL IO
CEMENT PORTFOL IO
Cemented stem available with the AMIStem System, can be implanted using the same instruments.
Highly polished double tapered cemented stem with distal centraliser to ensure correct positioning and uniform cement distribution.
Q U A D R A - CCemented stem available with the Quadra System,
can be implanted using the same instruments.
CEMENT RESTRICTORS
■ Non-absorbable UHMWPE cement restrictor ■ Disc shape design with spiral slanted cuts ■ Radiopaque wire in stainless steel■ One size fits different medullary canal diameters