Understand what ANSI cut levels mean and the materials that can be used to protect you.

Consider Material

Comprehending Cut Levels

In 2013 there were 186,830 occupational injuries to hands and wrists that involved days away from work.

High Performance Polyethylene (HPPE)

• Pound-for-pound 15 times stronger than steel

• Low-linting and resistant to chemicals, water and ultraviolet light

• Soft material offers superior comfort

Magid XKS® Yarn

• Proprietary engineered blend of stainless steel wire, para-aramid and high-performance fibers

• Delivers up to twice the cut protection of 100% aramid or HPPE materials of a similar weight

• Dark coloration extends service life 3X times longer than other gloves

• Touchscreen compatible

Para-Aramid/Aramid

• Pound-for-pound 5 times stronger than steel

• Lightweight material for superior dexterity

• Inherent flame, heat and cut resistance

• DuPont® Kevlar® is a popular para-aramid synthetic fiber

Magid Aramax® and Aramax XT Yarn

• Proprietary engineered blend of para-aramid, fiberglass and synthetic fibers

• Delivers up to twice the cut and abrasion resistance of 100% aramid or HPPE materials of a similar weight

• Draws sweat and heat away from skin, keeping hands dry, cool and comfortable

There are 5 cut protection performance levels and it is important to use the right cut protection for your application.

ANSI Performance

Level

Weight Needed to Cut Material

(Grams)

0 < 200

1 > 200

2 > 500

3 > 1000

4 > 1500

5 > 3500

Levels are measured by the grams of force required for failure to occur when applied by a standard cutting blade traveling 25mm. Higher levels provide more protection. These performance ratings are classified as ANSI/ISEA 105-2005 from a 0-5 level based on the outcome of the Cut Performance Test (CPPT).

For more on ANSI and EN standards visit: http://bit.ly/1y9kc2W

Cut Protection Guide

Heavy weight Light weight

7 gauge 18 gauge

Lower Gauge Heavier Weight

• Thicker construction• Less dexterity

7Gaug

e

1810 13 15

Higher Gauge Lighter Weight

• Thinner construction• Improved dexterity

Consider Gauge and WeightMachine knits can vary in density. In the glove industry, the number of rows or density of the knitting rows, is called the “Gauge” of the glove.

Item #GP100 Item #KEV4326 Item #GPD583 Item #AX300HV Item #GPD800

ANSI

Cut

1ANSI

Cut

2ANSI

Cut

3ANSI

Cut

4ANSI

Cut

5

Protect Your Hands from Injury

70% of all work-related hand injuries are the direct result of workers not wearing gloves.

magidglove.com800-444-8030marketing@magidglove.comPrinted in the U.S.A. ©2014 Magid Glove & Safety Mfg. Co. LLC. All Rights Reserved. FLYCUTL Rev. 11/14

Choosing the right glove for your application(s) is about

more than just cut levels. The fit, comfort, dexterity and grip all need to be considered

when determining the proper hand protection. Ap

plic

ation

s Gui

de ANSI Cut Level 1 Gloves Assembly, Maintenance, Material Handling and Shipping & Receiving

ANSI Cut Level 2 & 3 Gloves Assembly, Appliance Manufacturing, Automotive, Construction Maintenance, Material Handling and Metal Handling

ANSI Cut Level 4 & 5 Gloves Appliance Manufacturing, Automotive, Construction, Glass Handling, Machining, Metal Handling, Metal Stamping and Paper Production

Consider Coatings

Polyurethane — Most popular and offers best dexterity and tactile sensitivity

Nitrile — Offers best abrasion and puncture resistance

Latex — Provides best overall grip

Polyvinyl Chloride (PVC) — Great abrasion protection, retains flexibility in the cold