Upload
others
View
14
Download
0
Embed Size (px)
Citation preview
Components for CompactorsCatalogue 2016/2017
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type ALU-STAHL / Type ATRIK / Type AVERMANN 1.1 - 1.3
Type BACHMANN / Type BERINGER 2.1 - 2.2
Type HAGEMANN / Type HAUHINCO / Type HUSMANN / Type HÜFFERMANN 3.1 - 3.12
Type KLAUS / Type KNIERIM 4.1 - 4.4
Type L+M LUDDEN+MENNEKES / Type LMS 5.1 - 5.4
Type NAU 6.1
Type OTTO 7.1
Type RIES 8.1 - 8.2
Type TIEK / Type TOLLENSE 9.1 - 9.4
Type WAGNER / Type WERNER & WEBER 10.1 - 10.5
Gas Springs 11.1
Ratchets & Accessories 12.1 - 12.2
Locks & Keys 13.1 - 13.2
Retaining Sprocket / Scraper 14.1
Seals & Accessories 15.1
Door Locking System 16.1
Filter Inserts Made to Specification 17.1
Stickers 18.1 - 18.2
Wear Gauges 19.1
Service Checklist for Compactors 20.1
Order Form 21.1
General Terms & Conditions 22.1
Components for CompactorsCatalogue 2016/2017
Components for BalersCatalogue 2016/2017
Components for GrabsCatalogue 2016/2017
Components for IBCsCatalogue 2016/2017
please see our Catalogues with Components for Compactors, Balers, Grabs and IBCs for further Products
Index
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €464 400 Sliding Block 200x30x50mm Synthetic Material 12,00
Article-No. Product Dimensions Additional Information Price €469 701 Sliding Block 495x70x48mm Synthetic Material 39,20
Article-No. Product Dimensions Additional Information Price €469 700 Guide Profile 1698x60x140mm Synthetic Material 202,00
Type ALU-STAHL
Type ATRIK
70495
48
469 701
200
50
464 400
30
1698 60
140
8
27
469 700
88
Type
ALU
-STA
HL
/ Typ
e AT
RIK
1.1
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
1.2
Article-No. Product Dimensions Additional Information Price €460 000 Guide Profile 495x100x50mm left, Synthetic Material 41,00460 005 Guide Profile 495x100x50mm right, Synthetic Material 41,00
Article-No. Product Dimensions Additional Information Price €460 022 Sliding Block 807x75x30mm Synthetic Material 23,71
55
90 30
460 020
Article-No. Product Dimensions Additional Information Price €460 020 Sliding Block 90x30x55mm short, Synthetic Material 8,13460 021 Sliding Block 325x30x100mm long, Synthetic Material 17,28
Article-No. Product Dimensions Additional Information Price €460 010 Guide Profile 680x160x50mm left, Synthetic Material 58,56460 015 Guide Profile 680x160x50mm right, Synthetic Material 58,56
Type AVERMANN
80710x45o
30
75
10x45o460 022
100
325 30
460 021
100
50
852
495
460 000
8,5
8,5
1515
353 25
30
112
53
50
160
680
460 010
8,5
1515
88
8,5
240 240 10298 25
30
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type
AVE
RMA
NN
1.3
Type AVERMANN
620/810
10x45o
30
75
10x45o
460 026 /-025
2000 50
90
460 024
Article-No. Product Dimensions Additional Information Price €460 026 Sliding Block 620x30x75mm Synthetic Material 21,75460 025 Sliding Block 810x30x75mm Synthetic Material 25,72460 024 Sliding Block 2000x50x90mm Synthetic Material 58,00
Article-No. Product Dimensions Price €460 090 Filter Insert 27-57-200mm 31,26
460 090
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
2.1
Article-No. Product Dimensions Additional Information Price €463 453 Sliding Block 465x20x50mm for Apron Plate, Synthetic Material 12,20463 450 Sliding Block 640x20x50mm for Apron Plate, Synthetic Material 14,78
463 454
145
1495
140
35
135
1950 40
463 452
Article-No. Product Dimensions Additional Information Price €463 454 Sliding Block 1495x35x145mm for Compaction Plate, bottom, Synthetic Material 71,00463 452 Sliding Block 1950x40x135mm for Compaction Plate, Synthetic Material 82,00
Article-No. Product Dimensions Additional Information Price €463 451 Guide Profile 148x75x90mm for Compaction Plate, Synthetic Material 29,90
Article-No. Product Dimensions Additional Information Price €463 460 Bolt 35x144mm 42CrMo4, induction hardened 29,00463 461 Bolt 35x234mm 42CrMo4, induction hardened 34,00
Type BACHMANN
465/640 20
50
463 453 /-450
20
50
100
463 451
5025 32
90
8014
75
148
13
20
25
13
25
144463 460
120
35
8
234463 461
210
35
8
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type
BA
CHM
AN
N /
Type
BER
ING
ER
2.2
Article-No. Product Dimensions Additional Information Price €460 049 Guide Profile 1384x45x75mm Synthetic Material 63,48460 050 Guide Profile 1850x45x75mm Synthetic Material 80,75460 051 Spring for Guide Profile 40x18x1,5mm galvanized, 5 needed for one Guide Profile 1,60
Type BERINGER
Article-No. Product Dimensions Additional Information Price €460 053 Guide Profile 1300x50x60mm Synthetic Material, for X6 55,00460 054 Guide Profile 500x50x60mm Synthetic Material, for X6 23,00
20050400
6024
500460 054
50
35
18
1014
11
12200
50
35
18
1014
11
1220050
1200
6024
1300
460 053
200 200 200 200 200
460 051
1,540
18
460 049
1384
100 300292292300 90
14
45
75
1020
23
460 050
1850
90 502333333502 80
14
45
75
1020
23
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
460 400
5030
77
2116
16
7
95
1800
21
460 401
67
200030
50
77
1621
16
Article-No. Product Dimensions Additional Information Price €460 400 Guide Profile 1800x50x95mm Synthetic Material, OEM 01.1822 111,00
Type HAGEMANN
3.1
Article-No. Product Dimensions Additional Information Price €460 401 Guide Profile 2000x50x67mm Synthetic Material, OEM 90.0475 98,00
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €462 904 Guide Profile 1490x50x100mm Synthetic Material 88,00
Article-No. Product Dimensions Additional Information Price €462 910 Guide Profile 705x57x105mm Synthetic Material, for 632 840.7, HK 8-12 68,00
Article-No. Product Dimensions Additional Information Price €462 900 Guide Profile 1520x45x88mm Synthetic Material, for 631 776.6, HK 8-12 74,00
Article-No. Product Dimensions Additional Information Price €462 895 Guide Profile 710x60x105mm Synthetic Material 46,00462 896 Sliding Block 160x160x40mm Synthetic Material 11,80
462 896
40160
160
Type HAUHINCO
Type
HA
GEM
AN
N /
Type
HAU
HIN
CO
3.2
462 895
105
710
20
6025
57
1120
,642
,2
17
1820705
60 12510
570 60
125 125 125 125
462 910
22
149050 280 275
50
30
16
1222
88
53
5022
280280280
462 904
18
6,5
11 17
451520325 325 325 325
462 900
8851
25
15
100
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
12183
M16
40
464 702 464 703
50
60
13
t=10
80
Article-No. Product Dimensions Additional Information Price €462 890 Filter Insert 30-67-90mm 27,01464 702 Cylinder Bolt 40x183mm 42CrMo4, hardened 36,00464 703 Securing Plate 80x60x10mm S235JR 10,80
Article-No. Product Additional Information Price €462 920 Folding Shackle S355J2 426,00
Type HAUHINCO
462 890
50
216
893 60
145 o
2x43,5
817
249,
5
462 920
R75
3.3
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
160
169
115
35 35
68
75
74
462 125
1070
570
921
961
1000
Article-No. Product Additional Information Price €462 125 Hydraulic Cylinder double-acting, 300bar, SPB/SEL 712,00
160
169
115
35 35
68
1220
820
75 1071 74
1111
1150
462 120
Article-No. Product Additional Information Price €462 120 Hydraulic Cylinder double-acting, 300bar, SPB/SEL 722,00
1600
1123143492 74
160
169
115
35
35
68
1530
1474
462 100
Article-No. Product Additional Information Price €462 100 Hydraulic Cylinder double-acting, 300bar, SPB/SEL 748,00
Type HUSMANN
Type
HAU
HIN
CO /
Type
HU
SMA
NN
3.4
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Additional Information Price €462 126 Hydraulic Cylinder for HKV, primed, 300bar, Stroke 335mm 416,00
Article-No. Product Dimensions Additional Information Price €462 130 Guide Profile 1200x48x95mm left, SPB12 AN, Synthetic Material 57,70462 135 Guide Profile 1200x48x95mm right, SPB12 AN, Synthetic Material 57,70
Article-No. Product Dimensions Additional Information Price €462 140 Guide Profile 1350x40x95mm left, SPB12 AN, Synthetic Material 55,00462 145 Guide Profile 1350x40x95mm right, SPB12 AN, Synthetic Material 55,00
Type HUSMANN
3.5
462 126
645
585
30
75
123
60
73
35
35
60
3540321
462 130
150 450 50
1100
450
27
48
95
9
18
3016
16
40
150 415 415 370
1350
462 140
95
18
30
279
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
27
462 150
150 415 155
1550
415415
Article-No. Product Dimensions Additional Information Price €462 150 Guide Profile 1550x40x60mm left, SPB SEN/SE, Synthetic Material 45,00462 155 Guide Profile 1550x40x60mm right, SPB SEN/SE, Synthetic Material 45,00
Article-No. Product Dimensions Additional Information Price €462 160 Guide Profile 1550x40x95mm left, SEN SPB/SE, Synthetic Material 64,00462 165 Guide Profile 1550x40x95mm right, SEN SPB/SE, Synthetic Material 64,00
Article-No. Product Dimensions Additional Information Price €462 171 Guide Profile 2040x40x145mm left, for Apron Plate, PA6 151,00462 172 Guide Profile 2040x40x145mm right, for Apron Plate, PA6 151,00
Type HUSMANN
Type
HU
SMA
NN
3.6
60
9269
99
4127
16,5
30
40
50145
462 171
40
30475
2040
475 475475 110
40
18
30
16
27
150 135 415 155
1550
462 160
200 80 415
95
16
40
18
30
9
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Price €462 180 Stud M12-30-25mm 1,60462 100 01 Plain Bearing 35-39-35mm 1,91462 100 02 Plain Bearing 35-39-70mm 2,20
35
115 M6
462 191
70
35
M6
462 192
70
462 100 12
68
100 290
5022
83
35t=30
462 100 11
50
35
60 205
t=30
90
462 100 13
83
35633
50 50o
t=30
35
Article-No. Product Dimensions Additional Information Price €462 100 11 Cylinder Plate 205x90mm t=30mm, SEL 24,00462 100 12 Cylinder Plate 290x83mm t=30mm, SEL 29,00462 100 13 Cylinder Plate 356x83mm t=30mm, SEN 36,00462 192 Bolt 35x70mm HKV, 42CrMo4, hardened 20,25462 191 Bolt 35x115mm HKV, 42CrMo4, hardened 27,01462 190 Bolt 35x135mm SPB back, 42CrMo4, hardened 27,01462 193 Bolt 35x218mm SPB front, 42CrMo4, hardened 31,51
462 205 /-204 /-203 /-197 /-199
80
37
3
480/600/650/695/750
Article-No. Product Dimensions Additional Information Price €462 202 Sliding Block L=480mm Compaction Plate, Synthetic Material 21,03462 205 Bracket L=480mm Compaction Plate, S355J2 9,00462 201 Sliding Block L=600mm Compaction Plate, Synthetic Material 24,20462 204 Bracket L=600mm Compaction Plate, S355J2 9,60462 200 Sliding Block L=650mm Compaction Plate, Synthetic Material 26,17462 203 Bracket L=650mm Compaction Plate, S355J2 10,40462 207 Sliding Block L=695mm Compaction Plate, Synthetic Material 28,25462 197 Bracket L=695mm Compaction Plate, S355J2 16,00462 198 Sliding Block L=750mm Compaction Plate, Synthetic Material 30,11462 199 Bracket L=750mm Compaction Plate, S355J2 14,00
Type HUSMANN
3.7
218
35
462 193
48
88,5
462 202 /-201 /-200 /-207 /-198
42
8514x45o
14x45o
480/600/650/695/750
35
135 13
M8
48
462 190
8,5
462 180
30 M12
25
39
70
35
462 100 0235
3539
462 100 01
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
462 211
455
48
56
10x45o460
50
50
10x45o
462 206
Article-No. Product Dimensions Additional Information Price €462 206 Sliding Block 460x50x50mm Synthetic Material 17,00462 194 Pressing Plate 440x40mm t=4mm, S355J2 3,60462 211 Sliding Block 455x56x48mm Synthetic Material 26,00
462 195
110
t=5
75
462 196
1845
t=5
75
Article-No. Product Dimensions Additional Information Price €462 195 Pressing Plate 110x75mm t=5mm, S355J2 4,40462 196 Pressing Plate 1845x75mm t=5mm, S355J2 26,00
462 216
1830
85
50
Article-No. Product Dimensions Additional Information Price €462 217 Sliding Block 1475x42x85mm Synthetic Material, for Compaction Plate 72,00462 216 Sliding Block 1830x50x85mm Synthetic Material 67,00
Article-No. Product Dimensions Additional Information Price €462 209 Sliding Block 120x85x40mm Synthetic Material, SEN 20 9,00462 208 Sliding Block 1845x85x40mm Synthetic Material, SEN 20 63,00
462 208
85
40
1845
8x45o
462 209
85120
40
8x45o
Type HUSMANN
40
462 194
t=4
440
Type
HU
SMA
NN
3.8
462 217
1475
85
42
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €462 220 Roller, complete 30-159-120/130mm left, Lubrication, Brass Bushing 121,55462 221 Roller, complete 30-159-120/130mm right, Lubrication, Brass Bushing 121,55462 222 Roller, complete 40-159-120/130mm left, Lubrication, Brass Bushing 123,00462 223 Roller, complete 40-159-120/130mm right, Lubrication, Brass Bushing 123,00
Article-No. Product Dimensions Additional Information Price €462 226 Roller, complete 30-159-120/130mm Lubrication, Brass Bushing 92,29462 225 Roller, complete 30-159-300/310mm Lubrication, Brass Bushing 103,54462 227 Roller, complete 40-159-120/130mm Lubrication, Brass Bushing 94,00462 228 Roller, complete 40-159-300/310mm Lubrication, Brass Bushing 105,00
Article-No. Product Dimensions Additional Information Price €462 235 Welding Plate 170x81mm t=10mm, S355J2, for Door Locking System 30,38
Type HUSMANN
155/362
30/4
0
120/300
240
278
200
462 226 /-225 /-227 /-228
170
37 49
81
31
15,5
t=10
462 235
3.9
159
374
294
462 220 /-222
159
290
280153
240
120
30/4
0
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €462 230 Folding Shackle, complete Delivered in Parts 246,39454 163 Lifting Bar 50x345x1090mm R75, cold-formed, S355J2 111,36462 230 02 Locking Plate 3,38462 230 03 Reinforcing Plate 280x180mm t=10mm, with 2 Bores 15,99462 230 04 Bushing 52-70-70mm 12,38462 230 05 Bolt 50x180mm 11,02462 230 06 Reinforcing Plate t=15mm 15,99462 230 08 Handle for Bolt 3,60
Article-No. Product Dimensions Additional Information Price €462 262 Folding Shackle 312x165mm S355J2 298,00462 263 Folding Shackle 312x174mm S355J2 298,00
Type HUSMANN900 282
50
408
462 230
970315 30
20
166,553
4
25 o
462 250
Article-No. Product Dimensions Additional Information Price €462 250 Folding Shackle, complete 403,14462 251 Folding Shackle 50x410mm S355J2 203,69454 202 Bolt 50x96mm left, with chain 15,53454 202 01 Bolt 50x96mm right, with chain 15,53462 253 Bolt 50x105mm 14,41
Type
HU
SMA
NN
3.10
5070
506
31220
462 262
316
165
236,8
70
5050
6
31220
462 263
320
174
236,8
312,
7
7070
50
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
462 261
Article-No. Product Additional Information Price €462 261 Folding Shackle S355J2 236,90
462 292
40 22
195
Article-No. Product Dimensions Price €462 292 Filter Insert 22-40-195mm 33,10462 291 Filter Insert 32-58-176mm 32,63462 290 Filter Insert 20-40-195mm 33,10
462 291
58 32
176
Type HUSMANN
462 290
40 20
195
462 273 /-271 /-272 /-270
Article-No. Product Dimensions Additional Information Price €462 273 Gas Spring Total Length L=508mm 2000N, Stroke 300mm, with Screw Eye 37,08462 271 Gas Spring Total Length L=510mm 1500N, Stroke 200mm, with Screw Eye, OEM Nr. 01908020 37,08462 272 Gas Spring Total Length L=510mm 1750N, Stroke 200mm, with Screw Eye, OEM Nr. 01908025 37,08462 270 Gas Spring Total Length L=750mm 2000N, Stroke 300mm, with Screw Eye 41,15
3.11
587
580485
200
51
51
290
30
508/510/750
50
Article-No. Product Additional Information Price €452 502 Bracket for Gas Spring with Pin, Cotter, Washer 6,75
25
70
13
64
26
25
70
13
452 502
13
38
20
NEU
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €470 010 Roller, complete 30-159-300/310mm 144,05
Article-No. Product Dimensions Additional Information Price €470 020 Folding Shackle 346,70470 021 Bolt 35x300mm with Handle 24,72
Type
HU
SMA
NN
/ Ty
pe H
ÜFF
ERM
AN
NType HÜFFERMANN
340
5014
180
315
470
20 90160 35
35
470 020
390
300 150
470 021
3.12
470 010
30 51 159
300407
374255
120
35
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €463 400 Angle Guide 695x50x50mm left, Synthetic Material 41,49463 401 Angle Guide 695x50x50mm right, Synthetic Material 41,49
Article-No. Product Dimensions Additional Information Price €463 405 Sliding Block 1500x60x15mm Synthetic Material 22,19
15
50
15
50120/170/410/520
463 408 /-407 /-406 /-409
Article-No. Product Dimensions Additional Information Price €463 408 Angle Guide 120x50x50mm bottom, Synthetic Material 11,00463 407 Angle Guide 170x50x50mm bottom, Synthetic Material 11,84463 406 Angle Guide 410x50x50mm top, Synthetic Material 20,52463 409 Angle Guide 520x50x50mm top, Synthetic Material 25,00
Type KLAUS
1500 15
463 405
60
4.1
463 400
12,5
15
695 50
15154154 154154 50
5020
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €463 410 Guide Profile 275x54x59mm bottom left/right, Synthetic Material 25,40463 411 Guide Profile 80x41x32mm Synthetic Material 20,10463 412 Guide Profile 85x32x43mm top left/right, Synthetic Material 19,20
Article-No. Product Dimensions Additional Information Price €463 420 Guide Profile 1333x54x59mm Synthetic Material 61,00
463 425
M12
60
1530
20 40
Article-No. Product Dimensions Additional Information Price €463 425 Catch 60x40x20mm Steel, galvanized 48,00
59
54275
2119
463 410
463 411
32
21
4180
5,5
21
463 412
43
85
2111
32
20
Type
KLA
USType KLAUS
59
98
25
1333 54
35463 420
4.2
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €464 720 Guide Profile 710x55x110mm for Compaction Plate, Synthetic Material 64,00
Article-No. Product Dimensions Additional Information Price €464 721 Guide Profile 1520x45x88mm for Apron Plate, Synthetic Material 86,00
Article-No. Product Dimensions Additional Information Price €464 718 Guide Profile 1660x50x94mm Synthetic Material 84,00
Type KNIERIM
4.3
110 325
1520
88
3816
17
25
4,5
16
45
11
325 325 325
464 721
710
125
17
20
117111
0 21
55 125 125 125 125
464 720
16
146,
29
6,2
20
10 3050
94
166025 395 410 410 395 25
464 718
9
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €464 723 Guide Profile 854x58x105mm Synthetic Material 71,00
70
160
160
464 722
Article-No. Product Dimensions Additional Information Price €464 724 Sliding Block 105x58x57mm Synthetic Material 15,00464 722 Sliding Block 160x160x70mm for Compaction Plate, Synthetic Material 20,40
Type
KN
IERI
MType KNIERIM
4.4
464 724
105
66
17
57 5811
14
464 723
105
17
70
20,5
12
854
23110 110 110 110 110 110110
58
2218
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type L+M LUDDEN + MENNEKES
Article-No. Product Dimensions Additional Information Price €463 500 Folding Shackle, complete 382,63463 510 Folding Shackle S355J2 209,33463 520 Bolt 40x86mm left, with chain 14,85463 520 01 Bolt 40x86mm right, with chain 14,85463 521 Bolt 40x104mm with Bore for Pin 14,41
Article-No. Product Dimensions Additional Information Price €463 530 Plate 125x100mm t=16mm, S235JR 11,02
Article-No. Product Dimensions Price €463 590 Filter Insert 40-97-215mm 41,12
463 590
5.1
100
125
12
t=16
463 530
70
925
410
50
463 500260
210
200
214
30
140
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €463 540 Guide Profile 1215x50x100mm Synthetic Material 68,00
Article-No. Product Dimensions Additional Information Price €463 543 Sliding Block 420x50x100mm Synthetic Material 22,90
695/1840 50
100
463 542 /-541
Article-No. Product Dimensions Additional Information Price €463 542 Sliding Block 695x50x100mm Synthetic Material 33,00463 541 Sliding Block 1840x50x100mm Synthetic Material 83,00
Type
L+M
LU
DD
EN +
MEN
NEK
ESType L+M LUDDEN + MENNEKES
5.2
12 822
50100
82216
53
1215
116550 280 275280
30
50
463 540
18
420 50
100
10x45o
463 543
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
463 547 /-546
175 30/40
45
Article-No. Product Dimensions Additional Information Price €463 547 Sliding Block 175x30x45mm Synthetic Material 7,40463 546 Sliding Block 175x40x45mm Synthetic Material 8,90
463 561
90
1840
t=5
Article-No. Product Dimensions Additional Information Price €463 561 Flat Steel 1840x90mm t=5mm, S355J2 18,60
8
35
80
463 560
680
463 562
40
175
t=5
Article-No. Product Dimensions Additional Information Price €463 570 Bolt 34,9x210mm M30x1,5mm, 42CrMo4, hardened 39,40463 562 Flat Steel 175x40mm t=5mm, S355J2 2,40463 560 Angle Guide 680x80x35mm t=8mm, S355J2 15,00
Type L+M LUDDEN + MENNEKES
5.3
SW38
463 570
30x1
,5210
8
34,9
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
20 80120
16
930
468 010
50 350450
20
13
40
11
468 020
Article-No. Product Dimensions Additional Information Price €468 010 Sliding Block 120x16x30mm Synthetic Material 14,27468 005 Angle Guide 250x62x50mm Synthetic Material 16,00468 020 Sliding Block 450x20x40mm Synthetic Material 15,00
468 027
125
21,5
82
250 50
35
468 026
1800 40
100
150 40
100
Article-No. Product Dimensions Additional Information Price €468 025 Sliding Block 150x40x100mm Synthetic Material 10,20468 026 Sliding Block 1800x40x100mm Synthetic Material 73,00468 027 Guide Profile 250x50x125mm Synthetic Material 38,00
Type
L+M
LU
DD
EN +
MEN
NEK
ES /
Typ
LMSType LMS
5.4
250 41
50
468 005 62
15
468 025
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €467 900 Guide Profile 1600x42x100mm Synthetic Material 110,00
Article-No. Product Dimensions Additional Information Price €467 901 Guide Profile 600x40x100mm Synthetic Material 38,00
Type NAU
6.1
1600
20
42
32
810
1814467 900
100400100 400 300 300
100
20
600
125 50
467 901
11
42
40
1850 125125125 15
100
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Additional Information Price €463 600 Folding Shackle S355J2 256,59
Type
NAU
/ Ty
p O
TTOType OTTO
7.1
25
500576
R50
50
100
265
450
300
463 600
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €464 200 Sliding Block 805/760x80x55mm Synthetic Material 44,73
Article-No. Product Dimensions Additional Information Price €464 201 Sliding Block 1952x25x352mm Synthetic Material 101,39
Article-No. Product Additional Information Price €464 220 Folding Shackle S355J2 324,12
Type RIES
1952 25
352
464 201
R50
90o
135 o
R75
15o
249369
15
120
630
180
50
520
645
41 60
464 220
760 45 80
10
55
464 200
8.1
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type
RIE
S
464 202
685
55
80
Article-No. Product Dimensions Additional Information Price €464 202 Sliding Block 685x80x55mm Synthetic Material, SP85 49,00
464 203
1475
255
25
Article-No. Product Dimensions Additional Information Price €464 203 Sliding Block 1475x25x255mm Synthetic Material, SP85 118,70
Article-No. Product Dimensions Additional Information Price €464 210 Lid Detent 234x62mm t=8mm, S355J2, galvanized 8,60
Type RIES
12
32
R6
205
234464 210
t=8
1210
3062
8.2
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €464 500 Folding Shackle, complete D=50mm S355J2 348,00464 510 Folding Shackle D=50mm S355J2, for 464 500 242,00464 520 Bolt D=40mm 14,41
Type TIEK
Article-No. Product Dimensions Additional Information Price €464 530 Folding Shackle D=50mm S355J2 238,00
275+/-2
212
200
383
335+/-2
30
560
464 530
41
50
200
750
464 500
9.1
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
1600
464 521
14
100
463 590
Article-No. Product Dimensions Additional Information Price €464 521 Sliding Block 1600x14x100mm Synthetic Material 58,80
Type
TIE
K
9.2
Type TIEK
Article-No. Product Dimensions Additional Information Price €463 590 Filter Insert 40-97-215mm 41,12
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €464 700 Guide Profile 1050x47x88mm Synthetic Material 66,00
Article-No. Product Dimensions Additional Information Price €464 705 Guide Profile 120x57x95mm Synthetic Material 19,00464 711 Guide Profile 120x57x105mm Synthetic Material 22,00
Article-No. Product Dimensions Additional Information Price €464 710 Guide Profile 855x57x105mm Synthetic Material, HK 20.1 78,00
60586110
464 708
60
464 709
1357
11 18
99
50
106
Article-No. Product Dimensions Additional Information Price €464 709 Guide Profile 106x57x50mm Synthetic Material 13,10464 708 Sliding Block 605x60x110mm Synthetic Material 46,00
Type TOLLENSE
1325
12070
1895
22
464 705
57
55
20
18
88
47
464 700
60 60310 310 3101050
11 187,
5
17
24
37
57
1325
,5
12024,5
24,5
105
464 711
21,5
2025
71
18
20,5
25855
105
57
464 710
60110 110 110 110 110 110 110
11
1821
9.3
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type
TO
LLEN
SE
94
25 400 400 400 400 25
1650
1496,
2
20
3010
50
464 715
Article-No. Product Dimensions Additional Information Price €464 715 Guide Profile 1650x50x94mm Synthetic Material 86,00
Article-No. Product Dimensions Additional Information Price €464 716 Sliding Block 160x160x52mm Synthetic Material, HK 20.1, 8-12 12,34
Article-No. Product Dimensions Additional Information Price €464 702 Cylinder Bolt 40x183mm 42CrMo4, hardened 36,00464 703 Securing Plate 80x60x10mm S235JR 10,80464 704 Catch 125x25x25mm for Apron Plate, HK 20.1 14,80
Article-No. Product Dimensions Additional Information Price €464 706 Scraper 1015x80mm t=15mm, left, S235JR 97,00464 707 Scraper 1015x80mm t=15mm, right, S235JR 97,00
Type TOLLENSE
160
160 52
464 716
12,5
25
100
464 704
25
125
M1025
12183
M16
40
464 702 464 703
50
60
13
t=10
80
14
80
290575150351015
15
464 706
4015
9.4
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €465 050 Bolt 40x340mm M16, 42CrMo4 38,26
Article-No. Product Dimensions Additional Information Price €465 020 Bolt 35x160mm M14, 42CrMo4 28,14465 010 Bolt 35x230mm 42CrMo4, WPLM IV rear, Surface Hardened 25,88
Article-No. Product Dimensions Additional Information Price €465 055 Bolt 35x127mm M16, 42CrMo4 29,26465 035 Bolt 35x145mm M16, 42CrMo4, WPLM IV front, Surface Hardened 27,72465 030 Bolt 35x145mm M14, 42CrMo4 28,14
Type WAGNER
340
M1640
465 050
45
8 8
35
M14
160
465 020
30
35
M16
127
465 055
40
35230
465 010
8,5 8,5
35
145
465 035
35
M16
35
145
465 030
35
M14
10.1
465 090 465 091 462 290
Article-No. Product Dimensions Additional Information Price €465 090 Filter Insert 25-95-140mm WPLM 34,94465 091 Filter Insert 60-115-165mm P2.1217-21 46,13462 290 Filter Insert 20-40-195mm 33,10
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type
WA
GN
ER
194110
t=4
79
21
465 040 01
t=12
194110
59
465 040 02
Article-No. Product Dimensions Additional Information Price €465 040 Guide Profile 198x123x53mm F 89274, Synthetic Material 26,00465 040 01 Plate 194x79x4mm top 3,21465 040 02 Plate 194x59x12mm bottom 4,61
Article-No. Product Dimensions Additional Information Price €465 015 Bolt for Track Roller 25x104mm M24, S355J2, WPLM II+IV 36,92465 016 Track Roller 30,5/46-62-29mm PA6, WPLM II+IV 15,52
Type WAGNER
198110
17
53
60 80123
465 040
17 16
21
M24
30104
465 015
26,5 49
30
SW14 44
10.2
465 016
29
46 30,5
3 3
62
465 016
465 015
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €465 060 Folding Shackle, complete D=50mm S355J2, Made to Specification 441,15465 061 Folding Shackle D=50mm S355J2, Made to Specification 315,11
Type WAGNER
10.3
Article-No. Product Dimensions Additional Information Price €465 062 Bolt D=40mm passend für Klappbügel 465 060 und Bügel 465 061 14,41
Article-No. h in mm L in mm AmountORDER FORM (Please copy and fill out. On Request this Form can be send to you by Email or Fax)
465 060
465 061
L
50
20
180
465 061
3542
hL
465 060
20 20
180
50
42
35h
40
145
107
465 062
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Type
WA
GN
ER /
Type
WER
NER
& W
EBER
Article-No. Product Additional Information Price €465 250 Folding Shackle S355J2 238,00465 251 Folding Shackle S355J2 238,00
Article-No. Product Additional Information Price €465 255 Folding Shackle ACTS, S355J2 288,00
Type WERNER & WEBER
50540 387
R75 50
420
465 255
100
52,5
52,5
10.4
365340
255
R200
R100
50
470
465 250
150
55
91
435
52,5
52,5
385375
218
R200
R100
50
510
465 251
165
52
100
465
52
52
NEU
Article-No. Product Dimensions Additional Information Price €400 113 Roller 42,7-120-60mm ACTS, S355J2, Full Sleeve Tubing 28,95400 121 Shaft 40x150mm ACTS, S355J2, with Lubrication 12,90
40
75150
400 121
42,7
120
60
400 113
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
465 203
1768 110
40
465 200
650
45
48
465 202
40
148
110
Article-No. Product Dimensions Additional Information Price €465 202 Sliding Block 110x148x40mm Synthetic Material 14,00465 203 Sliding Block 1768x110x40mm Synthetic Material 84,00465 200 Sliding Block 650x48x45mm Synthetic Material 26,00465 201 Sliding Block 650x60x30mm Synthetic Material 12,00
Article-No. Product Dimensions Additional Information Price €465 204 Guide Profile 2000x64x120mm left, Synthetic Material 198,00465 205 Guide Profile 2000x64x120mm right, Synthetic Material 198,00
Article-No. Product Dimensions Additional Information Price €465 206 Guide Profile 1425x64x120mm left, Synthetic Material 139,00465 207 Guide Profile 1425x64x120mm right, Synthetic Material 139,00
Type WERNER & WEBER
465 206
3647
120
13
9
26
9
20
9
2811
6440
1425
460325 460 180
46046095 410
465 201
650 60
30
13
99
911
2826
20
64
465 204
3647
2000
600
600
450
600150 600
600
120
350
50
40
10.5
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Gas Springs
Type
WER
NER
& W
EBER
/ G
as S
prin
gs
11.1
Article-No. Product Dimensions Additional Information Price €462 273 Gas Spring B=508mm Type HUSMANN, 2000N, Stroke 300mm, with Screw Eye 37,08462 271 Gas Spring B=510mm Type HUSMANN, 1500N, Stroke 200mm, with Screw Eye, OEM Nr. 01908020 37,08462 272 Gas Spring B=510mm Type HUSMANN, 1750N, Stroke 200mm, with Screw Eye, OEM Nr. 01908025 37,08462 270 Gas Spring B=750mm Type HUSMANN, 2000N, Stroke 300mm, with Screw Eye 41,15
Article-No. Product Additional Information Price €452 502 Bracket for Gas Spring with Pin, Cotter, Washer 6,75
25
70
13
64
26
25
70
13
452 502
13
38
20 t=E
8,1
F
C
G
B
H
A
t=I JD2
D1
8,1
NEU
Article-No. Spring Force N Stroke C Length A Length B Cylinder D1 Piston Rod D2 Attachment of Eye Price €452 500 250 100 201 300,5
22 10
E = 12 F = 17 G = 17 H = 17 I = 12 J = 17
Eyes screwed on
20,09452 505 500 20,09452 510 250
150 295 444,5
23,14452 515 500 23,14452 520 750 23,14452 525 1000 23,14452 530 250
200 305 504,5
24,53452 535 500 24,53452 540 750 24,53452 545 1000 24,53452 550 250
250 402 651,5
26,67452 555 500 26,67452 560 750 26,67452 565 1000 26,67452 571 500
300
451 750,529,27
452 575 750 29,27452 580 1000
450 749,5
28 14
35,61452 585 1250 35,61452 590 1500 35,61452 595 500
400 496,5 896,5
49,35452 600 750 49,35452 605 1000 49,35452 610 1250 49,35452 615 1500 49,35452 620 2000 49,35452 625 250
100 185 285
22 10
E = 5 F = 15 G = 15 H = 16,5 I = 5 J = 15
Eyes welded on
20,23452 630 500 20,23452 635 250
150 235 385
23,49452 640 500 23,49452 645 750 23,49452 650 1000 23,49452 655 1150 23,49452 660 250
200 285 485
24,51452 665 500 24,51452 670 750 24,51452 675 1000 24,51452 680 1150 24,51452 685 250
250 335 585
27,05452 690 500 27,05452 695 750 27,05452 700 1000 27,05452 705 1150 27,05452 710 500
300 385 685
29,83452 715 750 29,83452 720 1000 29,83452 725 1150 29,83452 730 500
400 490 89034,62
452 735 750 34,62452 740 950 34,62
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
12.1
260/300/380150/180/210
M24
/30/
36/4
8
457 513 /-514 /-571 /-572 /-576 /-577 /-578 /-579
131327
30
12104
457 515
280
6436
100
457 508 10
Article-No. Product Dimensions Additional Information Price €457 513 Screw-End Weding Lead M24x260mm Left-Hand Thread 3,74457 514 Screw-End Weding Lead M24x260mm Right-Hand Thread 3,74457 571 Screw-End Weding Lead M30x260mm Left-Hand Thread 6,37457 572 Screw-End Weding Lead M30x260mm Right-Hand Thread 6,37457 576 Screw-End Weding Lead M36x300mm Left-Hand Thread 12,51457 577 Screw-End Weding Lead M36x300mm Right-Hand Thread 12,51457 578 Screw-End Weding Lead M48x380mm Left-Hand Thread 25,68457 579 Screw-End Weding Lead M48x380mm Right-Hand Thread 25,68457 515 U-Profile 104x30mm 2,91457 508 10 Hook 280x37mm galvanized 39,94
Article-No. Product Dimensions Additional Information Price €457 510 Ratchet L1=255mm, L2=270mm M24, Handle L=250mm, for Compactor, galvanized 98,00457 500 Ratchet L1=255mm, L2=320mm M24, Handle L=300mm, for Compactor, galvanized 104,00457 501 Ratchet L1=200mm, L2=270mm M20, Handle L=250mm, for Compactor, Type LOTUS, galvanized 92,00457 508 Ratchet L1=255mm, L2=320mm M30, Handle L=300mm, for Compactor, galvanized 104,00457 502 Ratchet L1=390mm, L2=320mm M48, Handle L=300mm, for Static Compactor, galvanized 210,00457 509 Ratchet L1=295mm, L2=320mm M36, Handle L=300mm, for Compactor, galvanized 158,00457 509 05 Ratchet L1=295mm, L2=456mm M36, complete with Clevises, galvanized 280,00457 496 Ratchet L1=255mm, L2=560mm M24, for Container, Type HÜFFERMANN 228,58457 499 Ratchet L1=650mm, L2=320mm M30, Handle L=300mm, for Static Compactor, galvanized, without Clevises 255,44
Ratchets
Screw-End Weding Leads
L2
L1
457 502 /-509 /-509 05
L1
L2
457 499
L2
L1
457 510 /-500 /-501 /-508
457 496
M24 RH560
255
106
M24 LH
457 509 05
295
456
t=37
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
12.2
Ratc
hets
/ Sc
rew
-End
Wed
ing
Lead
s / T
hrea
ded
Eyes
/ Cl
evis
es
M48
185
335
58
133
457 544 /-545
M36
160265
457 542 /-543
M30
71
135
30
215457 538 /-539
M20
100165
24
52
457 535 /-536
70
M24
33
134213
457 511 /-512
M20
210190
110
23
457 531 /-532 M16
Article-No. Product Dimensions Additional Information Price €457 535 Threaded Eye M20 d=24mm, Left-Hand Thread, galvanized 7,88457 536 Threaded Eye M20 d=24mm, Right-Hand Thread, galvanized 7,88457 511 Threaded Eye M24 d=33mm, Left-Hand Thread, galvanized 9,46457 512 Threaded Eye M24 d=33mm, Right-Hand Thread, galvanized 9,46457 538 Threaded Eye M30 d=30mm, Left-Hand Thread, galvanized 17,80457 539 Threaded Eye M30 d=30mm, Right-Hand Thread, galvanized 17,80457 542 Threaded Eye M36 d=43mm, Left-Hand Thread, galvanized 19,48457 543 Threaded Eye M36 d=43mm, Right-Hand Thread, galvanized 19,48457 544 Threaded Eye M48 d=58mm, Left-Hand Thread, galvanized 36,00457 545 Threaded Eye M48 d=58mm, Right-Hand Thread, galvanized 36,00457 531 Clevis M20 Left-Hand Thread, galvanized, with Bolt and Nuts 11,67457 532 Clevis M20 Right-Hand Thread, galvanized, with Bolt and Nuts 11,67457 528 Clevis M24 Left-Hand Thread, galvanized, forged, with Bolt and Nuts 13,50457 529 Clevis M24 Right-Hand Thread, galvanized, forged, with Bolt and Nuts 13,50457 516 Clevis M24 Left-Hand Thread, galvanized 9,46457 517 Clevis M24 Right-Hand Thread, galvanized 9,46457 540 Clevis M24 Left-Hand Thread, galvanized, forged, with Locking Lug, Bolt and Nuts 26,48457 541 Clevis M24 Right-Hand Thread, galvanized, forged, with Locking Lug, Bolt and Nuts 26,48457 555 Clevis M30 Left-Hand Thread, galvanized, forged, with Locking Lug, Bolt and Nuts 34,79457 556 Clevis M30 Right-Hand Thread, galvanized, forged, with Locking Lug, Bolt and Nuts 34,79457 533 Clevis M30 Left-Hand Thread, galvanized, with Bolt and Nuts 19,01457 534 Clevis M30 Right-Hand Thread, galvanized, with Bolt and Nuts 19,01457 509 101 Clevis M36 Left-Hand Thread, galvanized, forged, with Bolt and Nuts 58,00457 509 111 Clevis M36 Right-Hand Thread, galvanized, forged, with Bolt and Nuts 58,00
Threaded Eyes / Clevises
43
95
32
50
M24
M24
150255
280
457 540 /-541
46
75
M30
M30
205330
370
457 555 /-556
457 516 /-517
155
14
12
79
M24
256268
465428
250 100
M36 52
457 509 101 /-111
M36
M30
260290
160
34
457 534 /-533
M24
60
M24 29 57
38215
125
457 528 /-529
M20
240
Measurements are approximate, Technical Adjustments may be made
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Multi-Purpose 9 Way Key, zinc die-cast, nickel-plated. With 5 adaptors for opening various square, triangular or double-key bit locks like Waste Bins, Street Bollards, Barrier Posts, Street Lamps, Service Cabinets, Arm Barriers, Access Panels, Valves, etc.
Universal key with the following key systems:
- External double-bit 3 mm - External double-bit 5 mm - Internal square 8 mm - Internal triangular 9 mm
Attachable adaptors with the following key systems:
- Internal triangular 7 mm - Internal triangular 8 mm - Internal square 6 mm - Internal square 7 mm - External square with range 5 mm to 10 mm
The key and the adaptors are linked by a ball chain.
Article-No. Product Additional Information Price €452 475 Multi-Way Key Zinc Die Casting, 9 Functions, 5 Adapters 23,69
Multi-Way Key with 9 Functions
13.1
Internal Square 6mm
External Square 8mm
External Square 8mm
Internal Square 7mm
External Square 8mm
External Square 5-10mm
Internal Square 8mm
External Double-Bit 5mm
External Double-Bit 3mm
Internal Triangle 9mm
External Triangle 9mm
Internal Triangle 8mm
External Triangle 9mm
Internal Triangle 7mm
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Price €469 300 Double Bit key 3x14mm Zinc Die Casting 1,99469 304 Double Bit key 5x14mm Zinc Die Casting 2,10469 301 Square Key 6x11,5mm internal, Zinc Die Casting 1,99469 302 Square Key 8x14,2mm internal, Zinc Die Casting 1,99452 471 Triangular Key 8,3x14,2mm internal, L=81mm, Zinc Die Casting 1,90452 471 01 Triangular Key 8,5x14,5mm internal, L=130mm, Zinc Die Casting 2,80452 471 02 Triangular Key 8,5x12mm internal, L=100mm, galvanized 2,50
Mul
tifu
nkti
onss
chlü
ssel
/ Lo
cks
& K
eys
89
50
3,514 469 300
81
50
6,311,5 469 301
81
50
8,3
14,2469 302
45
31,5
9
3
14,5
58,5469 320
45
9 31,5
8
8
58,5469 310
45
931
,5
8
8
58,5469 315
Article-No. Product Dimensions Additional Information Price €469 320 Double Bit Lock 3mm 45mm Tongue, Cranking 9mm, galvanized 8,78469 310 Square-Headed Lock 8mm 45mm Tongue, Cranking 9mm, galvanized 8,78469 315 Triangular Lock 8mm 45mm Tongue, Cranking 9mm, galvanized 8,78
50
8,3
14,2
81
452 471
Locks & Keys
13.2
130
50
452 471 01
8,5
14,510
08,5
452 471 02 12
63
89
50
5,514 469 304
NEU
NEU
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Retaining Sprocket / Scraper
340
12050
12
50
20
Article-No. Product Price €469 105 Retaining Sprocket 30,41
Article-No. Product Dimensions Additional Information Price €/Meter469 000 Plastic Sheet 80x10mm transparent, 5m Bundle 15,08
10
19
82,5
2511
1
75/40 10/12x1601750/2000
125 125 125 125469 100 /-101
4080
175075 160
11xM12
75160 160 160 160160160160160 160
469 099
Article-No. Product Dimensions Additional Information Price €469 100 Scraper 218,5x1750mm 319,62469 101 Scraper 218,5x2000mm 352,22469 099 Mounting Rail 1750x80mm t=15mm, for Scraper 469 100 118,00469 098 Mounting Rail 2000x80mm t=15mm, for Scraper 469 101 121,00
469 105
10
80469 000
14.1
75/40
4080
2000
40 160
13xM12
160 160 160 160160160160160 160
469 098
40160 160
218,
5
t=15
t=15
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Reta
inin
g Sp
rock
et /
Scra
per
/ Sea
ls /
Profi
les
for
Seal
s
15.1
Seals / Profiles for Seals
459 113
21,6
33,4
18
18 12
33
18
459 133
459 209
18,7
10,7
14,6
verformbarmax. 10mm
920
30
459 132
462 212
125
125
2,5
1823
500/2200
21822
15
462 213 /-210
502
10
462 215 4,5
1100250 250 250 250 50
1100
10
9
2427
462 214 5,5
50 250 250 250 250 50
Article-No. Product Dimensions Additional Information Price €459 209 Combination Sealing Profile 24,0x14,6mm self-clamping, 25m Bundle, formable max. 10mm 6,80
Article-No. Product Dimensions Additional Information Price €462 215 Anchoring Plate 1100x10x2mm galvanized, for Seal 459 133 7,00
Article-No. Product Dimensions Additional Information Price €462 212 U-Profile 15x23x2,5mm 90°, S355J2, for Seal 459 113 12,61462 213 U-Profile 500x22x15x2mm for Seal 459 113 3,38462 210 U-Profile 2200x22x15x2mm for Seal 459 113 9,39
Article-No. Product Dimensions Additional Information Price €459 113 Seal Profile for Compactor 21,6x33,4mm 20m Bundle 10,18
Article-No. Product Dimensions Additional Information Price €459 133 Sealing Profile for Container Tailgates 18x33mm 25m Bundle 5,80
Article-No. Product Dimensions Additional Information Price €462 214 Guide Profile 1100x27x9mm Steel, galvanized, for Seal 459 132 8,03
Article-No. Product Dimensions Additional Information Price €459 132 Sealing Profile for Container Tailgates 20x30mm 30m Bundle 5,75
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Article-No. Product Dimensions Additional Information Item/Set Price €/Item469 200 Rotary Arm 400x80x16mm S355J2 3 38,26469 201 Welding Plate 260x150x12mm S355J2 6 31,51469 202 Socket Bolt 30x53mm S355J2 3 2,66469 203 Welding Bolt 30x40mm S355J2 3 2,38469 204 Locking Bar 1600x400mm S355J2 1 158,68469 205 Mounting Bolt 295x115mm long, S355J2 2 21,38469 206 Mounting Bolt 200x60mm short, S355J2 1 15,96469 217 Welding Platet 180x16mm S355J2 1 16,40457 510 Ratchet 255x270mm M24, Handle L=250mm, for Compactors, galvanized 1 98,00457 528 Clevis M24 Left-Hand Thread, galvanized, forged, with Bolt & Nuts 1 13,50457 529 Clevis M24 Right-Hand Thread, galvanized, forged, with Bolt & Nuts 1 13,50
469 210
53
30469 202
469 203
4030
469 201
295
115
16
30
469 205
30,5
400
R16
80t=16
469 200
t=16
760
1600
40040
30,580
760
469 204
30,5
30,5
80
40
Door Locking System
16.1
260
30,5
150
R16
t=12
200 30
60
16469 206
469 217
21 140
t=16100
R40
180
21
Article-No. Product Additional Information Price €469 210 Door Locking System, complete Type AVERMANN 677,76
270
457 510
255
469 217
457 528
457 510
457 529
M24
2957
73
215
125
457 528 /- 529 M20
240
140
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Türv
erri
egel
ung
/ Filt
er In
sert
s
Type C
L
D1
D2
D3
Filter Inserts
Article-No. Product Additional Information Price €469 450 Filter Insert Made to Specification, delivery time on request on request
Type B
L
D1
D2
D3
Type A
L
D1
D2
D3
Type D1 D2 D3 L Filter Cartridge Number Filter Housing Number Amount
O-Ring, inside Flat Seal, outside without Seal
Seal Type
Glass Paper Metal
Filter Material
17.1
Compactor Type Year
ORDER FORM (Please copy and fill out. On Request this Form can be send to you by Email or Fax)
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Aufkleber
Article-No. Product Dimensions Stickers/Sheet Quantity for discounts Price €/Sticker459 201 Data Plate Aluminum-Sticker 195x97mm 3 3-48/51-192/ab 195 5,85/4,85*/3,32*459 200 Data Plate Aluminum-Sticker 95x65mm 8 8-48/56-192/ab 200 1,10/0,98*/0,89*459 200 1 Data Plate Aluminum 100x70mm 1 1-50/51-199/ab 200 3,40/2,70*/2,40*459 219 PVC-Sticker 90x90mm 6 6-48/54-204/ab 210 0,90/0,77*/0,70*459 216 PVC-Sticker 297x210mm 1 1-50/51-199/ab 200 2,20/1,75*/1,60*459 222 PVC-Sticker 95x105mm 6 6-48/54-204/ab 210 0,63/0,55*/0,50*459 224 PVC-Sticker 95x105mm 6 6-48/54-204/ab 210 0,63/0,55*/0,50*459 220 PVC-Sticker 210x150mm 1 1-50/51-199/ab 200 0,90/0,77*/0,70*459 255 PVC-Sticker 148x110mm 4 Preis auf Anfrage459 221 PVC-Sticker 95x40mm 15 15-60/75-195/ab 210 0,41/0,33*/0,23*459 226 PVC-Sticker 95x40mm 15 15-60/75-195/ab 210 0,49/0,39*/0,27*459 225 PVC-Sticker 95x40mm 15 15-60/75-195/ab 210 0,49/0,39*/0,27*459 235 PVC-Sticker D=75mm 6 6-48/54-204/ab 210 0,47/0,41*/0,37*459 236 PVC-Sticker D=30mm 48 48/96-192/ab 240 0,27/0,22*/0,18*459 231 PVC-Sticker D=75mm 6 6-48/54-204/ab 210 0,47/0,41*/0,37*459 238 PVC-Sticker D=30mm 48 48/96-192/ab 240 0,27/0,22*/0,18*459 234 PVC-Sticker D=75mm 6 6-48/54-204/ab 210 0,47/0,41*/0,37*459 232 PVC-Sticker D=30mm 48 48/96-192/ab 240 0,27/0,22*/0,18*459 233 PVC-Sticker D=75mm 6 6-48/54-204/ab 210 0,47/0,41*/0,37*459 237 PVC-Sticker D=30mm 48 48/96-192/ab 240 0,27/0,22*/0,18*459 243 PVC-Sticker D=75mm 6 6-48/54-204/ab 210 1,10/1,00*/0,85*459 242 PVC-Sticker D=30mm 48 48/96-192/ab 240 0,36/0,30*/0,26*
459 200459 201
18.1
459 219459 200 1
NEU
459 216
459 243 459 242
459 233 459 237
459 232459 234
459 238459 231
459 236459 235
aus BGR 186 wird DGVU
459 222
459 224
459 220
459 226 459 225459 221
459 255
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
459 217
459 218
459 205
Article-No. Product Dimensions Stickers/Sheet Quantity for discounts Price €/Sticker459 215 PVC-Sticker 297x210mm 1 1-50/51-199/ab 200 2,20/1,75*/1,60*459 217 PVC-Sticker 297x210mm 1 1-50/51-199/ab 200 2,20/1,75*/1,60*459 227 PVC-Sticker 297x210mm 1 1-50/51-199/ab 200 3,07/2,67*/2,43*459 218 PVC-Sticker 297x210mm 1 1-50/51-199/ab 200 2,02/1,87*/1,59*459 214 PVC-Sticker 297x210mm 1 1-50/51-199/ab 200 2,20/1,75*/1,60*459 212 PVC-Sticker 210x150mm 2 2-50/52-198/ab 200 1,45/1,25*/1,10*459 213 PVC-Sticker 210x150mm 2 2-50/52-198/ab 200 1,45/1,25*/1,10*459 257 PVC-Sticker 210x150mm 2 1,25459 205 PVC-Sticker 210x150mm 2 2-50/52-198/ab 200 0,97/0,84*/0,75*
459 215
459 227
459 212
459 213459 214
Aufkleber
Auf
kleb
er
18.2
459 257
NEU
On Request Stickers can also be produced according to Customer Specification
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
19.1
Article-No. Product Additional Information Price €454 091 Wear Gauge V4A Plate, wear limit of 10% 29,87
Article-No. Product Additional Information Price €454 092 Wear Gauge V4A Plate, for Container Inspection according to BG 29,87
454 092
454 091
soll 60 / ist 54 soll 35/ ist 31,5
soll 50 / ist 45
soll 30 / ist 27
soll 4
0/ is
t 36
soll 45 / ist 40,5
Wear Gauge for Container Inspection according to BG
The Wear Gauge in 2mm V2A Plate has 6 Gap Gauges for checking admis-sible wear limits in accordance with BG:
- Lifting Bars on Skips and mobile Compactors- Bearing Bolts on Skips- Suspension Trunnions on Skips
The Wear Wear Gauge enables a quick and secure test of the above named components within the framework of container inspections. Se-lect the respective gap gauge according to the nominal dimension for the lifting bar, bearing pin or suspension trunnion. If it is possible to slide the guage over the diameter of the tested part, it no longer conforms with safety requirements!
Convenient: The Wear Wear Gauge has 2 holes in it which allow it to be stored in the company inspection file.
DE-Utility Model 20 2009 002 403.2
The Wear Gauge in 2mm V2A Plate has 6 Gap Gauges for checking admis-sible wear limits of 10%:
- Lifting Bars on Skips and mobile Compactors- Bearing Bolts on Skips- Suspension Trunnions on Skips
The Wear Wear Gauge enables a quick and secure test of the above named components within the framework of container inspections. Se-lect the respective gap gauge according to the nominal dimension for the lifting bar, bearing pin or suspension trunnion. If it is possible to slide the guage over the diameter of the tested part, it no longer conforms with safety requirements!
Convenient: The Wear Wear Gauge has 2 holes in it which allow it to be stored in the company inspection file.
DE-Gebrauchsmuster 20 2009 002 403.2
Wear Gauge for checking admissible wear limits of 10%
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
Service Checklist for Compactors
Company
Cost Centre
ManufacturerTypeFabrication-No.Construction YearService, Day
Wea
r G
auge
s / S
ervi
ce C
heck
list
for
Com
pact
ors
Mechanical & Hydraulic System
oknot ok
Threaded Pipe Connections, Tighten
Hydraulikzylinder, Dichtheit
Hydraulic Cylinder, Seal
Pump, Seal
Tube/Pipe, Damage
Oil Level
Maximum Oil Pressure
Oil Filter
Filter Housing
Advance Warning/ Malfunction Warning
Solenoid Valve/Valve Block
Preßstempel, Funktion
Pusher Plate, Operation
Polyamide Track
Dirt Scaper
Lubrication Points
Moving Parts, Smooth Running
Visual Inspection
oknot ok
Mounting Bracket, Wear
Mounting Trunnion
Compactor Body, Welding Seam
Weight Bearing Parts, Welding Seams
Rollers/ Gantry/ Pin, Wear
Discharge Door, Seal
Hinges, Operation/Lubrication
Locking System, Operation
Electrical Machine Installations
oknot ok
Control Panel, watertight
Control Panel, Damage
Control Panel, Mounting
Motor Connection, Terminals
Motor, Mounting
Main Switch, Operation
Emergency Circuit Breaker, Operation
Control Relay, Mounting
Control Contactor, Main Contactor
Rotary- Pressure Switch, Mounting
Buttons/Bulbs, Operation
Control Fuse, Contact/Fit
Motor Circuit Breaker
Wiring, Damage
Power Supply Line, Damage
CEE Plugs, Damage
Measurement in acc with VDE
Visual Inspection, Lettering
oknot ok
Hazard Signs, Legibility
Operating Manual, Legibility
Data Plate, Legibilty
UVV, next Inspection
Place, date Signature
Notes Notes
Oil Change Yes No
20.1
On request this Service Checklist can be send to you free of charge by email or fax
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
16.1
Item No. Description Piece Price per Unit € Total Price, net
Invoice Address
Contact PersonFunctionPhone No.Fax No.E-Mail
Delivery Address
DateOrder No.Additional Information
Over-Night Express Next Day Express Normal Delivery
Signature, Company Stamp Name in Capital Letters
Payment:10 days with a discount of 2%: 30 days netFor further Terms of Payment and Delivery see the General Terms and Conditions Total Price, net
19 % MwSt. (VAT-Value added tax)Total Amount
Order Form Head Office +49 (0)30 / 200 05 78-80 Sales +49 (0)30 / 200 05 78-81
Fax +49 (0)30 / 200 05 78-99 E-Mail [email protected] Internet www.rewald.eu
Richard-Wagner-Strasse 51 | 10585 Berlin | Germany
Stand 05082016
© Rewald GmbH. All rights of distribution, print or copy, also in the form of extracts, are reserved. Rights Reserved to make Technical Adjustments. Products only for intended use. Measurements in Millimeter. No liability is taken for printing errors.
17.1
1. The customer declares himself in agreement with our standard terms and conditions when placing an order. Failure of the customer to reveal any particular terms of business on their side does not in any way imply our consent to them. In particular, the delivery or provision of services does not constitute implied acceptance of the customer’s terms and conditions. Alterations, supplementary agreements and additions to the Standard Terms of Business require our written con-firmation.
2. All offers are subject to change and are non-binding. All documents relating to these offers, including figures, drawings, weights or dimen-sions and including any other technical information and references to technical standards and designs merely indicate the object of the agreement and are subject to written confirmation of technical prop-erties. All prices are quoted for deliveries ex-factory including load-ing in factory and excluding standard packaging and VAT. Our offers are based on the latest technical developments, the relevant accident prevention regulations, safety regulations etc at the time of making the offer.
3. For content and scope of the contract our written confirmation of the order is definitive. Supplementary agreements, additions etc re-quire our written confirmation.
4. We only accept prepayment. Our request minimum value is 50 Euro.
5. In the event that after closing of contract we become aware of cir-cumstances which substantially bring the credit-worthiness of the customer into question, or if payment terms are not met, we are en-titled to demand at our discretion payment in advance of any liabili-ties arising out of the business relationship or to ask for appropriate securities.
6. If circumstances arising out of our control, including but not limited to operational disturbances, strikes or lock-outs, freight disruption and any other unforeseeable shortages which occur with our suppli-ers, and which cause the failure or delay of consignments or services, we reserve the right to deliver at a later date or to withdraw wholly or partly from the contract without the customer having the right to claim damages. In the event of a delay in delivery or services the cus-tomer is entitled to withdraw from the contract after the expiry of a reasonably extended deadline of at least 2 weeks. Any withdrawal from contract must take place through written declaration.
7. All shipments are insured. A statement of any damages or short-ages to the consignment must be drawn up immediately after receipt. Liability for the risk of accidental damage passes to the purchaser when the consignment is handed over to the freight carrier, but at the latest when the consignment leaves the warehouse. Specific shipping instructions of the customer are only binding if agreed to in writing. Otherwise delivery will be made as we deem best and under exclusion of any liability for the choice of mode of shipment. Shipment takes place at the expense of the buyer. For orders within Germany with a minimum net value of 770 Euro freight delivery will not be charged.
8. The following conditions apply to our warranty and liability for defects in delivery or service, including incorrect delivery or perfor-mance: any claims must be made in writing within one week of receipt of goods or services. In the event of justified complaint, excluding the absence of guaranteed qualities, we reserve the right to remedy the defective delivery or service within a reasonable space of time. Where applicable, we may recall the defective goods and supply a replace-ment; we will not assume responsibility for the costs of assembly, disassembly, or installation. The customer is obliged to allow us the opportunity for rectification during normal working hours by prior agreement.
9. We retain title to all goods supplied pending full and complete pay-ment and until all present and future claims arising out of the busi-ness relationship have been met. If the customer acquires sole or shared ownership on the basis of the joining, combining, mixing or processing of our consignment (with other consignments) then we shall have ownership to the ratio of the value of our consignment in relation to the other goods with which it is joined, combined or mixed. Any treatment or processing is covered according to Paragraph 950 BGB without any obligation on our part. Furthermore is any resale prohibited.
10. Only goods specifically listed on the delivery note can be returned. Goods which have been damaged are non-returnable. The cost and risks of return freighting of the returned goods will be borne by the customer. Returned goods will be refunded less a deduction of 20% of the purchase price.
11. The relinquishing of claims against the customer which are due to us in the business relationship is excluded.
12. We will only be liable for deliberate or gross negligence of our agents and senior management, or vicarious agents and assistants. Otherwise any claims for damages arising from fault during the contract negotiations, from actual breach of contract, arising out of a punishable act, or contractual rights ( such as consultation or information about qualities, applications, service requirements etc) are ruled out. In particular we will only be liable for consultations for which a separate payment was agreed.
13. Place of dispatch for all shipments and payments is Berlin, Ger-many. Sole place of jurisdiction is Amtsgericht Berlin-Charlottenburg.
14. The contractual relationship is governed by German law. The ap-plication of the uniform law governing the international purchase of movable objects is excluded.
15. Should any of the above stated provisions be either fully or in part invalid, the validity of the remaining provisions of contract shall not in any way be affected.
Prices marked with * cannot be reduced further.
Ord
er F
orm
/ G
ener
al T
erm
s an
d Co
ndit
ions
REW
ALD
Gm
bHGeneral Terms & Conditions REWALD GmbH
Office Richard-Wagner-Straße 51 | 10585 Berlin | Germany
Warehouse Hafenstraße 1 |16727 Velten | Germany
Head Office +49 (0)30 2000 578 - 80
Sales +49 (0)30 2000 578 - 81
Fax +49 (0)30 2000 578 - 99
E-Mail [email protected]
Internet www.rewald.eu