72

COMPLETE RIFLE KITS - Model 1 Sales: · ly analyzing and testing the latest in AR developments so we can offer ... COMPLETE RIFLE KITS ... 11 1/2" Commando SBR 30 1/2" 27 1/4" 5 lbs.14

Embed Size (px)

Citation preview

Page 2 MODEL "1" SALES Tel: 903-546-2087

Quality AR Products at Affordable PricesFor over 20 years Model 1 Sales has been a leading source of U.S. made,mil-spec AR15/M16 component parts and tactical accessories. We arecommitted to improving your tactical advantage by offering the mostinnovative and best value AR platform components available. Our com-ponents, parts and accessories are in use by civilians, law enforcementpersonnel and other government agencies throughout the world.

The Latest in Innovative, Proven ProductsWhether it's expanding our caliber options, offering a more effectivetactical rail system or improving speed and accuracy, we are continuous-ly analyzing and testing the latest in AR developments so we can offeryou only the items that perform as advertised. Our goal is to becomeyour first source of AR tactical components and accessories.

Knowledgeable, Responsive Customer ServiceAt Model 1 Sales your purchases are supported by knowledgeable anddedicated tactical shooting enthusiasts. For product questions, you cancall, e-mail or visit our website.

24/7 Shopping on Our Secure WebsiteOur e-commerce site is always open and readywhen you are! For an easy and enjoyableshopping experience, visit oursecure e-commerce site atwww.model1sales.com.

P.O. Box 569, Whitewright, TX 75491 • Tel: 903-546-2087, Fax: 903-546-6346

Secure Online Ordering: www.model1sales.com

Fax: 903-546-6346 www.model1sales.com Page 3

MODEL "1" SALESP.O. Box 569 • Whitewright,TX 75491 Tel: 903-546-2087 • Fax: 903-546-6346

Master Card,Visa,AMEX or Discover accepted or send Certified Checkor Money Order. Add approximate shipping, extra will be refunded.Texas residents add 8.25% sales tax. Prices and specifications subject tochange without notice. All NFA rules apply, void where prohibited by law.

Secure Online Ordering: www.model1sales.com

COMPLETE RIFLE KITSVarmint Rifle Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 5 - 624 Inch Tactical Rifle Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 65.56mm and 6.8 SPC SPR Kits . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7Standard Rifle Kits / OCMP Rifle Kits . . . . . . . . . . . . . . . . . Pages 8 - 9C.A.R. Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 10 - 11Dissipater Rifle Kits / XM177 Style C.A.R. Kits . . . . . . . Pages 12 - 13EM-4 C.A.R. Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14M-16 Commando Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15Pistol Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16Complete Rifle Kit Options & Upgrades . . . . . . . . Pages 17 - 18Ban Compliant Rifle Kits . . . . . . . . . . . . . . . . . . . Pages 31 - 33

UPPER HALVESUpper Halves Options & Upgrades. . . . . . . . . . . . . Pages 19 - 20Varmint Upper Halves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2124 Inch Tactical Upper Halves / SPR Upper Halves . . . . . . . . . Page 22Standard Rifle Upper Halves / OCMP Upper Halves . . . Pages 23 - 24C.A.R. Upper Halves . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 25 - 26Dissipator Upper Halves / XM177 Style Upper Halves . Pages 27 - 28EM-4 C.A.R. Upper Halves . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 29Commando/Pistol Upper Halves. . . . . . . . . . . . . . . . . . . . . . . . Page 30Ban Compliant Upper Halves . . . . . . . . . . . . . . Pages 34 - 36AR10 .308 Caliber Upper Halves. . . . . . . . . . . . . . . . Page 37

PARTS & ACCESSORIESBarrels and Barrel Assembly Parts . . . . . . . . . . . . . . . . . . Pages 38 - 42Front and Rear Sights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 43Upper Receivers and Parts . . . . . . . . . . . . . . . . . . . . . . . Pages 44 - 45Lower Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 46 - 47Buttstocks and Accessories . . . . . . . . . . . . . . . . . . . . . . . Pages 48 - 49Pistol Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 50Handguards and Rail System Accessories . . . . . . . . . . . . Pages 51 - 54Mounts, Slings, Mags, Bipods and other Accessories . . . . Pages 54 - 58Armorers Tools and Cleaning Products. . . . . . . . . . . . . . Pages 59 - 61Aimpoint and EOTech Weapon Sights . . . . . . . . . . . . . . . Pages 62 - 63DuraCoat® Firearm Finishes. . . . . . . . . . . . . . . . . . . . . . . Pages 64 - 69Gun Cases, Bayonets, Books and Manuals . . . . . . . . . . . . Pages 70 - 71

Page 4 MODEL "1" SALES Tel: 903-546-2087

7 1/2" Commando SBR 26 1/2" 23" 5 lbs. 3 ozs. 5 lbs. 7 ozs.

7 1/2" Pistol Pistol 23 1/2" 4 lbs. 14 ozs. 5 lbs. 2 ozs.

10 1/4" Commando SBR 29 1/4" 26" 5 lbs. 12 ozs. 6 lbs. 1 oz.

10 1/4" Pistol Pistol 26 1/2" 5 lbs. 7 ozs. 5 lbs. 12 ozs.

11 1/2" Commando SBR 30 1/2" 27 1/4" 5 lbs. 14 ozs. 6 lbs. 2 ozs.

11 1/2" Pistol Pistol 27 3/4" 5 lbs. 10 ozs. 5 lbs. 14 ozs.

14 1/2" EM-4 SBR 34 3/4" 31" 6 lbs. 1 oz. 6 lbs. 4 ozs.

14 1/2" EM-4 Pistol 30 3/4" 5 lbs. 9 ozs. 5 lbs. 14 ozs.

16" EM-4 Rifle 36 1/4" 32 1/2" 6 lbs. 3 ozs. 6 lbs. 7 ozs.

16" C.A.R. HB Rifle 35" 32" 6 lbs. 6 ozs. 6 lbs. 10 ozs.

16" C.A.R. Lightweight Rifle 35" 32" 5 lbs. 10 ozs. 5 lbs. 14 ozs.

16" XM177 Rifle 34 1/4" 31 1/4" 6 lbs. 3 ozs. 6 lbs. 7 ozs.

14 1/2" w/welded Phantom Rifle 35" 31 1/4" 6 lbs. 1 oz. 6 lbs. 4 ozs.

16" Varmint Rifle 34 1/2" 7 lbs. 14 ozs.

16" Varmint fluted Rifle 34 1/2" 7 lbs. 11 ozs.

16" Varmint threaded Rifle 35 3/4" 7 lbs. 13 ozs.

16" Varmint fluted threaded Rifle 35 3/4" 7 lbs. 10 ozs.

20" Varmint Rifle 38 1/2" 9 lbs. 5 ozs.

20" Varmint fluted Rifle 38 1/2" 8 lbs. 15 ozs.

20" Varmint threaded Rifle 39 3/4" 9 lbs. 3 ozs.

20" Varmint fluted threaded Rifle 39 3/4" 8 lbs. 14 ozs.

24" Varmint Rifle 42 1/2" 10 lbs. 0 ozs.

24" Varmint fluted Rifle 42 1/2" 9 lbs. 10 ozs.

24" Varmint threaded Rifle 43 3/4" 9 lbs. 14 ozs.

24" Varmint fluted threaded Rifle 43 3/4" 9 lbs. 9 ozs.

24" Tactical Rifle 42 1/2" 8 lbs. 14 ozs.

24" Tactical threaded Rifle 43 3/4" 8 lbs. 14 ozs.

20" Standard HB Rifle 39 3/4" 7 lbs. 14 ozs. 8 lbs. 2 ozs.

20" Standard HB fluted Rifle 39 3/4" 7 lbs. 11 ozs. 7 lbs. 15 ozs.

24" Standard HB Rifle 43 3/4" 8 lbs. 5 ozs. 8 lbs. 9 ozs.

24" Standard HB fluted Rifle 43 3/4" 8 lbs. 0 ozs. 8 lbs. 4 ozs.

Weights reflect completestandard configurationfirearm, unloaded andwithout magazine. L

EN

GT

HO

VE

RA

LL

FIR

EA

RM

TY

PE

WE

IGH

TC

ON

FIG

UR

ED

AS

A2

FIR

EA

RM

LE

NG

TH

WIT

HS

TO

CK

CL

OS

ED

WE

IGH

TC

ON

FIG

UR

ED

AS

A3

FIR

EA

RM

Fax: 903-546-6346 www.model1sales.com Page 5

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw 416R stainless steel extra heavy bull barrel

Mil-spec 1913 steel gas block and gas tube - Two piece free float aluminum tubeA3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating

Ejection port cover - Forward assist assembly - Charging handleComplete bolt and carrier assembly - Aluminum mag catch button and trigger guard

Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

VARMINT FLUTED STAINLESS5.56mm NATO/.223 Remington16” Varmint kit, Fluted Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . $61020” Varmint kit, Fluted Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . $61024” Varmint kit, Fluted Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . $61024” Varmint kit, Fluted Stainless Steel Barrel, 1-14 twist . . . . . . . . . . . . . . . . . . . . $650

VARMINT STAINLESS5.56mm NATO/.223 Remington16” Varmint kit, Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . $56020” Varmint kit, Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . $56024” Varmint kit, Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . $56024” Varmint kit, Stainless Steel Barrel, 1-14 twist . . . . . . . . . . . . . . . . . . . . . . . . . $600

Shown with optionalMagpul PRS Stock, ERGO Grip

and Versa-Pod Bipod.

Shown with optional M1S Low Profile Gas Block, Midwest IndustriesFree Float Rail, Midwest Flip Front and Rear Sights and Magpul PRS Stock.

6mm PPC Caliber VARMINT STAINLESS24” Varmint kit, Stainless Steel Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . $61524” Varmint kit, Fluted Stainless Steel Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . $665

.204 Ruger Caliber VARMINT STAINLESS24” Varmint kit, Stainless Steel Barrel, 1-12 twist . . . . . . . . . . . . . . . . . . . . . . . . . $63524” Varmint kit, Fluted Stainless Steel Barrel, 1-12 twist . . . . . . . . . . . . . . . . . . . . $685

NEW! .22LR Caliber VARMINT FLUTED STAINLESS20” Varmint kit, Fluted Stainless Steel Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . $655

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

Page 6 MODEL "1" SALES Tel: 903-546-2087

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw black manganese phosphate finish chrome moly extra heavy bull barrel

Mil-spec 1913 steel gas block and gas tube - Two piece free float aluminum tube

A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating

Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum mag catch button and trigger guard

Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

VARMINT CHROME MOLY5.56mm NATO/.223 Remington16” Varmint kit, Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . $56020” Varmint kit, Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . $56024” Varmint kit, Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . $560

VARMINT FLUTED CHROME MOLY5.56mm NATO/.223 Remington16” Varmint kit, Fluted Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . $61020” Varmint kit, Fluted Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . $61024” Varmint kit, Fluted Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . $610

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

24" TACTICAL RIFLE5.56mm NATO 1-9 twist, Chrome Lined Chamber & Bore. . . . . . . . . . . . $6456.8mm Rem SPC 1-9.5 twist, Chrome Lined Chamber & Bore. . . . . . . . $710NEW! 6.5 Sporter 1-9 twist, Chrome Lined Chamber & Bore. . . . . . . . $710

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw 24" fluted manganese phosphate finish chrome moly tactical extra heavy barrel

Mil-spec 1913 steel gas block and gas tube - Two piece free float aluminum tube

A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating

Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum mag catch button and trigger guard

Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

Shown with optionalYHM 4 Rail Handguard.

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

Fax: 903-546-6346 www.model1sales.com Page 7

18 1/2" 5.56mm SPR A2 or A3With Chrome Lined Chamber and Bore5.56mm NATO Chrome Moly Heavy Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . $570STAINLESS STEEL5.56mm NATO/.223 Rem Stainless Steel Heavy Barrel, 1-7 twist . . . . . . . . . . . $620

18" 6.8 REM SPC SPR A2 or A36.8 Rem SPC Stainless Steel Heavy Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . $680

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw manganese phosphate finish chrome moly or polished stainless steel heavy barrel

A2 Flashider - Forged front sight base or Mil-spec 1913 steel gas block - Gas tube

A2 handguard with heat shield - Ejection port cover - Forward assist assembly - Charging handle

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by law

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVER

WITH MID-LENGTH GAS SYSTEME.R. Shaw polished stainless steel heavy barrel - 5/8 x 24 thread - A2 Flashider

Standard length free float aluminum tube - Forged front sight base or Mil-spec steel gas block

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Gas tube - Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Mag catch button and trigger guard

Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by law

Shown with optional M1S Low Profile Gas Blockand YHM Smooth Free Float Handguard.

Shown with optional YHM Rail Gas Blockand YHM Smooth Free Float Handguard.

Shown with optional Midwest Industries Free Float Rail,LMT SOPMOD Stock, ERGO Grip and Harris Bipod.

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

Page 8 MODEL "1" SALES Tel: 903-546-2087

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERNational Match forged front sight base - OCMP free float handguard

A2 T7075 forged hardcoat anodized upper with mil-spec Teflon coating - National Match front & rear sightA2 Flashider - Gas tube - Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guardLower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by law

20" STANDARD A2 or A35.56/.223 Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $485

For Chrome Lined Chamber and Bore add $355.56mm Chrome Lined Government Profile Barrel, 1-7 twist . . . . . . . . . . . . . . . $535

20" STANDARD A2 or A35.56mm NATO/.223 RemingtonStainless Steel Barrel 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $535Fluted Stainless Steel Barrel 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . .$585

20" OCMP A25.56mm NATO/.223 RemingtonE.R. Shaw Chrome Moly Heavy Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . $625E.R. Shaw Stainless Steel Heavy Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . $675Krieger .223 Stainless Steel Barrel 1-7.7 twist . . . . . . . . . . . . . . . . . . $920

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw manganese phosphate finish chrome moly or polished stainless steel heavy barrelA2 Flashider - Forged front sight base - Round A2 handguard with heat shield - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guardLower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by law

Shown with optionalTriangle Handguard and M4 CAR Stock.

Fax: 903-546-6346 www.model1sales.com Page 9

6.8mm Remington SPC20" STANDARD A2 or A3Chrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $575

For Chrome Lined Chamber and Bore add $35

7.62x39mm Caliber 20" STANDARD A2 or A3Chrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $535

NEW! 5.45x39mm Caliber 20" STANDARD A2 or A3Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $575

NEW! 6.5mm Sporter 20" STANDARD A2 or A3Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $575

NEW! .22LR Caliber 20" STANDARD A2 or A3Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $580Fluted Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $630Stainless Steel Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $630Fluted Stainless Steel Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $680

24" STANDARD A2 or A35.56mm NATO/.223 RemingtonChrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $485Stainless Steel Barrel 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . $535

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw manganese phosphate finish chrome moly or polished stainless steel heavy barrelA2 Flashider - Forged front sight base - Round A2 handguard with heat shield - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guardLower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by law

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

Shown with Fluted Stainless Steel Barrel andoptional Viking Tactics Modular Handguard and M4 CAR Stock.

Page 10 MODEL "1" SALES Tel: 903-546-2087

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw 16" manganese phosphate finish chrome moly or polished stainless steel heavy barrelA2 Flashider - Forged front sight base - C.A.R. handguard with heat shield - 4 position C.A.R. stockA2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Gas tube - Ejection port cover - Forward assist assembly - Charging handleComplete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - Upper half fully assembled, gauged and headspacedSpecify AR15 or M16 - No FFL required - Void where prohibited by law

16" C.A.R. A2 or A35.56mm NATO/.223 RemingtonChrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $485

For Chrome Lined Chamber and Bore add $35

STAINLESS STEEL

16" C.A.R. A2 or A35.56mm NATO/.223 RemingtonStainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $535Fluted Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . $585

LIGHTWEIGHT BARREL16" C.A.R. A2 or A35.56mm NATO/.223 RemingtonLightweight Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $485

For Chrome Lined Chamber and Bore add $35

NEW! .22LR Caliber 16" C.A.R. A2 or A3Lightweight Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $560

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

Shown with optional Midwest IndustriesTwo Piece Rail and M4 CAR Stock.

Shown with optional Mil-spec 1913 Steel Gas Block,YHM Free Float Rail and M4 CAR Stock.

Fax: 903-546-6346 www.model1sales.com Page 11

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVER

Specify AR15 or M16 - No FFL required - Void where prohibited by law

6.8mm Rem SPC 16" C.A.R. A2 or A3Chrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $575

For Chrome Lined Chamber and Bore add $35

.300 Fireball Caliber 16" C.A.R. A2 or A3Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $535

7.62x39mm Caliber 16" C.A.R. A2 or A3Chrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $535

NEW! 5.45x39mm Caliber 16" C.A.R. A2 or A3Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $575

NEW! 6.5mm Sporter 16" C.A.R. A2 or A3Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $575

NEW! .22LR Caliber 16" C.A.R. A2 or A3Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $560

9mm Caliber 16" C.A.R. A2 or A3Chrome Moly Barrel, 1-15 twist . . . . . . . . . . . . . . . . . . $710

LIGHTWEIGHT BARREL9mm Caliber 16" C.A.R. A2 or A3

Lightweight Chrome Moly Barrel, 1-15 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $710

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

Shown with optional M1S Low Profile Gas Block,Viking Tactics Modular Handguard and M4 CAR Stock.

Shown with optional Midwest IndustriesTwo Piece Rail and ACE .22LR Folding Stock.

Page 12 MODEL "1" SALES Tel: 903-546-2087

16" DISSIPATOR A2 or A35.56mm NATO/.223 RemingtonChrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $535

For Chrome Lined Chamber and Bore add $35

STAINLESS STEEL

16" DISSIPATOR A2 or A35.56mm NATO/.223 RemingtonStainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $585

16" BARREL WITH FULL LENGTH A2 HANDGUARDS & RIFLE SIGHTING RADIUS,SPECIAL GAS BLOCK DESIGN ASSURES PROPER GAS SYSTEM OPERATION

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVER

E.R. Shaw manganese phosphate finish chrome moly or polished stainless steel heavy barrel

A2 Flashider - Forged front sight base - Round A2 handguard with heat shield - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by law

6.8mm Rem SPC 16" DISSIPATOR A2 or A3Chrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $610

7.62x39mm Caliber 16" DISSIPATOR A2 or A3Chrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $600

NEW! 5.45x39mm Caliber 16" DISSIPATOR A2 or A3Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $610

Shown with optional YHM Four Rail Gas Block,YHM FreeFloat Rail,YHM Flip Front & Rear Sights and M4 CAR Stock.

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

Fax: 903-546-6346 www.model1sales.com Page 13

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVER

E.R. Shaw 11 1/2" manganese phosphate finish chrome moly barrel with welded 5 1/2" flashider

Forged front sight base - C.A.R. handguard with heat shield - 4 position C.A.R. stock

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Gas tube - Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by law

XM177 STYLE C.A.R. A2 or A35.56mm NATO/.223 RemingtonChrome Moly Barrel, 1-9 twist, Hole Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . . $520Chrome Moly Barrel, 1-9 twist, Slot Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . . . $520Chrome Moly Barrel, 1-9 twist, Full Slot Flashider . . . . . . . . . . . . . . . . . . . . . . . . $535

Shown with optional6-Position M-4 stock.

Shown with optionalTriangle Handguard and 6-Position M-4 stock.

Shown with optionalLE Tactical Stock.

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

NEW! .22LR CaliberXM177 STYLE C.A.R. A2 or A3Chrome Moly Barrel, 1-16 twist, Hole Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . $595Chrome Moly Barrel, 1-16 twist, Slot Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . . $595Chrome Moly Barrel, 1-16 twist, Full Slot Flashider . . . . . . . . . . . . . . . . . . . . . . . $610

Page 14 MODEL "1" SALES Tel: 903-546-2087

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw manganese phosphate finish EM-4 chrome moly barrel - A2 Flashider

Forged Front Sight Base - Gas tube - M-4 handguard with heat shield - Six position M-4 stockA2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Charging handleComplete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by law

EM-4 C.A.R. A2 or A35.56mm NATO/.223 Remington16" EM-4 Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $53516" (14 1/2” Barrel with welded Phantom Flashider) EM-4 Chrome Moly, 1-9 twist $56514 1/2" EM-4 Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . $535

The 14 1/2" EM-4 kit is for full auto or registered short barrel rifles – NFA RULES APPLYFor Chrome Lined Chamber and Bore add $35 (Not available with welded Phantom flashider)

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

6.8mm Rem SPC EM-4 C.A.R. A2 or A316" EM-4 Chrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61014 1/2" EM-4 Chrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . $610

The 14 1/2" EM-4 kit is for full auto or registered short barrel rifles – NFA RULES APPLYFor Chrome Lined Chamber and Bore add $35

NEW! 5.45x39mm Caliber EM-4 C.A.R. A2 or A316" EM-4 Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $610

NEW! .22LR Caliber EM-4 C.A.R. A2 or A316" EM-4 Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61014 1/2" EM-4 Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . $610

The 14 1/2" EM-4 kit is for full auto or registered short barrel rifles – NFA RULES APPLY

14 1/2” EM-4 shown with optionalGas Block and YHM Two Piece Rail Handguard.

Shown with optionalYHM Smooth Free Float

Handguard and ErgonomicForward Grip.

Fax: 903-546-6346 www.model1sales.com Page 15

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw manganese phosphate finish chrome moly barrel - A2 Flashider

Forged Front Sight Base - Gas tube - C.A.R. handguard with heat shield - 4 position C.A.R. stockA2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Charging handleComplete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set with sear pin - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by lawCommando Kits are for full auto or registered short barrel rifles only - NFA rules apply

M-16 COMMANDO A2 or A35.56mm NATO/.223 Remington10 1/4" Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49511 1/2" Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $495

For Chrome Lined Chamber and Bore add $35

7.62x39mm CaliberM-16 COMMANDO A2 or A311 1/2" Chrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $545

NEW! 5.45x39mm Caliber M-16 COMMANDO A2 or A311 1/2" Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $575

NEW! .22LR Caliber M-16 COMMANDO A2 or A311 1/2" Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $560

9mm Caliber CaliberM-16 COMMANDO A2 or A3

10 1/4" Chrome Moly Barrel, 1-15 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $71011 1/2" Chrome Moly Barrel, 1-15 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $710

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

Shown with optional M1S Low Profile Gas Block,YHM Free Float Rail and 6-Position M-4 stock.

Page 16 MODEL "1" SALES Tel: 903-546-2087

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw manganese phosphate finish chrome moly barrel - Forged front sight base or gas blockA2 Flashider - Gas tube - C.A.R. handguard w/heat shield - 7 1/2" kits come with free float tube onlyA2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Charging handle - Pistol recoil buffer assemblyComplete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by lawPistol Kits are for pistol lowers or full auto only - All NFA rules apply

NEW! .22LR Caliber PISTOL A2 or A3With .22LR Pistol Receiver Endcap7 1/2" Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . $58011 1/2" Chrome Moly Barrel, 1-5 twist . . . . . . . . . . . . . . . . . . . . . . . . . $570

PISTOL A2 or A35.56mm NATO/.223 Remington7 1/2" Chrome Moly Barrel, 1-9 twist, Free Float Tube . . . . . . . . . . . . . . . . . . . . . $52010 1/4" or 11 1/2" Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . $510

For Chrome Lined Chamber and Bore add $35

7.62x39mm Caliber PISTOL A2 or A311 1/2" Chrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$535

9mm CaliberPISTOL A2 or A3

7 1/2" Chrome Moly Barrel, 1-15 twist, Free Float Tube . . . . . . . . . . . . . . . . . . . . $72010 1/4" or 11 1/2" Chrome Moly Barrel, 1-15 twist . . . . . . . . . . . . . . . . . . . . . . . $710

SEE PGS 17 & 18 FOROPTIONS & UPGRADES

Shown with optionalYoung Vented Rail Handguard.

Shown with optional M1S Low ProfileGas Block and YHM Free Float Rail.

Shown with optionalMidwest Industries

Free Float Rail.

Fax: 903-546-6346 www.model1sales.com Page 17

Add Threaded Muzzle 1/2 x 28, 1/2 x 36 $50 Inc Inc Inc Inc Inc Inc Inc IncAdd Threaded Muzzle Custom $75 $125 N/A $125 $125 N/A $125 $125 $125Add Versa-Pod Bipod $55 $55 $55 $55 $55 $55 $55 $55 $55Add Versa-Pod Bipod w/Rail Adapter $85 $85 $85 $85 $85 $85 $85 $85 $85Add Harris Swivel Model Bipod $85 $85 $85 $85 $85 $85 $85 $85 $85Add Harris Swivel Bipod with Rail Adapter $105 $105 $105 $105 $105 $105 $105 $105 $105Add Swivel Stud on Aluminum FF $10 $10 $10 $10 $10 $10 $10 $10 $10Add Swivel Stud on Std Plastic Handguard N/A N/A $12 $12 $12 $12 $12 $12 N/AAdd Swivel Stud on 4 Rail $35 $35 $35 $35 $35 $35 $35 $35 $35Add Removable Carry Handle, STD or NM, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75Add YHM Removable Rear Sight, A3 $45 $45 $45 $45 $45 $45 $45 $45 $45Add M1S B.U.I.S. Removable Rear Sight, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75Add 4 Aperture Removable Rear Sight, A3 $65 $65 $65 $65 $65 $65 $65 $65 $65Add YHM Flip Rear Sight, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75Add MI Flip Rear Sight, A3 $85 $85 $85 $85 $85 $85 $85 $85 $85Add MI Low Pro Flip Rear Sight, A3 $85 $85 $85 $85 $85 $85 $85 $85 $85Add GG&G Flip Rear Sight, A3 $100 $100 $100 $100 $100 $100 $100 $100 $100Add GG&G Spring Actuated Flip Rear Sight, A3 $135 $135 $135 $135 $135 $135 $135 $135 $135Add GG&G MAD Flip Rear Sight, A3 $115 $115 $115 $115 $115 $115 $115 $115 $115Add PRi Flip Rear Sight, A3 $120 $120 $120 $120 $120 $120 $120 $120 $120Add Removable Front Sight, Gas Block mount $45 $45 $45 $45 $45 $45 $45 $45 $45Add YHM Flip Front Sight, Gas Block mount $65 $65 $65 $65 $65 $65 $65 $65 $65Add YHM Flip Front Sight, Forearm mount $65 $65 $65 $65 $65 $65 $65 $65 $65Add MI Flip Front Sight, Gas Block mount $75 $75 $75 $75 $75 $75 $75 $75 $75Add MI Flip Front Sight, Forearm mount $75 $75 $75 $75 $75 $75 $75 $75 $75Add GG&G Flip Front Sight, Gas Block mount $120 $120 $120 $120 $120 $120 $120 $120 $120Add GG&G Spring Flip Front Sight, GB mount $140 $140 $140 $140 $140 $140 $140 $140 $140Add GG&G Spring Flip Frnt Sght, Forearm mnt $140 $140 $140 $140 $140 $140 $140 $140 $140Substitute YHM Flip Front Sight Gas Block, A3 N/A $75 $75 $75 $75 $75 $75 $75 $75Substitute MI Flip Front Sight Gas Block, A3 N/A $140 $140 $140 $140 $140 $140 $140 $140Substitute GG&G Flip Front Sight Gas Block, A3 N/A $159 $159 $159 $159 $159 $159 $159 $159Substitute PRi Flip Front Sight Gas Block, A3 N/A $164 $164 $164 $164 $164 $164 $164 $164Substitute Young Flip Front Sight Gas Block, A3 N/A $115 $115 $115 $115 $115 $115 $115 $115Substitute Steel Gas Block Sight Base, A3 Inc Inc N/C N/C N/C N/C N/C N/C N/CSubstitute Low Pro Gas Block, A3 $25 $25 $25 $25 $25 $25 $25 $25 $25Substitute Two Rail Gas Block, A3 N/A $35 $35 $35 $35 $35 $35 $35 $35Substitute Four Rail Gas Block, A3 N/A $38 $38 $38 $38 $38 $38 $38 $38Substitute NM Rear Sight, A2 N/A $35 $35 $35 $35 $35 $35 $35 $35Substitute NM Front Sight Base N/A $25 $25 $25 $25 $25 $25 $25 $25Substitute NM Front Sight N/A $8 $8 $8 $8 $8 $8 $8 $8Sub KNS Front Sight, Square, .034/.052/.072 N/A $6 $6 $6 $6 $6 $6 $6 $6Sub KNS Front Sight, Round, .034/.052/.072 N/A $6 $6 $6 $6 $6 $6 $6 $6Sub KNS Front Sight, V-Notch N/A $6 $6 $6 $6 $6 $6 $6 $6Sub KNS Hooded Body Front Sight, Std/Duplex N/A $28 $28 $28 $28 $28 $28 $28 $28Sub KNS Standard Body Front Sight, Std/Duplx N/A $28 $28 $28 $28 $28 $28 $28 $28Substitute KNS Tactical Front Sight N/A $41 $41 $41 $41 $41 $41 $41 $41Substitute Jard Single Stage Trigger $127 $127 $127 $127 $127 $127 $127 $127 $127Substitute Jewell Trigger Assembly $191 $191 $191 $191 $191 $191 $191 $191 $191Substitute Rock River Two Stage Trigger $105 $105 $105 $105 $105 $105 $105 $105 $105Substitute Timney Drop In Trigger, Standard $174 $174 $174 $174 $174 $174 $174 $174 $174Substitute Timney Drop In Trigger, Skeletonized $239 $239 $239 $239 $239 $239 $239 $239 $239

Complete Kits• N/C = No Charge• N/A = Not Available• Inc = Included 6.8

SPR

KITS

DISS

IPATO

R KI

TS

VARM

INT/

TACT

ICAL

KIT

S

C.A.

R.KI

TS

EM-4

C.A.

R.KI

TS

7.5" P

ISTOL

KIT

S

STAN

DARD

/18.5"

SPR

KITS

XM17

7 STY

LE K

ITS

COMM

ANDO

KIT

S

Complete Kits• N/C = No Charge• N/A = Not Available• Inc = Included

Page 18 MODEL "1" SALES Tel: 903-546-2087

Substitute Stippled Hard Plastic Grip $15 $15 $15 $15 $15 $15 $15 $15 $15Substitute PSG1 Style Plastic Grip $25 $25 $25 $25 $25 $25 $25 $25 $25Substitute ERGO SG Grip, RH, LH or Ambi $20 $20 $20 $20 $20 $20 $20 $20 $20Substitute ERGO Rigid Grip, RH, LH or Ambi $17 $17 $17 $17 $17 $17 $17 $17 $17Substitute ERGO Tactical Standard Grip $35 $35 $35 $35 $35 $35 $35 $35 $35Substitute ERGO Tactical Deluxe Grip $45 $45 $45 $45 $45 $45 $45 $45 $45Substitute Sierra Precision Grip $25 $25 $25 $25 $25 $25 $25 $25 $25Substitute Magpul MIAD $34 $34 $34 $34 $34 $34 $34 $34 $34Substitute Green Furniture $20 $20 $20 $20 $20 $20 $20 $20 $20Substitute Triangle Handguard N/A $25 $25 $25 $30 $30 $30 $30 N/ASubstitute M4 Handguard N/A N/A N/A N/A $10 $10 INC $10 N/ASubstitute OCMP Free Float Handguard N/A N/A N/A $100 N/A N/A N/A N/A N/ASubstitute Aluminum Free Float, Knurled Inc Inc $25 $25 $25 N/A $25 $25 IncSubstitute Aluminum Free Float, Fluted $10 $10 $35 $35 $35 N/A $35 $35 $10Substitute Alum Free Float, Fluted & Knurled $10 $10 $35 $35 $35 N/A $35 $35 $10Substitute Aluminum Free Float, Vented N/A N/A N/A N/A $40 N/A $40 $40 $15Substitute YHM 2 Piece 4 Rail Handguard N/A N/A $170 $170 $127 $127 $127 $127 N/ASubstitute YHM Free Float 4 Rail Handguard $140 $140 $140 $140 $100 $100 $100 $100 $85Add YHM Free Float 4 Rail Handguard End Cap $16 $16 $16 $16 $16 $16 $16 $16 $16Substitute YHM Smooth Free Float $140 $140 $140 $140 $120 $120 $120 $120 N/ASubstitute MI 2 Piece 4 Rail Handguard N/A $179 $179 $179 $135 $135 $135 $135 N/ASubstitute MI 2 Pc Free Float 4 Rail Handguard $230 $230 $230 $230 $160 $160 $160 $160 $140Substitute MI 2 Pc Extended 4 Rail Handguard N/A N/A N/A N/A $155 $155 $155 $155 N/ASubstitute MI 2 Pc FF Extended 4 Rail Hndgrd N/A N/A N/A N/A $200 $200 $200 $200 N/ASubstitute Predator Free Float N/A $240 $240 $240 $210 N/A $210 $210 N/ASubstitute Viking Tactics Modular Handguard N/A $139 $139 $139 $139 N/A $139 $139 N/ASubstitute GG&G Free Float 4 Rail Handguard N/A N/A N/A N/A $200 N/A $200 $200 N/ASubstitute ArmaLite 2 Piece 4 Rail Handguard N/A N/A N/A N/A $125 $125 $125 $125 N/ASubstitute Young Vented FF 4 Rail Handguard $155 $155 $155 $155 $125 N/A $125 $125 $75Substitute Slim Line 2 Piece 4 Rail Handguard N/A N/A N/A N/A $125 $125 $125 $125 N/ASubstitute LE Buttstock N/C N/C N/C N/C N/C N/C N/C N/C N/ASubstitute A2 Buttstock Inc Inc Inc Inc N/C N/C N/C N/C N/ASubstitute 4 Position CAR Stock N/C N/C N/C N/C Inc Inc N/C Inc N/ASubstitute 6 Position M-4 Stock $25 $25 $25 $25 $25 $25 INC $25 N/ASubstitute ACE M4 SOCOM Stock, Short $145 $145 $145 $145 $145 $145 $145 $145 N/ASubstitute ACE M4 SOCOM Stock, Long $170 $170 $170 $170 $170 $170 $170 $170 N/ASubstitute ACE Skeletonized Stock $50 $50 $50 $50 $50 $50 $50 $50 N/ASubstitute ACE ARFX Skeleton Stock $50 $50 $50 $50 $50 $50 $50 $50 N/ASubstitute ACE ARFXE Skeleton Entry Stock $75 $75 $75 $75 $75 $75 $75 $75 N/ASubstitute LMT SOPMOD Stock $210 $210 $210 $210 $210 $210 $210 $210 N/ASubstitute MagPul PRS Adjustable Stock $210 $210 $210 $210 $210 $210 $210 $210 N/ASubstitute MagPul URB Stock $215 $215 $215 $215 $215 $215 $215 $215 N/ASubstitute Chrome Carrier, Complete $65 N/A $65 $65 $65 $65 $65 $65 $65Sub Chrome Carrier w/Black Bolt, Complete $60 $60 $60 $60 $60 $60 $60 $60 $60Substitute Young NM Chrome Bolt & Carrier $100 $100 $100 $100 $100 $100 $100 $100 $100Substitute Extended Latch Charging Handle $3 $3 $3 $3 $3 $3 $3 $3 $3Substitute Wook Ambi Ext Latch Charging Hndl $6 $6 $6 $6 $6 $6 $6 $6 $6Substitute Tactical Latch Charging Handle $9 $9 $9 $9 $9 $9 $9 $9 $9Substitute Badger Ext Latch Charging Handle $14 $14 $14 $14 $14 $14 $14 $14 $14

• Chrome Bolt and Carrier available in 5.56/.223 only• Chrome Carrier with Black Bolt available in all calibers except 9mm and .22LR

6.8 SP

R KI

TS

DISS

IPATO

R KI

TS

VARM

INT/

TACT

ICAL

KIT

S

C.A.

R.KI

TS

EM-4

C.A.

R.KI

TS

7.5" P

ISTOL

KIT

S

STAN

DARD

/18.5"

SPR

KITS

XM17

7 STY

LE K

ITS

COMM

ANDO

KIT

S

Upper Halves• N/C = No Charge• N/A = Not Available• Inc = Included

Fax: 903-546-6346 www.model1sales.com Page 19

Add Threaded Muzzle 1/2 x 28, 1/2 x 36 $50 Inc Inc Inc Inc Inc Inc Inc IncAdd Threaded Muzzle Custom $75 $125 N/A $125 $125 N/A $125 $125 $125Add 5.56/.223 Bolt Carrier Group

and Charging Handle $120 N/A $120 $120 $120 $120 $120 $120 $120Add 5.56/.223 Bolt Carrier Group & Charging Handle

with Chrome Bolt and Carrier $185 N/A $185 $185 $185 $185 $185 $185 $185Add 5.56/.223 Bolt Carrier Group & Charging Handle,

Chrome Carrier with Black Bolt $180 N/A $180 $180 $180 $180 $180 $180 $180Add 5.56/.223 NM Bolt Carrier Group & Charging Handle

with Young NM Chrome Bolt and Carrier $220 N/A $220 $220 $220 $220 $220 $220 $220Add 6.8mm Rem SPC Bolt Carrier Group

and Charging Handle N/A $140 $140 $140 $140 N/A $140 N/A N/AAdd 6.8mm Rem SPC Bolt Carrier Group & Charging Handle,

Chrome Carrier with Black Bolt N/A $205 $205 $205 $205 N/A $205 N/A N/AAdd 9mm Bolt Carrier Group and

Charging Handle N/A N/A N/A N/A $140 N/A N/A $140 $140Add 7.62x39mm Bolt Carrier Group

and Charging Handle N/A N/A $140 $140 $140 N/A $140 $140 N/AAdd 7.62x39mm Bolt Carrier Group & Charging Handle,

Chrome Carrier with Black Bolt N/A N/A $205 $205 $205 N/A $205 $205 N/AAdd 5.45x39mm Bolt Carrier Group

and Charging Handle N/A N/A $140 $140 $140 N/A $140 N/A N/AAdd 5.45x39mm Bolt Carrier Group & Charging Handle,

Chrome Carrier with Black Bolt N/A N/A $205 $205 $205 N/A $205 N/A N/AAdd 6.5 Sporter Bolt Carrier Group

and Charging Handle N/A N/A N/A $140 $140 N/A N/A N/A N/AAdd .22LR Bolt Carrier Group

and Charging Handle Inc N/A N/A Inc Inc Inc. Inc Inc IncAdd Standard Charging Handle $16 $16 $16 $16 $16 $16 $16 $16 $16Add Extended Latch Charging Handle $19 $19 $19 $19 $19 $19 $19 $19 $19Add Wook Ambi Ext. Latch Charging Hndl $22 $22 $22 $22 $22 $22 $22 $22 $22Add Tactical Latch Charging Handle $25 $25 $25 $25 $25 $25 $25 $25 $25Add Badger Ext. Latch Charging Handle $30 $30 $30 $30 $30 $30 $30 $30 $30Add Versa-Pod Bipod $55 $55 $55 $55 $55 $55 $55 $55 $55Add Versa-Pod Bipod w/Rail Adapter $85 $85 $85 $85 $85 $85 $85 $85 $85Add Harris Swivel Model Bipod $85 $85 $85 $85 $85 $85 $85 $85 $85Add Harris Swivel Bipod with Rail Adapter $105 $105 $105 $105 $105 $105 $105 $105 $105Add Swivel Stud on Aluminum FF $10 $10 $10 $10 $10 $10 $10 $10 $10Add Swivel Stud on Std Plastic Handguard N/A N/A $12 $12 $12 $12 $12 $12 N/AAdd Swivel Stud on 4 Rail $35 $35 $35 $35 $35 $35 $35 $35 $35Add Removable Carry Handle, STD or NM, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75Add YHM Removable Rear Sight, A3 $45 $45 $45 $45 $45 $45 $45 $45 $45Add M1S B.U.I.S. Removable Rear Sight, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75Add 4 Aperture Removable Rear Sight, A3 $65 $65 $65 $65 $65 $65 $65 $65 $65Add YHM Flip Rear Sight, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75Add MI Flip Rear Sight, A3 $85 $85 $85 $85 $85 $85 $85 $85 $85Add MI Low Prof Flip Rear Sight, A3 $85 $85 $85 $85 $85 $85 $85 $85 $85Add GG&G Flip Rear Sight, A3 $100 $100 $100 $100 $100 $100 $100 $100 $100Add GG&G Spring Actuated Flip Rear Sight, A3 $135 $135 $135 $135 $135 $135 $135 $135 $135Add GG&G MAD Flip Rear Sight, A3 $115 $115 $115 $115 $115 $115 $115 $115 $115Add PRi Flip Rear Sight, A3 $120 $120 $120 $120 $120 $120 $120 $120 $120

6.8 SP

R UP

PER

HALV

ES

DISS

IPATO

R UP

PER

HALV

ES

VARM

INT/

TACT

ICAL

UPP

ER H

ALVE

S

C.A.

R.UP

PER

HALV

ES

EM-4

C.A.

R.UP

PER

HALV

ES

7.5" P

ISTOL

UPP

ER H

ALVE

S

STAN

DARD

/18.5"

SPR

UPPE

R HA

LVES

XM17

7 STY

LE U

PPER

HAL

VES

COMM

ANDO

UPP

ER H

ALVE

S

Page 20 MODEL "1" SALES Tel: 903-546-2087

Upper Halves• N/C = No Charge• N/A = Not Available• Inc = Included

Add Removable Front Sight, Gas Block mount $45 $45 $45 $45 $45 $45 $45 $45 $45Add YHM Flip Front Sight, Gas Block mount $65 $65 $65 $65 $65 $65 $65 $65 $65Add YHM Flip Front Sight, Forearm mount $65 $65 $65 $65 $65 $65 $65 $65 $65Add MI Flip Front Sight, Gas Block mount $75 $75 $75 $75 $75 $75 $75 $75 $75Add MI Flip Front Sight, Forearm mount $75 $75 $75 $75 $75 $75 $75 $75 $75Add GG&G Flip Front Sight, Gas Block mount $120 $120 $120 $120 $120 $120 $120 $120 $120Add GG&G Spring Flip Front Sight, GB mount $140 $140 $140 $140 $140 $140 $140 $140 $140Add GG&G Spring Flip Frnt Sght, Forearm Mnt $140 $140 $140 $140 $140 $140 $140 $140 $140Substitute YHM Flip Front Sight Gas Block, A3 N/A $75 $75 $75 $75 $75 $75 $75 $75Substitute MI Flip Front Sight Gas Block, A3 N/A $140 $140 $140 $140 $140 $140 $140 $140Substitute GG&G Flip Front Sight Gas Block, A3 N/A $159 $159 $159 $159 $159 $159 $159 $159Substitute PRi Flip Front Sight Gas Block, A3 N/A $164 $164 $164 $164 $164 $164 $164 $164Substitute Young Flip Front Sight Gas Block, A3 N/A $115 $115 $115 $115 $115 $115 $115 $115Substitute Steel Gas Block Sight Base, A3 Inc Inc N/C N/C N/C N/C N/C N/C N/CSubstitute Low Pro Gas Block, A3 $25 $25 $25 $25 $25 $25 $25 $25 $25Substitute Two Rail Gas Block, A3 N/A $35 $35 $35 $35 $35 $35 $35 $35Substitute Four Rail Gas Block, A3 N/A $38 $38 $38 $38 $38 $38 $38 $38Substitute NM Rear Sight, A2 N/A $35 $35 $35 $35 $35 $35 $35 $35Substitute NM Front Sight Base N/A $25 $25 $25 $25 $25 $25 $25 $25Substitute NM Front Sight N/A $8 $8 $8 $8 $8 $8 $8 $8Sub KNS Front Sight, Square, .034/.052/.072 N/A $6 $6 $6 $6 $6 $6 $6 $6Sub KNS Front Sight, Round, .034/.052/.072 N/A $6 $6 $6 $6 $6 $6 $6 $6Sub KNS Front Sight, V-Notch N/A $6 $6 $6 $6 $6 $6 $6 $6Sub KNS Hooded Body Front Sight, Std/Duplex N/A $28 $28 $28 $28 $28 $28 $28 $28Sub KNS Standard Body Front Sight, Std/Duplx N/A $28 $28 $28 $28 $28 $28 $28 $28Substitute KNS Tactical Front Sight N/A $41 $41 $41 $41 $41 $41 $41 $41Substitute Green Handguard N/A N/A $10 $10 $10 $10 $10 $10 N/ASubstitute Triangle Handguard N/A $25 $25 $25 $30 $30 $30 $30 N/ASubstitute M4 Handguard N/A N/A N/A N/A $10 $10 INC $10 N/ASubstitute OCMP Free Float Handguard N/A N/A N/A $100 N/A N/A N/A N/A N/ASubstitute Aluminum Free Float, Knurled Inc Inc $25 $25 $25 N/A $25 $25 IncSubstitute Aluminum Free Float, Fluted $10 $10 $35 $35 $35 N/A $35 $35 $10Substitute Alum Free Float, Fluted & Knurled $10 $10 $35 $35 $35 N/A $35 $35 $10Substitute Aluminum Free Float, Vented N/A N/A N/A N/A $40 N/A $40 $40 $15Substitute YHM 2 Piece 4 Rail Handguard N/A N/A $170 $170 $127 $127 $127 $127 N/ASubstitute YHM Free Float 4 Rail Handguard $140 $140 $140 $140 $100 $100 $100 $100 $85Add YHM Free Float 4 Rail Handguard End Cap $16 $16 $16 $16 $16 $16 $16 $16 $16Substitute YHM Smooth Free Float $140 $140 $140 $140 $120 $120 $120 $120 N/ASubstitute MI 2 Piece 4 Rail Handguard N/A $179 $179 $179 $135 $135 $135 $135 N/ASubstitute MI 2 Pc Free Float 4 Rail Handguard $230 $230 $230 $230 $160 $160 $160 $160 $140Substitute MI 2 Pc Extended 4 Rail Handguard N/A N/A N/A N/A $155 $155 $155 $155 N/ASubstitute MI 2 Pc FF Extended 4 Rail Hndgrd N/A N/A N/A N/A $200 $200 $200 $200 N/ASubstitute Predator Free Float N/A $240 $240 $240 $210 N/A $210 $210 N/ASubstitute Viking Tactics Modular Handguard N/A $139 $139 $139 $139 N/A $139 $139 N/ASubstitute GG&G Free Float 4 Rail Handguard N/A N/A N/A N/A $200 N/A $200 $200 N/ASubstitute ArmaLite 2 Piece 4 Rail Handguard N/A N/A N/A N/A $125 $125 $125 $125 N/ASubstitute Young Vented FF 4 Rail Handguard $155 $155 $155 $155 $125 N/A $125 $125 $75Substitute Slim Line 2 Piece 4 Rail Handguard N/A N/A N/A N/A $125 $125 $125 $125 N/A

6.8 SP

R UP

PER

HALV

ES

DISS

IPATO

R UP

PER

HALV

ES

VARM

INT/

TACT

ICAL

UPP

ER H

ALVE

S

C.A.

R.UP

PER

HALV

ES

EM-4

C.A.

R.UP

PER

HALV

ES

7.5" P

ISTOL

UPP

ER H

ALVE

S

STAN

DARD

/18.5"

SPR

UPPE

R HA

LVES

XM17

7 STY

LE U

PPER

HAL

VES

COMM

ANDO

UPP

ER H

ALVE

S

Fax: 903-546-6346 www.model1sales.com Page 21

Complete barrel assembly, E.R. Shaw 416R stainless steel or manganese phosphate finish extra heavy bull barrel

Mil-spec 1913 steel gas block and gas tube - Two piece free float aluminum tube

A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating

Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged and headspaced

No FFL requiredVoid where prohibited by law

VARMINT STAINLESS STEEL 5.56mm NATO/.223 Rem16” Varmint, Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . $37520” Varmint, Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . $37524” Varmint, Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . $37524” Varmint, Stainless Steel Barrel, 1-14 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . $41516” Varmint, Fluted Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . $42520” Varmint, Fluted Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . $42524” Varmint, Fluted Stainless Steel Barrel, 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . $42524” Varmint, Fluted Stainless Steel Barrel, 1-14 twist. . . . . . . . . . . . . . . . . . . . . . $465

VARMINT CHROME MOLY 5.56mm NATO/.223 Rem16” Varmint, Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37520” Varmint, Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37524” Varmint, Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37516” Varmint, Fluted Chrome Moly Barrel, 1-9 twist. . . . . . . . . . . . . . . . . . . . . . . $42520” Varmint, Fluted Chrome Moly Barrel, 1-9 twist. . . . . . . . . . . . . . . . . . . . . . . $42524” Varmint, Fluted Chrome Moly Barrel, 1-9 twist. . . . . . . . . . . . . . . . . . . . . . . $425

VARMINT STAINLESS STEEL 6mm PPC Caliber 24” Varmint, Stainless Steel Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43024” Varmint, Fluted Stainless Steel Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . $470

VARMINT STAINLESS STEEL .204 Ruger Caliber24” Varmint, Stainless Steel Barrel, 1-12 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . $45024” Varmint, Fluted Stainless Steel Barrel, 1-12 twist . . . . . . . . . . . . . . . . . . . . . . $500

VARMINT FLUTED STAINLESS STEEL NEW! .22LR CaliberWith M1S Complete Bolt Carrier Assembly and Charging Handle20” Varmint, Fluted Stainless Steel Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . $585

SEE PGS 19 & 20 FOROPTIONS & UPGRADES

Shown with optional YHM Free Float Rail.

Shown with optional YHM Free Float Rail,Threaded Muzzle with A2 Flashider.

Page 22 MODEL "1" SALES Tel: 903-546-2087

Complete barrel assembly, E.R. Shaw 24" fluted manganesephosphate finish chrome moly tactical extra heavy barrel

Mil-spec 1913 steel gas block and gas tube - Two piece free float aluminum tubeA3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating

Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

18 1/2" 5.56mm NATO SPR A2 or A3With Chrome Lined Chamber and Bore5.56mm NATO Chrome Moly Heavy Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . $415STAINLESS STEEL5.56mm NATO/.223 Rem Stainless Steel Heavy Barrel, 1-7 twist . . . . . . . . . . . $470

18" 6.8 REM SPC SPR A2 or A36.8 Rem SPC Stainless Steel Heavy Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . $530

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly or polishedstainless steel heavy barrel - Forged front sight base or Mil-spec 1913 steel gas blockA2 Flashider - Round A2 handguard with heat shield - Gas tube - Aluminum delta ring

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

WITH MID-LENGTH GAS SYSTEMComplete barrel assembly with E.R. Shaw polished stainless steel heavy barrel - 5/8 x 24 thread

A2 Flashider - Forged front sight base or Mil-spec 1913 steel gas blockStandard length two piece free float aluminum tube - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

Shown with optionalYHM Free Float Rail Handguard

SEE PGS 19 & 20 FOROPTIONS & UPGRADES

Shown with optional M1S Low Profile Gas Blockand YHM Smooth Free Float Handguard.

24" TACTICAL UPPER HALF5.56mm NATO Chrome Lined Chamber and Bore 1-9 twist . . . . . . . $4606.8mm Rem SPC Chrome Lined Chamber and Bore 1-9.5 twist . . . $525NEW! 6.5 Sporter Chrome Lined Chamber and Bore 1-9 twist . . . $525

Shown with optional YHM Four Rail Gas Blockand YHM Smooth Free Float Handguard

Fax: 903-546-6346 www.model1sales.com Page 23

20" STANDARD A2 or A3 5.56mm NATO/.223 RemChrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $330

For Chrome Lined Chamber and Bore add $355.56mm Chrome Lined Government Profile Barrel, 1-7 twist. . . . . . . . . . . . . . . $380

20" STANDARD A2 or A3 5.56mm NATO/.223 RemStainless Steel Barrel 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $380Fluted Stainless Steel Barrel 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . $430

20" OCMP A2 5.56mm NATO/.223 RemE.R. Shaw Chrome Moly Heavy Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . $465E.R. Shaw Stainless Steel Heavy Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . $515Krieger .223 Stainless Steel Barrel 1-7.7 twist . . . . . . . . . . . . . . . . . . $765

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavybarrel or polished stainless steel heavy barrel - Forged front sight base - A2 Flashider

Round A2 handguard with heat shield - Gas tube - Aluminum delta ringA2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

Complete barrel assembly with National Match forged front sight base - A2 FlashiderOCMP free float handguard - Gas tube - Aluminum delta ring

A2 T7075 forged hardcoat anodized upper with mil-spec Teflon coating - National Match front & rear sightEjection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

SEE PGS 19 & 20 FOROPTIONS & UPGRADES

Shown with optional Triangle Handguard.

Page 24 MODEL "1" SALES Tel: 903-546-2087

24" STANDARD A2 or A3 5.56mm NATO/.223 RemChrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $330Stainless Steel Barrel 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . $380

20" STANDARD A2 or A3 6.8mm Remington SPC Chrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $395

For Chrome Lined Chamber and Bore add $35

20" STANDARD A2 or A3 7.62x39mm CaliberChrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $365

20" STANDARD A2 or A3 NEW! 5.45x39mm Caliber Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $395

20" STANDARD A2 or A3 NEW! 6.5mm Sporter Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $395

20" STANDARD A2 or A3 NEW! .22LR Caliber With M1S Complete Bolt Carrier Assembly and Charging HandleChrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $510Fluted Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $560Stainless Steel Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $560Fluted Stainless Steel Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $610

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavybarrel or polished stainless steel heavy barrel - Forged front sight base - A2 Flashider

Round A2 handguard with heat shield - Gas tube - Aluminum delta ringA2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by lawSEE PGS 19 & 20 FOROPTIONS & UPGRADES

Shown with Fluted Stainless Steel Barrel andoptional Viking Tactics Modular Handguard.

Fax: 903-546-6346 www.model1sales.com Page 25

16" C.A.R.A2 or A3 5.56mm NATO/.223 RemChrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $330

For Chrome Lined Chamber and Bore add $35

16" C.A.R.A2 or A3 5.56mm NATO/.223 RemStainless Steel Barrel 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . $380Fluted Stainless Steel Barrel 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . $430

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavybarrel or polished stainless steel heavy barrel - Forged front sight base - A2 Flashider

C.A.R. handguard with heat shield - Gas tube - Aluminum delta ringA2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

SEE PGS 19 & 20 FOROPTIONS & UPGRADES

16" LIGHTWEIGHT C.A.R.A2 or A3 5.56mm NATO/.223 RemLightweight Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $330

For Chrome Lined Chamber and Bore add $35

16" LIGHTWEIGHT C.A.R.A2 or A3 NEW! .22LR Caliber With M1S Complete Bolt Carrier Assembly and Charging HandleLightweight Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $490

16" LIGHTWEIGHT C.A.R.A2 or A3 9mm Caliber Lightweight Chrome Moly Barrel, 1-15 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $365

Shown with optional MidwestFree Float Extended Rail.

Page 26 MODEL "1" SALES Tel: 903-546-2087

16" C.A.R.A2 or A3 6.8mm Rem SPC Chrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $395

For Chrome Lined Chamber and Bore add $35

16" C.A.R.A2 or A3 .300 Fireball Caliber Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $365

16" C.A.R.A2 or A3 7.62x39mm CaliberChrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $365

16" C.A.R.A2 or A3 NEW! 5.45x39mm CaliberChrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $395

16" C.A.R.A2 or A3 NEW! 6.5mm SporterChrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $395

16" C.A.R.A2 or A3 NEW! .22LR Caliber With M1S Complete Bolt Carrier Assembly and Charging HandleChrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $490

16" C.A.R.A2 or A3 9mm Caliber Chrome Moly Barrel, 1-15 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $365

Shown with optional Midwest IndustriesFree Float Rail and YHM Folding Forward Grip.

SEE PGS 19 & 20 FOROPTIONS & UPGRADES

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavybarrel or polished stainless steel heavy barrel - Forged front sight base - A2 Flashider

C.A.R. handguard with heat shield - Gas tube - Aluminum delta ringA2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

Shown with optional MidwestIndustries Two Piece Rail.

Shown with optional YHMSmooth Free Float Handguard.

Fax: 903-546-6346 www.model1sales.com Page 27

16" BARREL WITH FULL LENGTH A2 HANDGUARDS & RIFLE SIGHTING RADIUS,SPECIAL GAS BLOCK DESIGN ASSURES PROPER GAS SYSTEM OPERATION

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavy barrel

A2 Flashider - Forged front sight base - Round A2 handguard with heat shield - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Aluminum delta ring

Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

16" DISSIPATOR A2 or A3 5.56mm NATO/.223 RemChrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $395

For Chrome Lined Chamber and Bore add $35

16" DISSIPATOR A2 or A3 5.56mm NATO/.223 RemStainless Steel Barrel 1-8 or 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . $445

16" DISSIPATOR A2 or A3 7.62x39mm CaliberChrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $430

16" DISSIPATOR A2 or A3 6.8mm Remington SPCChrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $460

16" DISSIPATOR A2 or A3 NEW! 5.45x39mm CaliberChrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $460

Shown with optional YHM Four Rail Gas Block,YHM Free Float Rail and YHM Flip Front and Rear Sights.

SEE PGS 19 & 20 FOROPTIONS & UPGRADES

Page 28 MODEL "1" SALES Tel: 903-546-2087

Complete barrel assembly, E.R. Shaw 11 1/2" manganese phosphate finish chrome moly barrel

Welded 5 1/2" flashider - Forged front sight base - C.A.R. handguard with heat shield

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Aluminum delta ring - Gas tube

Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

XM177 STYLE C.A.R.A2 or A3 5.56mm NATO/.223 RemChrome Moly Barrel, 1-9 twist, Hole Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . . $360Chrome Moly Barrel, 1-9 twist, Slot Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . . . $360Chrome Moly Barrel, 1-9 twist, Full Slot Flashider . . . . . . . . . . . . . . . . . . . . . . . . $375

XM177 STYLE C.A.R.A2 or A3 NEW! .22LR CaliberWith M1S Complete Bolt Carrier Assembly and Charging HandleChrome Moly Barrel, 1-16 twist, Hole Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . $525Chrome Moly Barrel, 1-16 twist, Slot Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . . $525Chrome Moly Barrel, 1-16 twist, Full Slot Flashider . . . . . . . . . . . . . . . . . . . . . . . $540

Shown with optionalTriangle Handguard.

Shown with optionalY/M Quad Rail Vented Handguard.

SEE PGS 19 & 20 FOROPTIONS & UPGRADES

Fax: 903-546-6346 www.model1sales.com Page 29

Complete barrel assembly with E.R. Shaw manganese phosphate finish EM-4 chrome moly barrel

A2 Flashider - Forged front sight base - M-4 handguard with heat shield - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Aluminum delta ring

Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

14 1/2" OR 16" EM-4 C.A.R.A2 or A3 5.56mm NATO/.223 Rem16” EM-4 Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $38016” (14 1/2” Barrel with welded Phantom Flashider) EM-4 Chrome Moly, 1-9 twist $41014 1/2” EM-4 Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . $380The 14 1/2" EM-4 upper half is for full auto or registered short barrel rifles – NFA RULES APPLYFor Chrome Lined Chamber and Bore add $35 (Not available with welded Phantom flashider)

14 1/2" or 16" EM-4 C.A.R.A2 or A3 6.8mm Remington SPC 16" EM-4 Chrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $45014 1/2" EM-4 Chrome Moly Barrel, 1-9.5 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . $450The 14 1/2" EM-4 upper half is for full auto or registered short barrel rifles – NFA RULES APPLY

For Chrome Lined Chamber and Bore add $35

16" EM-4 C.A.R.A2 or A3 NEW! 5.45x39mm Caliber EM-4 Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $450

SEE PGS 19 & 20 FOROPTIONS & UPGRADES

14 1/2" or 16" EM-4 C.A.R.A2 or A3 NEW! .22LR Caliber With M1S Complete Bolt Carrier Assembly and Charging Handle16" EM-4 Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54014 1/2" EM-4 Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . $540The 14 1/2" EM-4 upper half is for full auto or registered short barrel rifles – NFA RULES APPLY

14 1/2” EM-4 shown with optionalGas Block and YHM Two Piece Rail.

Shown with optionalYHM Smooth Free Float Handguard.

Shown with optionalY/M Quad Rail Vented Handguard.

Page 30 MODEL "1" SALES Tel: 903-546-2087

7 1/2", 10 1/4" or 11 1/2" A2 or A35.56mm NATO/.223 Rem7 1/2" Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $35010 1/4" or 11 1/2" Chrome Moly Barrel, 1-9 twist . . . . . . . . . . . . . . . . . . . . . . . . $330

For Chrome Lined Chamber and Bore add $35

11 1/2" A2 or A3 7.62x39mm Caliber Chrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $365

11 1/2" A2 or A3 NEW! 5.45x39mm Caliber Chrome Moly Barrel, 1-8 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $365

7 1/2" or 11 1/2" A2 or A3 NEW! .22LR Caliber With M1S Complete Bolt Carrier Assembly and Charging Handle7 1/2" Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $51011 1/2" Chrome Moly Barrel, 1-16 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $490

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly barrelA2 Flashider - Forged front sight base or steel gas block - Gas tube

7 1/2" upper halves come with aluminum free float tube only10 1/4" and 11 1/2" upper halves come with C.A.R. handguard with heat shield

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)Ejection port cover - Forward assist assembly - Aluminum delta ring (10 1/4" & 11 1/2" only)

Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law - NFA rule applyCommando and Pistol upper halves are for pistol lowers or full auto only

7 1/2", 10 1/4" or 11 1/2" A2 or A3 9mm Caliber7 1/2" Chrome Moly Barrel, 1-15 twist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37510 1/4" or 11 1/2" Chrome Moly Barrel, 1-15 twist . . . . . . . . . . . . . . . . . . . . . . . $365

SEE PGS 19 & 20 FOROPTIONS & UPGRADES

Shown with optionalOD Green Handguard

Shown with optionalY/M Vented Rail Handguard.

Shown with optional M1S Low Profile Gas Blockand YHM Free Float Rail Handguard.

Fax: 903-546-6346 www.model1sales.com Page 31

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw manganese phosphate finish chrome moly or polished stainless steel heavy barrel

Forged front sight base without lug - Round A2 handguard with heat shield - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

STANDARD A2 or A35.56mm NATO/.223 Rem20" or 24" Chrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . $485

For Chrome Lined Chamber and Bore add $35 - not available on 24"20" or 24" Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake . . . . . . . . . . . . $52020" or 24" Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . $53520" Fluted Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . $5856.8mm Rem SPC 20” Chrome Moly Barrel, 1-9.5 twist, 11° Target Crown . $575

For Chrome Lined Chamber and Bore add $357.62x39 Caliber 20” Chrome Moly Barrel, 1-10 twist, 11° Target Crown . . $535

Shown with optionalwelded Muzzle Brake

16" BARREL WITH FULL LENGTH A2 HANDGUARDS & RIFLE SIGHTING RADIUS,SPECIAL GAS BLOCK DESIGN ASSURES PROPER GAS SYSTEM OPERATION

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw manganese phosphate finish chrome moly or polished stainless steel heavy barrel

Forged front sight base without lug - Round A2 handguard with heat shield - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

16" DISSIPATOR A2 or A35.56mm NATO/.223 RemChrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . . $535

For Chrome Lined Chamber and Bore add $35Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake. . . . . . . . . . . . . . . . . . . . . . $570Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . $5856.8mm Rem SPC Chrome Moly Barrel, 1-9.5 twist, 11° Target Crown. . . . . . $6107.62x39mm Caliber Chrome Moly Barrel, 1-10 twist, 11° Target Crown. . . $600

Shown withoptional welded Muzzle Brake

Page 32 MODEL "1" SALES Tel: 903-546-2087

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw 16" manganese phosphate finish chrome moly or polished stainless steel heavy barrel

Forged front sight base without lug - C.A.R. handguard with heat shield - Fixed C.A.R. stock

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Gas tube - Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

16" C.A.R. A2 or A35.56mm NATO/.223 RemingtonChrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . . $485Lightweight Chrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . $485

For Chrome Lined Chamber and Bore add $35Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake . . . . . . . . . . . . . . . . . . . . . $520Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . $535Fluted Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . $585

6.8mm Remington SPC16" C.A.R. A2 or A3Chrome Moly Barrel, 1-9.5 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . $575

For Chrome Lined Chamber and Bore add $35

.300 Fireball Caliber16" C.A.R. A2 or A3Chrome Moly Barrel, 1-8 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . . $535

16" C.A.R. A2 or A3 7.62x39mm Caliber Chrome Moly Barrel, 1-10 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . $535

Shown with optionalwelded Muzzle Brake

Shown with optional A2 Buttstock

Fax: 903-546-6346 www.model1sales.com Page 33

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw manganese phosphate finish EM-4 chrome moly barrel - Forged front sight base without lug

Gas tube - M-4 handguard with heat shield - Fixed C.A.R. stock

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

16" EM-4 C.A.R. A2 or A35.56mm NATO/.223 RemingtonEM-4 Chrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . $525

For Chrome Lined Chamber and Bore add $35EM-4 Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake . . . . . . . . . . . . . . . . . $555

ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVERE.R. Shaw 11 1/2" manganese phosphate finish chrome moly barrel with welded 5 1/2" mock flashider

Forged front sight base without lug - C.A.R. handguard with heat shield - Fixed C.A.R. stock

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Gas tube - Ejection port cover - Forward assist assembly - Charging handle

Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard

Lower receiver parts set - Upper half fully assembled, gauged and headspaced

Specify AR15 or M16 - No FFL required - Void where prohibited by law

XM177 STYLE C.A.R. A2 or A35.56mm NATO/.223 RemingtonChrome Moly Barrel, 1-9 twist, with mock Flashider . . . . . . . . . . . . . . . . . . . . . . $520

Shown with optionalwelded Muzzle Brake

Page 34 MODEL "1" SALES Tel: 903-546-2087

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavybarrel or polished stainless steel heavy barrel - Forged front sight base without lug

Round A2 handguard with heat shield - Gas tube - Aluminum delta ring

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

Shown with optionalwelded Muzzle Brake

STANDARD A2 or A3 5.56 NATO/.223 Rem20" or 24" Chrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . $330

For Chrome Lined Chamber and Bore add $35 - not available on 24"20" or 24" Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake . . . . . . . . . . . . $36020" or 24" Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . $38020" Fluted Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . $4306.8mm Rem SPC 20” Chrome Moly Barrel, 1-9.5 twist, 11° Target Crown . $395

For Chrome Lined Chamber and Bore add $357.62x39 Caliber 20” Chrome Moly Barrel, 1-10 twist, 11° Target Crown . . $365

DISSIPATOR A2 or A3 5.56 NATO/.223 RemChrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . . $395

For Chrome Lined Chamber and Bore add $35Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake. . . . . . . . . . . . . . . . . . . . . . $430Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . $445

6.8mm Rem SPC Chrome Moly Barrel, 1-9.5 twist, 11° Target Crown. . . . . . $460

16" BARREL WITH FULL LENGTH A2 HANDGUARDS & RIFLE SIGHTING RADIUS,SPECIAL GAS BLOCK DESIGN ASSURES PROPER GAS SYSTEM OPERATION

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavy barrel or polished stainless steel heavy barrel

Forged front sight base without lug - Round A2 handguard with heat shield - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Aluminum delta ring

Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

Fax: 903-546-6346 www.model1sales.com Page 35

Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavybarrel or polished stainless steel heavy barrel - Forged front sight base without lug

C.A.R. handguard with heat shield - Gas tube - Aluminum delta ring

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

16" C.A.R.A2 or A3 5.56mm NATO/.223 RemChrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . . $330Lightweight Chrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . $330

For Chrome Lined Chamber and Bore add $35Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake . . . . . . . . . . . . . . . . . . . . . $360Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . $380Fluted Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . $430

16" C.A.R.A2 or A3 6.8mm Remington SPC Chrome Moly Barrel, 1-9.5 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . $395

For Chrome Lined Chamber and Bore add $35

16" C.A.R.A2 or A3 .300 Fireball CaliberChrome Moly Barrel, 1-8 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . . $365

16" C.A.R.A2 or A3 7.62x39mm Caliber Chrome Moly Barrel, 1-10 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . $365

Shown with optionalwelded Muzzle Brake

Shown with optionalFluted Stainless Steel Barrel

Page 36 MODEL "1" SALES Tel: 903-546-2087

Complete barrel assembly with E.R. Shaw manganese phosphate finish EM-4 chrome moly barrel

Forged front sight base without lug - M-4 handguard with heat shield - Gas tube

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Aluminum delta ring

Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

16" EM-4 C.A.R.A2 or A3 5.56mm NATO/.223 RemEM-4 Chrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . $380

For Chrome Lined Chamber and Bore add $35EM-4 Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake . . . . . . . . . . . . . . . . . $410

Complete barrel assembly with E.R. Shaw 11 1/2" manganese phosphate finish chrome moly barrel

Welded 5 1/2" mock flashider - Forged front sight base without lug - Gas tube

C.A.R. handguard with heat shield - Aluminum delta ring

A2 or A3 T7075 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)

Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced

No FFL required - Void where prohibited by law

XM177 STYLE C.A.R.A2 or A3 5.56mm NATO/.223 RemChrome Moly Barrel, 1-9 twist, mock Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . $360

Shown with optionalwelded Muzzle Brake

Fax: 903-546-6346 www.model1sales.com Page 37

BOLT CARRIER ASSEMBLYAR10 .308 caliber, complete. . . . . $250

CHARGING HANDLE ASSEMBLYAR10 .308 caliber, complete. . . . . . $54

Complete barrel assembly with Krieger National Match barrel

ArmaLite free float tube - ArmaLite mil-spec 1913 steel gas block - Gas tube

ArmaLite A3 forged hardcoat anodized upper receiver with mil-spec Teflon coating

ArmaLite bolt carrier assembly and charging handle - Ejection port cover

Upper half fully assembled, gauged and headspaced

No FFL required - Void where prohibited by law

20" or 26" AR10 A3 FREE FLOAT UPPER HALF .308 Caliber Complete with bolt carrier assembly and charging handle

20” or 26” Krieger National Match Chrome Moly Barrel, 1-10 twist . . . . . . . . . . . . . . . . . $1,16520” or 26” Krieger National Match Stainless Steel Barrel, 1-10 twist . . . . . . . . . . . . . . . . $1,290With optional 5/8 x 24 TPI thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . add $75

20" or 26" KRIEGER NATIONAL MATCH BARREL .308 Caliber 20” or 26” National Match Chrome Moly Barrel, 1-10 twist, with complete bolt . . . . . . . . $62020” or 26” National Match Stainless Steel Barrel, 1-10 twist, with complete bolt . . . . . . . . $745With optional 5/8 x 24 TPI thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . add $75

Jonathan Arthur Ciener, Inc. The "Atchisson" MKIIIAR15/M16 .22LR Conversion Unit• Unit contains all parts necessary to convert your firearm from existingcaliber to .22LR rimfire cartridge • Conversion takes less than a minute• No permanent alterations, quick and easy return to original caliber

AR15 Unit with 10 Round Magazine . . . . . . . . . $149AR15 Unit with 30 Round Magazine . . . . . . . . . $189M16 Unit with 30 Round Magazine . . . . . . . . . . $219Spare 10 Round Magazine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $35Spare 30 Round Magazine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $59

SIG.22LRThread Adapter1/2 x 28 TPI . . . $29

WaltherPT-22Thread Adapter1/2 x 28 TPI . . . . . $29

KNSSIG556Push Button Pivot PinWith sling mount stud . . . . . $20

Page 38 MODEL "1" SALES Tel: 903-546-2087

Model "1" Sales.22LR Conversion KitConvert your AR for use with economical .22LR ammo. Kit is designed for usewith Model 1 Sales dedicated .22LR barrels only. Kit includes one 10 round or30 round Black Dog Slimline magazine . . . . . . . . . . . . . . . . . . . . . . . . $185

AR15/M16 .22LR MagazinesFor use with Model "1" Sales and Ciener Atchisson .22LRconversion Kits. Provide reliable feeding for both semiand full auto use. Injection molded high impact polycar-bonate construction, made in the USA by Black DogMachine, LLC. In Smoke Gray and Clear.

30 Round Slimline . . . . . . . . . . . . . . . . $30Six or more . . . . . . . . . . . . . . . . . . . . . . each $25

10, 15 or 25 Round Full Body . . . . $35

Full Body M261 .22LR 25 Round MagsFor use with military 261 kits . . . . . . . . . . . . . . . . $35

.22LR MagLoader . . $10

.22LR Pistol Receiver EndcapFor use with registered .22LR pistol receiversonly, not for use with any other caliber . $23

CHROME MOLY EM-416" 1-16 twist, threaded muzzle . . . . . . . . . . . $22014 1/2" 1-16 twist, threaded muzzle. . . . . . . . . $220

FLUTED STAINLESS STEEL HEAVY20" 1-16 twist, threaded muzzle . . . . . . . . . . . $320

FLUTED STAINLESS EXTRA HEAVY VARMINT20" 1-16 twist, steel gas block sight base . . . . $320

CHROME MOLY LIGHTWEIGHT16" 1-16 twist, threaded muzzle . . . . . . . . . . . $200

CHROME MOLY HEAVY20" 1-16 twist, threaded muzzle . . . . . . . . . . . $22016" 1-16 twist, threaded muzzle . . . . . . . . . . . $200

CHROME MOLY COMMANDO/PISTOL11 1/2" 1-16 twist, threaded muzzle. . . . . . . . . $2007 1/2" 1-16 twist, threaded muzzle . . . . . . . . . $200

1/2x28 1/2x28

E.R. SHAW .22LR Caliber E.R. SHAW .22LR Caliber

CHROME MOLY XM177 STYLE11 1/2" barrel with 5 1/2" welded flashider

16" 1-16 twist, hole flashider . . . . . . . . . . . . . . $23516" 1-16 twist, slot flashider . . . . . . . . . . . . . . $23516" 1-16 twist, full slot flashider . . . . . . . . . . . $250

For use with Model "1" Sales .22LR Conversion KitAll barrels as shown, does not include front sight post.

Fax: 903-546-6346 www.model1sales.com Page 39

CHROME MOLY HEAVY16" 1-9 twist, threaded muzzle . . . . . . . . . . . . $18516" 1-9 twist, 11° target crown, no bayo lug. . $18520" 1-9 twist, threaded muzzle . . . . . . . . . . . . $18520" 1-9 twist, 11° target crown, no bayo lug. . $185Chrome Lined Chamber/Bore . . . . add $35Fluted Barrel . . . . . . . . . . . . . . . . . . . . add $5024" 1-9 twist, threaded muzzle . . . . . . . . . . . . $18524" 1-9 twist, 11° target crown, no bayo lug. . $185

CHROME MOLY HEAVY16" 1-9 twist, welded brake, no bayo lug. . . . . $22020" 1-9 twist, welded brake, no bayo lug. . . . . $22024" 1-9 twist, welded brake, no bayo lug. . . . . $220Fluted Barrel not available in 24" . . . . . add $50

CHROME MOLY DISSIPATOR16" 1-9 twist, threaded muzzle . . . . . . . . . . . . $22516" 1-9 twist, 11° target crown, no bayo lug. . $225Chrome Lined Chamber/Bore . . . . add $3516" 1-9 twist, welded brake, no bayo lug. . . . . $260

CHROME MOLY EXTRA HEAVY BULL16" 1-9 twist, mil-spec 1913 steel gas block . . $24020" 1-9 twist, mil-spec 1913 steel gas block . . $24024" 1-9 twist, mil-spec 1913 steel gas block . . $240Threaded Muzzle . . . . . . . . . . . . . . . . . . . add $50Fluted Barrel . . . . . . . . . . . . . . . . . . . . add $50

CHROME MOLY EM-414 1/2" 1-9 twist, threaded muzzle . . . . . . . . . $22016" 1-9 twist, threaded muzzle . . . . . . . . . . . . $220Chrome Lined Chamber/Bore . . . . add $3516" 1-9 twist, welded brake, no bayo lug. . . . . $25016" 1-9 twist, 11° target crown, no bayo lug. . $220

CHROME MOLYCOMMANDO/PISTOL

7 1/2" 1-9 twist, threaded muzzle . . . . . . . . . . $20010 1/4" 1-9 twist, threaded muzzle . . . . . . . . . $18511 1/2" 1-9 twist, threaded muzzle . . . . . . . . . $185Chrome Lined Chamber/Bore . . . . add $35

CHROME MOLY LIGHTWEIGHT16" 1-9 twist, threaded muzzle . . . . . . . . . . . . $18516" 1-9 twist, 11° target crown, no bayo lug. . $185Chrome Lined Chamber/Bore . . . . add $35

CHROME MOLY XM177 STYLE11 1/2" barrel with 5 1/2" welded flashider

16" 1-9 twist, hole flashider . . . . . . . . . . . . . . . $22016" 1-9 twist, slot flashider . . . . . . . . . . . . . . . $22016" 1-9 twist, full slot flashider . . . . . . . . . . . . $23516" 1-9 twist, mock flashider, no bayo lug . . . . $220

CHROME MOLY GOV’T PROFILEWith Chrome Lined Chamber/Bore

20" 1-7 twist, threaded muzzle . . . . . . . . . . . . $245

CHROME MOLY TACTICALFluted with Chrome Lined Chamber/Bore 24" 1-9 twist, mil-spec 1913 steel gas block . . $305Threaded Muzzle . . . . . . . . . . . . . . . . . . . add $50

CHROME MOLY SPR HEAVYWith Chrome Lined Chamber/Bore

18 1/2" 1-9 twist, threaded muzzle . . . . . . . . . $265

E.R. SHAW 5.56 NATO/.223 E.R. SHAW 5.56 NATO/.223

E.R. SHAW 5.56mm NATO

CHROME MOLY HEAVY 1/2x3616" 1-9 twist, threaded muzzle . . . . . . . . . . . . $23520" 1-9 twist, threaded muzzle . . . . . . . . . . . . $235

CHROME MOLY TACTICAL24" Fluted, Chrome Lined Chamber/Bore

1-9 twist, mil-spec 1913 steel gas block . . . . . . $370Threaded Muzzle . . . . . . . . . . . . . . . . . . . add $50

E.R. SHAW 6.5mm Sporter

All barrels as shown, does not include front sight post.

1/2x28 1/2x28

1/2x28

Page 40 MODEL "1" SALES Tel: 903-546-2087

CHROME MOLY HEAVY16" 1-9.5 twist, threaded muzzle . . . . . . . . . . . $23516" 1-9.5 twist, 11° target crown, no bayo lug $23520" 1-9.5 twist, threaded muzzle . . . . . . . . . . . $23520" 1-9.5 twist, 11° target crown, no bayo lug $235Chrome Lined Chamber/Bore . . . . . . . add $35

CHROME MOLY EM-414 1/2" 1-9.5 twist, threaded muzzle. . . . . . . . $27016" 1-9.5 twist, threaded muzzle . . . . . . . . . . . $270Chrome Lined Chamber/Bore . . . . add $35

CHROME MOLY DISSIPATOR16" 1-9.5 twist, threaded muzzle . . . . . . . . . . . $27516" 1-9.5 twist, 11° target crown, no bayo lug $275

STAINLESS STEEL HEAVY DISSIPATOR16" 1-8 or 1-9 twist, threaded muzzle. . . . . . . $28516" 1-8 or 1-9, 11° target crown, no bayo lug $285

STAINLESS STEEL EXTRA HEAVY BULL16" 1-8 or 1-9, mil-spec 1913 steel gas block . $25520" 1-8 or 1-9, mil-spec 1913 steel gas block . $25524" 1-8 or 1-9, mil-spec 1913 steel gas block . $25524" 1-14 twist, mil-spec 1913 steel gas block . $295Threaded Muzzle . . . . . . . . . . . . . . . . . . . add $50Fluted Barrel . . . . . . . . . . . . . . . . . . . . add $50

CHROME MOLY TACTICAL24" Fluted, Chrome Lined Chamber/Bore

1-9.5 twist, mil-spec 1913 steel gas block . . . . $370Threaded Muzzle . . . . . . . . . . . . . . . . . . . add $50

STAINLESS STEEL SPR HEAVYFor Mid-Length Gas System

18" 1-9.5 twist, threaded muzzle, gas block . . $335

E.R. SHAW 6.8mm Rem SPC

CHROME MOLY HEAVY 1/2x2811 1/2" 1-8 twist, threaded muzzle . . . . . . . . . $23516" 1-8 twist, threaded muzzle . . . . . . . . . . . . $23520" 1-8 twist, threaded muzzle . . . . . . . . . . . . $235

CHROME MOLY EM-416" 1-8 twist, threaded muzzle . . . . . . . . . . . . $270

CHROME MOLY DISSIPATOR16" 1-8 twist, threaded muzzle . . . . . . . . . . . . $275

E.R. SHAW 5.45x39 Caliber

CHROME MOLY HEAVY 1/2x3611 1/2" 1-10 twist, threaded muzzle . . . . . . . . $22016" 1-10 twist, threaded muzzle . . . . . . . . . . . $22016" 1-10 twist, 11° target crown, no bayo lug. $22020" 1-10 twist, threaded muzzle . . . . . . . . . . . $22020" 1-10 twist, 11° target crown, no bayo lug. $220

CHROME MOLY DISSIPATOR16" 1-10 twist, threaded muzzle . . . . . . . . . . . $25516" 1-10 twist, 11° target crown, no bayo lug. $255

E.R. SHAW 7.62x39 CaliberCHROME MOLY HEAVY 5/8x2416" 1-8 twist, threaded muzzle . . . . . . . . . . . . $22016" 1-8 twist, 11° target crown, no bayo lug. . $220

E.R. SHAW .300 Fireball

CHROME MOLY HEAVY 1/2x367 1/2" 1-15 twist, threaded muzzle . . . . . . . . . $20510 1/4" 1-15 twist, threaded muzzle . . . . . . . . $20511 1/2" 1-15 twist, threaded muzzle . . . . . . . . $20516" 1-15 twist, threaded muzzle . . . . . . . . . . . $205

CHROME MOLY LIGHTWEIGHT16" 1-15 twist, threaded muzzle . . . . . . . . . . . $205

E.R. SHAW 9mm Caliber

STAINLESS STEEL EXTRA HEAVY BULL24" 1-12 twist, mil-spec 1913 steel gas block . $320Fluted Barrel . . . . . . . . . . . . . . . . . . . . add $50

E.R. SHAW .204 Ruger

STAINLESS STEEL EXTRA HEAVY BULL24" 1-10 twist, mil-spec 1913 steel gas block . $330

E.R. SHAW 6mm PPC

STAINLESS STEEL HEAVY16" 1-8 or 1-9 twist, threaded muzzle. . . . . . . $23520" 1-8 or 1-9 twist, threaded muzzle. . . . . . . $23524" 1-8 or 1-9 twist, threaded muzzle. . . . . . . $23516" 1-8 or 1-9, 11° target crown, no bayo lug $23520" 1-8 or 1-9, 11° target crown, no bayo lug $23524" 1-8 or 1-9, 11° target crown, no bayo lug $235Fluted Barrel not available in 24" . . . . . add $50

STAINLESS STEEL SPR HEAVY18 1/2" 1-7 twist, threaded muzzle . . . . . . . . . $315

KRIEGER STAINLESS STEEL HEAVY.223 Rem - OCMP Legal

20" 1-7.7 twist, threaded muzzle . . . . . . . . . . . $46520" 1-7.7 twist, target crown, no bayo lug. . . . $440

E.R. SHAW 5.56 NATO/.223All barrels as shown, does not include front sight post.

1/2x28 1/2x36

Fax: 903-546-6346 www.model1sales.com Page 41

1. A2 front sight . . . . . . . . . . . . . . . . . . . $4.001. A1 front sight . . . . . . . . . . . . . . . . . . . $2.001. NM front sight, .050 . . . . . . . . . . . . . $12.002. Front sight detent. . . . . . . . . . . . . . . . $1.003. Front sight detent spring . . . . . . . . . . $1.004. Front sling swivel . . . . . . . . . . . . . . . . $3.005. Front sling swivel roll pin . . . . . . . . . . $1.005. Front sling swivel rivet . . . . . . . . . . . . $1.506. Barrel nut . . . . . . . . . . . . . . . . . . . . . . $7.007. Barrel extension . . . . . . . . . . . . . . . $20.007. Barrel extension, EM-4 . . . . . . . . . . $25.00

Barrel extension pin . . . . . . . . . . . . . . $1.008. Forged front sight base, with lug . . . $25.008. Forged front sight base, without lug $25.00

Shoot ThroughMuzzle Cap . . $1.00

National MatchFront SightWith four set screws,available with or withoutbayonet lug . . . . . . . . . . . $35

Front SightSwivel Stud . . . . $35

Blank Firing Adapter . . . . . . . $10

KNS PrecisionFront SightsStandard BodyStandard Crosshair . $32Duplex Crosshair . . $32Hooded BodyStandard Crosshair . $32Duplex Crosshair . . $32

Tactical Front Sight . $45.50

Stan

dard

Dup

lex

Tact

ical

KNS Precision Front SightsCNC machined steel, precision shaped, availablein 7 configurations: Square .034, .052 or .072;Round .034, .052 or .072; and V-notch.

$7 Each or Set of all 7 for $32

1. Handguards - See Pages 51 and 522. Gas tube roll pin, extra long for gas block $1.002. Gas tube roll pin . . . . . . . . . . . . . . . . $1.003. Gas tube, standard. . . . . . . . . . . . . . $12.003. Gas tube, CAR. . . . . . . . . . . . . . . . . $12.003. Gas tube, pistol . . . . . . . . . . . . . . . . $12.004. Flashider,A1, 1/2 x 28 . . . . . . . . . . . . $8.004. Flashider,A2, 1/2 x 28 . . . . . . . . . . . . $8.005. Flashider crush washer 1/2” . . . . . . . $2.005. Flashider crush washer 5/8” . . . . . . . $4.00

5. Flashider split washer . . . . . . . . . . . . $1.005. Flashider peel washer . . . . . . . . . . . . $3.006. Snap ring . . . . . . . . . . . . . . . . . . . . . . $1.007. Weld spring . . . . . . . . . . . . . . . . . . . . $3.008. Delta ring, aluminum . . . . . . . . . . . . . $7.009. Barrels - See Pages 38, 39 and 4010. Handguard cap, round . . . . . . . . . . . . $3.0010. Handguard cap, triangle . . . . . . . . . . . $3.00

Delta ring assembly . . . . . . . . . . . . . $10.00

Page 42 MODEL "1" SALES Tel: 903-546-2087

Muzzle Brakes 5.56mm1. Threaded brake, 1/2x28. . . . . . . . . . . . . $252. Threaded steel brake, 1/2x28 . . . . . . . . $253. Threaded titanium brake, 1/2x28 . . . . . $654. 3-1/4” threaded brake, 1/2x28 . . . . . . . $355. Set screw aluminum brake, 1/2x28 . . . . $25

1. 2. 3. 4. 5.

1. 2. 3. 4. 5.

Flash Hiders1. A1 birdcage flash hider, 1/2x28 . . . . . . . . . $81. A1 birdcage flash hider, 1/2x36 . . . . . . . . $202. A2 birdcage flash hider, 1/2x28 . . . . . . . . . $82. A2 birdcage flash hider, 1/2x36 . . . . . . . . $202. A2 birdcage flash hider, 5/8x24 . . . . . . . . $253. Phantom flash hider, 1/2x28 . . . . . . . . . . . $253. Phantom flash hider, 1/2x36 . . . . . . . . . . . $353. Phantom flash hider, 5/8x24 . . . . . . . . . . . $384. Phantom C7 flash hider, 1/2x28 . . . . . . . . $255. Three Prong flash hider, 1/2x28 . . . . . . . . $12

6. Reverse flash hider, 1/2x28 . . . . . . . . . . . . $187. 5-1/2” flash hider with holes, 1/2x28 . . . . $208. 5-1/2” flash hider with slots, 1/2x28. . . . . $159. 5-1/2” flash hider with full slots, 1/2x28. . $45

Phantom StyleMuzzle Brake Compensator1/2x28 . . . . . . . . . . . . . . . . . . . . . . . . . $29

6.

7.

8.

9.PrimaryWeaponSystems

PWS DNTC Compensator1/2x28 . . . . . . . . . . . . . . . . . . . . . . . . . $69

Mil-Spec1913 Gas Block.750 diameter . . . $35.850 diameter . . . $35.938 diameter . . . $35

Rail Gas BlocksTwo Rail, .750 diameter . . . . . . . . . . . $72Four Rail, .750 diameter . . . . . . . . . . $74

Mini LowProfileGas Block.750 diameter . . . $35

M1S LowProfileGas Block.750 diameter . . . . . . . . . . . . . . . . . . . $43.938 diameter . . . . . . . . . . . . . . . . . . . $43

Fax: 903-546-6346 www.model1sales.com Page 43

YHM FlipFront SightTower$89 PRI Flip

Front SightGas Block

.750 diametercrossbolt $179

Y/M Flip FrontSight Gas Block

$130

MI Folding FrontSight Tower $155

YHM FlipFront Sight

Gas block mounted . . . . $79Forearm mounted. . . . . . $79

MI Flip-UpFront Sight

MCTAR-FFG Gas block mount . $89MCTAR-FFR Forearm mount $89

Removable Front Sight$65

BUIS RemovableRear Sight $95

Four ApertureFlip Rear Sight $85

YHM RemovableRear Sight . . . . . . . . $54Mounts to picatinny rail, 1/2MOA windage adjustment,standard flip peep aperture.

YHM FlipRear Sight . . . . . . . . $89Mounts to picatinny rail, 1/2MOA windage adjustment,standard flip peep aperture.

MI Flip Rear SightMil-spec hard coat anodizedwith locking detent. . . . . $105

MI SPLPFlip Rear Sight

Same plane Low Profile . . $125

GG&GA2 BUISBack Up Iron Sight#1005 . . . $124

GG&GFlip Front SightGas BlockBolt on, with slingswivel #1297 . . $173

GG&G FlipFront Sight

#1023 Gas Block Mount . . $135

GG&GFlip Front SightSpring Actuated

#1281 Gas Block Mount $156#1282 Forearm Mount. . $156

GG&G SpringActuated A2 BUIS

Back Up Iron Sight#1005S . . . $159

GG&G MAD BUISBack Up Iron Sight#1006 . . . $140

Williams MatchRear Sight

For A3 . . . . . . . . . . $85

PRi FlipRear Sight

05-0029 . . $135

Page 44 MODEL "1" SALES Tel: 903-546-2087

Complete A2 Upper Receiver . . $135With ejection port cover, forward assist, rear sightA2 Upper, stripped . . . . . . . . . . . . . $100

Complete A3 Upper Receiver . . $110With ejection port cover and forward assistA3 Upper, stripped . . . . . . . . . . . . . $100

ForgedRemovableCarry HandleWith standard sight aperture. . . . . . . $95With National Match sight aperture . $95 KNS Elevation

AdjustableRear SightMicro elevation adjustment for A1 and A2uppers, may be installed on all AR receiversthat use standard flip sight. Includes .036, .040and .052 screw-in apertures . . . . . . . . . . $48

A. Windage screw roll pin . . . . . . . . . . . $1.00B. Windage knob . . . . . . . . . . . . . . . . . . $6.00C. A2 rear sight detent spring . . . . . . . . $1.00D. A2 rear sight detent ball . . . . . . . . . . $1.00E. A2 windage screw . . . . . . . . . . . . . . . $2.00F. A2 aperture . . . . . . . . . . . . . . . . . . . . $7.00F. A2 NM aperture . . . . . . . . . . . . . . . $10.00G. Rear sight base flat spring . . . . . . . . . $1.00H. Rear sight base . . . . . . . . . . . . . . . . $15.00

1. A2 rear sight, complete. . . . . . . . . . $35.001. A2 NM rear sight, complete . . . . . . $50.002. A2 sight base roll pin . . . . . . . . . . . . $1.003. A2 rear sight base spring . . . . . . . . . $1.004. Ball bearing . . . . . . . . . . . . . . . . . . . . $1.005. A2 sight base spring . . . . . . . . . . . . . $1.006. A2 loc-tite screw. . . . . . . . . . . . . . . . $2.007. Elevation index . . . . . . . . . . . . . . . . . $6.008. Elevation index knob. . . . . . . . . . . . . $6.009. Ejection port cover C-clip . . . . . . . . $1.0010. Ejection port cover rod . . . . . . . . . . $1.0011. Ejection port cover spring . . . . . . . . $1.0012. Ejection port cover . . . . . . . . . . . . . . $5.0013. Forward assist roll pin. . . . . . . . . . . . $1.0014. Forward assist assembly, round. . . . $12.0014. Forward assist assembly, tear drop. $15.0015. Forward assist spring . . . . . . . . . . . . $1.00Ejection port cover assembly . . . . . . $6.009mm Ejection port cover assembly $10.00

Rock River ArmsTacticalRemovableCarry Handle With rear sight . . . $165

Forged Upper ReceiversHardcoat Anodized - Mil-spec Teflon Coating

9mm A2 Upper Receiver . . . . . . $165With deflector, ejection port cover, rear sight9mm A2 Upper, stripped. . . . . . . . $130

9mm A3 Upper Receiver . . . . . . $140With deflector and ejection port cover9mm A3 Upper, stripped. . . . . . . . $130

HoodedRear SightAperture$45

Fax: 903-546-6346 www.model1sales.com Page 45

Young National Match Bolt CarrierStripped . . . . $145 / Complete . . . . $235

AR15 or M16 Bolt Carrier AssemblyComplete, 5.56mm/.223 . . . . . . . . . $145Complete, 7.62x39mm . . . . . . . . . . $155Complete, 5.45x39mm . . . . . . . . . . $165Complete, 6.5mm Sporter. . . . . . . . $165Complete, 6.8mm SPC . . . . . . . . . . $165

Chrome Bolt Carrier AssemblyComplete w/chrome bolt, 5.56/.223 $195Complete with black bolt, 7.62x39 . $205Complete with black bolt, 5.45x39 . $205Complete w/black bolt, 6.5 Sporter . $205Complete with black bolt, 6.8 SPC . $205

1- Badger Charging Handlewith extended latch . . . . . . . . . . . . . . . . . $30.00Badger extended latch only . . . . . . . . . . . $18.002- Standard Charging HandleComplete. . . . . . . . . . . . . . . . . . . . . . . . . . $16.00Steel Charging HandleStandard latch, complete. . . . . . . . . . . . . . $40.003- Extended Latch Charging HandleComplete. . . . . . . . . . . . . . . . . . . . . . . . . . $19.00Standard latch only . . . . . . . . . . . . . . . . . . . $2.00Extended latch only. . . . . . . . . . . . . . . . . . . $7.00Charging handle latch spring. . . . . . . . . . . . $1.00Charging handle latch roll pin. . . . . . . . . . . $1.004- Wook Ambi Charging Handlewith extended latch . . . . . . . . . . . . . . . . . $22.00Wook ambi extended latch only . . . . . . . $11.00

Tactical LatchCharging HandleComplete . . . . . . . . . . . $25.00Tactical latch only . . . . . $15.00

1. 2. 3. 4.

Bolt CarrierGroup Parts1. Firing pin,AR15 . . . $7.001. Firing pin, M16 . . . . $7.001. Firing pin, 5.45x39. . . . . . . . . . . . . . . $20.001. Titanium firing pin,AR15 . . . . . . . . . $21.001. Titanium firing pin, M16 . . . . . . . . . . $21.002. Firing pin retaining pin . . . . . . . . . . . . $1.002. Firing pin retaining pin, chrome plated . $6.003. Cam pin. . . . . . . . . . . . . . . . . . . . . . . . $5.004. Carrier, stripped AR15 . . . . . . . . . . . $65.004. Carrier,AR15 with key . . . . . . . . . . . $80.004. Carrier, stripped AR15, chrome plated $95.004. Carrier, stripped M16 . . . . . . . . . . . . $65.004. Carrier, M16 with key. . . . . . . . . . . . $80.004. Carrier, stripped M16, chrome plated. $95.005. Gas key . . . . . . . . . . . . . . . . . . . . . . . $11.005. Gas key, chrome plated . . . . . . . . . . $18.006. Gas key screw. . . . . . . . . . . . . . . . . . . $1.006. Gas key screw, chrome plated . . . . . . $4.00

BoltAssemblyParts1. Gas rings (set of 3) . . . $2.001. McFarland one piece gas ring. . . . . . . $3.002. Extractor pin . . . . . . . . . . . . . . . . . . . $1.002. Extractor pin, chrome plated. . . . . . . $4.003. Ejector pin . . . . . . . . . . . . . . . . . . . . . $1.004. Ejector spring . . . . . . . . . . . . . . . . . . . $1.005. Ejector . . . . . . . . . . . . . . . . . . . . . . . . $4.005. Ejector, chrome plated . . . . . . . . . . . . $8.006. Extractor, 5.56/.223 . . . . . . . . . . . . . $14.006. Extractor, chrome plated, 5.56/.223. $21.006. Extractor, 7.62x39mm . . . . . . . . . . . $18.006. Extractor, 5.45x39mm . . . . . . . . . . . $18.007. Extractor spring with insert . . . . . . . $2.007. Extractor spring, heavy duty . . . . . . . $1.008. Bolt, stripped, 5.56/.223 . . . . . . . . . . $40.008. Bolt, stripped, chrome plated, 5.56/.223 $55.00Complete Bolt Assembly, 5.56/.223 $55.00Complete Bolt Assembly, Chrome.223 caliber only . . . . . . . . . . . . . . . . . . $85.00Complete Bolt Assembly, 7.62x39 . $67.00Complete Bolt Assembly, 5.45x39 . $75.00Complete Bolt Assembly, 6.8 SPC . $75.00

9mm Complete Bolt Carrier Assembly. . $195

Page 46 MODEL "1" SALES Tel: 903-546-2087

1. Standard recoil spring . . . . . . . . . . . $3.001. CAR recoil spring . . . . . . . . . . . . . . $3.002. Standard buffer . . . . . . . . . . . . . . . $12.002. CAR buffer . . . . . . . . . . . . . . . . . . . $10.002. Colt CAR buffer, heavy . . . . . . . . . . $35.002. Colt 2H buffer . . . . . . . . . . . . . . . . $45.002. Colt 3H buffer . . . . . . . . . . . . . . . . $55.003. Standard buffer tube . . . . . . . . . . . . $12.003. CAR buffer tube, 4 position . . . . . . $18.003. CAR buffer tube, 6 position . . . . . . $25.003. CAR buffer tube, milspec 5 position. $45.004. Safety selector,AR15. . . . . . . . . . . . $12.004. Safety selector, M16 . . . . . . . . . . . . $12.005. Bolt catch detent spring . . . . . . . . . . $1.006. Bolt catch detent . . . . . . . . . . . . . . . $1.007. Bolt catch . . . . . . . . . . . . . . . . . . . . . $6.008. Bolt catch roll pin . . . . . . . . . . . . . . . $1.009. Mag catch . . . . . . . . . . . . . . . . . . . . . $4.0010. Take down detent spring . . . . . . . . . $1.0011. Take down detent . . . . . . . . . . . . . . . $1.0012. Mag catch spring . . . . . . . . . . . . . . . . $1.0013. Mag catch button, aluminum. . . . . . . $4.0014. Pivot pin, 1/4” . . . . . . . . . . . . . . . . . . $4.0014. Pivot pin, 1/4” w/ball bearing detent . . $5.00

Pivot pin detent. . . . . . . . . . . . . . . . . $1.00Pivot pin spring . . . . . . . . . . . . . . . . . $1.00

14. Pivot pin, 5/16” w/ball bearing detent. . $5.00Pivot pin offset - Colt . . . . . . . . . . . . $5.00Pivot pin offset bushing-Colt. . . . . . $5.00

15. Disconnector,AR15 . . . . . . . . . . . . . $5.0015. Disconnector, M16 . . . . . . . . . . . . . . $5.00

16. Pistol grip screw . . . . . . . . . . . . . . . . $1.0017. Pistol grip star washer . . . . . . . . . . . $1.0018. Pistol grip,A2, black . . . . . . . . . . . . . $6.0018. Pistol grip,A2, OD green . . . . . . . . . $8.0019. Safety selector detent spring . . . . . . $1.0020. Safety selector detent. . . . . . . . . . . . $1.0021. Hammer and trigger pins . . . . . each $1.0021. Anti-walk hammer & trigger pins. set of 2 $3.0022. Takedown pin . . . . . . . . . . . . . . . . . . $4.0023. A2 stock spacer . . . . . . . . . . . . . . . . $2.0024. Hammer,AR15 . . . . . . . . . . . . . . . . $15.0024. Hammer, M16 . . . . . . . . . . . . . . . . . $15.0024. Hammer, 9mm. . . . . . . . . . . . . . . . . $25.0025. Hammer spring . . . . . . . . . . . . . . . . . $2.00

Auto sear, M16 . . . . . . . . . . . . . . . . $15.00Auto sear pin, M16 . . . . . . . . . . . . . . $1.00Mag catch assembly. . . . . . . . . . . . . . $8.00Bolt catch assembly . . . . . . . . . . . . . $8.50

CAR Stock Lock Ring . . . . . . . . $5.00CAR Stock Lock Plate . . . . . . . $3.00Reduced Power Spring SetHammer,Trigger & Disconnector Spring. $9.00

AR15 Lower Receiver Parts KitsWith standard trigger . . . . . . . . . . . . . . . . . $69With Jard Single Stage Adjustable Trigger. $196With Jewell Trigger Assembly . . . . . . . . . . $260With RRA Two Stage Trigger . . . . . . . . . . $174With Timney Match Trigger, Standard. . . . $243With Timney Match Trigger, Skeletonized $308M16 Lower Receiver Parts KitWith sear . . . . . . . . . . . . . . . . . . . . . . . . . . $79

3 Shot Burst Kit Changes FullAuto M16 to 3 Shot Burst. Includes hammer,trigger, 2 disconnectors, 2 disconnectorsprings, hammer spring, cam and cam spring.NFA rules apply . . . . . . . . . . . . . . . . . . . . $85

Gapper . . . $3Fills the void in front

of the pistol grip.

Accu-WedgeBuffer

$3

9mm MagwellConversion Block$160

9mm CAR Buffer $25

Fax: 903-546-6346 www.model1sales.com Page 47

Ambi SafetyAR15 or M16 . . . $30

Lower Receiver Parts1. Disconnector spring. . . . . . . . . . . . . . $1.002. Trigger,AR15. . . . . . . . . . . . . . . . . . . $12.002. Trigger, M16 . . . . . . . . . . . . . . . . . . . $12.00

Trigger pin. . . . . . . . . . . . . . . . . . . . . . $1.003. Trigger spring . . . . . . . . . . . . . . . . . . . $2.004. Buffer detent . . . . . . . . . . . . . . . . . . . $1.005. Buffer detent spring . . . . . . . . . . . . . . $1.006. Trigger guard, aluminum . . . . . . . . . . . $5.007. Trigger guard roll pin . . . . . . . . . . . . . $1.00

Trigger Guard Assembly . . . . . . . . . . . $6.00

KNS Stainless SteelTrigger/Hammer Pins.154 diameter, Set of two . . . . . . . . . . . . $4.50

Jard Single Stage Adjustable Trigger1 1/2 lb, 2 lb, 3 lb and 4 lb . . . . . . . . . $147

Jewell Trigger Assembly . . . . . . . . $211

Rock River Arms OCMP LegalMatch Two Stage Trigger.155 Trigger Pin Size. . . . . . . . . . . . . $125.170 Trigger Pin Size. . . . . . . . . . . . . $145

KNSPRECISION

Extra Large AluminumMag Catch Button . . . . $8

MagpulEnhancedTrigger Guard. . . . . . . . . . . . . . . $19

Timney Drop-InMatch Triggers.155 or .170 trigger pinsize with 3 lb or 4 lb pull.Standard . . . . . . . $194Skeletonized . . . . $259

Palombo TitaniumHammer . . . . . . $139

Ambi BoltCatch . . $25

Extended BoltCatch . . . . . .$18

KNS Push ButtonPivot Pin with Stud.250 diameter . . . . $20

KNS Push ButtonPivot Pins.250 and .315 . . $16.00

KNS Front PivotPin with Stud.250 and .315 . . $13.50

KNS Push ButtonTake-Down PinIn .250 diameter . . $16.00

KNS Pivot Pin.250 diameter . . $13.50

YHM EZ PullTakedown Pin SetHeat treated, mil-spec plated . . . . . . $18

KNS Sear PinNon-Rotating416 Stainless with Phosphate finish. . . $29

KNS Perma-PinFiring pin retainer, replace cotter pin . . . $8

KNS Non-RotatingTrigger/Hammer Pin SetWith lubrication ports, anti-creepretainers, pin installation tool and2 allen wrenches. In .154 stan-dard, .155 oversize or .170 Colt.

GEN 2 - Black . . . . . . . . . $32OD Green or Dark Earth . $36GEN 2/MOD 2 - Black. $32OD Green or Dark Earth . $36

Page 48 MODEL "1" SALES Tel: 903-546-2087

A2 ButtstockComplete with buffer, spring.

Black . . . . . . . . . $55 / Green . . . . . . . $65A2 Buttstock, stripped with buttplateBlack . . . . . . . . . $30 / Green . . . . . . . $40A2 buttplate . . . . . . . . . . . . . . . . . . . . . . . . . $5A2 trapdoor assembly . . . . . . . . . . . . . . . . . $6Buttstock swivel . . . . . . . . . . . . . . . . . . . . . . $3A2 upper buttplate screw . . . . . . . . . . . . . . $1A2 lower buttplate screw . . . . . . . . . . . . . . $1

Newly Manufactured A1ButtstockComplete with buffer and spring . . . $55

A2 StockPaddedCheekrest $20

LE TacticalStock

With buffer, spring.Black . . . . . . . . . . . . . . . $50Green . . . . . . . . . . . . . . $55

M-4 CAR StockComplete with buffer, spring,

in 6 position collapsible or fixed.Black . . . . . . . . . . . . . . . . . . . . . . . . . . $78Green . . . . . . . . . . . . . . . . . . . . . . . . . $85

ACE ARFXSkeleton Stock

Standard . . . . . . . . . . . . $90

ACE M4 SOCOMFive position adjustable

Long . . . . . . . . . . . . . . . . . . . . . . . . . $210Short . . . . . . . . . . . . . . . . . . . . . . . . $190

FiberlightCAR Stock

Complete with buffer, spring,in 4 position collapsible or fixed.

Black . . . . . . . . . $42 / Green . . . . . . . $52

Aluminum CAR StockBlack, complete with buffer, spring,in 4 position collapsible or fixed . . . . $85

ACE ARFX-EEntry Stock . . . $100

ACE STOCKSAll include buffer tube, buffer, recoil spring.

ACE ARULStock . . . . $84

ACE .22LRFolding StockDedicated .22LR. . . . $120

PistolRecoil Buffer With tube, foam tube cover, buffer, spring and tactical end plate . . $45Foam Recoil Buffer Cover . . . . . . . $8

Fax: 903-546-6346 www.model1sales.com Page 49

Delta StyleCheek Piece . . $50

ProCheekPiece . . . $55

StarCheekPiece . . . $60

Ironstone NRACompetitionStock . . . . . $325

Includes special extension tube. Ergonomicdesign, quick and easy adjustable length of pull,weight, drop and cant. Mounts without modifi-cation to receiver or charging handle.

Ironstone DelrinButtstock . . . $215

Complete with buffer and spring. Fullyadjustable, butt plate moves up and down, cantsclockwise or counter clockwise and moves inor out for adjusting length of pull.

Viking RubberRecoil PadsC.A.R. Stock . . . . . . $10M-4 Stock . . . . . . . . $15

SOGRubber Recoil PadBlack, OD or Tan . . . . . . . . . $20

Ribbed RubberRecoil PadsC.A.R. Stock . . . . . . $12M-4 Stock . . . . . . . . $16

C.A.R. CheekPiece . . . $25

M-4 CheekPiece . . . $25

Delta Style Cheek Pieces

Available forAR15 or AR10MagPul PRSField Precision Stock, adjustable for height andlength of pull, includes all mounting hardware andtwo ambi sling loops. Available in Black or ODGreen, Made in USA. . . . . . . . . . . . . . . . . . $250

LMTSOPMODStock only . . . . . . . . . . . $197Complete with five position milspectube, spring and buffer . . . . . . . $255

MagpulCTR StockStock only . . . . . . . . . $95Complete with four positiontube, spring and buffer . . . . . . $135Complete with six position tube,spring and buffer. . . . . . . . . . . . . . . . . . . . . $155

MagpulUBR Stock

Includes the necessary EntryReceiver Extension Tube and all

mounting hardware . . . . . . $265

Page 50 MODEL "1" SALES Tel: 903-546-2087

Standard A2Pistol GripBlack . . . . . . . . $6Green . . . . . . . $8

SierraPrecision

Grip . . . $35

Stippled HardPlastic Grip

$30

PSG1 StylePlastic Grip $40

ERGO Grip4005SG Sure Grip

Ambidextrous,Black or OD Green. . . . . $24

ERGO Grip4001SGSure GripLeft Hand, Black orOD Green . . $27

ERGO Grip4015X RigidAmbidextrous, Black only. . $21

ERGO Grip4010X RigidRight Hand, Black only . . . . . $21

ERGOA2 Sto Grip 4095With trap door . . . . . . $12

ERGO Grip4000SG Sure Grip

Right Hand, Black only . . . . $24

ERGO Grip4011X Rigid

Left Hand, Black only . . . . . . $24

ERGOTactical

Deluxe Grip4055 Sure Grip

Ambi with Palm Shelf,Black or OD Green . . $60

ERGO GRIPS

Trapdoor GripRubber Plug . . . . . . $5

ERGOTrapdoor Grip Rubber Plug. . . . . $5

Magpul MIAD Grip KitDrop-in replacement with removable front andback straps, inner storage and integral enhancedtrigger guard. Black or OD Green. . . . $44

Spade Grip Kit

Includes complete stockwith buffer tube and spring . . . . . $445Picatinny Rail Adapter for mountingAR15 on MG42 AA Tripod . . . . . . . . $65

PSG1 StyleWoodGrip$45

Fax: 903-546-6346 www.model1sales.com Page 51

Standard HandguardTwo piece, with heatshield, black. . . . $20Two piece, with heatshield, green . . . $25

C.A.R.HandguardTwo piece, with heatshield, black. . . . $15Two piece, with heatshield, green . . . $20

M-4HandguardTwo piece, with heatshield, black. . . . $25Two piece, with heatshield, green . . . $30

TriangleHandguardsTwo piece, with heatshield, black.C.A.R. length . . . . . . . . . . . . . . . . . . . $35Standard length, G.I. . . . . . . . . . . . . . $30

Aluminum Free Float TubesAvailable Knurled, Fluted or Fluted/Knurled

Add $5 for vented (Pistol or C.A.R. only)Pistol length . . . . . . . . . . . . . . . . . . . . $45C.A.R. length . . . . . . . . . . . . . . . . . . . $45Standard length . . . . . . . . . . . . . . . . . $45

Standard Free Float SleeveOCMP legal, with gas tube . . . . . . . $110

Standard Rifle Length HandguardBlack . . . . . . . . $20 / Green . . . . . . . . $25

YHM Smooth Free Float HandguardFull length top rail and three 2.5” front rails.

C.A.R. length . . . . . . . . . . . . . . . . . . $140Standard length . . . . . . . . . . . . . . . . $160

YHM Screw-In End CapsFor YHM Free Float Handguards.Available with 15/16” or 1 1/16”inside diameter . . . . . . . . . . $18

YHM Free Float 4 Rail HandguardsPistol length . . . . . . . . . . . . . . . . . . . $100C.A.R. length . . . . . . . . . . . . . . . . . . $120Standard length . . . . . . . . . . . . . . . . $160

YHM 2 Piece Four Rail HandguardC.A.R. length . . . . . . . . . . . . . . . . . $147Standard length . . . . . . . . . . . . . . . . $190

Slim Line 2 Piece 4 Rail HandguardC.A.R. length . . . . . . . . . . . . . . . . . . $139

ArmaLite 2 Piece 4 Rail HandguardC.A.R. length, with covers . . . . . . . . $150

Page 52 MODEL "1" SALES Tel: 903-546-2087

Predator Tactical RailP-4 C.A.R. length . . . . . . . . . . . . . . $229P-9 Mid Length. . . . . . . . . . . . . . . . $249P-12 Standard Length . . . . . . . . . . $269

Midwest IndustriesModular RailHandguardC.A.R. length . . . . . . . . . . . . . . . . . . $281High Rise Rail Attachment. . . . . . . . . $16 Samson Four Rail Handguard

C.A.R. length . . . . . . . . . . . . . . . . . . $259Rifle length . . . . . . . . . . . . . . . . . . . . $310

Samson CX 4 Rail HandguardC.A.R. length, extended . . . . . . . . . . $310

Midwest Industries

Two Piece Four Rail HandguardMCTAR17 - Carbine length . . . . . . $155MCTAR19 - Standard length . . . . . $199

Viking TacticsModular Handguards

C.A.R. length . . . . . . . . . . . . . . . . . . $149Standard length . . . . . . . . . . . . . . . . $149

Midwest Industries

Extended Carbine LengthMil-Std rails, T-marked, 6061 hard coatanodized, monolithic look upper rail.MCTAR17X - Two Piece . . . . . . . . . $175MCTAR20X - Free Float . . . . . . . . . $220

Midwest Industries

Two Piece Free Float ForearmMil-Std rails, T-marked, 6061 hard coatanodized, monolithic look upper rail.MCTAR23 - Pistol length. . . . . . . . . $160MCTAR20 - Carbine length. . . . . . . $180MCTAR22 - Full length . . . . . . . . . . $250

Young ManufacturingQuad Rail Vented HandguardsPistol length . . . . . . . . . . . . . . . . . . . . $85C.A.R. length . . . . . . . . . . . . . . . . . . $135Standard length . . . . . . . . . . . . . . . . $165

GG&GTacticalForearmC.A.R. length, non-free float . . . . . . $215C.A.R. length, free float . . . . . . . . . . $215

Fax: 903-546-6346 www.model1sales.com Page 53

TacticalForward GripBlack or OD Green$20

AluminumTactical Forward

Grip . . . $45

SOGVertical GripGraphite withovermolded checkered grip,metal lock down post, in Black,OD Green and Coyote Tan . . . $40

Pistol Grip RailMount AdapterAdapts pistol gripfor rail mounting . . . $31

Ladder StyleRail CoversIn Black orOD GreenShort. . . . . . . . . . . . . . . . . . . . . . . . . . . $4Long . . . . . . . . . . . . . . . . . . . . . . . . . . $12

Clip-On Rail CoversIn Black or OD GreenShort - Covers5 slots . . . $4MediumCovers 10 slots . . . . . . . . . . . . . . . . . . . . . . $8Long (pictured) - Covers 15 slots . . . . . $12

YHMFolding Forward

Grip . . . $46

ERGO VerticalForwardGrip . . . $60

YHM PistolForward Grip

$41

ErgonomicForward GripBlack,Tan orOD Green$35

YHM FoldingForward Grip

Push Button. . . $74

Forward Grips

ERGOUniversal Mounting Platforms6 Inch Aluminum RailWith 2 mounting holes and 1 slot, includesmounting hardware and rail cover . . . . . $282 Inch Aluminum RailWith 2 mounting holes, includesmounting hardware and rail cover . . . . . $15

ERGO 6-4-2 Polymer Rail6 inch with 3 mounting holes and 1 slot, useas 6" or cut into 2" and 4", includesmounting hardware . . . . . . . . . . . . . . . . $10

MidwestIndustries

HandguardRail Mounts

Hardcoat anodized 6061 aluminumShort. . . . . . . . . . . . . . . . . . . . . . . . . . $14Long . . . . . . . . . . . . . . . . . . . . . . . . . . $19

ERGORail MountDetachable SlingSwivel . . . . . . . . . $20

Page 54 MODEL "1" SALES Tel: 903-546-2087

Tactical RailSwivel Stud orBipod Mount . . $35

YHM DovetailAngle Mount

$15

YHM 1/2 InchRiser MountMounts to picatinny rail. . . . . . . . . . . $33

YHM Rail Extensions5 Inch Rail Extension . . . . . . . . . . . . . $416 Inch Rail Extension . . . . . . . . . . . . . $49

SOG GraphiteFront SightRail AdapterAttaches to frontsight housing . $27

SOG FlashlightRail Mount $34

SOG FlashlightRail Mount $29

One Piece Scope MountBuilt-in rings, 1" or 30mm . . . . . . $78.50

A2Mount . . . . . . . . . . . . . . . . . . . . . . . $8

UltraluxA2 Mount . . . . . . . . . . . . . . . . . . $22

Rock River Arms Riser BaseSee-Thru. . . . . . . . . . . . . . . . . . . . . . . $55 Co-Witness Mount . . . . . . . $70

ProMagColt Delta Style Mount . . $25

Young Accessory Rail8 inch length. . . . . . . . . . . . . . . . . . . . $3510 inch length. . . . . . . . . . . . . . . . . . . $37

GG&G ETI UFIRUnder Foregrip Integrated Rail

Installs in AR handguard lower vent holes.#1120 . . . . . . . . . . . . . . . . . . . . . . . . . $35

Fax: 903-546-6346 www.model1sales.com Page 55

BaseAD-17 $109

AD-RECON-SStraight Mount30mm $1691 Inch $169

AD-RECONExtends scope2 inches.30mm . . . . . . . . . . . . . . . . . . . . . . . . $1891 Inch . . . . . . . . . . . . . . . . . . . . . . . . $189

AD-RECON-X Extends scope 3 inches.30mm . . . . . . . . . . . . . . . . . . . . . . . . $1991 Inch . . . . . . . . . . . . . . . . . . . . . . . . $199

American DefenseScope Mounts

American DefenseAimpoint Mounts

LowAD-68L$109

StandardAD-68 $109High

AD-68H$109

CantileverAD-68C $139

Midwest IndustriesStandardAimpoint RingHardcoat anodized 6061 alu-minum billet, co-witness com-patible for rear mountedback-up sight . . . . . . . $143

Midwest IndustriesCantileverAimpointRing

Hardcoat anodized 6061 aluminum billet,height compatible with rear mounted nightvision monocular. . . . . . . . . . . . . . . . . $194

1 InchRingsSet of two$55

GG&G AccucamQuick Detach Base

with Integral30mmRings

#1198 . $195

GG&G AccucamQuick DetachStandard Rail

#1197 . . $155

Leather SlingBlack . . . . . . . $25

Leather SlingTan . . . . . . . . . . $25

Leather SlingNatural . . . . . $25

Tactical WebSling $24

Single Point SlingIncludes CAR Stock Tactical Plate,in Black, OD Green or Tan . . . $59

Web Sling$5

SWATSling . . . $28

Complete SWAT Sling System With Sling, PushButton Pivot Pin with Stud and CAR StockAdapter Plate . . . . . . . . . . . . . . . . . . . . . . . $58

SmartreloaderElectronicEarmuffs SR875$55

Page 56 MODEL "1" SALES Tel: 903-546-2087

Rail MountFront SlingAdapter . . . . . . . . $33

Rail MountQD Front SlingAdapter . . . . . . . . $33

Rail Mount Heavy DutyQD Front Sling Adapter . . . . $39

QD RearSling Adapterfor M-4 6-position buttstock . . . . . . . . $40

QD RearSling Adapterfor CAR 4-position buttstock . . . . . . . . $40

CAR/M4Stock EndPlate Adapters Slot . . . . . . . . $36 / Loop . . . . . . . . . . $35

Sling AdapterStud . . . . . . . . . . . . $23

Midwest Industries Sling Adapters

Heavy Duty QDRear Sling Mountfor CAR/M4 buttstock . . . . . . . . $59Empty Chamber Flag $1.00

KNS FrontSling MountAttaches through vent holeof standard handguards . . . $14.00

KNS Rear Sling MountReplaces rear sling loop . . . . $14.00

Fax: 903-546-6346 www.model1sales.com Page 57

CAR Stock Tactical Plates

Ambi - 1001. . . $14

Left Hand Shooter1004L . . . . . . . . . $14

Right hand shooter1004R . . . . . . . . . $14

Left Hand Shooter1005L . . . . . . . . . $14

Right hand shooter1005R . . . . . . . . . $14

Ambi - 1004. . . $14

Right hand shooter1002R. . . . . . . . . . . $14

WookBrass Catcherfor A3 flattop . . . . . . $35

.22LR BrassCatcher forCarry Handle$12

BrassCatcher

for A2 Upper$15

Brass CatcherFor A3 flattop, with zip-pered mesh bag . . . $20

AR Brass DeflectorsFor A3 Flattop. . . . $21For Removable Carry Handle . . . . . . . . . . $21

For A2 Carry Handle . . . . . $21

Harris BipodsSeries SSwivel ModelBRM . . . . . . $85LM . . . . . . . $8525C . . . . . . $95Adapter . . . $12

PolymerBipod $11

Jard Rail Mount BipodPicatinny rail mount, three sections, 13”closed, 27” open . . . . . . . . . . . . . . . $135

Versa-PodBipod $65

Versa-PodRailAdapter $35

GRSC A2 StockSingle Point SlingAdapter . . . $35.50

AR15 5 RoundMag Loader.223 caliber . $14.50

.223 Repack KitIncludes bandoleer,charger/loader, 12strippers and 4 card-boards. . . . . . . . . $6

AR15 Stripper ClipMag LoaderAllows AR mags to use pre-loaded stripper clips, also workswith individual rounds, injectionmolded polymer. . . . . . $13.50

Page 58 MODEL "1" SALES Tel: 903-546-2087

30 Round Mag Rebuild Kit1 spring, 1 floorplate, 1 follower . . $4.50

Green MagFollower . . . . . . $1.25

MagPulFollowersSelf Leveler3 Pack . . . $6.50

ProMag 9mm 32 Round Mag. . $22

Steel 9mm 32 Round Mag . . . . $40

30 Round ARMag SpringsPack of Three . . . . . . . . . . . . . . . . . . . . $9

Rubber MagPulFor .223 caliber magsPack of 3 . . . . . . . . . . . . $9

C-MAG100 Round DrumC-MAG 100 round drum magazine withclear cover, personal loader, black pouch,manual, screwdriver and tube of graphite..223/5.56mm C-MAG Drum . . . . $2759mm C-MAG Drum. . . . . . . . . . . $328

PRI 6.8 SPC Mags6.8 Rem SPC 10 Round . . . $436.8 Rem SPC 15 Round . . . $436.8 Rem SPC 25 Round . . . $46

Magpul PMAGLightweight polymer 5.56mmmags with pop-off dust cover,stainless steel spring and anti-tiltfollower. In Black or OD Green.30 Round PMAG . . . . . $1620 Round PMAG . . . . . $15

.223 MagProtectorEach . . . $2Pack of 3 . . . $5

ProMag 30 Round 5.56 MagBlack synthetic . . . . . . . . . . . . . . . . . . $19

ProMag Mags5.56/.223 5 Round Flush . . . . . $165.56/.223 5 Round Full Body . . $205.56/.223 10 Round Full Body . $205.56/.223 20 Round . . . . . . . . $20

5.56/.223 10 Round magazine blockedin 30 round magazine body. . . . . . . . . . . . $20.300 Fireball 10 Round . . . . . . . . . . . . $20

C-Products Mags7.62x39mm 5 Round. . . . . . . $207.62x39mm 10 Round . . . . . $257.62x39mm 30 Round . . . . . $285.45x39mm 25 Round . . . . . $18

6.5 Sporter 10 Round . . . . . . . . . . . . . . $196.5 Sporter 25 Round . . . . . . . . . . . . . . $196.8 Rem SPC 25 Round. . . . . . . . . . . . . $19

.223/5.56 CaliberG.I. Magazines10 Round Flush. . $1520 Round . . . . . . . $1530 Round . . . . . . . . . . . . . . . $15

Fax: 903-546-6346 www.model1sales.com Page 59

G.I. BarrelWrench

$10

Barrel Wrench . . . . . . . . . . . . . . $33

Armorers Wrench . . . . . . . . . $34

PunchSet . . . $15

C.A.R.Stock Wrench . . . $5

Armorers C.A.R.Stock Wrench . . . . . . . . $15

Barrel InstallationAlignment Tool . . . . . . . . . . . . . $76

Barrel ExtensionWrench . . . . . . $85

Bore Light . . . . . . . . . . . . . . . . $5

Order Both and SaveLower Receiver Action Blockand Armorer's Action Block . . $45

LowerReceiver

ActionBlock

$15

Armorer'sAction Block

With T-Handle . . . $35

AluminumVice Jaws$15

HandguardRemoval Tool Synthetic . . . . . . . $24

HandguardRemoval ToolMetal with synthetic contact points . $15

Pivot PinDetent Installation Tool . . . . . $5

Pivot Pin DetentRemoval Tool . . . . . . . . . . . . . $5

A1/A2 ComboSight Tool . . $10

Bore Guide Cleaning Tool . . $25

AR BoltTool . . . . $35

Buttstock Weight. . . . . . . . . . . . $20Handguard Weight . . . . . . . . . . $25

Page 60 MODEL "1" SALES Tel: 903-546-2087

BoltCarrierCarbon Removal Tool . . . . . . $20

Lee Reloading Die Set6.8mm RemSPC$25

Broken Shell Extractors.223 Caliber . . . . . . . . . . . . . . . . . . . $87.62x39mm. . . . . . . . . . . . . . . . . . . . $8

AR Field Repair Kit . . . . . . . . . . $25

Borebrush, G.I. . . . . . . . . . . . . . . . $1

Chamber Brush . . . . . . . . . . . . . . $2

Gas Tube Cleaner Pack of 20 . . . $5

Gas Tube Cleaner Pack of 50 . . . $9

.223 Cleaning Patches1,000 for . . . . . . . . . . . . . . . . . . . . . . . $4.75

Buttstock Cleaning Kit . . . . . $12

Belt Cleaning Kit . . . . . . . . . . . . $15

Timney TriggerTension Scale . . . . . . . . . . . . . $29

5.56mm M4/M16 Soft Pack Cleaning KitSoft Pack Case with Alice Clips, NATO Adapter, Obstruction Remover, BoreReflector, C.L.P., Slotted Tip, Gas Port Pick, Cotton Swabs, Female Rod Handle,Male Rod Handle, 5.56 Bore Brush, .35 Cal Bore Brush, Nylon End Brush, 5.56Patches, 30" Memory Flex Rod, 8" Memory Flex Rod, Short AP Brush, BrassScraper,T-Handle, 1/2 oz Lens Cleaner, Lens Cloth, Mohair Lens Brush . . $118

MEUSOC .45 Cal Soft Pack Cleaning KitSoft Pack Case with Alice Clips, Nylon End Brush, Pin Punch, NATO Adapter, Bore Reflector,Panoply Patches, 1/2 oz C.L.P., 8" Memory Flex Cable, Female Rod Handle,T-Handle Base, SlottedTip, Brass Scraper, .45 Cal Nylon Brush, .45 Cal Bronze Brush, Short AP Brush, Gas Port Pick, 8"Cable with .30 Cal Tip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $84

9mm Pistol Military Issue Soft Pack Cleaning KitSoft Pack Case with Alice Clips, Mini Nylon End Brush, NATO Adapter, 9mm Nylon Bore Brush, 9mmBrass Bore Brush, C.L.P. Break Free, 8" Memory Flex Cleaning Rod, 8" Memory Flex with 9mm Tip,Panoply Patches, Female Rod Handle, Pistol T-Handle Base, Slotted Brass 9mm Tip, Short ReceiverBrush, Brass Pick, Pin Punch, Brass Scraper, Bore Reflector . . . . . . . . . . . . . . . . . . . . . . . . . . $84

5.56mm M4/M16 Buttstock Cleaning KitIncludes 1/2 oz Solvent, 30" Memory Flex CleaningRod, Bore Reflector,T-Handle, NATO Adapter,Pipe Cleaners, Bore Brush, 2" Patches, Slotted Tip,Chamber Rod, Double End A/P Brush, Obstruction Remover . . . . . . . . . . . . . . . . . . . . . . . . $46

Otis Cleaning Kits

AR Chamber Maid Star Kit $12.50Cleans barrel extension and lug recess, withFlex cleaning rod, handle and five cleaning stars.

ReplacementCleaning StarsPer pack of twenty . . . . . $9.95

MILITEC-1Firearm Lube & Protectant

Synthetic weaponslubricant, lubricateswith a dry syntheticmolecular bond.

16 ounce . . $364 ounce . . . $171 ounce . . . . $71/2 ounce. . . $5

Fax: 903-546-6346 www.model1sales.com Page 61

Deluxe AR15/M16Lug Recess Cleaning Kit

Includes chamber cleaning rod, lug recesscleaning head, Delrin sleeve, 50 cottoncleaning rolls, chamber brush, chambermop and double ended nylon cleaningbrush . . . . . . . . . . . . . . . . . . . . . . . . . $27

One Piece Cleaning Rod.22 cal rod with ball bearing handle, nyloncoated, .22 cal jag included.24" Cleaning Rod . . . . . . . . . . . . . . . . $2436" Cleaning Rod . . . . . . . . . . . . . . . . $26

.50 CaliberChamber Cleaning Rod

Featuring a fixed handle with a 17" solidbrass shaft . . . . . . . . . . . . . . . . . . . . . $19

AR15 .223 CaliberChamber Cleaning Rod

Fixed handle with 9.5" solid brass shaft,includes chamber cleaning brush. . . . $13

Breech Rod GuideGuides cleaning rod straight into barrel,with O-ring seal that prevents oil/debrisfrom running back into action..223 Cal AR15/M16 . . . . . . . . . . . . . . $20.308 Cal AR10 . . . . . . . . . . . . . . . . . . $23

DelrinMuzzle GuideProtects muzzle endwhile guiding cleaning

rod straight into barrel. AR15/M16 withflashider . . . . . . . . . . . . . . . . . . . . . . $6.50

AR15/M16 Cleaning RodConversion Kit

Converts 8/32female cleaningrod into bolt lugrecess cleaningtool. Kit includeslug recess clean-

ing head, Delrin sleeve and 50 cottoncleaning rolls . . . . . . . . . . . . . . . . . . . $12

Double Ended Nylon Brush$2.00

.50 CaliberNo-Harm Bronze Brush

With brass core . . . . . . . . . . . . . . . $1.85

.30 CaliberNo-Harm Bronze Brush

With brass core . . . . . . . . . . . . . . . $1.85

.22 CaliberNo-Harm Bronze Brush

With brass core . . . . . . . . . . . . . . . $1.85

AR15/M16 Chamber Brush8/32 thread . . . . . . . . . . . . . . . . . . . $3.758/36 thread, USGI . . . . . . . . . . . . . . $2.00

Page 62 MODEL "1" SALES Tel: 903-546-2087

AimpointComp ML2 & M2

The Comp ML2 is currently in use by SpecialForces and elite police units around the world.Primarily designed for use in daylight and low-light conditions, the Comp ML2 can also beused by hunters and sport shooters whodemand the best in the field.The Comp M2 isnight vision compatibile.Comp ML2 - #10338 . . . . . . . . . . $435Comp ML2 - 2X - #10583. . . . . . $565Comp M2 - #10336. . . . . . . . . . . . $475

Aimpoint 3XMag Magnifying ModuleThe Aimpoint 3XMag is specially designed for compatibili-ty with Aimpoint sights and to provide the user with max-imum flexibility and increased performance in the field.3XMAG - #11324. . . . . . . . . . . . . . . . . . . . . . $524

AimpointComp ML3 & M3

Primarily for use in daylight and in low light con-ditions for LE and military applications, theComp ML3 is the perfect choice for profession-als, hunters and sport shooters who want anextremely tough and reliable sight.The CompM3is night vision compatibile. Both include areplaceable, protective black rubber cover.Comp ML3 - #11416 . . . . . . . . . . $485Comp M3 - 2 MOA - #11408 . . . $535Comp M3 - 4 MOA - #11403 . . . $535

AimpointComp M4 & M4SThe Comp M4 and M4S are optimized for usewith all generations of night vision devices, withseven NVD-compatible brightness settings andnine Daylight settings including extra-bright.Comp M4 - #11972. . . . . . . . . . . . $702Comp M4S - #12172 . . . . . . . . . . $702

AimpointMicro H-1 & T-1The Micro H-1 is small and light enough to beused on any type of firearm or archery equip-ment. On a bow, the parallax-free Micro H-1eliminates the need for a peep, allowing you toshoot accurately in lower light. The Micro T-1has six NVD-compatible brightness settings andseven daylight settings including extra-bright.Micro H-1 - #11910. . . . . . . . . . . . $522Micro T-1 - #11830 . . . . . . . . . . . . $585

Fax: 903-546-6346 www.model1sales.com Page 63

HOLOgraphicWeapon SightThe EOTech uses state-of-the-art digitalelectronics design. Twenty brightness levelsensure proper brightness control in eitherlow light or very bright sunlight. An on-board microprocessor provides automaticbattery check indicator, up/down brightnessscrolling and programmable auto shutdownfeatures.All electronics are fully encapsulat-ed in shock absorbing resin compound.

The holographic patterns have been designed to be instantly visible in any light, instinctive to cen-ter regardless of shooting angle, and to remain in view while sweeping the engagement zone.Reticles are designed as large, see-through patterns to achieve lightning quick reticle to targetacquisition without covering or obscuring the point of aim.

SPECIFICATIONS Specifications are subject to change

OPTICS. . . . . . . . . . . . . . . HOLOgraphic - 100% parallax-free; Class II laser (eye safe viewing)DIMENSIONS . . . . . . . . . . . . . . . . . 4" x 1.5" x 2.25" / Weight: 6.6 oz / Window 1.20” x 0.85”AUTO SHUT-DOWN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 hours SEALING / COATING. . . . . . . . . . . . . Waterproof and Fogproof / Scratch resistant, anti-glareTEMPERATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20F to 150F (operating)/40FBRIGHTNESS SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 settings with scrolling featureMAGNIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1X - unlimited eye reliefINTERNAL MICRO-WINDAGE, in sight . . . . . . . . . . . . . . . . . . . . . . . . . . . . +/- 35" at 100 ydsWINDAGE ADJUSTMENT, in sight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 MOAELEVATION ADJUSTMENT, in mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240" at 100 yardsCOARSE WINDAGE ADJUSTMENT, in mount . . . . . . . . . . . . . . . . . . . . . . 1,200" at 100 yardsAUTO BATTERY CHECK INDICATOR. . . . . . . . . . . . . . . . . . . . Flashing reticle upon start-upBATTERIES - Model 511. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two Type N-alkalineBATTERIES - Model 512 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two AA Alkaline or LithiumBATTERIES - Model 552 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two AA Alkaline or LithiumBATTERIES - Model 553 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LithiumBATTERIES - Model 557 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two AA AlkalineBATTERY LIFE - Model 511 . . . . . . . . . . . . . . . . . . . . . . 70 hours continuous (nominal setting)BATTERY LIFE - Model 552/Alkaline . . . . . . . . . . . . . . 300 hours continuous (nominal setting)BATTERY LIFE - Model 552/Lithium. . . . . . . . . . . . . . . 500 hours continuous (nominal setting)

EOTech 511 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $360EOTech 512 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $400EOTech 552 - Night Vision Compatible . . . . . . . . . . . . . . . . . . . . . . . $480EOTech 553 - Night Vision Compatible in Black or Dark Earth . . . . . $640EOTech 557 - Night Vision Compatible with .223 Ballistic Reticle . . . $530EOTech 3X Magnifier with FTS Flip To Side Mount . . . . . . . . . . . . . . . $500EOTech 4X Magnifier with FTS Flip To Side Mount . . . . . . . . . . . . . . . $800Fabric Protective Cover For EOTech 511, 512 and 552 . . . . . . . . . . . . $16

Page 64 MODEL "1" SALES Tel: 903-546-2087

Each DuraCoat® CamoPak includes 8 or 10 ounces ofDuraCoat® and 1 ounce of Hardener, enough to create the camouflagepattern on 1 to 2 firearms. DuraCoat® CamoPaks are also availablepackaged with easy-to-use pre-cut adhesive backed Peel ‘N SprayTemplate™ and DuraCoat® Instructional DVD.

Each DuraCoat® EZ Camo Kit includes a DuraCoat®

CamoPak with 8 or 10 ounces of DuraCoat®, enough for 1 to 2firearms, 1 oz of Hardener, 4 oz Reducer, 16 oz Aerosol TruStrip,Peel 'N Spray™ Template, airbrush with air hose and couplings,15 oz. airbrush propellant with valve, color bottle with adapter,color bottle with cap and DuraCoat® Instructional DVD.

Each of the 26 unique camouflage patterns shown on the following pages areavailable in a DuraCoat® CamoPak and a DuraCoat® EZ Camo Kit.

The DuraCoat® System is the very latest in firearm finishing technology. No othercommercially manufactured and packaged firearm finishing system offers the ver-satility, durability and user friendly characteristics of DuraCoat®. DuraCoat® canbe applied to ferrous metals, alloys, stainless steel, synthetics, wood, etc. No pre-heating or baking is required. DuraCoat® can be applied with airbrush, HVLP spraygun or conventional spray gun. Note: Pink Lady requires a base coat of White.

THE FINEST FIREARM FINISH ON THE PLANET!

Afghan4 oz Desert Beige, 2 oz Desert Mint,2 oz Desert Brown, 1 oz Hardener

Afghan CamoPak™ . . . . . $34.95 / With Peel 'N Spray Template and DVD. . . $74.95Afghan EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

DuraCoat® EZ Finishing Kit Includes: Airbrush withair hose and couplings, 9 oz airbrush propellant with valve, colorbottle with adapter, color bottle with cap, 4 oz DuraCoat® color ofyour choice, 1 oz Hardener, 2 oz Reducer, 6 oz Aerosol TruStripand DuraCoat® Instructional DVD . . . . . . . . . . . . . . . . $49.95

Matte Black Desert Brown OD Green Sniper Green White Pink Lady

TacticalUltra Flat Black

TacticalOD Green

TacticalCoyote Brown

SemiglossBlack (HK)

Magpul FlatDark Earth

Gun Blue

DuraCoat® 4 Oz. Finishes 2 to 4 firearms . . $16.95DuraCoat® Clear 4 Oz. . . . . . . . . . . . . . . . . $24.95

Fax: 903-546-6346 www.model1sales.com Page 65

THE FINEST FIREARM FINISH ON THE PLANET!

Desert Storm2 oz Desert Mint, 2 oz Desert Brown,2 oz Desert Beige, 2 oz White, 2 oz Matte Black, 1 oz HardenerDesert Storm CamoPak™ . . $41.95 / With Peel 'N Spray Template and DVD . . $81.95Desert Storm EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $109.95

Belgian2 oz Belgian Brown, 2 oz Jungle Green,2 oz Gold Coast, 2 oz White,2 oz Matte Black, 1 oz HardenerBelgian CamoPak™ . . . . $41.95 / With Peel 'N Spray Template and DVD . . . . $81.95Belgian EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $109.95

Vietnam Tiger Stripe2 oz Tiger Stripe Brown, 2 oz Tiger Stripe Green,2 oz Woodland Tan, 2 oz Matte Black, 1 oz HardenerVietnam Tiger Stripe CamoPak™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95Vietnam Tiger Stripe CamoPak™ with Peel 'N Spray Template and DVD. . . . . $74.95Vietnam Tiger Stripe EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

Advanced Tiger Stripe2 oz Matte Black, 2 oz Cooler Green,2 oz Advanced Tiger Stripe Brown, 2 oz Woodland Tan, 1 oz HardenerAdvanced Tiger Stripe CamoPak™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95Advanced Tiger Stripe CamoPak™ with Peel 'N Spray Template and DVD . . . $98.75Advanced Tiger Stripe EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.95

Urban4 oz Matte Black, 2 oz Snow Gray,2 oz White, 1 oz HardenerUrban CamoPak™ . . . . . $34.95 / With Peel 'N Spray Template and DVD. . . . $74.95Urban EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

SA58™ Rifles provided by DSA, Inc. / www.dsarms.com

Page 66 MODEL "1" SALES Tel: 903-546-2087

THE FINEST FIREARM FINISH ON THE PLANET!

AmStripe™

4 oz Tiger Stripe Green,4 oz Matte Black, 1 oz HardenerAmStripe CamoPak™ . . . $34.95 / With Peel 'N Spray Template and DVD . . . $74.95AmStripe EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

Advanced AmStripe™

4 oz Matte Black, 2 oz Woodland Green,2 oz Woodland Tan, 1 oz HardenerAdvanced AmStripe CamoPak™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95Advanced AmStripe CamoPak™ with Peel 'N Spray Template and DVD . . . . . $98.75Advanced AmStripe EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.95

Lady AmStripe™

4 oz Matte Black, 2 oz White,2 oz Pink Lady, 1 oz HardenerLady AmStripe CamoPak™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95Lady AmStripe CamoPak™ with Peel 'N Spray Template and DVD. . . . . . . . . . $98.75Lady AmStripe EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.95

Bengal4 oz Matte Black, 2 oz Bengal Brown,2 oz White, 1 oz HardenerBengal CamoPak™ . . . . $34.95 / With Peel 'N Spray Template and DVD . . . . $74.95Bengal EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

Marsh2 oz Marsh, 2 oz Woodland Green,2 oz SOCOM, 2 oz UnderBrush, 1 oz HardenerMarsh CamoPak™ . . . . . $34.95 / With Peel 'N Spray Template and DVD . . . . $74.95Marsh EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

SA58™ Rifles provided by DSA, Inc. / www.dsarms.com

Fax: 903-546-6346 www.model1sales.com Page 67

THE FINEST FIREARM FINISH ON THE PLANET!

UnderBrush™2 oz Woodland Green, 2 oz Woodland Brown,2 oz Snow Gray, 2 oz UnderBrush, 1 oz HardenerUnderBrush CamoPak™ . . $34.95 / With Peel 'N Spray Template and DVD . . $74.95UnderBrush EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

WinterTwig™

2 oz Woodland Tan, 2 oz Woodland Brown,2 oz Snow Gray, 2 oz White, 1 oz HardenerWinterTwig CamoPak™ . . $34.95 / With Peel 'N Spray Template and DVD. . $74.95WinterTwig EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

Woodland Prestige2 oz Woodland Tan, 2 oz Woodland Green,2 oz Woodland Brown, 2 oz Matte Black,1 oz HardenerWoodland Prestige CamoPak™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95Woodland Prestige CamoPak™ with Peel 'N Spray Template and DVD . . . . . . $74.95Woodland Prestige EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

Woodland Signature2 oz Woodland Tan, 2 oz Woodland Green,2 oz Woodland Brown, 2 oz Matte Black, 1 oz HardenerWoodland Signature CamoPak™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95Woodland Signature CamoPak™ with Peel 'N Spray Template and DVD . . . . . $74.95Woodland Signature EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

Signature Snow4 oz Snow Gray, 4 oz White, 1 oz HardenerSignature Snow CamoPak™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95Signature Snow CamoPak™ with Peel 'N Spray Template and DVD . . . . . . . . . $74.95Signature Snow EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

SA58™ Rifles provided by DSA, Inc. / www.dsarms.com

Page 68 MODEL "1" SALES Tel: 903-546-2087

THE FINEST FIREARM FINISH ON THE PLANET!

Wilderness MirageFlage™2 oz Matte Black, 2 oz WM Brown,2 oz Woodland Green, 2 oz Woodland Tan,1 oz HardenerWilderness MirageFlage CamoPak™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95Wilderness MirageFlage CamoPak™ with Peel 'N Spray Template and DVD . . $98.75Wilderness MirageFlage EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.95

Desert MirageFlage™2 oz Desert Mirage Tan, 2 oz DM Lizard,2 oz DM Sand, 2 oz DM Brown, 1 oz HardenerDesert MirageFlage CamoPak™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95Desert MirageFlage CamoPak™ with Peel 'N Spray Template and DVD . . . . . $98.75Desert MirageFlage EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.95

Urban MirageFlage™4 oz Matte Black, 2 oz Snow Gray,2 oz Urban Mirage White, 1 oz HardenerUrban MirageFlage CamoPak™ . . . . . . . . $34.95Urban MirageFlage CamoPak™ with Peel 'N Spray Template and DVD . . . . . . $98.75Urban MirageFlage EZ Camo Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.95

ACU4 oz Deep Gray Green, 2 oz ACU Light Tan,2 oz Gray Green, 1 oz HardenerACU CamoPak™ . . . . $34.95 / With Peel 'N Spray Template and DVD. . . . . . $98.75ACU EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.95

CADPAT2 oz Matte Black, 2 oz CADPAT Brown,2 oz CADPAT Dark Green,2 oz CADPAT Light Green, 1 oz HardenerCADPAT CamoPak™ . . . $34.95 / With Peel 'N Spray Template and DVD . . . $98.75CADPAT EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.95

SA58™ Rifles provided by DSA, Inc. / www.dsarms.com

Fax: 903-546-6346 www.model1sales.com Page 69

MultiColor2 oz Multi Light Green, 2 oz Multi Dark Green,2 oz Multi Light Brown, 2 oz Multi Beige,2 oz Multi Dark Brown, 2 oz Multi Medium Green, 2 oz HardenerMultiColor CamoPak™ . . $52.95 / With Peel 'N Spray Template and DVD . . $115.95MultiColor EZ Camo Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $145.95

Diamond Plate4 oz Diamond Plate Gray, 2 oz Diamond Plate Silver,2 oz Diamond Plate Deep Gray, 1 oz HardenerDiamond Plate CamoPak™ . . . . . . . . . . . . . . $34.95Diamond Plate CamoPak™ with Peel 'N Spray Template and DVD . . . . . . . . . . $74.95Diamond Plate EZ Camo Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95Top coat of DuraCoat® Clear required - DuraCoat® Clear 2 oz . . . . . . . . . . . . . . . . $15.95

Diamond Plate Stealth4 oz SOCOM, 2 oz Semigloss Black (HK),2 oz Stealth Gray, 1 oz HardenerDiamond Plate Stealth CamoPak™ . . . . . . $34.95Diamond Plate Stealth CamoPak™ with Peel 'N Spray Template and DVD . . . $74.95Diamond Plate Stealth EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95

Bloomberg Collection

In July of 2006, Mayor Bloomberg took it uponhimself to ban DuraCoat® from the streets ofNew York City. The Bloomberg Collection wascreated in honor of his interest in DuraCoat®: 4 oz Brick, 4 oz Mortar, 1 oz Manhattan Red,1 oz Bronx Rose, 1 oz Brooklyn Blue, 1 oz Queens Green, 1 oz Staten Island Orange, 1 oz HardenerBloomberg Collection EZ Camo Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.95Base coat of DuraCoat® White required - DuraCoat® White 4 oz . . . . . . . . . . . . . . $16.95

Flame2 oz White, 1 oz Cherry, 2 oz O’ Sherbert,2 oz Wild Yellow, 1 oz Cobalt Blue, 1 oz HardenerFlame CamoPak™. . . . . . . . . . . . . . . . . . . $34.95With Peel 'N Spray Template & DVD . . . . $74.95Flame EZ Camo Kit. . . . . . . . . . . . . . . . . . $99.95

Page 70 MODEL "1" SALES Tel: 903-546-2087

Heavy Duty Tactical Case . . . . $117Custom made in the U.S. for Model "1" Sales!Available in 40", 43" and 46". Made of water resistant bal-listic polyester with 1" open cell foam. Features a full lengthzippered compartment with ladder retention system tosecure and protect your firearm and a second full lengthzIppered compartment for accessory and mag storage.

Galati Tactical MatDrag Bag/Rifle Case

In Black, OD Green or Tan . . . . . $189.95Quick and easy transformation from 48” x 11 1/2”rifle case, backpack, drag bag and 66” x 37” shooting mat. Cordura nylon with over 1/2” closed cell foam paddingon each panel, heavy duty YKK dual slider zipper and clips, protective zipper flap, outside laces for tie-downcamo system, many accessory loops and four detachable accessory panels.

Galati XT Premium42 Inch Double Rifle Case

Black . . . . . . . . . . . . . . . . . . . . . . . $159.95Two compartments to carry two firearms with 4” supportrib, 3” zipper protector around perimeter of the case.Constructed of 1000D Cordura nylon with 1 1/8” closed cell foam padding on each side,YKK zippers with quickrelease buckle system, bonded threading and reinforced stitching. With detachable shoulder strap, wrap andcarry handles, velcro hook/loop accessory pocket, 2 pistol mag holders and 2 universal holsters. Case dimen-sion 42” x 12” x 4.25”, Pocket dimension 40” x 9” x 3”.

Galati XT Premium42 Inch Single Rifle Case

Black . . . . . . . . . . . . . . . . . . . . . . . . $74.95OD Green or Tan . . . . . . . . . . . . . . $79.95Featuring five mag pouches and accessory pouch, adjustablepadded shoulder strap, lockable D-ring, 3” support rib, dual YKK zippers and 1” padded zipper protector.Constructed from 1000D Cordura nylon with 1 1/8” closed cell foam padding, PVC tactical nylon liner, reinforcedstitching and bonded threading. Fits AR-15, Mini 14, HK91/93 and similar size weapons. Dimensions 42” x 12” x 2.5”.

M9 Bayonet & ScabbardBlack or Green, GI Contract, Lancay. $85

M11 EODKnife & Tool Pouch with ScabbardBlack or Green, tools not included . $125

M10 Scabbard Black. . . . . . . . $15

M8A1 Scabbard Green. . . . . $15M7 Bayonet & Scabbard

GI Contract . . . . . . . . . . . . . . . . . . . . $45

Fax: 903-546-6346 www.model1sales.com Page 71

Model "1" Logo T-ShirtMedium, Large, X-Large, XX-Large . . . . . . . . . . . $10 / XXX-Large. . . . . . . . . . $12

Model "1" LogoHooded Sweatshirt

$25

Colt M16A1 RifleArmorer/DepotMaintenance andRepair Manual . . . . $5Colt M16A2 Riflesand CarbinesArmorer/DepotMaintenance andRepair Manual . . . . . $8U.S. Marine CorpsTechnical ManualRifle, 5.56-MM, M16A2, W/E . . . . . . . . $7The M16/AR15 Rifle:A Shooter's and Collector’s Guide by Joe Poyer . . . . . . . . . . . . . . . . . . . . . . . $30The Complete Guide to AR15 Accuracy by Derrick Martin, Barret Tillman. $25The Competitive AR15 by Glen D. Zediker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $30Black Magic,The Ultra Accurate AR15 by John Feamster. . . . . . . . . . . . . . . $25

The AR15 Complete Owners Guide by Walt Kuleck with Scott Duff. . . . . . . $20The AR15 Complete Assembly Guide by Walt Kuleck with Clint McKee . . . $20The M14 Complete Assembly Guide by Walt Kuleck and Clint McKee . . . . . $25The M1 Garand Owners Guide by Scott A. Duff . . . . . . . . . . . . . . . . . . . . . . . $20The M1 Garand:World War II by Scott A. Duff. . . . . . . . . . . . . . . . . . . . . . . . . $35The M1 Garand: Post World War II by Scott A. Duff . . . . . . . . . . . . . . . . . . . $22Rock Island Rifle Model 1903 by C.S. Ferris . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23

P.O. Box 569 • Whitewright, TX 75491 • Tel: 903-546-2087 • Fax: 903-546-6346Master Card,Visa, AMEX or Discover accepted or send Certified Check or Money Order. Addapproximate shipping, extra will be refunded. Texas residents add 8.25% sales tax. Prices and spec-ifications subject to change without notice. All NFA rules apply, void where prohibited by law.

Secure Online Ordering: www.model1sales.com