Comparision with Conventional floor

Sr Description Conventional Floor FIBERMESH FLOOR Significance

1

2 Cover block Not required Saving in time and cost

3 Inspection

4 Conecrete pouring

5 Screed vibrator Same Same6 Troweling Same Same7 VDC (Varies) Same Same 8 Tensile strength 415-500 N/mm ^2 Min 1050 N/MM^2

9 Network 12mtrs per Mtr Square Min 360 Mtr per Square Meter

10 Reinforcment At Particular Level Throughout the section

11 Failure mode Brittle Ductile

Reinforcment Laying and tying

200-250 Kg per day with 2 Bar benders 2 Helpers ( 10 hrs) for lesser diameter else varies

One/Two person at the batching plant or at the mixer. Cutting bags and dosing

Saving in time and labour gives early handover and cost saving

1 no of 50 mm thick Required per sqmInspection required after reinforcement laying

No inspection required Dramix Fibers mix homogenously in concrete due to gluing technlogy

Work can be done with minimum supervision. Dramix fibers are engineered to suit your local needs

Truck mixer or bag mixer has to be loacted beyond the flooring area

Mixer can go to pouring site as there is no reinforcement

Saving in lead time as distance between mixer and actual site is reduced

Higher tensile strength higher crack control

More the netwrok better the performance

Throughout reinforcment gives excellent crack control and redistribution of loads

Better post carck behaviour better post crack strength Ftcm

Sheet1