COMPANY PROFILE · ELECTRIC MOTORS Up to 7,5 kW From 0,3 Up to 37 kW From 2,2 Up to 700 kW From 2,2 Up to 700 kW SPEED 750/950 rpm 50/300 rpm 1750/3500 rpm 1450/2900 rpm 1750/3500

COMPANYPROFILE

SETTINGINNOVATIVESTANDARDS

CONTENTS

GENERAL INFORMATION 4

FOREWORD 4

FINANCIAL INFORMATION 4

BANK REFERENCES 4

ADDRESS 4

GROUP CHART 6

ORGANIZATION CHART 7

PRODUCTION RANGE 8

PERFORMANCE RANGE 16

PLANT INFORMATION 17

LIFTING EQUIPMENTS 21

MACHINERY UNITS 21

TESTING EQUIPMENT 22

CONSTRUCTION MATERIALS 23

USER REFERENCE LIST 24

CERTIFICATIONS 29

CONTACTS 43

4

GENERAL INFORMATION

FOREWORDM Pumps Process (M Pumps Corp. in North America; M Pumps Asia Pacific Ltd. Pte in Singapore), established in 2017, is a fast-growing Company specialized in design and production of magnetic driven and mechanical seal pumps for chemical, petrochemical, pharmaceutical, natural gas and water industries, Off-shore and On-shore plants all over the world.

During the last two years, the investment have been aimed at the specific Oil & Gas field with the production of API 610 latest edition pumps, in several types according to the standard.

The employment of highly experienced professionals in key technical management positions is the proof of the Company’s commitment to continuous improvement.

Experienced management, quality, performance, availability of the huge stock and an accurate attention to the customer’s satisfaction differentiate M Pumps Process from its competitors. Our 4000 Sq. m. facilities are located in a site of a total area of 10000 Sq. m.

M Pumps Process mission is to provide high-quality products and services thanks to the experience gained on the market.

FINANCIAL INFORMATION VAT Nr.: 01539890291 Commercial Registration: Registered at R.E.A. CCIAA di Rovigo n. 138729 Paid up Capital: €110.000,00

BANK REFERENCES Bancadria: Taglio di Po Branch IBAN: IT05P0898263470023000001099 Swift Code: CCRTIT2T97A

ADDRESS HEAD OFFICE Via Milite Ignoto, 51 - 45019 - Taglio Di Po (Ro) - Italy

PLANT AND MECHANICAL WORKSHOP Via Dell’Artigianato, 120 – 45015 – Corbola (Ro) - Italy phone: +39/0426.346304 - fax: +39/0426.349126 e-mail: [email protected] - website: www.mpumps.it

State Highwaydirection: Adria-Rovigo

State Highway direction: Ariano-Ferrara

Country Roaddirection: Venezia Ravenna

5

ORGANIZATION CHART

WORKERS REPRESENTATIVE FOR SAFETY

TECHNICAL DIRECTORTD

TECHNICAL ADVISORTA

DESIGN & CALCULATIOND&C

TESTINGT

NUMERIC CONTROL DEPT.CN

LATHE MACHINERY DEPT.TOR

SALES & TECHNICALTCOM

WAREHAUSE & EXPEDITIONSW&E

PAINTINGVER

LOGISTIC & SHIPMENTLOG

ADMINISTRATIONADM

ASSEMBLY MANAGERAM

WORKSHOP MANAGERWM

INTERNATIONAL SALES MANAGER

INT

ASSEMBLY DEPT.A

TRANSEFER MOLDING ROOMTRM

WELDINGSAL

ITALY SALES MANAGERIT

COMMERCIAL DIRECTORCD

PRODUCTION MANAGERPROD

PURCHASE MANAGERPURCH

PREVENTION & PROTECTION RESPONSABLE (EXTERNAL)

RSPPCOMPANY DOCTOR

FIRE & EVACUATIONFIRST AID

QUALITY CONTROL MANAGERQCM

QUALITY CONTROLQC

GENERAL DIRECTORGD

GROUP CHART

6 7

M PUMPS ASIA PACIFIC PTE LTD.18, KAKI BUKIT ROAD 3, #04-12,

ENTREPRENEUR BUSINESS CENTRE, SINGAPORE 415978

M PUMPS CORP414 PHILLIPS, SUITE 100 77301 CONROE, TX USA

M PUMPS INDUSTRY D.O.OLETALIŠKA CESTA 32J,

LIUBIJANA, (SLOVENIA)

M PUMPS PROCESS S.R.L.Mischiatti’s Group

Head Office

Via Milite Ignoto, 51 45019 - Taglio di Po (RO) - Italy

8 9

MAGNETIC DRIVE PUMPS

PUMPS MODEL CN MAG-MS CR MAG-M API 685 CN MAG-M API 685 CN MAG-M

GENERAL DESCRIPTIONCentrifugal multista-ge metallic pumps mag-drive

SOLID HANDLING Centrifugal metallic mag-drive pumps according to API 685 2nd edition Standard

Centrifugal metallic mag-drive pumps according to API 685 2nd edition Standard

Centrifugal metallic mag-drive pumps according to the EN-I-SO 2858 – DIN 24256 Standard

CONFIGURATION BB5 OH2 OH2 OH1/ISO

(AVAILABLE) CONNECTIONSFLANGEDANSI 300/1500DIN - ISO

FLANGEDANSI 300DIN - ISO


FLANGEDANSI 150/300DIN - ISO

MOUNTING / ASSEMBLING CONFIGURATION Long-coupled Long-coupled Long-coupled Long-coupled /

Close-coupled

CAPACITY / FLOW UP TO 300 mc/h 4000 mc/h 4000 mc/h 4000 mc/h

DELIVERY HEAD UP TO 700 m 220 m 220 m 220 m

MAX VISCOSITY 200 cSt 200 cSt 200 cSt 200 cSt

MAX SYSTEM PRESSURE

50 bar (Standard)150 bar (HP Version)Higher pressure available




TEMPERATURE RATINGS -120 °C / +350 °C -120 °C / +350 °C -120 °C / +350 °C -120 °C / +350 °C

NUMBER OF STAGES Up to 10 1 1 1

ELECTRIC MOTORS Up to 700 kW From 2.2 Up to 700 kW

From 2.2 Up to 700 kW

From 2.2 Up to 700 kW

SPEED 1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

LENGTHS / / / /

SUCTION INDUCER AVAILABLE YES YES YES YES

HEATING / COOLING AVAILABLE YES YES YES YES

AVAILABILITY

In conformity to the 94/9/EC directive for installation in environments with explosive atmosphe-re and supplied with certification ATEX II - / 2G cbk II C T2 T5




MATERIALS

WCBStainless SteelHastelloy® C276Incoloy® 825Duplexother materials on request


WCBStainless Steel Hastelloy®C276Incoloy ®825Duplexother materials on request



PUMPS MODEL CM MAG-M CT MAG-M CT MAG-MS SC MAG-M

GENERAL DESCRIPTION Centrifugal metallic mag-drive pumps

Peripheral metallic mag-drive pumps with low NPSH centri-fugal inducer

Peripheral multistage metallic mag-drive pumps with low NPSH centrifugal inducer

Side Channel mag-drive pumps

CONFIGURATION / / OH2 /

(AVAILABLE) CONNECTIONS

FLANGEDANSI 150/300DIN - ISOTHREADEDBSP / NPT




MOUNTING / ASSEMBLING CONFIGURATION Close-coupled Close-coupled Close-coupled Close-coupled

CAPACITY / FLOW UP TO 35 mc/h 12 mc/h 24 mc/h 35 mc/h

DELIVERY HEAD UP TO 36 m 164 m 1000 m 360 m


MAX SYSTEM PRESSURE


50 bar (Standard)Higher pressure available




NUMBER OF STAGES 1 1 2 From 1 to 8

ELECTRIC MOTORS From 0,25 Up to 11 kW

From 0,55 Up to 75 kW



SPEED 1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

LENGTHS / / / /

SUCTION INDUCER AVAILABLE NO Standard Standard NO


AVAILABILITY

In conformity to the ATEX directive, with marking: II - / 2G cbk II C T2 T5




MATERIALS

Stainless Steel Hastelloy® C276Incoloy® 825Duplexother materials on request

WCB Stainless SteelHastelloy® C276Incoloy® 825Duplexother materials on request


Stainless SteelHastelloy® C276Incoloy® 825Duplexother materials on request

PRODUCTION RANGE

10 11


PUMPS MODEL T MAG-M T MAG-XPM VANEMAG V IN LINE

GENERAL DESCRIPTION Peripheral metallic mag-drive pumps

Peripheral metallic mag-drive pumps for high pressure systems

Sealless sliding vane metallic mag-drive pumps

Sealless sliding vane metallic mag-drive pumps

CONFIGURATION / / / /


FLANGEDANSI 150/300DIN - ISOTHREADEDBSP / NPT

FLANGEDAPI Tp 6 BX – Ring Joint

THREADEDG / NPT

FLANGEDANSI 150/300DIN-ISOTHREADEDG / NPT


CAPACITY / FLOW UP TO 9 mc/h 12 mc/h 3000 l/h 3000 l/h

DELIVERY HEAD UP TO 90 m 164 m Up to 14 bar Up to 14 bar


MAX SYSTEM PRESSURE


1500 bar

25 bar (Standard)150 bar (HP Version) Higher pressure available

25 bar (Standard)150 bar (HP Version) Higher pressure available


NUMBER OF STAGES 1 1 1 1


From 0,55 Up to 75 kW From 0,25 Up to 3 kW From 0,25 Up to 3 kW

SPEED 1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm 1450/1750 rpm 1450/1750 rpm

LENGTHS / / / /

SUCTION INDUCER AVAILABLE NO NO NO NO


AVAILABILITY





MATERIALS


Stainless SteelHastelloy® C276Incoloy® 825DuplexTitaniumother materials on request




PUMPS MODEL V MODULAR MHV MAG-M CN MAG-M ANSI B 73.3 CN MAG-MV

GENERAL DESCRIPTIONSealless sliding vane metallic multistage mag-drive pumps

Positive Displace-ment Disc Rotor Pu-mps Magnetic Drive

Metallic Mag-drive Pumps

Centrifugal Vertical in line Mag-drive Pumps

CONFIGURATION /

(AVAILABLE) CONNECTIONS THREADEDG / NPT

THREADEDANSI 150DIN - ISO

FLANGEDANSI 150/300


MOUNTING / ASSEMBLING CONFIGURATION Close-coupled Long coupled /

Close-coupled Long-coupled Vertical

CAPACITY / FLOW UP TO 2000 l/h 45 mc/h 160 mc/h 1800 mc/h

DELIVERY HEAD UP TO Up to 48 bar Up to 8 bar 150 m 95 m

MAX VISCOSITY 2000 cSt 40.000 cSt 200 cSt 200 cSt

MAX SYSTEM PRESSURE


25 bar (Standard)Higher pressure on request




NUMBER OF STAGES Up to 10 1 1 1

ELECTRIC MOTORS Up to 7,5 kW From 0,3 Up to 37 kW From 2,2 Up to 700 kW


SPEED 750/950 rpm 50/300 rpm 1750/3500 rpm 1450/2900 rpm1750/3500 rpm

LENGTHS / / / /

SUCTION INDUCER AVAILABLE YES NO YES YES

HEATING / COOLING AVAILABLE NO NO YES YES

AVAILABILITY




MATERIALS

Stainless Steel for pressure up to 50 barHastelloy® C276 for pressure up to 150 barother materials on request

Cast IronStainless Steel

WCBStainless Steel Hastelloy® C276Incoloy® 825Duplexother materials on request

WCBStainless Steel Hastelloy® C276Incoloy® 825Duplexother materials on request

PRODUCTION RANGE

12 13


PUMPS MODEL GS MAG-M CNV MAG-M CV MAG-M T ECO MAG-M

GENERAL DESCRIPTION Volumetric gear Mag-drive Pumps

Vertical Centrifugal Mag-drive Pumps

Sealless low NPSH sliding vane pumps mag-drive

Peripheral Mag-drive Pumps

CONFIGURATION /


FLANGEDANSI 150DIN - ISOTHREADEDBSP/ NPT

FLANGEDDIN - ISOANSI 150/300


THREADEDBSP / NPT

MOUNTING / ASSEMBLING CONFIGURATION Long-coupled Vertical Close-coupled Close-coupled

CAPACITY / FLOW UP TO 80 mc/h 500 mc/h 3000 l/h 1,5 mc/h

DELIVERY HEAD UP TO 30 bar 220 m Up to 12 bar 85 m


MAX SYSTEM PRESSURE Up to 30 bar

25 bar (Standard)50 bar (HP Version) Higher pressure on request


16 barHigher pressure available

TEMPERATURE RATINGS Up to + 200 °C -120 °C / +250 °C -100 °C / +200 °C -120 °C / +350 °C



From 0,55 Up to 75 kW From 0,25 Up to 3 kW From 0,37 Up to 2,2

kW

SPEED 250/1450 rpm 1450/2900 rpm1750/3500 rpm 1450/1750 rpm 1450/2900 rpm

1750/3500 rpm

LENGTHS / Up to 7 m / /

SUCTION INDUCER AVAILABLE NO YES NO

HEATING / COOLING AVAILABLE NO NO NO

AVAILABILITY




MATERIALS


Stainless SteelHastelloy® C276Incoloy®

Duplex

Stainless Steel for pressure up to 50 bar Hastelloy® C276 for pressure up to 150 barother materials on request

EPDMVITON®

FEPGRAFOILASB. FREE


PUMPS MODEL T MAG-MP CMP ARMORED C MAG-PL TSP MAG-P

GENERAL DESCRIPTION

Horizontal sealless PP and PVDF ar-mored peripheral mag-drive pumps

Centrifugal armored Mag-drive Pumps ac-cording to the EN-ISO 28258 – DIN 24256 Standard

Centrifugal Mag-drive lined Pumps

Sealless PP and PVDF peripheral self priming mag-drive pumps

CONFIGURATION ISO - DIN

(AVAILABLE) CONNECTIONSFLANGEDANSI 150DIN - ISO


FLANGEDUNIVERSALANSI - DIN

FLANGEDANSI 150DIN - ISOTHREADEDBSP / NPT


CAPACITY / FLOW UP TO Up to 13 mc/h Up to 75 mc/h Up to 140 mc/h 12 mc/h

DELIVERY HEAD UP TO Up to 53 m Up to 60 m Up to 44 m Up to 50 m


MAX SYSTEM PRESSURE 16 bar 16 bar 16 bar 6 bar



ELECTRIC MOTORS From 0,18 Up to 9,2 kW From 1,5 Up to 30 kW From 1,5 Up to 18,5

kWFrom 0,18 Up to 9,2 kW

SPEED 1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

LENGTHS / / / /


HEATING / COOLING AVAILABLE NO NO NO NO

AVAILABILITY

In conformity to the ATEX directive, with marking: II - / 3G cbk II C T5




MATERIALS PPPVDF

PPPVDF

PPPVDF

PPPVDF

PRODUCTION RANGE

14 15


PUMPS MODEL VP SERIES C MAG-P CM MAG-P CSP MAG-P

GENERAL DESCRIPTIONSealless PP and PVDF sliding vane mag-dri-ve Pumps

Centrifugal Mag-drive Pumps

Centrifugal PP and PVDF Mag-drive Pumps

Sealless PP and PVDF centrifugal self priming mag-drive pumps

CONFIGURATION


FLANGEDUNIVERSALANSI-DINTHREADEDBSP / NPT

FLANGEDUNIVERSALANSI-DINTHREADEDBSP / NPT For C MAG-P 32-40 pumps

THREADEDBSP / NPT



CAPACITY / FLOW UP TO 3000 l/h 140 mc/h 35 mc/h 70 mc/h

DELIVERY HEAD UP TO Up to 5 bar 44 m 23 m Up to 32 m


MAX SYSTEM PRESSURE 6 bar 6 bar 5 bar 5 bar



ELECTRIC MOTORS From 0,25 Up to 2,2 kW

From 1,5 Up to 18,5 kW



SPEED 1450/1750 rpm 1450/2900 rpm1750/3500 rpm 1450/2900 rpm 1450/2900 rpm

LENGTHS / / / NO



AVAILABILITY





MATERIALS PPPVDF

PPPVDF

PPPVDF

PPPVDF


PUMPS MODEL T MAG-P CV MAG-P CMV MAG-P CL SEAL-M DIN EN 22858

GENERAL DESCRIPTION Peripheral Mag-drive Pumps

Centrifugal Vertical Mag-drive Pumps

Centrifugal Vertical Mag-drive Pumps

Centrifugal lined me-chanical seal pump according to EN 22858/ ISO 2858

CONFIGURATION


FLANGEDANSI 150DIN - ISOTHREADEDBSP / NPT

FLANGEDANSI 150DIN - ISOTHREADEDBSP / NPTfor C MAG-P 32-40 pumps

THREADEDBSP / NPT

FLANGEDDIN

MOUNTING / ASSEMBLING CONFIGURATION Close-coupled Vertical Vertical Bare-frame

CAPACITY / FLOW UP TO 13 mc/h 140 mc/h Up to 30 mc/h 550 mc/h

DELIVERY HEAD UP TO Up to 53 m Up to 44 m Up to 44 m 170 m


MAX SYSTEM PRESSURE 5 bar 5 bar 5 bar 16 Bar

TEMPERATURE RATINGS -30 °C /+90 °C -60 °C / +90 °C -60 °C / +90 °C -30 °C / +140 °C

NUMBER OF STAGES 1 1 1

ELECTRIC MOTORS From 0,18 Up to 9,2 kW




SPEED 1450/2900 rpm 1450/2900 rpm 1450/2900 rpm 1450/2900 rpm

LENGTHS NO Up to 7 m Up to 0,5 m /



AVAILABILITY


In conformity to the 94/9/EC directive for installation in environments with explosive atmosphe-re and supplied with certification ATEX II - / 2G c II C T5

MATERIALS PPPVDF

PPPVDF

PPPVDF CAST IRON / FEP

PRODUCTION RANGE

1716

PERFORMANCE RANGECAPACITY: up to 4000 mc/h

HEAD: up to 1500 m

SYSTEM PRESSURE: up to 1500 bar

TEMPERATURE: from - 90°C up to + 450°C

INSTALLED POWER: up to 1000 kW

special and custom made pumps available upon customer request


PUMPS MODEL CN SEAL-MAPI 610 11TH ED.

CN SEAL-MVAPI 610 11TH ED.

CNV SEAL-MAPI 610 11TH ED.

GENERAL DESCRIPTIONMechanical seal pump According to API 610

Centrifugal heavy duty mechanical seal pumpAccording to API 610

Centrifugal heavy duty mechanical seal pumpAccording to API 610

CONFIGURATION OH2 OH3 VS4

(AVAILABLE) CONNECTIONS FLANGEDANSI 150/300

FLANGEDANSI 300

FLANGEDANSI 150/300

MOUNTING / ASSEMBLING CONFIGURATION Long-coupled Bare-frame Vertical

CAPACITY / FLOW UP TO 4000 mc/h 4000 mc/h 1000 mc/h

DELIVERY HEAD UP TO 220 m 220 m 150 m

MAX VISCOSITY 200 cSt 200 cSt 200 cSt

MAX SYSTEM PRESSURE



25 bar (Standard)50 bar (HP version)

TEMPERATURE RATINGS -120 °C / +350 °C -120 °C / +350 °C -120 °C / +350 °C

NUMBER OF STAGES 1 1 1




SPEED 1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

1450/2900 rpm1750/3500 rpm

LENGTHS / / /

SUCTION INDUCER AVAILABLE YES YES NO

HEATING / COOLING AVAILABLE YES YES YES

AVAILABILITY

In conformity to the 94/9/EC directive for installation in environments with explosive atmosphe-re and supplied with certification II - / 2GD c II C T2 T5

In conformity to the 94/9/EC directive for installation in environments with explosive atmosphe-re and supplied with certification II - / 2GD c II C T2 T5

In conformity to the 94/9/EC directive for installation in environments with explosive atmosphe-re and supplied with certification ATEX II - / 2GD cbk II C T2 T5

MATERIALS




PRODUCTION RANGE PLANT INFORMATION

18 19

PLANT INFORMATION

20 21

LIFTING EQUIPMENTSOver Head cranes: 2x10 Tons Fork lifts: various from 1.5 Tons

MACHINERY UNITS CNC MACHINING CENTER 1200x650x680mm MILLSTAR MCV 1200

CNC MACHINING CENTER 1000x600x600mm MIND MACH T 1000

CNC MACHINING CENTER 600x400x400mm EIKON VCM

MACHINING CENTER 650x350x450 BERICO

MACHINING CENTER 650x360x460 BOMAC

CNC LATHE 1000x2000mm POLARIS

CNC LATHE 760x1000mm VEGA

CNC LATHE 500x1000mm GALAXY NS

CNC LATHE 500x1000mm GALAXY NS

LATHE 630x1500mm SIBIMEX CU 630

LATHE 500x1500mm SIBIMEX CU 500

LATHE 500x1500mm CASTOR 500

CNC SAWBAND MACHINE 410mm IMET

SAWBAND MACHINE 270mm SHARK

RECYCLING MILL 1000 kg/h FBM

DRILLING MACHINE 20/22 BERGONZI

DRILLING MACHINE 30 SERRMAC

DRILLING MACHINE 16 SERRMAC

OVEN 400x400x360 MAULE

OVEN 800x650x650 PAGNOTTA

HYDRAULIC PRESS 20 Ton OMCN

HAND PRESS SEVERAL SEVERAL

WELDING MACHINE 200 TIG SELCO TLH 1500

WELDING MACHINE 400 TIG ESAB

WELDING MACHINE 400 TIG LINCOLN

WELDING MACHINE 250 TIG LINCOLN

WELDING MACHINE 200 MIG ESAB

WELDING MACHINE 400 MIG ESAB

PAINTING CABIN 4000x1500x3000 CIMA

PLANT INFORMATION EQUIPMENTS

23

TESTING EQUIPMENT Nr 2 station end suction – top discharge ½” treaded /flanged connections

Nr 2 station end suction – top discharge 1” treaded /flanged connections

Nr 1 station end suction – top discharge 2” flanged connections



Nr 1 station end suction – top discharge 8” connessioni flangiate



Nr 1 station end suction – top discharge / in line 20” flanged connections



Nr 1 station vertical submersible pumps Up to 1800 mc/h – 7 m

Nr. 1 ARES COORD3 Coordinate measuring machine MOD.07.07.05 700X650X500

DPI equipment Various

N° 3 Torque measurement equipment Up to 50 Nm, up to 200 and up to 1000 Nm

Painting and Overlay thickness testing instruments Several

Pressure gauges Several

Flow meter From 0,1 at 10000 mc/h

Vacuum pump system for vacuum test Up to 50 mbar

Hydrostatic test bench Up to 1500 bar

CEMB Balancing machines with vertical axis Up to 30 kg

CEMB Balancing machine for rotors with Horizontal axis. Mod. ZB300/G/GV dynamic Up to 450 kg

Dual channel vibrometer, balancer, analyzer, tachometer, datalogger, interfaceable to PC mod. CEMB N500 Several

N° 1 test bench: capacity 200 mc, connection up to 32”; N° 1 test bench: capacity 20 mc, connection up to 8”; N° 1 test bench: capacity 1,5 mc, diathermic oil, connection up to 4”; N° 1test bench: capacity 200 lt, diathermic oil, with thermoregulation, for tests up to 350°C, connection up to 1,5”;

Every bench is equipped with Electromagnetic Flow meter, suction and discharge pressure plugs, net analyzer, NPSH test on pumps up to 4000mc/h available.

M PUMPS CONSTRUCTION MATERIALSCategory Forging Cast

Carbon Steel A105 A216 WCB - WCC

Low Temperature Carbon Steel A350 LF2 A352 LCB - LCC

Low AlloyAISI 4140A694 F52-70A350 LF3

A352 LC3

Martensitic Stainless Steel A182 F6 A217 CA15

A182 F6NM A487 CA6NM

Austenitic Stainless Steel

A182 F304A182 F304LA182 F316A182 F316LA182 F316LN_ModA182 F321A182 F347A182 F44 (6% Mo)A182 FXM-19 (Nitronic 50)

A351 CF8A351 CF3A351 CF8MA351 CF3MA351 CF8CA351 CF8CA 351 Gr.Ck3MCuN

Precipitation hardening SS A564 Gr. 630 H1150M (17 4-PH)

Duplex Stainless Steel A182 F51A182 F55

A 890-4A (S31803)A 890-6A (S32760)

Ni-Alloy

B564 N08825B564 N06625Monel 400Monel K-500B637 N07718

Bronze B62 C83600

Aluminum Bronze B148 C95500

Titanium B381 Gr F2; B 348 Gr. 5

Hastelloy®

22

24 25

USER REFERENCE LIST

26 27

26 27

CERTIFICATION

28 29

28 29

CERTIFICATION

30 31

30 31

CERTIFICATION

32 33

32 33

CERTIFICATION

34 35

34 35

CERTIFICATION

36 37

36 37

CERTIFICATION

38 39

38 39

CERTIFICATION

40 41

CONTACTS

M PUMPS PROCESS S.R.L. - ITALYwww.mpumps.it [email protected]

Phone +39 0426 346304 Fax +39 0426 349126

M PUMPS CORP. LTD – USAwww.mpumpscorp.com [email protected]

USA toll free 877 829 2122 Canada and Mexico only +1 540 537 3343

• WILL BOYLAN GENERAL MANAGER [email protected]

M PUMPS INDUSTRY D.O.O.Letališka cesta 32J, Liubijana, (Slovenia)

Phone: +386 59 33 9999

• MIHA PIKALO GENERAL MANAGER [email protected]

M PUMPS ASIA PACIFIC PTE. LTD.www.mpumps.cn

• DAVID PEE GENERAL MANAGER [email protected] Singapore Mobile: (65) 96734280 China Mobile: (86) 13061663038

• SINGAPORE OFFICE Phone: (65) 6316 1339, Fax : (65) 6287 1406

• LOCAL ADMINISTRATION AND SHIPMENT [email protected]

• SHANGHAI OFFICE Phone (86)(21) 6281 1162 / 3 Fax: (65) 6282 1503

• KK ZHUANG LOCAL ADMINISTRATION AND IMPORT/EXPORT [email protected]

• CC HUANG SALES DEPARTMENT AND SERVICE [email protected]

• JOAN LU SALES DEPARTMENT [email protected]

M Pumps Industry d.o.o.

Letališka cesta 32J, Liubijana, (Slovenia)

Phone: +386 59 33 9999

[email protected]

M Pumps Process S.r.l.

Head Office Via Milite Ignoto, 51 - 45019 Taglio Di Po (Ro)

Plant and Mechanical Workshop Via Dell’Artigianato, 120 - 45015 Corbola (Ro)

Phone: +39 0426 346304 Fax: +39 0426 349126

[email protected] www.mpumps.it

M Pumps Corp. Ltd

414 West Phillips, Suite, 100 Conroe - TX - 77301

Phone: +1 540-776-8500 Fax: +1 253-484-4155 USA Toll Free Number: 877-829-2122

[email protected] www.mpumpscorp.com

M Pumps Asia Pacific Pte Ltd

18, Kaki Bukit Road 3, #04-12, Entrepreneur Business Centre, Singapore 415978

Phone: +65 6316 1339 Fax: +65 6316 2278

www.mpumps.cn

A unit of

Documents

COMPANY PROFILE · ELECTRIC MOTORS Up to 7,5 kW From 0,3 Up to 37 kW From 2,2 Up to 700 kW From 2,2 Up to 700 kW SPEED 750/950 rpm 50/300 rpm 1750/3500 rpm 1450/2900 rpm 1750/3500