COMPANY PROFILE - Confindustria · process engineering hours 80.000 electrical engineering hours 70.000 instrumentation, automation and telecommunication engineering hours 90.000

www.seingim.it

COMPANY PROFILE

Index

SEINGIM's Method ......................................................................................................................... 5

The Art of Engineering ..................................................................................................................6

Operational Headquarters ............................................................................................................6

Institutional profile ........................................................................................................................7

Integrated management system ...................................................................................................7

Organizational chart ......................................................................................................................8

Technical capabilities ....................................................................................................................8

SEINGIM’s sectors .........................................................................................................................9

Chemical, Petrochemical, Pharmaceutical ...............................................................................10

Oil&Gas .....................................................................................................................................12

Buildings ...................................................................................................................................14

Infrastructures ...........................................................................................................................18

Energy .......................................................................................................................................20

Industrial research ....................................................................................................................24

Services offered by SEINGIM .....................................................................................................27

Engineering ...............................................................................................................................28

Management .............................................................................................................................34

Software ........................................................................................................................................37

Partners ........................................................................................................................................38

AVAILABLE 365 DAYS A YEAR

5

SEINGIM’s Method

Over the years, we have developed a structured and participatory method, aimed at generating an added value in the satisfaction of our Customers’ needs and desires.

Fabio Marabese - Chairman and Board President SEINGIM GLOBAL SERVICE S.r.l.

WE FACE PROJECTS IN MULTIDISCIPLINARY WAY

OPERATIONAL HEADQUARTERS ON THROUGHOUT THE COUNTRY

CONTINUOUS TRAINING FOR EVERY EMPLOYEE

PROJECTS DEVELOPED WITH OUR OWN STAFF

USE OF BIM (BUILDING INFORMATION MODELING)

RAPID RESPONSES

INITIATIVE AND CONCRETENESS

RELIABILITY IN TIME OF DELIVERY

SEINGIM’s Method

INTEGRITY AND TRANSPARENCY

CERTIFIED PERSONAL FOR RELIEFS IN FIELD

6

In the conception and in the imagination of SEINGIM, engineering is a key tool, which combines at the same time the quality of life, progress, efficiency and the constant search for innovative solutions. We are people, citizens, entrepreneurs, artisans, professionals, public administrators, and we all need in our realities of having a qualified society of professional engineers, always able to solve the various issues related to the different requests. It is in the DNA of SEINGIM to put at the service of all people strategy, culture and professionalism.

The art of Engineering

COOPERATION QUALITY AND INNOVATION

TEAMWORK ENVIRONMENT

Operational Headquarters

– Viale Duca d’Aosta, 67/6 30022 CEGGIA (VE)

– Via Venezia, 90/A 35131 PADOVA

– Via Federico Confalonieri, 38 20124 MILANO

– Via Giuseppe Filippini, 1 61032 FANO (PU)

– Marie Curie Straße, 17 39100 BOLZANO

– Via Giuseppe Aiana, 12 09121 - Elmas - CAGLIARI

– Via Enrico Fermi, 2749 21027 ISPRA (VA)

– Via Barnaba Oriani, 103 00197 ROMA

Fano

Padova

Ceggia

BolzanoMilano

Roma

Cagliari

Ispra

7

In the strategic vision to steadily improve ourselves, trying to reach the excellence, SEINGIM GLOBAL SERVICE S.r.l. is engaged to update and integrate the operational standards of the offered services. In particular, in order to satisfy Customer's satisfaction, we cured all the aspects that allow the achievement of an Integrated management system for QUALITY, HEALTH/SAFETY, ENVIRONMENT and ENERGY. The certifications UNI EN ISO 9001:2015, BS OHSAS 18001:2007, UNI EN ISO 14001:2015, UNI CEI EN ISO 50001:2011 attest the effective realization of this Integrated Management System and provide the incitement for our continuous improvement to the customer service.

Institutional profile

Integrated Management System

NameSEINGIM GLOBAL SERVICE S.r.l.

Establishment 27/04/1999

Legal Headquarters Vicolo degli Olmi, 57 30022 Ceggia (VE)

Registration to Companies' Registryn. 32264/99

R.E.A. VE – 284489

V.A.T.03133300271

Insurance

Lloyd's

Annual Turnover (included Seingim sas e Studio Marabese)2017 – € 5.470.000,00

QualityUNI EN ISO 9001:2015Cert. n. 6074 by Certiquality S.r.l

Health and Safety BS OHSAS 18001:2007Cert. n. 22514 by Certiquality S.r.l

Environment UNI EN ISO 14001:2015Cert. n. 25065 by Certiquality S.r.l

Energy UNI CEI EN ISO 50001:2011Cert. n. 26487 by Certiquality S.r.l

8

2019 Technical capabilities

The strength of SEINGIM is in the care of human resources in the integration, in trainings and in the relations between workers. For this, we can achieve exceptional results in terms of production, with a united and motivated team, able to share ideas and objectives, working side by side in each project.

Organizational chart Board of Directors

Strategic Direction

Commercial Direction Financial Direction Marketing Office

General Services

InstrumentationAutomationTelecomm.EngineeringDepartment

Mechanical and PipingEngineeringDepartment

Civil - Structural

EngineeringDepartment

Electrical Engineering Department

Process Engineering Department

Strategic Development Committee

AuditingLegal Office

Ext. Relationship

Health & Safety Responsible

Chief Executive Officer

General Director

Commercial DptBuildings/Infrastr.

Commercial DptIndustrial/Energy

Integrated Management

System Manager

President

Technical Direction Industrial Accounting

Human Resources Management

Administrative Direction

22.000PROCESS

ENGINEERING HOURS

80.000ELECTRICAL

ENGINEERING HOURS

70.000INSTRUMENTATION, AUTOMATION AND

TELECOMMUNICATION ENGINEERING HOURS

90.000MECHANICAL AND PIPING

ENGINEERING HOURS (THERMOTECHNICS

AND HVAC, MACHINERY & PACKAGE, STATIC

EQUIPMENT)

38.000CIVIL AND

STRUCTURAL ENGINEERING HOURS

20.000PROJECT

MANAGEMENTHOURS

320.000TOTAL HOURS

YEAR 2019

PM 2

PM ...

PM 1

PM 3

Planning and Order Management

Chemical, Petrochemical, Pharmaceutical

SEINGIM’S SECTORS

Oil & Gas

Buildings

Infrastructures

Energy

Industrial research

10

Chemical, Petrochemical, Pharmaceutical

SECTORS

Major clients:

WASTE WATER TREATMENT PLANTS

PHARMACEUTICAL PLANTS

BIOCHEMICAL PLANTS

PETROCHEMICAL PLANTS

PROCESS PLANTS

This sector deals with:

ABBALLNEXAMBIENTE SCAMEC FOSTER WHEELERARKEMAARTENIUS ATZWANGERCABOT

CAFFARO INDUSTRIECASALE SACS IMPIANTICYTECDECALENI SYNDIAL FINCANTIERIGALENTIS

HALO INDUSTRYHTC BIO INNOVATIONIMPRESA MARCATOKEMIRA ITALYMAEMATER BIOTECHMONTEFIBRE NOVAMONT

NOVELLO GROUPORV MANUFACTURINGRECKITT BENCKISERSAPIOSELENISSIAD

11

12

Oil & Gas

SECTORS


OFFSHORE OIL PLATFORMS ONSHORE OIL PLANTS

COMPRESSION GAS STATIONSNATURAL GAS STORAGE

OIL REFINERIES

Major clients:ABBAQUAENGINEERINGBASIS ENGINEERINGCS IMPIANTI EDIPOWEREDISONENI

ENI PROGETTIENI VERSALISMARISP.A.S.PAPOLAPIETRO FIORENTINIRENCO

SAIPEMSIMETECHFEMTECNOMARETHERMOENGINEERINGVALVITALIAVENICE LNG

14

Buildings

SECTORS

RESIDENTIAL TOWERS

INSTRUCTION

OFFICES COMMERCIAL

MULTIFUNCTIONAL


Major clients:ACQUA SAN BENEDETTOAEROPORTO DI VENEZIA AEROPORTO DI BERGAMO AEROPORTO DI BOLOGNAAIR CHEFANASANTONIO SV - AGRIVILLAGE

AREA ENGINEERINGAUCHANCERVETCARRON COSTRUZIONIDECATHLONDIESELE.R.P.A.

F&M INGEGNERIAFENDIFURLAGEOXGRUPPO FS HAPIMAG ITALIAINTESA SAN PAOLO

IRCALA RINASCENTELADURNERLIDLLUXOTTICA GROUPMARIELLA BURANIMcARTHURGLEN ITALY

16

Buildings

SECTORS

PUBLIC BUILDINGS

SPORT & FREE TIME

HISTORICAL HERITAGE

INDUSTRIAL

HOSPITALITYHOSPITAL CONSTRUCTIONS


Major clients:MILANO DUNEONE WORKSOSRAMPALA ARREXPAPALINIPARCO DELLA CERTOSAPARK HOTEL BRASILIAPARK HOTEL JUNIOR

PIOVANPOOL ENGINEERINGPRISMA ENGINEERINGSACAIMSALESIANISILIS PARKSIMONE MICHELISTEFANEL

SUORE FRANCESCANETAJER D’OROUNICREDITUNITED COLORS OF BENETTONUPIM

18

Infrastructures

SECTORS

ROADS AND HIGHWAYS AIRPORTS

PORTS SEA-BASED CONSTRUCTIONS


Major clients:AEROPORTO DI VENEZIAAEROPORTO DI BERGAMOAEROPORTO DI BOLOGNAANASAPLEONAAPVC.E.R.V.E.T.

CARRON COSTRUZIONIF&M INGEGNERIAGRUPPO FS L&S GROUPMcARTHURGLEN ITALYONE WORKSOPEN FIBER

PARCO DELLA CERTOSAPOOL ENGINEERINGPRISMA ENGINEERINGPRO.TEC.OSACAIMSIRAM

TELECOMMUNICATION NETWORK

2020

Energy

WASTE TREATMENT PLANTS

SECTORS

HYDROELECTRIC POWER PLANTS THERMOELECTRIC POWER PLANTS

COGENERATION/ TRIGENERATION PLANTS


Major clients:ACEGAS – APSACTVALPERIAAMGA – CALORE & IMPIANTIATER VENEZIAATZWANGERBILFINGER SIELV

COMUNE DI ALLEGHECOMUNE DI ERACLEACOMUNE DI JESOLOCOMUNE DI TREVISOCOMUNE DI VENEZIACPL CONCORDIA E–DISTRIBUZIONE

EDISONENELGRUPPO VERITASGSE – GESTORE SERVIZI ENERGETICIJESOLO PATRIMONIO

2222

Energy

SECTORS

PHOTOVOLTAICSOLAR HEATING COLLECTORS

WIND POWER

GEOTHERMAL ENERGY

BIOMASS


Major clients:LADURNERMANUTENCOOP FACILITYPROVINCIA DI PADOVAPROVINCIA DI TREVISOPROVINCIA DI VENEZIAREGIONE EMILIA ROMAGNAREGIONE LOMBARDIA

REGIONE PIEMONTEREGIONE VENETOS.V.O.L.T.A.SINERGIESIRAMSKILLS. AGRICOLA VISENTINI

SOLARIS ENERGYTREVISANULSS 3 SERENISSIMAULSS 4 VENETO ORIENTALEVEGA ENERGIE

24

Industrial Research

SECTORS

Carbon Fiber Green Oil HOFER (HOrizon For the carbon fibER) Project’ goal is the study of an alternative Carbon Fibre (CF) precursor, based on lignin (a renewable source). The objective is the production of sustainable and cheaper CF materials, with positive impact on technological and economical aspects. To-date, the use and diffusion of CF materials has been limited by production costs. These are mainly due to precursor obtained from acrylonitrile polymerization and the related complex production processes. HOFER will generate R&D and market expansion in CF business. Lignin can be obtained from many industrial process waste (e.g. paper production and bio-refineries), favoring waste enhancement as secondary raw material, thus reducing waste treatment and pollution. This recovery, linked to the natural abundance of lignin and its chemical properties, produces virtuous mechanisms in economic and technological aspects, related also to the “Circular Economy”. HOFER’s main target is to produce a low to medium grade CF at a low cost extending its applications to various sectors (e.g. civil strengthening, healthcare devices, etc.) HOFER objectives are to demonstrate the feasibility and sustainability of a new process, proving the scalability to industrial needs, bring EU industries to leading positions in the CF field, promote new investments, currently limited and dependent on non-EU markets, expand CF production and markets, leading to employment growth.

Green Oil bio refining plant for the sustainable processes experimentation by carbon dioxide. The project has involved for over 2 years SEINGIM jointly with: Parco Vega, Sapio, Cà Foscari University of Venice and University of Udine. The first experimentations done with rapeseed, hemp and grape seeds have brought very interesting results. Analyzing the grape seeds, the very high value of EPA (Omega 3 and 6) stands out. The use of this element is widespread in pharmacy and homeopathy. It raises lots of interest the fact that hemp contains a notable quality of linoleic acid that is useful for cosmetics. The systems has been designed both for the experimentation with liquid and solid matrix. It is important to note that the results obtained are achieved through a “green” system, with 0 emissions, using a natural solvent such as carbon dioxide (CO2) often used in supercritical state. Using this natural solvent, we can substitute the artificial and chemical solvents that can pollute the final product. SEINGIM disposes of a plant with enormous experimentation potential. SEINGIM puts this potential available to all the public and private bodies that would like to realize research and development, offering also technical and administrative support. This interesting and formative experience has brought SEINGIM to the first approach towards the new frontier of the GREEN CHEMISTRY, natural and substitutive to the current chemistry.


SERVICES OFFERED BY SEINGIM

Management

Engineering

• Process Engineering• Electrical Engineering • Instrumental Engineering• Automation and Control Engineering• Telecommunications Engineering• Machinery, Package, Static equipment and

Piping Engineering• Thermotechnics and HVAC Engineering• Civil and Structural Engineering• Energy Engineering – Renewable Energy• Energy Engineering – Audit and Efficiency• Fire Protection Engineering• Environment and Safety

• Project Management & Control• Planning and Scheduling Management• Cost Management & Control• Procedures / Authority Requirements• Procurement Management• Construction Management• Project Completion Management• Commissioning & Acceptance Testing

Management

28

SERVICES - ENGINEERING

Main activities developed• Site survey• Consultancy and feasibility study• Process Design Data Book (system

operational capability, technology description, process unit description, site environmental conditions, consumptions and characteristics of raw materials, utilities characteristics and relevant energy consumption, preliminary plant layout)

• Energy and material balance• Fluids list with specified design conditions

and materials requirements• PFD (Process Flow Diagrams) • P&ID (Piping & Instrumentation Diagrams) • Equipment sizing, control instrument and

safety equipment• Piping Specifications• Plant Operation Manual • Technical specifications for purchase and

request for technical proposal • Evaluation and technical alignment of

technical bids• Economic evaluation of the works • Operation management and works

supervision • Pre-commissioning, commissioning, Plants

Start-Up

Main activities developed• Site survey• System verification w.r.t standards and

regulations compliance• HV Transmission lines• MV/LV Electrical cabins• PCC (Power Control Centre) and MCC

(Motor Control Centre)• Electric Switchboards, Circuit breaker

selection and power lines sizing• Lighting plants and Lighting calculations

Electric power lines sizing and relevant protection coordination

• Earthing systems• LPS (Lightning Protection Systems) • Cathodic protection systems• Sound diffusion systems and EVAC

(Emergency Voice and Communication) • UPS (Uninterruptible Power Supply)

systems and Electric generator systems • Technical specifications for purchase and

request for technical proposal, evaluation and technical alignment of technical bids

• MTO (Material Take Off) and BOQ (Bill of quantities)

• Economic quantification of the works • Operation management and works

supervision• Pre-commissioning, commissioning, Plants

Start-Up

Process Engineering

Electrical Engineering

29


Main activities developed• Site survey• Data sheets of valves, metering, control

and safety instruments• Positioning layout of instruments, junction

boxes, compressed air distributors • Cable trays paths layouts• Control room layout• Cables list• Hook-up drawings: pneumatic and

electrical (primary and secondary)• Loop diagrams Data sheet: junction boxes,

instrumentation cables, instrumentation equipment, etc.

• Intrinsically Safe Loop verification• Switchboards of electromechanical (relay)

safety interlocks• Pre-commissioning protocol• Punch list• Technical specifications for purchase and

request for technical proposal• Evaluation and alignment of technical bids • MTO (Material Take Off)• BOQ (Bill of quantities)• Economic quantification of the works• Operation management and works


Start-Up

Main activities developed• Site survey• Functional specifications of automation /

control systems• Cause-Effect Analysis diagrams/tables • DCS I/O and Interlocks signals list• PLC (Programmable Logic Controller),

DCS (Distributed Control Systems), ESD (Emergency Shutdown System), F&G (Fire & Gas), SIL (Safety Integrity Level), PCS (Process Control System)

• RTU (Remote Terminal Unit) systems• Automation and control logic diagrams

development• Process synoptic graphic pages• Technical specifications for purchase and

request for technical proposal• Evaluation and alignment of technical bids• MTO (Material Take Off)• BOQ (Bill of quantities)• Economic quantification of the works• Operation management and works


Start-Up

Instrumental Engineering

Automation and Control Engineering

30

Main activities developed• Site survey• PABX (Private Automatic Branch exchange)

systems• PAGA (Public Address General Alarm)

systems• TETRA (Terrestrial Trunked Radio) systems• GPS (Global Position System) systems• UHF/VHF systems• LAN (Local Area Network) systems• VOIP (Voice Over IP) systems• TV Entertainment systems• TVCC (Close Circuit TV) systems• TV-Sat systems• Antenna systems• Technical specifications for purchase and

request for technical proposal• Evaluation and alignment of technical bids• MTO (Material Take Off)• BOQ (Bill of quantities)• Economic quantification of the works• Operation management and works


Start-Up

Telecommunications Engineering

Main activities developed• Site survey• Equipment Data Sheets (tanks, vessels,

columns, heat exchangers, etc.)• Lines List• Pressure Equipment Sizing conforming to

PED (Pressure Equipment Directive)• Equipment layout• 2D and 3D Pipe routing design, equipment

nozzles orientation definition• Isometric Drawings (Sketch)• Stress Analysis• Coating and insulation technical

specifications preparation• Technical specifications for purchase and

request for technical proposal, evaluation and alignment of technical bids

• MTO (Material Take Off)• BOQ (Bill of quantities), economic

evaluation of the works• Operation management and works


Start-Up

Machinery, Package, Static equip. and Piping Engineering


31

Main activities developed• Site Survey• Structural calculations (reinforced concrete

elements, metallic structures, etc.)• Stress and deformation analyses of the

structures• Structural limit state analysis• Structures instability analysis• Foundations loads calculations• CoG (center of gravity) calculations• Definition of lifting schemes/technical

procedures• Assembly and detail drawings of main

metallic structures• Assembly and detail drawings of secondary

metallic structures (stairs, balconies, walkways, railings, etc.)

• Bureaucratic procedures for building permits• Value estimations, cadastral (land registry)

certificates and procedures, fractioning documentation, cadastral (land registry) stacking and servitude procedures, services for expropriation procedures

• Safety coordination during design and/or execution phases

• Technical specifications for purchase and request for technical proposal

• Evaluation and alignment of technical bids• MTO (Material Take Off)• BOQ (Bill of quantities), economic

quantification of the works• Operation management and works


Start-Up

Civil and Structural Engineering

Thermotechnics and HVAC Engineering

Main activities developed• Site survey• System verification in compliance with

Italian Ministerial Decree 37/08 and Italian Legislative Decree 81/08

• Heating and air conditioning systems• Air conditioning and ventilation, sanitary

water systems, firefighting systems, Solar water heating systems

• Assistance in the tender for contractor selection

• Cogeneration systems• Rain water collection and recovery• Technical advice on regulations in force• Exhaust fumes and technical gases• Methane and industrial gas systems• Heating and refrigerating systems• Lawn irrigation• Control and adjustment systems• Technical specifications for the purchase

and requests for quotations• Evaluation and alignment of technical bids• BOQ (Bill of quantities), economic



Start-Up


32

Energy Engineering Audit and Efficiency

Main activities developed• Survey of the housing and facilities • Analysis of the building, of opaque

surfaces, transparent and floors dispersants

• Production of Energy Diagnosis made to the standard required by the UNI CEI / TR 11428

• Verification of the energy needs and the degree of energy efficiency

• Analysis of energy consumption • Analysis of energy efficiency rate • Study of efficiency energy rate of the

systems• Estimation of the potential advantages and

costs of intervention, financial assessment • Support from local authorities and private

companies for procedures aimed at energy planning and installation of optimal production systems

• Advice and assistance for the preparation of documents necessary to obtain white certificates and other state facilities

• Energy certification of technical reports and editorial specialist (Law 10)

• Technical management of the work• Assistance at Certifying Organizations

(Leed, Casaclima, etc.) for the procedures to energy certification

Energy Engineering Renewable Energy

Main activities developed• Site survey: Solar, Photovoltaic, Biomass,

Geothermal, Hydroelectric, Wind plants• System verification in compliance with

regulations in force• Preliminary projects for request of

authorizations• Detailed construction design• Clamping system design• Technical advice on regulations in force• Technical specifications for the purchase

and requests for bids• Evaluation and alignment of technical offers• BOQ (Bill of quantities), economic



Start-Up• Advice and assistance for the preparation

of documents necessary to obtain incentives


33

Environment and Safety

Main activities developed

Acoustics• Design of passive acoustic requisites for

buildings in compliance with Decree of the President of the Council of Ministers dated 05-12-1997 implementing the framework law on noise pollution No. 447 dated 26/10/1998

• Evaluation of acoustic requirements for internal sound sources (technological systems)

• Sound insulation testing

Safety on construction sites• Design and execution stages coordination

Safety on workplaces• Risk exposure evaluation

Electromagnetic impact measures and consultancy• Measures of exposure to various sources of• electromagnetic fields both in the civil and

industrial sectors

Hazardous area classification• Classification of hazardous areas according

to applicable regulations and standards

Main activities developed• Site survey• Technical Data Sheets of equipment for

detection, warning and fire extinguishing • Structure adaptation plan in compliance

with specific fire regulations and guidelines (not specifically regulated)

• Project verification request to the Fire Department for obtaining the Fire-safety Compliance declaration

• Technical Documentation: processing and preparation of the technical report and the drawings in compliance with local regulations

• Fire Resistance Certifications of structure • Sworn confirming compliance with the

applicable regulations in fire safety• Renewal of the Fire Prevention Certification

for existing activities• Evacuation plans in compliance with Italian

Ministerial Decree dated 10 March 1998 • Operation management and works


Start-Up

Fire Protection Engineering


34

• Project Execution Plan• Control that Customer project targets and

requirements are achieved• Project organization & control (functions/

responsibilities)• Organization and management of

the required personnel (works and administration)

• Communication management• Time management and reporting• Scope management• Risk management• Health, Safety, Environment and Quality

Assurance Management• Document Control management• Progress reporting & meeting management• Organization and issuing of meetings

minutes• Project closeout reporting• Contractors’ Engineering and Design

Package documentation reviews

• Master Planning (Engineering, Construction, Procurement, Erection, Commissioning)

• Target Time Schedule (critical milestones)• Engineering Time Schedule (engineering

by Contractor and others)• Purchasing Time Schedule• Detailed erection and assembly planning • Document Delivery schedules• Contract Control schedules• Project progress reports

Project Management &Control

Planning and SchedulingManagement

SERVICES - MANAGEMENT

35

• Electrical, Instrumentation, & Control (EIC) procedures

• Fire Safety and Risk Analysis Reports• Building Regulations procedures• Local Permitting• Environmental procedures

• Cost breakdown structure• Allocation of project budget to individual

purchase packages and cost accounts• Orders control• Invoice control compared to committed

costs• Control of costs w.r.t. predicted final cost

projections• Estimation of cash flow• Cost reporting• Claim management control/reporting• Cost of change/Pricing variations

Cost Management & Control

Procedures / Authority Requirements


• Procurement plan and strategy • Engineering Specification and Definition of

Each Tender• Pre-selection of suppliers based on tender

comparison and recommendation for detailed commercial evaluation

• Supplier list• Supplier audits• Enquiries delivery to multiple supplier• Bid clarification meetings (Technical

evaluation / clarifications)• Technical and initial commercial tender

comparison report• Final commercial comparison report and

recommendations selection • Preparation of purchase orders and

contracts• Procurement status reporting and follow-up• Variation control and management• Supplier documentation review, approval

and final delivery documentation follow-up (Report)

• Expediting and Report• Payment arrangement• Check Supplier invoices• Open package inspection (material and

equipment inspection/acceptance)• Customs clearance/inland transportation• Entrance control on-site for equipment and

materials• Warehouse control

Procurement Management

36


• Construction plan, Construction Management, Site Administration, progress reporting

• Constructability analysis, Construction Execution Plan and Procedures

• Quality Plan, Construction Conformance Checking

• Definition of organization and responsibilities

• Site Material Control• Emergency evacuations procedures, Site

Security Control, First-aid program• Supervision of the site office and field

organization• Preparation and update of construction and

erection planning• Management and coordination of activities• Report and coordinate the establishment of

corrective plans for delays• Assurance of proper availability of all

updated project & technical documentation• Site Document Management• Coordination activities of the works

inspectors• Evaluation of subcontractor’s supervision &

administrative policies• Approval of the completion of the

construction works based on the inspector’s reports

Construction Management

• Commissioning Plan• Commissioning Execution• Coordination of start up• Coordination of test runs• Acceptance Testing Plan• Acceptance Testing Execution• Acceptance Testing Reports

• Management of handover procedures• Development and Management of Punch

Lists• Rectification and re-check• “As Built” documentation for all Disciplines

Project Completion Management

Commissioning & Acceptance Testing Management

37

Software

SOFTWARE

General for all disciplines• OFFICE Various Releases (Word, Excel,

Access, PowerPoint, Publisher, Outlook)• AutoCAD (Various Releases)• Autodesk REVIT (BIM)• Microstation/J - Bentley Systems• ACCA Software - Primus C (Accounting)• ACCA Software - Primus P+A (Accounting)• ACCA Software - Mantus (Mainentance Plan)• DWG Trueview• NavisWorks JetSream• Adobe CC (Photoshop, Illustrator, etc)

Process Engineering• Aspen Tech - Aspen HYSIS (Process

simulation)• Aspen Tech - Aspen Plus (Chemical

process and polymers simulation)• Schneider - Simsci Pro II and Excel

calculation sheets (equipment calculation)• Schneider - Simsci Pipephase (hydraulic

calculation)• Intergraph Corporation Smart Plant P&ID• Integraph Corporation CADWorx P&ID

Professional

Electrical Engineering• Integraph Corporation Smart Plant

Electrical• ETAP (Electrical Power System Analysis &

Operation Software)• Electrographics, Ampere Professional

(Sizing and Electrical Calculations)• Electrographics, Smart Professional

(Design Optimization in computer)• NeXT, ProLED (Electric Power Distribution

Design)• Dialux (Lighting calculations)• ATEX Gas e Polveri TNE (Hazardous Area

Classificlation)• ZEUS 2 (Lightning Protection System)

Thermotechnics & HVAC Engineering• Edilclima (Buildings Energy performance)• Energy Plus (Buildings Energy

performance)• CENED Plus (Buildings Energy

performance)

Instrumental, Automation & Control, Telecommunications Engineering• Intergraph Corporation Smart Plant

Instrumentation (ex: INTOOLS) • Aveva Instrumentation• Electrographics, Smart Professional

(Design optimization in computer)• Instrucalc (Sizing of regulation Valves and

Flow rate elements) • CONVAL (Valves Sizing)

Mechanical & Piping Engineering• Integraph Corporation PDS (3D Modelling)• Intergraph Corporation Smart Plant 3D

(Modelling 3D)• Integraph Corporation CADWorx Plant

Professional• Aveva PDMS (3D Modelling)• CAESAR II (Stress analysis) • PUMA/ECOS: piping MTO• HTRI /HTFS (Thermal rating of heat

exchanger)• Integraph Corporation Isogen• Integraph Corporation PV Elite

Civil and Structural Engineering• Tekla Structures 14 Full Detailing• NeXT, ProLED (Electric Power Distribution

Design)• SAP 2000• STAAD3

Energy Engineering• PV configurator (Photovoltaic Analysis)• ACCA Software - Solarius-PV (Photovoltaic

Analysis)• PV Syst 6 Premium (Photovoltaic Analysis)

Fire Protection Engineering • Namirial - CPI Win BM (Fire Fighting)

Project Management• Microsoft Project• Oracle Primavera P6 Professional

SEINGIM's Team - July 2018

Partner

40

Editi

on D

ecem

ber 2

018

SEIN

GIM

EN

HEADQUARTERS:

CEGGIAViale Duca d’Aosta, 67/630022 - Ceggia (VE)

PADOVAVia Venezia, 90/A35131 - Padova

MILANOVia Federico Confalonieri, 3820124 - Milano

FANOVia Giuseppe Filippini, 161032 - Fano (PU)

BOLZANOMarie Curie Straße, 1739100 - Bolzano

CAGLIARIVia Giuseppe Aiana, 6709030 - Elmas (CA)

ISPRAVia Enrico Fermi, 274921027 - Ispra (VA) c/o JRC Joint Research Centre

ROMAVia Barnaba Oriani, 10300197 - Roma

[email protected] - www.seingim.it

Documents

COMPANY PROFILE - Confindustria · process engineering hours 80.000 electrical engineering hours 70.000 instrumentation, automation and telecommunication engineering hours 90.000