M/s. Reliable Valves is a Partnership firm & is engaged in Design, Manufacture and Supply of Industrial

Valves.

The Company is owned by Mr Ajay Pillai and Mr Kishor Pipalia.

Quality Management System has been certified to ISO 9001:2008 By TUV Rheinland vide ID:9105067267.

The Company has got the Certificate of Authority to use the official American Petroleum Institute (API)

monogram under the API License No.

» 6D-1214

» 600-0140

» 6A-1318

The Company is also conferred with API 6FA/607 (Fire Safe Approval) for Gate & Ball Valves by

Det Norske Varitas A S (DNV).

Company Profile

As We Believe in Success, “Fit to Use” is the word, Reliable Valve has coined and leaped to their

esteemed customers.

Success primarily depends on customer’s satisfaction in turn quality of product and service rendered.

Today in the age of cut throat competition, Reliable Valves had ensured customer satisfaction and to

become “Numero Uno” in the field of Design, Manufacture, Supply and Service Industrial valves.

At last, Reliable Valves is committed to serve the society with all assurance of sustainable development

by adhering to Our Quality Policy, Quality Objectives and Environment Health and Safety Policy.

Reliable Valves look forward for well being of entire Reliable Valves Family along with stakeholders.

Vision

Rise to the needs of the customers while simultaneously achieving the company’s goal through Quality and Reliability by continual improvement of API Spec Q1, ISO 9001, API Spec 6D, API Spec 600 & API Spec 6A Valves and the people at all levels, by adopting policy of

» System Driven

» Customer Focused

» Value Based

» Service Oriented Work Culture

Quality Policy

» To make Safety, Health and Environmental considerations a priority during planning & development of products

» To identify and address the social concerns about raw materials, products and operations

» To operate the machineries within the facility in a manner to protect the environment, safety and health of our employees and the public at large

» To counsel both internal and external customers significantly industry related safety, health and environment hazards, and to recommend protective measures

» To dedicate and commit to reduce overall emissions and waste generation

» To comply with statutory norms for responsible laws, regulations and standards to safeguard the community,

workplace and environment

» To economically develop and manufacture the products to conserve those resources by using energy efficiently

» To promote the principles and practices by sharing experience and offering assistance to others who are engaged in similar business.

Environment, Health & Safety Policy

Certificates

ISO 9001:2008 ID: 9105067267

API - 6D

API - 6A

API - 600

» Anti-Static Device & Blowout Proof» Double Block & Bleed» Double Body Sealing» Multiple Stem Sealing» Sealant System & Lubricant» Fire Safe Design» Corrosion Protection & Painting» Operation Manual & Actuator

Trunnion Mounted Ball Valve

Design Features

Specifications & Standards

Design & Manufacture

Body & Trim

Casting Inspection

Testing

Fire Safe

Valve Bore

Flange Dimensions

Drain / Vent / Bypass

SW END

BW END

Thread END

Face to Face

: BS 5351 / API 6D/ANSI B16:34

: ASTM A/AISI/Nace MR 01-75

: MSS SP-53, 55, 59, 94

: BS 6755 Part-I / API 598

: API 607, API 6FA / BS 6755 Part II

: API 6D

: ANSI B16.5 / B16.47 / MSS SP-44

: MSS SP-45 / API 6D

: ANSI B16.11

: ANSI B16.25 / B31.8

: ANSI B 1.20.1 / ANSI B 2.1

: ANSI B16.10 / API-6D

» Anti-Static Device » Double Block & Bleed» Double Body Sealing» Fire Safe Design

Through Conduit Rising Stem Gate Valve

Design Features

Specifications & Standards

Design & ManufactureBody & Trim Casting Inspection Testing Valve Bore Flange Dimensions Drain / Vent / BypassFace to Face

: API 6D/ANSI B16:34: ASTM A/AISI/Nace MR 01-75: MSS SP-53, 55, 59, 94: BS 6755 Part-I / API 598: API 6D : ANSI B16.5 / B16.47 / MSS SP-44: MSS SP-45 / API 6D: ANSI B16.10 / API-6D

» Sealant System & Lubricant» Corrosion Protection & Painting» Operation Manual & Actuator

» Body Single Piece without any Joints & External Mountings » Lever & Bracket Arrangement Inside Body » Top Cover without any Suspension » Integral Stopper for Swing Disc

Swing Check Valve

Design Features

Specifications & Standards

Design & ManufactureBody & Trim Casting Inspection Testing Valve Bore Flange Dimensions Drain / Vent / BypassFace to Face

: BS 1868/ API 6D/ANSI B16:34: ASTM A/AISI/Nace MR 01-75: MSS SP-53, 55, 59, 94: BS 6755 Part-I / API 598: API 6D : ANSI B16.5 / B16.47 / MSS SP-44: MSS SP-45 / API 6D: ANSI B16.10 / API-6D

» Quarter-turn» Large protected metal-to-metal seats» On-line maintenance facility» Operation Manual & Actuator

Tapper Plug Valve

Design Features

Specifications & Standards

Design & ManufactureBody & Trim Casting Inspection Testing Valve Bore Flange Dimensions Drain / Vent / BypassFace to Face

: BS 5353 / API 6D/ANSI B16:34: ASTM A/AISI/Nace MR 01-75: MSS SP-53, 55, 59, 94: BS 6755 Part-I / API 598: API 6D : ANSI B16.5 / B16.47 / MSS SP-44: MSS SP-45 / API 6D: ANSI B16.10 / API-6D

» Rising Stem » Metal-to-Metal Seats» On-line Gland Re-Stuffing facility» Operation Manual & Actuator

Bolted Bonnet Steel Gate Valve

Design Features

Specifications & Standards

Design & ManufactureBody & Trim Casting Inspection Testing Valve Bore Flange Dimensions Drain / Vent / BypassFace to Face

: BS 1414 / API 600/ANSI B16:34: ASTM A/AISI/Nace MR 01-75: MSS SP-53, 55, 59, 94: BS 6755 Part-I / API 598: ASME B 16.34: ANSI B16.5 / B16.47 / MSS SP-44: MSS SP-45 / API 6D: ANSI B16.10 / API-6D

Wellhead & Christmas Tree Equipments

» Valves & Choke

Reliable Valves Design & Manufacture the equipments of wellhead andChristmas tree. Following are the Equipments manufactured:

• Flow Line Gate Valves • Adjustable Chokes

» Loose Connectors (Flanged, other end Connectors & Welded)• Bull Plugs • Valve Removal Plugs • Weld Neck Connectors • Blind Connectors

» Other Equipments

• Ring Gaskets

» Connectors & Fittings• Tees & Crosses

» Non Rising Stem» Metal-to-Metal Seats» Glandless Stuffing Box » Operation Manual & Actuator

Flow Line Gate Valve

Design Features

Specifications & Standards

Design & ManufactureBody & Trim Testing Valve Bore Flange Dimensions Drain / Vent / BypassFace to Face

: API 6A : API 6A: API 6A/API 598: API 6A: ANSI B16.5 /API 6A: MSS SP-45 / API 6A: ANSI B16.10 / API-6A

» Flow Control Through Orifice » Metal-to-Metal Seats» Glandless Stuffing Box » Operation Manual & Actuator

Adjustable Choke

Design Features

Specifications & Standards

Design & ManufactureBody & Trim Testing Valve Bore Flange Dimensions Drain / Vent / BypassFace to Face

: API 6A : API 6A: API 6A/API 598: API 6A: ANSI B16.5 /API 6A: MSS SP-45 / API 6A: ANSI B16.10 / API-6A

Pressure-containing closer for a female threaded and or outlet connection which may have an

internal counter bore and/or test port.

Bull Plugs Valve Removal Plugs Other End Connector

Threaded plug that can be install in the well head to

enable Gate Valve remover under pressure

» Weld Neck Flanges» Blind Flanges» Companion Flanges

Pressure sealing cum connecting elements and are used in high pressure systems They are commonly available in round, flat, oval and chamfered sections.

Ring Gaskets Tees Crosses

Pressure containing fitting with three openings. Two openings opposite one another form the run portion of the tee, and one opening is at 90 to the line of the run. Tees may be equipped with threads, flanges, studs or other end connectors.

Pressure containing fitting with a minimum of four openings. Cross may be equipped with threads, flanges, studs or other end connectors.

» Cast & Forged Body» OS & Y Type» Gland Restuffing On Line» Operation Manual & Actuator

Globe Valve

Design Features

Specifications & Standards

Valve Design Pressure TestingPressure Temp. RatingFace to FaceFlange DrillingButt Weld EnSocket Weld EndScrewed End

: BS 1873 / BS 5352 / ANSI B 16.34: BS 6755 Part I: ANSI B 16.34: ANSI B 16.10 / DIN STD.: ANSI B 16.5 / BS 10 Table / IN / IS Std. : ANSI B 16.25: ANSI B 16.11: ANSI B 1.20.1 / ANSI B 2.1 (BSP/NPT)

» Quarter Turn » Light Weight » Concentric, Single, Double & Triple Offset» EPDM / Metallic Seating » Operation Manual & Actuator

Butterfly Valve

Design Features

Specifications & Standards

Valve Design Pressure TestingPressure Temp. RatingFace to FaceFlange Drilling

: BS 5155/ API 609/ AWWA C504 / EN 593: BS 6755 Part I / API 598: ANSI B 16.34: ANSI B 16.10 / DIN STD.: ANSI B 16.5 / BS 10 Table / IN / IS Std.

Valve Size & Class

Our Esteemed Customers

And Many More....

Plot No. G - 505, Road - B,Kishan Gate, Lodhika G.I.D.C.,Metoda - 360 021Dist. Rajkot, Gujarat - India

+91 2827 287257+91 98796 06111info@reliablevalves.comwww.reliablevalves.com