Click here to load reader

COMPANY PROFIL PT.GLOBAL 2 ACCESS SERVICEglobaltoaccess.com/resources/images/ExtraFiles/G2AS-Profil-Oil-Gas_Nuzul.pdfPAINTING, BLASTING, CLEANING WINDOW, WELDING, FITING, ... Surat

Embed Size (px)

Citation preview

  • 1

    COMPANY PROFIL

    PT.GLOBAL 2 ACCESS SERVICE

    Phone: +62-778-7432501

    E-mail: [email protected]

    [email protected]

    Contact Person:

    Nuzul Panca Putra : +6282173606122

    Ruko TUNAS REGENCY Blok A1 / 12

    Sagulung Batam 29433

    PT. GLOBAL 2 ACCESS SERVICE

    PT.GLOBAL 2 ACCESS SERVICE

    ROPE ACCESS SPECIALIST INSPECTION NDT, LIFTING GEAR

    INSPECTION, PAINTING, CLEANING WINDOW, BLASTING,

    WELDING, FITING, MAINTENANCE and REPAIR OUT DOOR

    SERVICES

  • 2

    RESUME OF COMPANY

    Company Name PT. GLOBAL 2 ACCESS SERVICE

    Type of Company ROPE ACCESS SPECIALIST INSPECTION NDT, PAINTING, BLASTING, CLEANING WINDOW,

    WELDING, FITING, MAINTENANCE & REPAIR OUT

    DOOR SERVICES

    Address Ruko Tunas Regency Blok A1 / 12 Sagulung,

    Batam - Indonesia 29433

    Telephone Number +62-778-7432501

    Contact Person Nuzul Panca Putra : +62 82173606122

    Legalization Surat Pengesahaan Badan Hukum Perseroan

    oleh Dephukam RI no. AHU-

    52855.A.H.01.01.Tahun 2011

    Surat tanda daftar perusahaan dari Dinas Perin-

    dustrian, Perdagangan, Energi dan Sumber

    Daya Meneral kota Batam no.

    33.10.1.81.10166

    Surat Izin Usaha Perdagangan (SIUP) Kecil

    oleh Dinas Perindustrian, Perdagangan, Energi

    dan Sumberdaya Mineneral kota Batam no.

    01801/Perindag-BTM/PK/XI/2011

    Surat Keterangan Terdaftar wajib pajak oleh

    Kementrian Keuangan RI no.

    03.188.830.8-215.000

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 3

    ABOUT PT. GLOBAL 2 ACCESS SERVICE

    PT. Global 2 Access Service (G2AS) is a specialist rope access company. Established in July 2011, we have built our company on being able to provide affordable access solutions to complex problems. The company has have employees with experience in all aspects of high level works. Consequently we are in a position to respond comprehensively to any custom-ers needs. Based in Batam, we are office in Ruko Tunas Regency blok A1 / 12 Sungai Binti Kec. Sagulung, Batam, Indonesia 29434. We are situated close to the local network for nation-wide mobilization. We are also available for international work. We have a full time quali-fied workforce to suit a number of specialist access skills. Our aim is to give total customer satisfaction. This means providing a quality service while causing the minimum amount of disruption to your daily business. G2AS provides: All our customers with a quality and value for money service A rapid response capability A demonstration of rope access at your office or site Full Health and Safety pack our teams All our personnel are independently trained and assessed by the Industrial Rope Access

    Trade Association (IRATA) All our supervisors are qualified IRATA Level 3 and first aid trained. Our safety installers Our anchor bolt installation team are all independently trained and assessed and are

    authorized installers of anchor bolts Industrial rope access techniques can change your whole approach.

    High or awkward repair and maintenance work is disruptive, expensive and as a rule incon-venient to everyone concerned. Used inside or outside your property, rope access tech-niques allow work to start immediately. Rope access takes away the disruption factor nor-mally associated with other forms of access such as scaffolding and cradles etc. In situa-tions where access is difficult however, our trained and experienced operatives can employ competently a number of other solutions. These can include high quality extendable lad-ders, static towers, abseiling or hydraulic platforms (cherry pickers).

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 4

    VISION

    Zero accident The best for customers The best for company

    MISSION

    G2A missions are services specialist rope access supply whit access solutions to complex problems and minimum risk whit safety. The reason for this success is simple, it's ex-tremely safe, cost effective and very efficient, compared with traditional access meth-ods such as scaffolding. Also the time it takes to put together is usually minutes unlike the traditional methods which often take hours or days. The equipment is very light-weight and portable which makes it easier to reach those awkward places, which would be impossible to get to use other access methods. A G2A Health and Safety Officer will carry out a detailed risk assessment and compile a safe system of work prior to work commencing. They will manage the Health and Safety aspects of the job and will pre-pare a site file which will include all the information required for the project from start to completion. G2A Teams consist of highly trained and experienced personnel, who are all experienced in the rescue and evacuation of persons. All our teams are supervised by an IRATA Level 3. All G2A Technicians are IRATA trained and certified. The teams are lead by a Level 3 Supervisor who wills co-ordinate the task and liaise with the clients. The IRATA guidelines we adhere to have been commended by the HSE. All equipment is subject to stringent inspection, logging and maintenance systems and conforms to the relevant European standard.

    STRUCTURE OF COMPANY The main line structure of company as following:

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

    Director & CEO

    Nuzul Panca Putra

    Managing Director

    Rachmad Susilo

    Director of Business

    Development

    Agus Chaliq

    Consultant & Advisor

    Coating Painting

    Lindung Silalahi

    NDT Level III

    Venkatesh Pinnoju

    Project Supervisor

    & Coordinator

    Zulkifli (IRATA L3)

    Employees

    IRATA Level III

    Novri Zulistedy P

    Employees

    IRATA Level II

    - Elia Kombado

    - Elmi Talakua

    Employees

    - 6 person IRATA L1

    with Multi skill

    - 12 person IRATA L1

    welder, Fiter, NDT

    and other qualification

  • 5

    INDUSTRIAL ROPE ACCESS

    What is Industrial Rope Access? Industrial Rope Access is a proven method of achieving a safe work position at height or in areas of difficult access. It was initially developed from techniques used in caving to answer the need for a simple, safe and adaptable means of access with its first large scale use being for inspections on the oil and gas platforms of the North Sea. As its value as a work solu-tion grew rope access has also developed onshore where it is to be seen undertaking all manner of work from high-rise window and facade cleaning and general maintenance to repair, geotechnical and inspection work on some of the world's most iconic structures. Through IRATA International - the only worldwide association in the sector - rope access companies have delivered: an exemplary safety record based on a commitment to thorough training and diligent

    operational procedures a complete service that usually removes the need for the involvement of the majority

    of other access machinery or work equipment a minimal environmental footprint and the ability to work without disrupting public

    access or other work nearby The main features of rope access in operation are: the IRATA rope access worker works from two ropes - a working rope and a back-up,

    safety rope - and is permanently attached to both each rope has a separate anchorage point in the unlikely event of the working rope becoming damaged or unusable, the safety

    rope prevents a fall to prevent accidental dropping all tools of a suitable weight are attached to the tech-

    nician at all times; heavier items are independently suspended. a minimum of two technicians are required for any job so as to enable mutual surveil-

    lance - an extra safety feature all IRATA technicians receive extensive training and independent assessment and are

    required to undergo re-training every three years raining includes rescue procedures even though IRATA has an unrivalled record of safe

    working all equipment is regularly inspected and well maintained all IRATA training and operational work is conducted in line with Association Guide-

    lines, wherever in the world it is conducted these Guidelines have been endorsed by the Health and Safety Executive

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 6

    Where is industrial rope access used? There are six main areas of work undertaken by IRATA rope access companies:

    Inspection/Testing of Structures Structural Surveys Non-Destructive Testing (NDT)

    Various Maintenance and Repair Localized Concrete Repair Sealant Installation and Re-instatement A Secondary Fixings Replacement Cladding and Glazing

    Cleaning and Painting Jet spray, grit blasting and three-tool method Spray Painting Roller brush Painting Full surface Preparation

    Facilities Management Building Services General Window Cleaning Glazing Inspection Replacement and Repair Services Repair Fitting and Maintenance Pest Control Faade Survey, Coating, inspection and maintenance Banner and Sign Erection Art work installation, including Christmas lights and decoration installation.

    Geotechnical/Civil Engineering Permanent Rock Anchorage Soil Nailing Sprayed Concrete Rock fall Prevention Meshing Pressure Pointing

    Film industry To provide support for cameramen and actors. The same is true for photographers Furthermore, rope access techniques are used for systems installation such as antennas, transceivers, weather stations

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 7

    What are the benefits of rope access? There are many benefits speaking for rope access. Unlike traditional access methods, cus-tom rope access solutions can be designed to fit various applications. Among other benefits, rope access is:

    Versatile - rope access professionals can apply the techniques to a wide variety of environments, from confined-space pen stocks to tower structures to complicated steel installations.

    Cost-effective - rope access is very economical. Because fewer personnel can accomplish faster comple-tion it means minimal downtime which effectively means lower costs.

    Efficient and quick - rope access systems are installed and dismantled quickly and require fewer personnel than traditional access methods. Less interference with other facility operations means less disruptions and minimized downtime.

    Environmentally friendly - rope access techniques and equipment has minimal effect on the surrounding environ-ment compared to traditional access methods.

    Safe - independently certified rope access technicians uphold an exceptional safety record which makes it one of the safest jobs in the whole construction industry.

    Manpower qualification need: IRATA rope Access Level 1,2,3 ECT/UT/MT/PT ASNT/PCN Level 2, Lifting Gear Inspection & other qualification

    Equipment for inspection NDT Ultrasonic Testing set, Eddy Current Testing set, Magnetic Particle test, Dye Penetrate test set.

    Ultrasonic Dye Penetrant Magnetic Particle

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

    Eddy Current

  • 8

    TOOLS and EQUIPMENTS ROPE ACCESS

    Carabineers Fall Arrester Body Harness

    Rope Descanter Helmet

    Pulley Ascenders Shunt

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 9

    Inspection/Testing of Structures, Maintenance and Repair

    Cleaning and Painting

    GALLERY AND PHOTO G

    LOB

    AL 2

    AC

    CESS SER

    VIC

    E

  • 10

    GALLERY AND PHOTO Facilities Management Building Services

    PROJECT BP TANGGUH LNG, BINTUNI, JAYAPURA, INDONESIA

    Task: Assist mechanical job for shutdown (TAR-4) project from April- May 2013

    Removing jumping rope at VR-B plaform

    Visual inspection cubing hydraulic line

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 11

    PROJECT

    BP TANGGUH LNG, BINTUNI, JAYAPURA, INDONESIA

    Greasing at Loading Arm

    Repainting on Platform

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 12

    PROJECT

    BP TANGGUH LNG, BINTUNI, JAYAPURA, INDONESIA

    Remove rusty and corrosion on pipe surface wellhead flow line

    Repainting on Braces support of crane boom rest

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 13

    PROJECT

    BP TANGGUH LNG, BINTUNI, JAYAPURA, INDONESIA

    Marking SWL on JIB crane

    Touch up painting on structure platform (Maintenance)

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 14

    PROJECT

    BP TANGGUH LNG, BINTUNI, JAYAPURA, INDONESIA

    Touch up paint on the spot

    Structure Flare inspection

    CONOCO PHILLIPS, NATUNA, INDONESIA

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 15

    PROJECT

    NDT INSPECTION

    VESSEL INSPECTION

    PIPING INSPECTION WITH LOG RANGE UT

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE

  • 16

    PROJECT

    NDT INSPECTION

    PIPING AND RISER INSPECTION

    RIG CLEANING WITH PRESURE

    GLO

    BA

    L 2 A

    CC

    ESS SERV

    ICE