Embed Size (px)
Citation preview
The water leader
COMPANY FILE
THE WATER LEADER
The water leader
COMPANY FILE | THE WATER LEADER
03
WHO WE ARE
REMOSA was set up in Súria (Barcelona) in 1981, dedicating itself to innovation and progress. It has very good domestic and
international coverage, both due to its team of 67 staff and partners in Spain, France and Portugal and to the logistics and
manufacturing centres it has in Súria (Barcelona) and Noblejas (Toledo).
REMOSA makes products for waste water treatment, water regeneration and liquids storage.
Its engineering department with its own research team and two production plants with the most advanced technology offer a
comprehensive design, development and start-up service for urban waste water treatment solutions.
LOGISTICS AND PRODUCTION
COMPANY DETAILS
Súria Factory Noblejas Factory
RESOURCES
PRODUCTION
TOTAL INDUSTRIALADMINISTRATION
AND LOGISTICSSALES TECHNICIANS MANAGEMENT
FACILITIES18,350 m2 5,300 m2 13,050 m2
H.R.67 32 7 20 6 2
TONS TRANSFORMED 750 tons
STORAGE CONTAINERS 12,500 units
WATER TREATMENT SYSTEMS 4,850 units
SALES 6,300,000 Euros
WHERE TO FIND US
The experience that REMOSA has accumulated since 1981 has given it a significant presence in the domestic and international
market, an extensive sales network formed by professionals with ample experience in the sector and technical and sales assistance
for all of its customers.
The three big markets we focus on are SPAIN, FRANCE AND PORTUGAL, by we are present in a further 14 countries:
Germany USA
Andorra Lithuania
Algeria Morocco
Angola Netherlands
Belgium Dominican Republic
Chile Russia
Ivory Coast Tunisia
Costa Rica Zaire
Installation of a Rox 400 in the Varela polo club
in Santo Estevão (Portugal)
Compact Filter Tank for 200 residents in Cáceres
(Extremadura)
Installation of a Rox 250 in Toulouse (France)
The water leader
COMPANY FILE | THE WATER LEADER
05
CONCERN FOR THE ENVIRONMENT
Through its work, REMOSA promotes the environment, both in-house and in
society as a whole.
Proof of this is our ISO 14001:2004 certification and the renewal of the
ISO 9001:2000, which certifi es REMOSA’s purpose as the “design and
manufacture of liquids treatment and storage systems, in order to improve
and conserve the environment”.
R&D+i DEVELOPMENT
RESIMA guarantees the utmost professionalism, quality and innovation to its customers. Formed by a highly qualified team and with
its testing plant, RESIMA tests and researches new products and applications for our entire product range.
Just round the corner from our headquarters is the pilot plant and laboratory dedicated to the testing and characterisation of
waste water treatment systems. The main aim of this Project is to STUDY, IMPROVE AND OPTIMISE our products’ treatment lines.
The following centres participated in this Project.
CENTRE FOR INDUSTRIAL TECHNOLOGICAL DEVELOPMENT (CDTI), which
forms part of the Ministry of Tourism and Industry.
CTM technology centre.
UNIVERSIDAD POLITÉCNICA DE CATALUÑA (UPC).
The water leader
COMPANY FILE | THE WATER LEADER
07
SIREA
SOSTAQUAHISTORY
Setting up of the R&D+i department in September 2004 Start-up of the Pilot Plant. November 2005
- Pioneer Pilot plant- Water quality parameter testing laboratory- Photovoltaic energy production system
R&D+i PROJECTS
DIDEP 2004-2006 project: Design and Optimisation of Urban Waste Water Treatment Systems
SIREA project (2006-2008): Innovative Urban Waste Water Treatment and Recycling System using Membrane Bioreactors (MBR)
SOSTAQUA project (2007-2011): Technological Development towards the Self-sustainable Urban Water Cycle
SIREA PROJECT
Development of compact Systems for recycling of urban waste water using membrane technology
MBR: hybrid process combining a biological treatment process (bioreactor) with a physical separation process using membranes
Advantages- Improved effluent quality, both in environmental and in sanitary
terms- Elimination of decantability problems- Greater concentration of biomass in the reactor, enabling:
– Elimination of slower degrading particles- Reduction of sludge production- Reduction of the reactor size
SOSTAQUA PROJECT
Set of large-scale integrated industrial research projects of a strategic nature and a wide scientific and technical scope
Its aim is to carry out R&D+i in a sustainable supply and comprehensive water cycle management context
Use of membrane technology for the treatment of water other than urban waste water
Standardisation of compact treatment systems in FRP Fields of application
– Greywater treatment– Other treatments
Development of Research and Development tasks 4-year project subsidised by the CDTI
SOSTAQUA PARTICIPANTS
AGBAR GROUP Degremon, Dow, Ciments Molins, Clabsa, Labaqua, Solvay,
Emuasa, Sener, Canaragua, Cric, Auma, Enviros, STC, Sineria
PRODUCTS
REMOSA’s four large subsets are:
HOUSEHOLD WASTE WATER TREATMENT HYDROCARBON SEPARATORS GREYWATER RECYCLING SYSTEMS LIQUIDS STORAGE
With these four subsets, REMOSA provides optimum waste water treatment and liquids storage solutions for all its customers.
The launch of the new line of greywater recycling system represents a leap forward towards ecological efficiency, recycling
household and waste water for the WC, watering and outside cleaning.
The water leader
COMPANY FILE | THE WATER LEADER
09
TRANSFORMATION PROCESS
All our systems are manufactured in FIBREGLASS REINFORCED PLASTIC (FRP). This material is
ideal due to its lightness, rigidity, high chemical resistance, good vibration absorption, dimensional
stability and durability.
REMOSA offers a wide range of systems, both in terms of size and format. All follow a standardised
manufacturing process guaranteeing the customer fast delivery. Depending on their size, systems
follow two manufacturing processes:
- Manual process: for systems of up to 6,000 litres. This is a manual laminating process.
- Automated process: For systems of over 6,000 litres, the mechanical resistance requirements
require use of an automated process called filament winding.
ROX Coalescent Hydrocarbon Separator with Seal
WASTE WATER TREATMENT
Water has now become the highest valued of the natural elements in terms of both its quantity and its quality. This fact, along with
increasing environmental awareness, have led to any dumping of waste water and products likely to pollute continental waters
requiring an administrative authorisation.
Within this environmental and legislative framework, REMOSA provides a wide range of
solutions to meet current legislation.
Broadly speaking, we provide both total oxidation and natural biological systems capable
of treating the household waste water equivalent of from 4 up to 2,000 residents.
The water leader
COMPANY FILE | THE WATER LEADER
11
HYDROCARBON SEPARATORS
The REMOSA Hydrocarbon Separators line was designed to treat waste water that may be polluted with mineral oils. These systems
are required in service stations, garages, multi-storey car parks, car washes, etc.
In order to meet all the market’s needs, REMOSA offers hydrocarbon separators with flow rates that vary between 1.5 and 250
litres/sec.
GREYWATER RECYCLING SYSTEMS
Water is becoming an increasingly important and an increasingly scarce resource, so why not use the water from our houses again,
extending the life of this natural resource, which would bring very positive environmental and economic results.
REMOSA’s regeneration systems treat waste water of any origin, be it faecal or from basins, showers, etc., for subsequent use
for watering, outside cleaning or the WC.
REMOSA regeneration systems have a number of benefits:
Saving on drinking water consumption Recycling of water for watering, outside cleaning and WC tanks Compact system: easier to assemble, less costly to install Environmentally friendly
The water leader
COMPANY FILE | THE WATER LEADER
13
LIQUIDS STORAGE
REMOSA’s liquids storage line has a wide range of sizes and formats, with buried, surface, vertical and horizontal systems for
liquids storage of from 50 to 150,000 litres.
Our customers can choose from tanks, vats, rainwater collectors, WC tanks, fuel tanks, fire-fighting systems, etc.
The water leader
The water leader
CENTRAL OFFICES AND FACTORY 1
ABADAL INDUSTRIAL ZONE
Molí de Reguant, 2
08260 Súria (Barcelona), Spain
FACTORY 2
Noblejas (Toledo), Spain
T. +34 902 49 06 49 / +34 93 869 62 65
F. +34 93 869 69 86
www.remosa.net
REMOSA is a member of:
