Upload
others
View
6
Download
1
Embed Size (px)
Citation preview
Company
engineering design Khorasan Powder
metallurgy
Established in 1994/95
Khorasan powder metallurgy company in 1994/95 under the
management of Mr. Hussein Zabul Abbasi was founded and
since then it has extensive activities in the field of metallurgical
production is carried out primarily Affairs
During the past few years will continue.
The objectives are as follows:
- Increase the level of management quality
- Human Resource Development
- Increase the quality and quantity and diversity of production
- Research projects
Design and Manufacturing vertical gas atomizing laboratory (1994)
Design and construction of horizontal gas atomizing line to produce copper ,Tin,
lead, zinc powders,
(1995)
Design and Manufacturing industrial production vertical gas atomizing line for
the production of aluminum powder (1998)
Design and construction of horizontal atomizing line for the production of pellets
shot blast and lab setup (1999)
design water atomizing line for the production of ferrous and nonferrous metals
powder (2003)
Design and construction line piece production by Powder Metallurgy (2005)
Design and construction line of aluminum flake powder production by dry ball
milling (2014)
Installation of spherical aluminum powder production line using nitrogen gas
atomizing
The production capacity of powdered copper and its alloys by gas Atomizing at
a capacity of 300 tons per year
production capacity of powdered copper and its alloys by water Atomizing at a
capacity 300 tons per year
production capacity of aluminum powder by air atomization at a capacity of
1000 tons per year
production of spherical aluminum powder by vacuum gas atomization at a
capacity 1000 tons per year
production capacity of aluminum powder Flack by dry ball milling at a
capacity of 500 tons per year
production capacity powders, lead and zinc and tin a total capacity 500 tons per
year
Non-ferrous metal powder production by water and gas atomizing at a capacity
500 tons per year
Ferrous powders
iron alloy powder
Ferro silice
Ferro Manganeses
Iron powder
Irregular spherical
Non-ferrous powder
tin
Brass
bronze
aluminum
spherical
Al-S-5
Al-S-10
Al-S-20
Al-S-100
flake
Al-F-101
Al-F-102
Al-F-103
Irregular
Al-I-45
Al-I-100
Al-I-420
Al-I-+63-250
paste
lead
copper
zinc
TECHNICAL DATA SHEET Flake Aluminum Powder
Application :
In aerated concreat products, In
pesticides, In corrosion resistant paint ,
In chemical catalysts, In decorative paint
,In chemical industry.
Production method: Dry milling
Type Purity
Min
(%)
Apperent
Density
(g/cm3)
Particle Size
Distribution
D50(µm)
Lubri
cant
(%)
Water
Covering
(cm2/g)
Gas Reactivity
Test
Al-F-01 97 0.15-0.2 22 ± 5 2-3 9000-10000 90 ml in 4-6 min
Al-F-02 97 0.23-0.28 30 ± 5 2-3 5000-7000 90 ml in 7-9 min
Al-F-03 97 0.3 + 40 ± 5 2-3 3000-5000 90 ml in 10-12 min
TECHNICAL DATA SHEET Aluminum Paste
Type Pigment
content
(%)
Solvent
content
(%)
Particle Size
Distribution
*D50(µm)
Apperent
Density*
(g/cm3)
Water
Covering*
(cm2/g)
Gas Reactivity
Test *
Al-P-101 60-70 30-40 16 ± 1 0.15-0.2 9000-10000 90 ml in 4-6 min
Al-P-102 60-70 30-40 29 ± 2 0.23-0.28 5000-7000 90 ml in 7-9 min
Al-P-103 60-70 30-40 39 ± 1 0.3-0.37 3000-5000 90 ml in 10-12 min
In seption criteria marked * are based upon powder analysis
Application :
In aerated concreat products., In Printing inks
solvent based , In Master batch, In Water based
industrial paints, In Solvent base industrial
paints, In Screen print, In Water base printing
inks
Production method: Wet milling
TECHNICAL DATA SHEET , Air Atomized Aluminum Powder
Type Purity
Min(%)
Apparent
Density
(g/cm3)
Particle Size
Distribution
D50(µm)
Al- I--45 99.75 0.9-1.1 31.72
Al- I-100 99.75 0.9-1.1 55.28
Al- I+63-250 99.75 0.95-1.1 100.7
Al- I-420 99.75 0.9-1 65.12
Application
Aluminum powder mainly used in
industry such as chemical industry,
military industry, metallurgy industry,
explosive , fire works industry, welding
and ferroalloy industry
Production method: Gas Atomizing
TECHNICAL DATA SHEET, Spherical Aluminum Powder
Type Purity
Min(%)
Apperent
Density
(g/cm3)
Particle Size
Distribution
D50(µm)
Al-S-5 99.75 0.6 ± 0.1 2.5 ± 0.1
Al-S-10 99.75 0.8 ± 0.1 6 ± 0.5
Al-S- 30 99.75 1.1 ± 0.1 17 ± 5
Al-S-100 99.75 1.1 ± 0.1 45 ± 7
Application :
It is mainly used in Pyrotechnics,
military, Master batch , fuel source,
ofense (Rocket Fuel),،paint industry,
Photovoltaic
Production method:
Vaccum Gas Atomization
TECHNICAL DATA SHEET, Bronze Powder
Type Purity
Min(%)
Apparent
Density
(g/cm3)
Particle Size
Distribution
D50(µm)
BRN-I-63 90:10 4.5-5.15 24.02
BRN-S -63 90:10 4.5-5.15 24.02
BRN-S- 150 90:10 3.8-4.7 95.30
BRN-I-250 90:10 3.8-4.7 97.91
Application:
Bronze powder with spherical shape is used
in making bronze filters, produce high
density metallurgy component,bronze color
and thermal spray method. Also irregular
Bronze powder was used as filler in
plastics, chemical industry, welding and
self lubricant bronze bushes
Production method: Gas Atomizing
(spherical) and water atomizing (Irregular)
TECHNICAL DATA SHEET, Brass and Ferrosilicon powder
Type Purity
Min(%)
Apparent
Density
(g/cm3)
Particle Size
Distribution
D50(µm)
FeSi-75 85:15 3-3.5 45.21
FeSi-45 85:15 3-3.5 27.72
BRA-150 90:10
3-3.6 95.94
BRA-350 90:10 3-3.6 143.5
Application
Ferrosilicon (FeSi) powder was used for
Manufacture of welding electrode,
Powder Metallurgy and densemedium
separation processes. Also Brass powder
was applied in produce brass lots, cut
diamond, clutch and brakeinings and
produce gold bronze pigments
Production method: Water Atomizing
TECHNICAL DATA SHEET, Lead and Tin Powder
Application
Tin powder mainly used in metallurgy for
production of component with low
expansion, plastics, chemical industry,
friction application and produce shiny/polish
alloy.
Lead powder used as Protective Shield of x-
ray penetration, Military application, Nuclear
Power Industry, brake pads and chemical
industry
Production method: Gas Atomization
Type Purity
Min(%)
Apparen
t Density
(g/cm3)
Particle Size
Distribution
D50(µm)
Sn-45 99.9 4.1-4.7 20.42
Sn-63 99.9 3.8-4.5 33.68
Pb-45 99.9
5.2-6.9 18.04
Pb-100 99.9 5.2-6.9 29.80
TECHNICAL DATA SHEET , Copper Powder
Application:
Spherical Copper is used in coated thermal
spray technique, plastics, control of X-Ray
diffusion, Heat exchanges and Production cut
diamonds. Also irregular copper powder was
used in brake and clutch industry
Production method:
Gas Atomizing (spherical) and water
atomizing (Irregular
Type Purity
Min(%)
Apparent
Density
(g/cm3)
Particle Size
Distribution
D50(µm)
Cu-S-63 99.81 3.7-4.5 32.86
Cu-I-75 99.81 3.7-4.5 51.41
Cu-S- 45 99.81 3.7-4.5 24.88
Cu-I-150 99.81 3.7-4.5 58.08
Technical Information TECHNICAL DATA SHEET , Magnesium Powder
Type Purity
Min(%)
Apparent
Density
(g/cm3)
Particle Size
Distribution
D50(µm)
Mg -75 99 0.41-0.72 64.16
Mg +75-315 99 0.67-0.82 144.8
Mg +300-500 99
0.74-0.87 203.5
Mg +500-1000 99 0.76-0.88 421.7
Application:
Magnesium powder was used as a
Grignard reagent, reducing reagent for
production elemental metal from oxids
(Metallothermic compound reduction),
Commercial and military Pyrotechnics
effects, produce firecracker, welding
core wire, ferroalloy production and
magnesium carbon bricks.
Production method: Machining
Technical Information TECHNICAL DATA SHEET , Iron Powder
Type Purity
Min(%)
Apparent
Density
(g/cm3)
Particle Size
Distribution
D50(µm)
Fe -63 99.85 3.6-4.7 57.90
Fe-100 9.85 3.6-4.7 101.4
Fe -150 99.85
3.6-4.7 112.8
Fe -250 99.85 3.6-4.7 133.5
Application:
Iron powder was used for Manufacture
of welding electrode, Powder Metallurgy
clutch plate and brake pad, Cap crank
bearing and sliders.
Production method: water atomizing
Address:
No.270-koshesh shomaly 19-industrial city of
mashhad- mashhad- Iran
Post Code: 9358187754
Cellular phone : +989021209943
Tell: 051-032453019-20
Fax: 051-32454378
E-mail: [email protected]