Upload
nabeel-hassan-ali
View
225
Download
0
Embed Size (px)
Citation preview
7/27/2019 CompactCom E
http://slidepdf.com/reader/full/compactcom-e 1/4
CompactCom
Compact Plug-in interfaces - the next
generation product for embedded industrial
commuication
► Profibus
► DeviceNet► CANopen► Profinet-IO► EtherNet/IP► Modbus-TCP► PowerLink ► CC-Link ► Modbus-RTU► RS232► RS485►
USB► Wireless
ANYBUS EMBEDDED PRODUCTS
7/27/2019 CompactCom E
http://slidepdf.com/reader/full/compactcom-e 2/4
ANYBUS COMPACTCOM
Active and Passive
modules provide a
complete communication
solution.
The growing use and fragmentation of Industrial Ethernet and Fieldbus communicationmakes it even more difficult to decide whichnetworks to support when you release a new product. Is only Profibus enough for you or doyou need to support several fieldbuses? What
about Ethernet, which industrial versions willbe the right choice? Should you have USB orRS232? Will your customers ask for wireless like WiFi or Bluetooth? Is there any new technology coming up?
Where do you intend to sell your product, whichnetworks are used in different countries anddifferent industries? What about conformanceand certification? There are many factors that need be consideredbefore selecting the right communicationinterface for your product. With Anybus-CC youhave full flexibility and can choose from a widerange of connectivity solutions for your product.
Gone are the days of a long and complex in-design for network connectivity. The flexibility
of the Anybus-CC is unrivaled. You canchoose from modules supporting Fieldbusnetworks, any Ethernet protocol, USB, Wirelessor even a Serial interface without having tomake any hardware or software changes to yourproduct. With fewer requirements to size, cost,
interface methods and performance, the Anybus-CC reaches an even wider target marketfor automation devices.
It can easily be integrated into traditional devicessuch as PLC’s, Drives, Robot Controllers, WeighScales, HMI’s, but thanks to its small size isnow also ideal for Valve Manifolds, Motion and Temperature Controllers, Sensors, I/O Blocksand Bar Code Readers, just to name a few
applications.
Anybus Compact-Com, (Anybus-CC), has been designed to meet modern network
connectivity requirements, featuring low price, small size and an easy integration
process. At the same time, Anybus-CC provides the performance and functionality
required to meet the communication demands of HMI’s, robot controllers,drives, valve blocks, instruments, scales and many more industrial products.
The Anybus-CC module uses the CompactFlash ® form factor and connector. The
module is completely covered by a robust plastic housing, which enables easy
handling and installation at any time in the logistic chain between manufacturer
and end customer.
Innovative design and
functionality - providing
optimal flexibility.
With its unique CompactFlash® connection the Anybus-CC
simply plugs into the host application.
There are two versions of Anybus-CC modulesavailable.
Active Modules: Handles the full protocolstack up to Layer 7, suitable for networks such asProfibus, EtherNet/IP or CC-Link. Allnecessary software and hardware is included onthe active Anybus- CC modules and they can beinterfaced through an asynchronousserial interface or via a parallel interface. Bothinterface alternatives support the same data
exchange methods, functionality and features.
● 8-bit 2kB Dual Port Ram Parallel Interface
● Asynchronous half duplex SCI Serial Interface
Passive Modules: Handles basic
communications tasks such as converting serial telegrams to any supported network. It issuitable for USB, Bluetooth or as an EthernetSerial Server.
● Passive SCI Serial Interface (Transparent pass-through)
Link Module: The Link Module conceptconsists of an active Anybus-CC moduleconnected to an external converter that enablescommunication on the selected network. This
is a way to use the Anybus-CC concept alsofor legacy networks such as Modbus Plus orInterbus.
ANYBUS EMBEDDE D PRODUCTS
Designed to meet modern network connectivity require-
ments, featuring low price, small size and easy integration.
Take a closer look at Anybus CompactCom!
The Active & Passive family featuring Fieldbus, Ethernet, Serial,USB and Wireless modules.
Anybus Communicator as
as the external converter Active Anybus-CC
Link module
RS-232
7/27/2019 CompactCom E
http://slidepdf.com/reader/full/compactcom-e 3/4
Available for:
Profibus
DeviceNet
CANopen
Profinet-IO
EtherNet/IP
Modbus-TCP
PowerLink
CC-Link
Modbus-RTU/ASCII
RS-232
RS-485
USB Wireless
C O M P A C T - C O M
Ideal applications for ABCC integration
LED indicators
Standard 50-pin CompactFlash connector
On-board DC/DC,
opto couplers and
physical layer
● Cost optimized communication
modules for nearly all industrial
applications
● Supports all major Fieldbus
Networks, Industrial Ethernet
Protocols, RS232, RS485, USB
and Wireless
● Plug-in CompactFlash® connection
to host product
● Robust housing for easy handling
and optimised logistics
● Low power consumption
● Very small and compact size
● All network hardware and software
are integrated in the module
● On-board high performance RISC
network microprocessor
● Parallel Dual Port Ram interface for
maximum performance and data
throughput
● Serial asynchronous interface with
configurable baudrates
● Starterkit available including driver
software and demo application
● Size: 52 x 50 x 22mm (L x W x H)
2.04 x 1.97 x 0.86” (L x W x H)
● Integrated PE (Protected Earth)
protection
● Power Supply: 3.3V
● Temp: Operating 0°C to + 70°C
Non-Oper. -40°C to + 85°C
● EMC Compliance: CE Marked
● UL&cUL Compliance: Pending
● RoHS conformance
● Tested and verified for Fieldbus
and Network conformance
KEY FEATURES
TECHNICAL SPECIFICATION
Measuring Devices
RISC network
processor plaform
3.3V design
Standard network specific front and connectors
PE-connection integrated
with module fastening
The module fastening is handled by
the module mehanics; no additional
mounting screws are required.
The only thing that needs to be
considered is the fastening holes in
the PCB. The PE (Protected earth)
connection is made on module
insertion, via a metallic clip at the
bottom of the module.
1.6mm PCB
Locking mechanism
Robust frame cover
with integrated
fastening
ABCC slides onto the PCB
The screw is tightened and the
ABCC is locked into position
Motion Controllers
Valve Manifolds
PLC’s
Drives and Micro Drives
HMI’s
7/27/2019 CompactCom E
http://slidepdf.com/reader/full/compactcom-e 4/4
Network specific supported features - Anybus CompactCom
Profibus-DPV1-AB6200 DeviceNet - AB6201 CANopen - AB6202 Profinet-IO - AB6206 Modbus-TCP- AB6204
• Up to 400 bytes of I/O data
• Optional User Parameter Data
support
• Set_Slave_Add support
• ADI access via DPV1 read/
write services
• Device identity customization• Automatic baud rate detection
• Generic and Profibus specific
diagnostic support
• Galvanically isolated bus
electronics
• Generic GSD-file provided
• CIP Parameter Object Support
• Explicit messaging
• Baud rate: 125-500 kbit/s
• UCMM capable
• Bit-strobed I/O
• Change-of-state / Cyclic I/O /
Polled I/O
• Expansion possibilities via CIP
forwarding
• Customizable identity object
• Automatic baud rate detection
• Galvanically isolated bus
electronics
• Supports all standard baud rates
• Automatic baud rate detection
• Supports LSS
• Customizable Identity
Information
• Up to 32 TPDO’s & 32 RPDO’s
(Corresponds to a total of 256bytes of Process Data)
• Up to 16383 ADI’s can be
accessed from the network as
Manufacturer Specific Objects.
• Diagnostic support
• Galvanically isolated bus
electronics
• Profinet Real-time functions
• Baud rate: 100Mbit/s
• Max 256/256 bytes of process
data IN/OUT
• Support for acyclic record data
• Generic GSD-file provided
• Transformer isolated Ethernet
interface
• Available 2006
• IP-address settings configurable
through application interface,
webpage, DHCP or via HMS
config tool
• Baud rate: 10/100 Mbits/s
• Modbus TCP Class0, class1 &
partial class2 slave functionality
• Transformer isolated Ethernet
interface
• Available Q1 2006
EtherNet/IP-AB6205 PowerLink-AB6210 CC-Link - AB6211 Modbus-RTU-AB6203 RS-232 - AB6207
• IP-address settings configurable
through application interface,
webpage, DHCP or via HMS
config tool
• Baud rate: 10/100 Mbits/s
• EtherNet/IP adapter
• Transformer isolated Ethernetinterface
• Generic EDS-file provided
• Available Q1 2006
• Protocol compliant to IAONA
Real-time classes 3+4
• Address settings configurable
through application interface and
Ethernet services
• Baud rate: 100 Mbits/s
• Transformer isolated Ethernetinterface
• Available 2006
• Total 128 I/O points (bit) and
32 words
• Number of occupied stations: 1-4
• Support profiles for a “Remote
Device”
• Baud rate: 156kbit/s, 625kbit/s,
2,5Mbit/s, 5Mbit/s, 10Mbit/s• Galvanically isolated bus
electronics
• Available 2006
• Modbus RTU slave functionality
with RS232/485 on the fieldbus
side
• Max 256 byte input and 256 byte
output process data
• Optically isolated interface
• Baud rate: 1,2 Kbit/s - 115,2Kbit/s
• Support for Class0, Class1 &
partially Class2 slave
functionality
• Supports both RTU and ASCII
• Available Q2 2005
• Physical layer converter for the
RS-232 communication standard
• Supports any baud rate up to
250 Kbps
• No configuration necessary,
since the module acts only on
the physical layer.
RS-485 - AB6208 USB - AB6209 Wireless Starterkit
• Physical layer converter for the
RS-422 or RS-485
communication standard
• Supports any baud rate up to
10 Mbit
• No configuration necessary,
since the module acts only on
the physical layer.
• Available Q2 2005
• Physical layer converter for
USB communication standard
(USB 1.1 & USB 2.0 full speed)
• Supports any baud rate up to
3 Mbit
• The baud rate is set from the
host computer side
• Software drivers supported
• Available Q2 2005
• Physical layer converter for
wireless communication
standards
• Support standard baud rates and
specific profiles
• Available 2006
The StarterKit provides a quick
and simple way to test the Anybus
CompactCom
A serial hardware adapter for
connection to PC (The adapter
can be used for test setup in PC
environment and for softwaredownload to the CompactCom
Also Included:
• Anybus CompactCom module
1-2 pieces (for selected
fieldbus or passive modules)
• Application connectors
• Anybus CompactCom
mechanical drawings and
manuals
• Anybus CompactCom
application driver software
HMS INDUSTRIAL NETWORKS ABPilefeltsgatan 93-95
SE 302 50, Halmstad
Sweden
Tel: +46 35 17 29 00
Fax: + 46 35 17 29 09Email: [email protected]
HMS INDUSTRIAL NETWORKS INC1925 N.Clybourn, Suite 300
Chicago, IL 60614
USA
Tel: +1 773 404 3486
Fax: +1 773 404 1797Email: [email protected]
HMS INDUSTRIAL NETWORKS GMBHHaid-und-Neu Str. 7
DE 76131, Karlsruhe
Germany
Tel: +49 721 96472-0
Fax: + 49 721 96472-10Email: [email protected]
HMS INDUSTRIAL NETWORKSNara Building II 9F, 2-2-8 Shin Yokohama,
Kohoku-ku, Yokohama-shi, Kanagawa-ken
223-0033, Japan
Tel: +81 45 478 5340
Fax: +81 45 476 0315Email: [email protected]
HMS INDUSTRIAL NETWORKSC/O EFA Automazione s.r.l.
Via S. Aleramo 2, I-20063
Cernusco S/N, Milan, Italy
Tel: +39 0292 113180
Fax: +39 0292 113164Email: [email protected]
www.anybus.com
Anybus® is a registered trademark of HMS Industrial Networks AB, Sweden, USA, Germany and other
countries. Other marks and words belong to their respective companies. All other product or service names
mentioned in this document are trademarks of their respective companies.
Part No: MM0001 Version 1 03/2005 - © HMS Industrial Networks - All rights reserved