Embed Size (px)
DESCRIPTION
6 x 010 Rz 6.3 Rz 6.3 Rz 6.3 Rz 6.3 Rz 6.3 20.5 24 14 10 20 ISO 10243 V Ejector pin 05 - DIN 1530 36 -0.5 Optional keyway machining 16 -0.05 R6 6 x 010 Rz 6.3 Rz 6.3 Rz 6.3 Rz 6.3 Rz 6.3 Mat. 1.2379 - 58±2HRC 20.5 0.5 -0.1 24 20 14 10 4 8 36 -0.5 Ejector pin 05 - DIN 1530 5 -0.1 16 -0.05 Mat. 1.2379 - 58±2HRC 0.5 -0.1 4 8 5 -0.1
Citation preview
www.hales.com.au
Compact Coring UnitM
ou
ldA
ctio
ns
44
Rz 6.3
24
Rz 6.3 Rz 6.3
14
Rz 6.3
R6
Rz 6.3
36-0.05
0.5-0.1
36 -0.5
16-0.05
5-0.1
Optional keyway machining
1424
Rz 6.3
ISO 10243 V
4
Mat. 1.2379 - 58±2HRC
Rz 6.3
10
Rz 6.3 Rz 6.3
Rz 6.3
20
8
6 x 010
Ejector pin 05 - DIN 1530
20.5
010.5+0.5M5 x 25DIN 912
Rz 6.3
24
Rz 6.3 Rz 6.3
14
Rz 6.3
R6
Rz 6.3
36-0.05
0.5-0.1
36 -0.5
16-0.05
5-0.1
Optional keyway machining
1424
Rz 6.3
ISO 10243 V
4
Mat. 1.2379 - 58±2HRC
Rz 6.3
10
Rz 6.3 Rz 6.3
Rz 6.3
20
8
6 x 010
Ejector pin 05 - DIN 1530
20.5
010.5+0.5M5 x 25DIN 912
Mat. 1.2510 – Hardened 55_+2HR CPatented System.
Compact Coring Unit. This unit uses the open and close movement of
the mould to make lateral holes in wall sections of plastic parts. Easy
to assemble and remove from the mould.
Reference
UA.363616
