COMMODITY GROUPS - BUDMA · COMMODITY GROUPS: - Binding materials - Concrete - Walls ... work in conjunction with NIBE ground source heat pumps, the FLM module recycles old, stale

COMMODITY GROUPS: - Binding materials

- Concrete

- Walls

- Elevations

- Heat-insulating and refurbishment

systems

- Shading and ventilation technique

- Beams

- Floors

- Windows

- Winter gardens, patios

- Windowsills

- Doors

- Gates and fencings

- Elevators, escalators, balustrades

- Roofing

- Drainage systems

- Roofer fixtures

- Chimney systems

- Wood in construction

- Stone in construction

- IT for construction

- Construction tools

- Building chemicals

- Auxiliary construction equipment

- Road Infrastructure

- Other

AUTOMATIC CONVEYING SYSTEM

Pneumatic conveying system for pressure silos with integrated conveyor block and automatic

pressure control system.

MORTEC SYSTEM SRI Pav. 3, St. 88

PLASTERIADY 230V POWER

Plastering machine 230V single phase.

MORTEC SYSTEM SRI Pav. 3, St. 88

LUNA TWO–LEVEL SEAT Stable, two–level concrete and wooden seat for use

outdoors as a free–standing block. An outstanding feature

of the product is its modularity. Combining Luna with

other products from the Largo series makes it possible to

create interesting architectural forms in space.

STYL – BET Przedsiębiorstwo wielobranżowe Jurkiewicz i Paradowski sp. jawna Paw. 9, St. 14a

ABSOLUTECAP PAINT IN JUICY COLOURS

Opaque water paint for interior walls with good covering

properties, washable, with excellent white balance and

covering properties and good water vapour permeability.

E C O R S O N - SYSTEMY FARB I TYNKÓW DEKORACYJNYCH Pav. 3, St. 59

K81 ACRYLIC PAINT

Water based matt finish paint which can be thinned out

with water. It is made of acrylic resins. It is perfectly

washable, can be used indoors and outdoors. It creates a

hard, strong and elastic coating that is highly resistant to

stains penetration and dirt and is easy to wash with

common detergents.


SAHARA DECORATIVE PAINT

The Sahara collection consists of a water-based finishing

top coat with metallic pigments, available as silver or gold

base. The effects achieved with this product remind one

of ancient fabrics and are perfectly suitable for decoration

of interior walls in classical and modern environments.


SILOMUR – SOLUTION

A mineral product based on siloxane resins chemically

stable to alkali: adds water repellent properties to treated

surfaces. The applied product does not form a film and for

this reason it protects walls from humidity and lets them

transpire without changing their appearance or colour.


SYSTEM TURGRAN® Advantages of the system:

- excellent thermal insulation thermal (=0.17 W/mK)

- high resistance to fire – uninflammable

- good acoustic insulation acoustic

- “breathing” walls

- shortening of construction time

- possibility to build structures up to 2 storeys high

PRZEDSIĘBIORSTWO WIELOBRANŻOWE WERMAT DARIUSZ DUBECKI Pav. 3A, St.83a

CORTIZO COMPOSITE PANEL

New and efficient structural solutions that are

economical, aesthetic and sustainable for the

resurfacing of building facades. The panels are made of

two sheets of aluminium joined together with

thermoplastic resins.

CORTIZO Composite Panel is composed of an outer layer

of the 3005-H22 aluminium alloy lacquered with PvdF

paint (polyvinylidene fluoride), double coated for

greater resistance to corrosion and aging. The inner

core is composed of thermoplastic resins

(Polyethylene).

ALUMINIOS CORTIZO, S.A. Pav. 3, St. 70

ALUFOX – reflective heat-insulation

- thermal conductivity (NBN B62-201) 0.034 W/mK

- coefficient reflection of radiant heat 85%

- safe during fitting (it does not fall into the eyes or

under a collar)

- easy to install (surface-sewing gun or silicone glue,

scissors and self-adhesive aluminium tape)

- creates a barrier for all physical losses of heat,

especially thermal radiation

- moisture in the air does not influence the heat-

insulation efficiency

ALUFOX Sylwester Sikora Pav. 4, St. 48

ISOBOOSTER®

The latest generation insulating material with thermal

properties unparalleled so far on the market. Confirmed

with European Norms of thermal resistance: R=3.4

(m2*K/In) for 40mm thickness and R=2.4 (m2*K/In) for

24mm (=0.0100÷0.0118). Indispensable in new

constructions and thermomodernization.

PPHU ANAR Pav. 3, St. 2

MATHERMIC®

Mathermic® is a system consisting of ready-made polyurethane modules with embedded

clinker facade tiles, designed as thermal insulation as well as facade cladding, suitable for use

on wooden, concrete and steel structures.

M.A.T. Sp. z o.o. Pav. 3, St. 16

NIBE F1245 NIBE 1245 is a new generation ground source heat pump with integrated hot water heater

(capacity 180 litres). It is easier than ever to get the full benefits of this clean, cost–effective

technology. A modern control unit helps you maintain a comfortable indoor climate. Clear

information about status, operation time and all temperatures in the heat pump are shown

on a large and easy–to-read display.

NIBE – BIAWAR Sp. z o.o. Pav. 15B, St. 11

NIBE FLM The addition of FLM exhaust air module further reduces your heating bills. Developed to

work in conjunction with NIBE ground source heat pumps, the FLM module recycles old, stale

air from the house, extracts the energy from it and re-uses it to heat new, clean air from

outside. Air quality is improved while warmth is maintained – all at no extra cost.


NIBE VPB NIBE VPB is the new generation of accumulator tank with water heater. If your heat pump

does not have a built–in water heater, or if your household consumes extra large quantity of

hot water, a separate storage tank can be connected to the system (e.g. NIBE 7145 or solar

collector). It provides the hot water you need, or boosts the capacity of the expositing

system.


RADIATORS MADE OF PRESSURE CAST ALUMINUM FOR DOMESTIC USE

FFOGO, an exclusively designed radiator, distinguished by

its superior finish and extraordinary performance, is the

result of a combination of the most advanced technology

and the efforts of highly qualified personnel. FFOGO -

HEATING SENSATION.

ASMA YECT SL Pav. 3, St. 70

AERIS CA 550 RECUPERATOR

The newest generation heat recovery unit with counterblow exchanger, exchange capacity

over 95 % and minimum energy consumption.

REKUPERATORY Sp. z o.o. Pav. 15B, St. 25

THERMOBLOK

Thermoblok – insulation board - provides modern and

ecological solution in buildings insulation; made from

natural wood fibres, it is used for thermal insulation of

roofs, walls, and ceilings. Thermoblok protects against

heat in the summer and against cold in the winter.

Through the perfect acoustic insulation Thermoblok

ensures comfort of living and work.

UNICO sp z o.o.

Pav. 3, St. 90

CU-LT FIRE DAMPER

The newest product is tested in conformity with European

and Polish Standards. The CU-LT steel fire damper stands

out for its compact dimensions, which makes the damper

ideal for installations in locations where space is limited.

The damper distinguishes itself also by its extremely low

pressure drop (thanks to the ultrathin damper blade), very

low weight and air tightness. RF – TECHNOLOGIES SA Pav. 5b, St. 24

SENTINEL

Sentinel is a new range of ventilation systems for multi

occupancy and intermittently used rooms. Using efficient

ducted fans with intelligent sensing and control, the

system meets the ventilation requirements of both new

builds and refurbishment projects.

- Latest energy efficient EC/DC motors

- Airflow to 5300 m3/h, pressure up to 700 Pa

- Sentinel dedicated ventilation fan controller with

lockable isolator

- Acoustically treated ‘O’ class rated insulation

FLOP SYSTEM sp. z o.o. Pav. 5c, St. 80

PREFABRICATED PROFILE FOR CASTING FLOOR TIE BEAMS CORNERS

The presented prefabricated profile is an innovative technical solution, owing to which the

contractor can:

- reduce labour demand and cost of production of the tie beam corner thanks to eliminating

the need to cut profiles or boarding

- increase the strength of the boarding in the corner of the floor tie beam itself

- enhance safety during construction works

- improve aesthetic qualities and precision of the production of floor tie beams

KONBET Sp. z o.o. Sp. K. Pav. 3, St. 62

PRE-TENSIONED PRE-STRESSED CONCRETE FLOOR SLABS

45cm wide, 20cm high, span up to 12m

The most important properties are:

- unique modularity – the only 45cm wide slabs on the Polish market, enabling construction

of floors of different widths without cutting the slabs

- low weight – enabling easy and quick assembly using light hoisting equipment

- safe transport and storage thanks to the application of the so-called top pre-stressing

of concrete


TERIVA TWELVE-CHAMBER HOLLOW BRICKS

Unique geometrical shape (diversified shape of chambers) and top quality work make up

a product with the following excellent properties:

- high strength parameters

- increased thermal insulation

- improved acoustic properties

- low weight


CORIUM

Leather floors set a new landmark in room design with use of sustainable materials.

The surface is made of 100% recycled genuine leather and the use of cork - a renewable

resource - enhances the feeling of comfort, warmth and quietness.

EGEN S.A. Pav. 2, St. 23

CORK UNDERLAYMENT WITH MICROBAN PROTECTION Microban® technology is built-in to the products during manufacturing to provide continuous

antibacterial and antifungal protection. When microbes, such as bacteria, mould and mildew

come in contact with the product, Microban protection penetrates the products so that

the microbe cannot survive, grow or reproduce. EGEN S.A. Pav. 2, St. 23

LINE FOR FINISHING SURFACE TREATMENT – LUP TYPE

It is designed to spread oil, wax, stain, etc. on flat wooden and wood derivative material.

Its modular structure allows for the extension of the line by applying new methods of surface

treatment, for example to achieve artificial aging of floorboards. Thanks to applied tools and

adjustable working parameters, the treated surfaces are made with great repetition precision

and define a new quality of surface finishing.

FAMAD – FABRYKA MASZYN I URZĄDZEŃ PRZEMYSŁOWYCH S.A. Pav. 5, St. 106

SAIMA

Hardwood floors are radiant with Finland’s cultural heritage and the deepest moods

of the Finnish forest. Their beautiful appearance works in perfect harmony with excellent

usability, in both floor and wall use. Saima’s style and uncompromising quality open a full

range of new opportunities also for contemporary interior design.

EGEN S.A. Pav. 2, St. 23

SILVADEC

Composite planks of solid section made with the use of HDPE polymer (a polymer of new

generation of much higher strength).

PRZEDSIĘBIORSTWO BUDOWLANE „PODŁOGI-POSADZKI” Pav. 2, St. 13

ARTIFICIALLY AGED OAK WINDOWS

Artificially aged oak windows – every window is different

and unique DREWEXIM Sp. z o. o. Pav. 5d, St. 113

ENERGY EFFICIENT WINDOWS

Real energy efficient windows with UW value = 0.77

W/m2K (certified by IFT Rosenheim).

DREWEXIM Sp. z o.o. Pav. 5d, St. 113

COR-URBAN

Double leaf conceals 122 mm window system that

allows quadruple glazing for total acoustic

impermeability and ideal thermal insulation.

Possibility of incorporating manual or motorized

Venetian blind and storing it in the interior chamber

(50 mm). Access to this chamber for cleaning and

maintenance is provided.

It features a system of quadruple seals for

the improvement of thermal and acoustic insulation.

ALUMINIOS CORTIZO, S.A. Pav. 3, St. 70

PVC WINDOWS WITH SUPER SPACER® TECHNOLOGY

Thanks to this technology the UW heat penetration

coefficient is improved by 15%, noise is lower by 2 dB,

condensation of steam by 70%, life of a windowpane is

up to 20 years.

P.P.H.U. EUROCOLOR Sp. j. Pav. 5b, St. 51

VETREX ALPHALINE 90 PLUS

6-chamber system, 90 mm deep, U=0.7 W/m2K glazing,

Roto NT Designo hardware, thermal insulation: U=0.8

W/m2K with insulating wedge, 3 gasket levels with central

gasket, better acoustic insulation, tightness and warmth

permeability insulation.

VETREX Sp. z o.o. Pav. 5b, St. 32

ROOFS FOR CONSERVATORIES

Our roofs are suitable for all window profiles. The frame is made of aluminium designed to

accommodate PVC overlay. This system allows companies producing PVC windows to expand

their business by being able to offer complete conservatories to their customers.

MAGNO Pav. 5b, St. 42

PVC WINTER GARDEN

Structures built with PVC wall and roof. Coloured

woodgrain PVC-U.

OGRODY ZIMOWE ZAŁANOWSKI HENRYK Pav. 5b, St. 41

DRIVE SYSTEM FOR BLINDS WITH PLANETARY GEARS It improves the efficiency of controlling the blind. The brake

is used in the 25 x 25 horizontal blind system to stop the

lamella packet in any position and plays the role of an

operating mechanism, which makes it possible to move and

control the blinds – close / open and lift / lower the

lamellas.

ANWIS A.G. Wiśniewscy Sp. j. Pav. 5b, St. 53

ART NOUVEAU BY IOSA GHINI

The reference and its careful revisitation for Linea Art

Nouveau is characterized by a floral motif which

enriches spaces with its distinctive and light strokes.

The lines overlap, lightly carving the door just like

a work of art. Lively, playful and romantically

contemporary, Art Nouveau interprets the increasing

need to confer exclusivity on indoor spaces.

The white finish of the flat wing (Fiorella P) emphasizes

the bas-relief décor which gives depth and materiality

to the door panel. The glazed version (Fiorella V) is

a play of light and shadows which glide on the surface

of perfect petals, an ensemble of transparencies which

speaks of an eternal spring.

BARAUSSE POLSKA Sp. z o.o. Pav. 3A, St. 35

WORKING CENTER FOR DOOR FRAMES AND DOOR TRIMS, MOD. CLF (STEMAS) High output double sided CNC machine for cutting and

drilling at the angles of 45 deg. and 90 deg. and for

vertical and horizontal milling of holes for locks and

hinges. Additional drilling spindles allow to make joints

in the door trims. The machine is equipped with loading

and unloading system and can be operated by one

person. Use of the upper guide as a reference point

guarantees high quality and precision of working.

IMAC Sp. z o.o. Pav. 5d, St. 122

DOLCE VITA BY IOSA GHINI

Massimo Iosa Ghini interprets Tetrix® – the line of doors

with patented modular wings – in his own way, faces it

with leather and creates a furnishing element of unique

elegance and beauty.

No detail is overlooked. The leather panels are trimmed

with stitching in relief and the handle is housed in

a special block. Also masterful is the use of the

materials. The Collection is available in beige (PIA B) and

black (PIA N) tonalities.

BARAUSSE POLSKA Sp. z o. o. Pav. 3A, St. 35

THE GRP ( FIBERGLASS ) COMPOSITE DOORS

Semi finished doors, components, stained glass packages, complete technology.

Professional support during implementation of technological processes, painting

processes of doors with wooden, steel and PVC frames.

PW VIKKING KTS Pav. 3A, St. 53

INFINITY

Captivate, surprise, transgress… Infinity, a door

devised to leave no-one indifferent. The new line of

doors was created with innovative vocation.

Conceived for those who look for glamour,

elegance, sensuality, originality.

TOLEDOOR S.L. Pav. 3A, St. 66

MATERIA BY IOSA GHINI

Character and naturalness are elements which

make the first Graffiata door in the Materia line

a unique and refined furnishing element.

The warm nuances of natural oak are carved out

so as to create a suggestion of chiaroscuro which

confers depth on the wing. The wood's history is

engraved onto it: a living material which is

exposed to make its essence emerge. Imbued

with a powerful scenic presence, Graffiata has

the power to characterize environments by

exalting the atmospheres, whether they are

contemporary or classic.


THE ART OF MIMICRY

No longer with jambs, architraves and frames,

SECRET aligns and blends into the wall, skilfully

employing plays of mimicry to adapt to every

design need in terms of style and decoration.

Secret is available with a lacquered finish in all

the colour tonalities envisaged in the RAL

scale. On request, it is possible to deliver semi-

finished door so that it can then be finished on

site with the same finish as the wall (painted,

decorated, wallpaper, other facings).


INSULATED PANELS FOR SECTIONAL DOORS

The line of industrial and residential sectional door

panels.

Made from galvanized and prepainted guaranteed

quality steel, panels are also available with plastic

surface coatings for a wide range of architectural

finishes.

MARCEGAGLIA Pav. 9, St. 20

EASY GLASS SYSTEM EVO

An innovative aluminium system for all-glass balustrades. A set of plastic and rubber inlays

makes drilling in glass a thing of the past. Two possible ways of mounting; for glass

thicknesses of 12.76 – 21.52 mm.

Q-RAILING EUROPE HOLDING Sp. z o.o. Pav. 5c, St. 71

COROTOP® X-TREAM

Roof membrane consisting of three layers made

from polyester. The product of extreme

properties recommended on fully boarded heat-

insulated pitched roofs. Corotop X-tream with

high level of waterproofing, increased resistance

to high temperature (to 150 C) and resistance to

UV rays increased to 12 months is a guarantee

of durability and the highest quality.

CB S.A. Pav. 5e, St. 156

CORNICE SHAPED SEAMLESS METAL GUTTERS

These newly designed JS5 portable seamless gutter

machines are capable of producing 5", residential

grade, K-Style gutter from steel, aluminium and

copper. Changing from different materials is now

a breeze, with little to no adjustments.

ROYAL SEAMLESS Sp. z o.o. Paw. 4, St. 31

CARPENTERS’ ROOFING HAMMER

Hammer made of one steel part with leather grip

and magnetic nailholder. Plain or checked face. In

Picard’s offer you can find a wide range

of hammers.

DEKARZE.PL (ZI-CO Sp. z o.o.) Pav. 4, St. 39

WUKO SPRINTER LOCK SEAMER For single or double standing seams locking without

changing forming rollers. Forming rollers with

urethane coating are suitable for different working

materials (even stainless steel) without changing

forming rollers. The device does not damage

painted or coated materials. It is also used for

curved panels. Two working speeds help to work on

it more efficiently.


GEDA 200 Z MATERIAL HOIST

A new model from the GEDA Family – a small, light

and easy to carry material hoist GEDA 200 Z. It is

a perfect device for construction works on scaffolds

and walls. GEDA 200 Z can be easily mounted

directly to a scaffold or wall. The only space you

need to use it is 1.5 m x 1.5 m, which allows for

putting it nearby the wall. Thanks to rotating

platform mechanism it is easy to reload it on both

levels (upper and lower). ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,


GRIP-TONGS FOR STANDING SEAM

A perfect solution to set out and form the shape of standing seam front edge. The jaws are

curved on the one side and cut diagonally (45o) on the other. Thanks to the reliable ViseGrip

mechanism the tongs can be mounted very firmly on the edge and it is possible to form

the metal plate sheet directly on the jaws. The shape of the edge is very aesthetic and

repetitive.


UNIQUE ADJUSTABLE CARGO BARS

Cargo bar is used in transport to block freight or in

construction and roofing works. Easy in use. Tilting

non-slip rubber pads. Unique automatic security

brake.


JAWAR-I

The new JAWAR-I chimney system is certified for continuous operation at max. working

temperature of 600°C. It is resistant to soot fire and can be installed in the min. distance

50 mm from flammable materials. Innovative ceramic insulation ensures safe operation

of the chimney. The system has been tested for 60-minute-long fire resistance. JAWAR Sp. z o.o. Pav. 3, St. 76

EVOLUTIONCROSS-LASER 8P POWERBRIGHT RX

High-precision cross-line laser with 8 super-

bright laser lines, plumb laser and laser receiver.

The 4 horizontal laser diodes project

a homogeneous 360° laser line, the 4 vertical

laser lines are aligned at right angles to one

another.

GEOMATIX Sp. z o.o. Pav. 8A, St. 14

NOVACEL 4151 – 4152

A new solvent-free protection for prepainted

metals and rigid PVC

NOVACEL 4151 and NOVACEL 4152 protect

glossy or semi glossy prepainted metals and

provide high resistance to tearing during

sandwich panel process. Both these products can

also protect rigid PVC.

4151 / blue transparent film – 4152 / clear

transparent film

Water based acrylic adhesive

Outdoor resistance : 3 months

NOVACEL Pav. 9, St. 40

NOVACEL 4199

A new solvent-free film for PVC profiles

Clear transparent film, 45 μm

Water based adhesive

Outdoor resistance : 6 months


NOVACEL 9230

A new solvent-free protection for laminates

intended for postforming applications.

NOVACEL 9230 is designed for protection

of smooth and shiny laminates to resist high-

temperature postforming.

Clear transparent film, 25 μm



NOVACEL 9379

The new film for stainless deep drawing steel.

NOVACEL 9379 is an innovative film combining

improved good performance during multi-stage

deep drawing on automatic line with easy peel

characteristics.

Blue transparent film, 60 μm



KEBONY Kebony is a product of a Norwegian company

which patented an innovative method of wood

modification. At the beginning of the process the

liquid extract from biowaste is applied under

pressure, then wood is dried and cured. The

polymer is grafted to the cell structure in the

wood giving it unique properties. Kebony is

resistant to moisture and other weather

conditions. The process increases the destiny of

materials, makes them stiffer, harder, more

durable and aesthetic. Kebony requires no form

of maintenance beyond normal cleaning. Most

species currently used in kebonization are: pine,

southern yellow pine, beech and maple –

common and renewable wood.

SCANDINAVIUM Sp. z o.o. Pav. 2, St. 55

KNOCK WOOD

The lightness of construction in Knock Wood

staircase is achieved thanks to the use of classic

wooden materials. Its luxurious style is created

by steps made of beech mosaics and an

exquisite handrail designed by Giugiaro

Architettura. Steel balustrades as well as smooth

surfaces add a unique flavour. Steps are

enhanced due to the use of LED technology.

RINTAL POLSKA Sp. z o.o. Pav. 5a, St. 14

PRIMA Prima staircase is the result of a creative passion

of Rintal designers and Giugiaro Architettura,

a well renowned car designer. Its extravagance is

enhanced through price, a longer waiting period

and production made to individual preferences.

Prima’s elegance is created by unique, steel

banisters, elements an aluminium construction

and the use of LED technology.

RINTAL POLSKA Sp. z o.o. Pav. 5a, St. 14

STAIRSTEPS «AC» STANDARD OF SOLID GLUED OAK

Top side surface shows uniform colour with no

significant shades, some occasional knots of

5mm diameter but no sapwood. We offer

stairsteps of 30mm and 40mm thickness. An

individual lamella width is 40 to 50mm.

POL-KRES EDWOOD Pav. 2, St. 53

UNIHOUSE modular houses Modules – spatial elements of maximum sizes:

L14m x W4.2m x H3.7m, constructed with

the use of timber-frame technology, assembled

and turn-key finished in the factory.

Application: apartment buildings (up to 8

storeys) and single-family estates. High quality,

tremendous pace of the construction process.

UNIHOUSE Oddział UNIBEP S.A. Pav. 2, St. 47

DAMPMASTER PLUS

A professional test instrument for moisture in

wood, plaster and building materials. A clearly

organised, functional display and rubber guard

around the housing make this unit well-suited

for use in the rough professional environment.


RZEMYKOWA ŁUPANKA KAMIENNA -DECORATIVE SLATE

A decorative product of the highest quality,

ecological, made from natural stone according to

newest trends of design. Beautiful colouring,

interesting surface structure, the product

creates a unique climate of an interior as well as

offers the possibility of arranging the area

around the house, in the garden. For application

indoors and outdoors, simple installation.

GRANMAR Sp. z o. o. Pav. 12, St. 17

MICROSOFT DYNAMICS AX FOR BUILDING INDUSTRY

The newest ERP solution for the construction industry. The system supports all business areas

and addresses key industry problems: budgeting, project execution analysis, margin control,

cash flow, warranty deposit management, offer management, document management,

equipment and labour cost settlement, etc.

XPLUS S.A. Pav. 1, St. 27

R3D3 RAMA 3D 8.0; R2D2 RAMA 2D 8.0; EUROSTAL 1.0 COMPUTER PROGRAM

The static analysis of 3D rod systems of any

geometry, any load, and any bearing conditions.

The 2D version enables static calculations of flat

rod systems. EuroStal enables dimensioning steel

elements according to PN-EN 1993-1-1 Eurokod

3 June 2006.

ArCADiasoft / INTERsoft Sp. z o.o. Pav. 1, St. 40

ARCADIA-TERMO 2.0 COMPUTER PROGRAM

A new version of the program. On the Polish

market, ArCADia-TERMO is the most popular

program that enables to draw up energy

performance certificates which are a necessary

part of a construction project, as well as to draw

up energy/renovation audits, and also

indispensable when calculating the heating

demand that is needed to choose the heaters.

The previous version of the program was awarded

the Gold Medal at 2009 BUDMA International

Construction Fair, as well as many other awards.


ARCADIA-GRAF COMPUTER PROGRAM

A specialized tool for construction engineers.

It enables to create projections by means of 3D tools

such as walls, stairs, ceilings, as well as drawing tools.

The program is able to read and record DWG files

and it cooperates with all the programs that

constitute the ArCADia system.


ARCADIA ELECTRIC POWER SUPPLY SYSTEMS AND ELECTRICAL INSTALLATIONS 1.0 COMPUTER PROGRAM

A tool that adds new, extensive functions to

AutoCAD and ArCADia-IntelliCAD. It enables to draw

up construction projects of external cable power

lines and aerial low voltage lines, as well as internal

electrical and lighting installations, including the

necessary calculations and verifications.


ARCON 13 COMPUTER PROGRAM

The next version of a well-proven program for

architects. No other program on the Polish market

can compare to ArCon with respect to the speed and

simplicity of creating concepts, sections,

visualizations and interior designs. The body of the

building that has been designed using ArCon can be

exported to practically any other significant program

on our market.


DOMINTELL INTELLIGENT HOME CONTROL SYSTEM

DOMINTELL allows you to control all home functions,

for example: heating, air conditioning, ventilation,

lighting, shutters and blinds, garden watering, audio-

video equipment and many more by touch screens,

push buttons, remote controllers, mobile phones and

the Internet.

PRZEDSIĘBIORSTWO USŁUGOWO HANDLOWE POZELM Jacek Zart Pav. 1, St. 22

TENADO METALL 2010

Tenado METALL is a software solution tailored to the needs of locksmiths and metalworkers.

It offers a full range of industry-specific tools and functions that require no special

knowledge of CAD to use.

TECHNOBOX GMBH Pav. 5d, St. 121

ZWCAD

CAD Drawing & Drafting program, reliable CAD Software for 2D & 3D design. Unrivalled

DWG and DXF Compatibility, comprehensive and powerful functions are offered for the

entire graphical design process, friendly user interface and corresponding customization

files.

USŁUGI INFORMATYCZNE „SZANSA” Gabriela Ciszyńska-Matuszek Pav. 1, St. 37

COLLAPSIBLE TELESCOPIC LADDER Such ladders in the combined condition are very compact, have the size of 900 x 600 mm

and reach 3.80 meters in the moved apart position

UAB “BLLC” LTD Pav. 8A, St. 25

REVOLUTION 400 S

Robust, fully automatic rotary laser, precision

1 mm/10 m. Additional functions: AntiShake for rapid

set-up on vibrating surfaces and in windy conditions.

Single-slope function for manual tilt of an axis in

automatic operation, even if ADS tilt is active.


SELF LEVELING LASER GAT220HV

Self levelling laser GAT220HV, Horizontal self

levelling, Vertical semi automatic, adjustable rotation

speed, Removable metal head protection, H.I. Alert,

Match slope manually in both axes, Possible to

calibrate directly on the jobsite.

P.H.U. BIMEX B. BLOCH, J. MICKOWSKI sp.j. Pav. 8A, St. 38

SUPERROBUST R1000

Superrobust R1000, wherever highest accuracies are

required, measuring precision and speed, reflexion

free horizontal vial with magnifying effect, no more

double-bubble trouble, inverted measurement

possible, highest accuracy for life (0.3 mm/m in

normal position) due to ultrasonically welded vials,

4-chamber profile; extremely tough, extremely

torsion-resistant, 2 mm wall thickness, thick shock-

absorbing rubber end-caps.

P.H.U. BIMEX B. BLOCH, J. MICKOWSKI sp.j Pav. 8A, st. 38

4226REN – the new film for LASER cutting

4226REN cuts down on LASER-cutting time and

maintains surface integrity throughout the

mechanical transformation cycle.

White/white film, 100 μm

Solvent based rubber adhesive, adhesion strength:

140 cN/cm Outdoor resistance : 6 months


NANOCRIL

IBERSA has launched a nanotechnology based facade

acrylic paint with many advantages compared to the

ones conventionally produced:

- higher protection against humidity and better

permeability to water steam

- protection against UV radiation

INDUSTRIAS QUIMICAS GALLEGAS S.A Pav. 3, St. 70

UNI-FIX

UNI-FIX is a high quality, strong, one-component

adhesive/sealant based on MS polymer. The product is

odourless, neutral and free of isocyanides.

After application the UNI-FIX cures with atmospheric

moisture to form a durable rubber seal.

DEN BRAVEN EAST Sp. z o.o. Pav. 3A, St. 17

DIGILEVEL PRO 120

Digital electronic level with spot laser as an optical

extension for point-precise assessment of height and

angle. The flip-display feature changes the display

automatically when making overhead measurements.

Powerful adhesion magnets on the underside.


FLOOR CARDBOARD

Floor Cardboard (painting cardboard) containing

textile fibres offers perfect protection during any

kind of building works. It is an ecological and

successful alternative for all polyethylene film.

Resistance, safety and comfort of work guarantee

stable growth of floor cardboard popularity.

FABRYKA PAPIERU I TEKTURY „BESKIDY” S. A. Pav. 3A, St. 72a

SOLAR POWERED STREET LAMPS

Eye-catching, self-sufficient solar light for

professional exterior lighting systems, equipped with

LED-technology. Not only highly efficient in lighting,

but also a decorative element for streets, squares,

parks, modern residences or companies. Economical

– aesthetic – innovative – reliable in operation.

ACTION ENERGY Sp. z o.o. Pav. 9, St. 14b

FIESTA Fiesta is a collection of furniture for small bathrooms.

The body is always wenge, while the fronts are

available in four versions: fancy circles, a blurred

mixture of stripes and more classic: wenge and

white. The cabinets are provided with a „push-to-

open” system. The washbasin cabinets without

handles are equipped with a towel rail.

ANTADO sp. z o.o. Pav. 3A , St. 3

MADERA Madera is a practical collection of wheeled furniture

enabling to give your bathroom an individual shape.

Additional details like a drawer organizer or

a supplementary basket are a good help to use the

space effectively. A lamp in the side cabinet and

a soft closing system raise the standard of the

collection.

ANTADO sp. z o.o. Pav. 3A, St. 3

CASSO SERIES

Casso is a unique collection of two-coloured furniture

units. The design accent is placed on asymmetry and

underlined with a modern, chrome-covered handle.

A geometric washbasin is well-adjusted to

the minimalistic cabinets. Washbasin cabinets in

three available dimensions make it easier to manage

bathroom space effectively.

ANTADO sp. z o.o. Pav. 3A, St. 3

Documents

COMMODITY GROUPS - BUDMA · COMMODITY GROUPS: - Binding materials - Concrete - Walls ... work in conjunction with NIBE ground source heat pumps, the FLM module recycles old, stale