Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Commercial spray is the spray-on application of�ber with adhesive to a properly prepared surface that remains exposed. The application must be impacted in a smooth,uniform mannerwith adequate supply of adhesive, to assure a visually attractive, long lasting application.
[hoses not included]
*tips sold separately
GLUE/WATER BARREL
PUMP/MOTOR ASSEMBLY
COMMERCIAL NOZZLE
(230volt/50hz available for export)
The heavy duty plastic barrel with lid has a 48 gallon (181 liter) capacity. The lid, whichprotects the glue/water from �ber contamination, is �tted with a PVC stand pipe,an externally replaceable screen to �lter the glue/water, and a quick disconnect �tting.
The MP-20 pump is a high quality, double belt-driven, self-priming, twin diaphragm pump with 1hp. TEFC 120/240volt 60hz. motor (14amp), o�ers easy, reliableoperation, making this pump ideal for theprofessional contractor.
The commercial nozzle has a narrow, �at ori�ce to increase the dispersing, velocity and impact of �ber. This will maintain a �at, smooth �owing spray pattern which will fullyencapsulate the �bers.
CommercialSpray-On Systems
60 Years of American Ingenuity
ANY JOB.ANY SIZE.ANY PLACE.The Innovator in Insulation Equipment
TM
KRENDL MACHINE COMPANY • 1201 SPENCERVILLE RD • DELPHOS, OHIO 45833 • 800.459.2069 • F 419.695.9301
krendlmachine.com
60 Years
1958-2018
© January 2018
EQUIPMENT REQUIREMENT
Blowing Machine: An all-�ber airlock machine providing a precise metered �ow of �ber and generating su�cient velocity from the blowers to impact material in vertical and overhead applications
Pump System: Capable of pumping adhesive with the required pressure (p.s.i.), capacity (g.p.m.) and smoothness of spray pattern.
Glue/Water Barrel: Container holding su�cient quantity of adhesive or water, covered with lid, protects glue/water from �ber contamination. The barrel has an externally accessible �lter system to prevent clogging of spray nozzle tips and appropriate size, suction, bypass and pressure hoses.
Spray Nozzle: A narrow, �at ori�ce increases the velocity and dispersal of �ber while maintaining a smooth �owing, multiple jet spray pattern which will fully encapsulate the �bers.
Includes: control bypass assembly with pressure gauge and shut-o� ball valve, �ttings for input, discharge and bypass recirculation hoses. The TEFC overload protected electric motor operates on 120/240volt 60hzand supplies adequate power for standard spray-on applications. Larger motors providing higher pressure and capacity are available upon request on the MP-20 pump and M-03.
Features: • all-aluminum spray head • 2,4,6, or 8 jet • 2" (5.1cm.) or 2 1/2" (6.4cm.) diameter connection for insulation supply hose • 3/8" (9.5 mm.) hose connection with shut-o� ball valve for liquid adhesive supply hose • Spray tips available upon request
Weight: • 2" (5.1cm.) nozzle: 1.4 lbs. (.6 kg.) 2 1/2" (6.4cm.) nozzle: 1.6 lbs. (.7 kg.)
COMMERCIAL SPRAY-ON SYSTEMS
Spray-On Systems
The Innovator in Insulation EquipmentTM
Scan to learn more about Krendl Machine