Upload
gea1616
View
223
Download
0
Embed Size (px)
Citation preview
8/8/2019 Commercial Printing Methods
1/16
Modern Printing Methods explained.
GCSE Graphic Products
What do we need to know for our exam????
The AQA (our examining board) specifies the following:
Quality checks such as colour registration marks, position marks.
Commercial printing methods- letterpress, lithography, flexography, gravure and
screen printing.
Varnishing (oil, spirit, UV and water).
Laminating, embossing and foil application.Multiple surface developments (nets) produced by die cutters and creasing bars.
8/8/2019 Commercial Printing Methods
2/16
Modern Printing Methods explained.
GCSE Graphic Products
The five main types of printing are:
Relief- Letterpress, Block printing, Flexography (foil blocking)
Planographic (flat plate printing)- Lithography & offset lithography
Intaglio (etching) Gravure, Screen Printing
Xenography (dry printing)- Photocopying, Laser printing, commercial digital printing
Please note that while it is good to know what these are, not all are required for
the AQA syllabus.
8/8/2019 Commercial Printing Methods
3/16
Modern Printing Methods explained.
GCSE Graphic Products
FlexographyFlexography is a form ofrelief(a raised profile) printing.
The image is slightly raised, inked and the printed straight onto the substrate
(technical term for paper, card or whatever is being printed on).
The plate is usually made from soft rubber or plastic and uses a quick drying ink.
This high speed process is well suited to a number of materials such as acetate
film, polyethylene (eg supermarket bags), brown paper and newsprint.
For more information visit:
http://graphics.tech.uh.edu/MatProcesses/Flexography.html
a rubber flexograph plate
Flexograph machine
8/8/2019 Commercial Printing Methods
4/16
Modern Printing Methods explained.
GCSE Graphic Products
Offset LithographyOffset Lithography is by far the most common form of commercial printing. It accounts for
over 70 % of commercial printing.
Offset lithography works on a very simple principle: oil and water dont mix. Images (wordsand art) are put on plates which are damped first by water the by oil-based ink. The ink
sticks to the image area , the water to the non-image area which absorb moisture and
repel ink. Then the image is transferred to a rubber roller and then to the substrate. This
happens at an extremely fast speed as the plates are wrapped around a roller. The paper
is web fed (a continuous roll).
8/8/2019 Commercial Printing Methods
5/16
Modern Printing Methods explained.
GCSE Graphic Products
What happens inside
An offset lithography machine has four of these presses, printing thecyan, magenta, yellow and black (CYMK) components of a print.
8/8/2019 Commercial Printing Methods
6/16
Modern Printing Methods explained.
GCSE Graphic Products
Advantages of offset lithography:
Prints 4 colours onto flat materials
It is a high quality process
Very economical on medium to large production runs 500 - 500,000
It is a fast process speeds of up to 50,000 presses per hour can be acheived on
a web fed press!
Disadvantages of offset lithography
Less economic than rotogravure and flexography on high volume printing
1,000,000+
Less economic than digital printing on small to medium runs 50 -100,000(although
quality is slightly higher)
Limited to the type of materials it can print onto the surface must be flat. Litho
would not be accurate enough for newspaper print.
8/8/2019 Commercial Printing Methods
7/16
Modern Printing Methods explained.
GCSE Graphic Products
Gravure
Gravure is a printing process that uses intaglio or engraved metal plates or cylinders.
The image to be printed is photo-etched onto the plate as microscopic dots.Rotogravure is a printing technique characterised by high print quality and large
numbers of copies hundreds of thousands or even many millions. Tiny ink volumes
are transferred from the gravure printing cylinder to printing dots on the paper. Millions
of printing dots show up to the human eye as letters/text or images
The "doctor blade" isangled against the cylinder
to wipe away the excess
ink, leaving ink only in the
cell wells
8/8/2019 Commercial Printing Methods
8/16
Modern Printing Methods explained.
GCSE Graphic Products
The main application of gravure covers a wide range of commercial products.
Gravure is especially suited to work in the four colour process on relativelycheap papers in quantities over 250,000. The reason being the expense of the
original printing plates which can each run into thousands of pounds.
Example applications include
magazines
mail-order
catalogues
Board packaging products such as folding box cartons for food and cigarette
industries, also printed video cases.
Flexible packaging such as printed cellophane and polythene used in food
wrapping, display and production.
8/8/2019 Commercial Printing Methods
9/16
Modern Printing Methods explained.
GCSE Graphic Products
Advantages of Gravure:
It can be used for the highest quality reproductions
It uses lower grade, lighter paper than lithography
High speed usually 6000-10,000 prints per hour
Automatic registration.
Disadvantages of gravure
Initial cost of rotogravure plates extremely high therefore it is only economic forvery high print runs
Colour correction is difficult
8/8/2019 Commercial Printing Methods
10/16
Modern Printing Methods explained.
GCSE Graphic Products
Silk Screen Printing
Screen Printing is unlike any other process as it uses a stencil through which ink is
pushed. The process involves forcing ink through a fine mesh (screen) which helps to
spread the ink evenly.
Its easy to use, versatile and requires low
capital investment.
Relatively cheap on short and medium print
runs automated presses which can print,varnish or gum up to 6000 per hour.
Most importantly it can print onto curvrd and
uneven surfaces
8/8/2019 Commercial Printing Methods
11/16
Modern Printing Methods explained.
GCSE Graphic Products
The main stages of modern print production
Prepress
origination
compostion
Colour separation
Plate production
sheet or web fed
4 colour printing
Quality control
Finishing
Stiching binding stapling
Embossing, blocking
Varnish and laquer
Die cutting and
creasing
8/8/2019 Commercial Printing Methods
12/16
Modern Printing Methods explained.
GCSE Graphic Products
The main stages of modern print production
The basic stages of modern print production are:
1. Original artwork photographs, illustrations and text are scanned and enteredinto a computer
2. These elements are combined into a document using page makeup or desktoppublishing software
3. Full size films are output using a high-resolution imagesetter. These could beeither positives or negatives.
4. Printing plates are made from films using a photochemical process
5. The flexible plates are attached to the plate cylinders of a litho press and the job is
printed.
8/8/2019 Commercial Printing Methods
13/16
Modern Printing Methods explained.
GCSE Graphic Products
Full Colour PrintingFor printing, and image is separated into its
colours Cyan, Magenta, Yellow and Black
(CMYK).Each colour is printed over the other as the
paper (or substrate) moves through the
presses. Each colour has its own press.
For the original go to
micro.magnet.fsu.edu/.../primarycolors/
colorseparation/
Cyan magenta yellow black
8/8/2019 Commercial Printing Methods
14/16
Modern Printing Methods explained.
GCSE Graphic Products
Quality ControlThe two main quality checks are:
Registration
Colour Density
Registration can be checked by either eye or
automatically and are used to check that the 4
processes are aligned properly on the substrate.
Images out of alignment can appear blurred.
Colour density is checked using a Densitometer,
which is a hand held device that measures the
density of colour.
The densitometer is held over the colour bar (one
colour for each of the process colours and
greyscale.
Registration marks at about 10X magnification
A colour density bar
8/8/2019 Commercial Printing Methods
15/16
Modern Printing Methods explained.
GCSE Graphic Products
BindingOnce printed the next stage is the binding of the product. The bindery is where the
printed product is completed. The huge rolls of now-printed paper are cut and put
together so that pages fall in the correct order. Pages are also bound together by,staples or glue, in this step of the process.
A machine called a stitcher takes the folded printed paper (called press signatures)
and collates them together.
The final components in the stitcher machine are the knives which trim the paper to its final delivered size.
A sticher machine Paper being cropped manually
8/8/2019 Commercial Printing Methods
16/16
Modern Printing Methods explained.
GCSE Graphic Products
Cutting and Folding (creasing)
Most cartons (packages, boxes) require cut outs and creases in order for them to be
assembled. The machine tool used on modern presses is the die cutter.