Commercial List Pricing List Pricing Issue: Vol. 2, 2013. ... is a national network of laboratories located in key cities and regions ... • Method required calibration

800.220.3675

L A B O R AT O RY S E R V I C E S P R I C I N G G U I D E

Commercial List Pricing

Issue: Vol. 2, 2013

Arizona – Phoenix (1,2) Asbestos, Food Micro and Mold Testing3356 West Catalina Dr., Phoenix, AZ 85017Tel: 602-276-4344

California – Garden Grove (1,2,3,4) LA TESTING Asbestos, Lead, Mold, Bacteria, TO-15 and Industrial Hygiene Testing11652 Knott Ave, Unit F5, Garden Grove, CA 92841Tel: 800-755-1794

California – South Pasadena (1,2,3,4)LA TESTING Asbestos, Lead, Mold, Bacteria, Food Micro and Materials Testing520 Mission Street, South Pasadena, CA 91030 Tel: 800-303-0047

California – San Diego (1,6) Asbestos and Mold Testing7916 Convoy Court, San Diego, CA 92111 Tel: 858-499-1303

California – San Leandro (1,2,6) Asbestos, Food Micro, Lead and Mold Testing2235 Polvorosa Ave., Ste 230, San Leandro, CA 94577Tel: 888-455-3675

Colorado – Denver (1,2) Asbestos and Mold Testing1010 Yuma Street, Denver, CO 80204Tel: 303-740-5700

Connecticut – Wallingford (1,2) Asbestos, Food Micro, Mold and Bacteria Testing29 North Plains Hwy, Unit 4, Wallingford, CT 06492Tel: 203-284-5948

Florida – Miami (1,2,5) Asbestos and Mold TestingSkylake Executive Industrial Park19501 N.E. 10th Ave., Bay AN. Miami Beach, FL 33179Tel: 305-650-0577

Florida – Orlando (1,2,4,5) Asbestos, Food Micro, Lead, Mold and BacteriaTesting5125 Adanson St., Ste 900, Orlando, FL 32804Tel: 407-599-5887

Florida – Pensacola Service Center216 S. Tarragona St., Ste A, Pensacola, FL 32502Tel: 877-476-5866

Florida – Fort Lauderdale (1,2) Asbestos and Mold Testing2700 West Cypress Creek Rd., Bldg. B, Suite 111Fort Lauderdale, FL 33309Tel: 954-786-9331

Florida – North Port Service Center2500 Bobcat Village Center Road, Unit FNorth Port, FL 34288Tel: 941-423-4597

Georgia – Atlanta (1,2) Asbestos, Mold, Food Micro and Bacteria Testing2205 Corp. Plaza Pkwy. SE, Ste 200, Smyrna, GA 30080Tel: 770-956-9150

Illinois – Chicago (1,2,4) Asbestos, Lead, Mold and Food Micro Testing2225 West Hubbard St.., Chicago, IL 60612Tel: 773-313-0099

Indiana – Indianapolis (1,2,3,4,6) Asbestos, Lead, Mold, Bacteria, EnvironmentalChemistry, Food Micro & Industrial Hygiene Testing2001 East 52nd St., Indianapolis, IN 46205Tel: 866-736-4824

Louisiana – Baton Rouge (1,5,6) Asbestos, Lead and Mold Testing11931 Industriplex Blvd., Ste. 100Baton Rouge, LA 70809Tel: 225-755-1920

Maine – South Portland 161 John Roberts Rd., South Portland, ME 04106Tel: 971-717-3895

Maryland – Beltsville (1,2,3,6) Asbestos, Lead, Mold, Food Micro and BacteriaTesting10768 Baltimore Avenue, Beltsville, MD 20705Tel: 301-937-5700

Massachusetts – Boston (1,2,3) Asbestos and Mold Testing7 Constitution Way, Ste. 107, Woburn, MA 01801Tel: 781-933-8411

Michigan – Ann Arbor (1) Asbestos and Mold Testing212 S. Wagner Rd., Ann Arbor, MI 48103Tel: 734-668-6810

Minnesota – Minneapolis (1,2,4,5) Asbestos, Lead and Mold Testing14375 23rd Ave. North, Minneapolis, MN 55447Tel: 763-449-4922

Missouri – St. Louis (1,2,3,4,6) Asbestos, Lead, Mold, Bacteria, and Food MicroTesting3029 S. Jefferson Street, St Louis, MO 63118Tel: 314-577-0150

Montana – Libby (1) Asbestos Testing107 West 4th St., Libby, MT 59923Tel: 406-293-9066

New Jersey – Piscataway (1,5) Asbestos and Mold Testing1056 Stelton Rd., Piscataway, NJ 08854Tel: 732-981-0550

New Jersey – Cinnaminson (1,2,3,4,5,6) Corporate HeadquartersAsbestos, Lead, Mold, Bacteria, EnvironmentalChemistry, Industrial Hygiene, TO-15,Radiochemistry, PCR, Food Micro, Food Chemistry,Materials Science and Pharmaceutical Testing200 Route 130 North, Cinnaminson, NJ 08077 Tel: 800-220-3675

New York – Buffalo (1,5) Asbestos and Mold Testing490 Rowley Rd., Depew, NY 14043Tel: 888-260-5887

New York – Carle Place (1,3,4,5) Asbestos, Lead and Mold Testing528 Mineola Ave., Carle Place, NY 11514Tel: 516-997-7251

New York – New York City (1,2,3,4,5) Asbestos, Food Micro, Lead, Mold and BacteriaTesting307 West 38th St., New York, NY 10018Tel: 866-448-3675

North Carolina – Charlotte (1,2) Asbestos and Mold Testing376 Crompton St., Unit 71, Charlotte, NC 28273Tel: 704-525-2205

North Carolina – Kernersville (1,4) Asbestos, Lead and Mold Testing706 Gralin St., Kernersville, NC 27284Tel: 336-992-1025

North Carolina – Raleigh (1,2,6) Asbestos, Food Micro and Mold Testing2500 Gateway Centre Blvd., Ste. 600Morrisville, NC 27560Tel: 919-465-3900

Ohio - Cincinnati (1,2,3) Asbestos and Mold Testing4623 Wesley Ave., Ste F, Cincinnati, OH 45212Tel: 513-208-2226

Pennsylvania – Plymouth Meeting (1,6) Asbestos and Mold Testing521 Plymouth Rd., Ste 107Plymouth Meeting, PA 19462Tel: 610-828-3102

South Carolina – CharlestonService Center975 Morrison Dr., Bldg. C, Ste. ACharleston, SC 29403Tel: 888-958-8170

Texas – Houston (1,2,5,6) Asbestos, Food Micro, Mold and Bacteria Testing8700 Jameel Road, Ste 190Houston, TX 77040Tel: 713-686-3635

EMSL CANADA, Inc. - Ontario (1,6)Asbestos, Radon, Lead and Mould Testing10 Falconer Drive, Unit 3Mississauga, Ontario, L5N 3L8Tel: 289-997-4602

1 NVLAP Accredited*2 AIHA EMLAP Accredited* 3 AIHA IHLAP Accredited* 4 AIHA ELLAP Accredited* 5 NELAC Accredited*6 A2LA Accredited*

*Certifications/Accreditations may be for specific Field of Testingand/or Lab Division; verify specific accreditation parameters and up-to-date status with your account representative.

E M S L L A B O R A T O R Y L O C A T I O N S

2

The EMSL Diamond Standard ........................................................................................................4

Standard of Care and Commitment to Quality..............................................................................5

Qualified and Properly Trained Staff .............................................................................................6

Standard Operating Procedures.................................................................................................7-9

Quality Controls ......................................................................................................................10-11

Asbestos Laboratory Services ...............................................................................................12-15

Lead (Pb) Laboratory Services...............................................................................................16-17

Environmental Microbiology Laboratory Services ................................................................18-21

Microbiology Special Projects................................................................................................22-23

PCR and DNA Laboratory Services ........................................................................................24-26

Industrial Hygiene Laboratory Services ................................................................................27-33

IAQ Laboratory Services.........................................................................................................34-37

Materials Science/Forensics Laboratory Services................................................................38-41

Environmental Chemistry/Consumer Products Laboratory Services ...................................42-45

Radiochemistry Laboratory Services ..........................................................................................46

Terms and Conditions ..................................................................................................................47

Table of Contents

T H E E M S L D I A M O N D S T A N D A R D

EMSL Analytical, Inc., (EMSL) is a national network of laboratories located in key cities and regions nationwideand Canada. Established in 1981, the company has expanded its analytical services and capabilities and now

operates more than thirty-one locations all striving for excellence in providing quality laboratory services in a timely and cost competitive manner.

Our diverse staff of over 500 employees includes a wide range of expertise, educational background and capabilities. These dedicated and capable employees follow the lead

and standard of care demonstrated by the owner and founder of the company, Dr. Peter Frasca, who, as a hands on owner maintains daily involvement in

our laboratory operations, and dictates that our work is consistent with his EMSL Diamond Standard. This “Diamond Standard” includes the following:

◆ Quality Data - Strict Adherence to our Quality programs and regulatory requirements which comply with the ISO 17025 guidelines

so that our data is tracked, managed, reported, and verified to be accurate and reliable.

◆ Customer Dedication - We strive to create lasting, mutuallybeneficial relationships with all clients. We solicit feedback from ourclients and we are committed to responding quickly to any questions orconcerns that may arise before, during, or after an assignment.

◆ Analytical Expertise - We employ highly qualified and experiencedchemists, geologists, physicists, mycologists, microbiologists, biologists,materials scientists and industrial hygienists to enhance our analytical abilities and expertise.

◆ Integrity and Ethics - We insist that our employees uphold the highest ethics and standards. We maintain a “no-compromise” policy

as it pertains to any ethical issue.

◆ Responsiveness - We recognize that the timeliness of a report is as important as the quality of the data. We will not however, allow deadlines

or the rush needs of a project to adversely impact our quality objectives.

◆ Technology - We recognize the importance of new technology to better enableus to provide improved service. Extranet access to your data, customized reports,

Laboratory Information Management Systems, and analytical instrumentation are continuously upgraded to enable continuous improvement of our service and capabilities.

◆ Value – We believe that a business relationship with EMSL provides you with an excellent value. We provide you with a complete value package that includes all the components of the EMSL

Diamond Standard.

Headquarters

EMSL Analytical Locations

L O C A L L Y F O C U S E D , N A T I O N A L L Y R E C O G N I Z E D

EMSL Analytical Inc. has been fortunate to beable to maintain a solid history of stable growthand viability for the past thirty years with a current network consisting of thirty-one (31) laboratories and three (3) service centers.

See inside front cover for each location.

UNMATCHED CAPACITY FROM OUR COLLECTIVE STRENGTH OF NATIONWIDE LOCATIONS

4

5

EMSL Analytical, Inc.’s laboratory services are governed by our Quality AssuranceProgram (QAP) of Policies and Procedures which is described in our QualityAssurance Manual. This program follows the quality guidelines as documentedin ISO/IEC 17025:2005 as well as program requirements of the A2LA,American Industrial Hygiene Association (AIHA), the National VoluntaryLaboratory Approval Program (NVLAP), The NELAC Institute (TNI),and other applicable state and federal regulatory requirements associatedwith laboratory accreditations/certifications.

Our QAP has been designed to ensure that quality professional servicesand technical excellence is provided to our customers. It is a real andliving program in that the QAP Policies and Procedures are integratedinto our daily work and are continually reviewed and updated byManagement. It is formally reviewed at least annually by the CorporateQA Manager as well as formal reviews performed any time a problemarises that indicates a possible program flaw. In such instances, theCorporate QA Manager involves the Corporate Officers as well asNational Directors, Regional Managers, Laboratory Directors, and QualityControl Department Personnel and Senior Analysts/Chemists to ensure thatall necessary feedback is solicited from all staff levels of the operation.

E M S L ’ s S T A N D A R D O F C A R E A N D C O M M I T M E N T T O Q U A L I T Y

Organizational Responsibility and Commitment

The corporate headquarters of EMSL Analytical, Inc.operates out of the Cinnaminson, New Jersey labora-tory location. The corporate headquarters overseesthe laboratory operation at the corporate lab locationas well as all of the network laboratories nationwideand in Canada. The Corporate Management teamrecognizes the importance of our Quality AssuranceProgram and understands that company successcomes from its performance and commitment toQuality. Management’s policy for the laboratory is toperform all work in a responsive and efficient mannerwithout compromising Quality. To accomplish this,the Corporate Management team makes the necessaryfinancial resources for the equipment and staffingneeded to ensure the following Quality AssuranceProgram goals are achieved:

• Delivery of the highest quality of professional services and technical excellence to our customers.

• Provide quality, accuracy and integrity of analytical results in a responsive manner.

• Conformance with all approved analytical methodologies and SOP’s.

• Fulfillment of the requirements of the American Industrial Hygiene Association (AIHA), the National Voluntary Laboratory Approval Program (NVLAP), and/or The NELAC Institute (TNI).

• Conformance with corporate mandated Quality Assurances and Quality Control (QA/QC )requirements.

• Ensuring the standards documented in ISO 17025:2005 are upheld in all company business activities.

Key Components of EMSL’sQuality Assurance Program (QAP)1. Use of Qualified and Properly

Trained Staff• Establishment of minimum qualifications for

education and experience• Job descriptions of each position clearly

delineating responsibilities• Establishment of formal training requirements• Ethics and integrity awareness training and

requirements2. Adherence to Standard Operating Procedures (SOP’s)

• Good laboratory technique that ensures a contamination free environment

• Assurance that national coherency is maintained • Proper documentation, document control, and

record retention• Conformance with all approved analytical

methodologies• Use of appropriate analytical technology including

review of current literature to capture recent applicable developments

• Respect for customer confidentiality• A work atmosphere away from unreasonable productivity

pressures 3. Extensive Quality Controls

• Constant oversight of laboratory quality performance• Internal and external quality audit programs• Proper documentation and quality review of

analytical data• Participation in round robin and/or proficiency

testing programs• Method required calibration checks, use of reference

standards, control blanks, replicate/duplicate sample analyses, etc.

• Control of records and documents• Maintenance of accreditation and certification programs

6

Education and ExperienceMinimum education and experience requirementsare listed for each position within the company.Additionally, all technical staff (analysts, chemists,technicians, etc.) must successfully complete anEMSL training program prior to performing analysis independently.

Training ProgramsLaboratory Managers are responsible for ensuringthat appropriate training is provided to the technicalstaff and that they are qualified to perform the testmethod. At a minimum, training consists of formalinstruction and hands on training with the instru-ments and systems related to the analytical processand methods. Additionally the training includes formal tracking and documentation of a person’s“Demonstration of Capability” (DOC) which isrequired before they can independently process samples. Annually, ongoing training and review ofongoing demonstration of capability is performed. Ongoing training is provided to all employees on a consistent basis which may include but not be limited to the following:• Laboratory Staff Meetings – Typically include

a variety of topics but often address technical updates on analytical methods, customer service training issues, health & safety incidents and training, etc.

• Laboratory Audit Review – Staff are encouraged to consult with internal and external auditors for advice on various topics related to the audit findings and recommendations and/or deficiencies.

• Workshops provided by professional organizations, agencies and/or by instrument/equipment vendors.

Health and Safety TrainingHealth & Safety training is provided to all EMSLemployees as described in our written ChemicalHygiene Plan. The Chemical Hygiene Plandefines work practices and procedures that ensurethe employees of EMSL Analytical, Incorporatedare protected from health risks associated with the potential exposure to hazardous chemicals and iscompliant with the standard promulgated by OSHA entitled “Hazardous Work in Laboratories”,29CFR 1910.1450.

Code of Ethics TrainingOne of the objectives of the QAP is to ensure that staff of EMSL are provided information withregard to ethics as they pertain to laboratory operations. The goal of the EMSL ethics trainingand policy is for each staff member to understandtheir responsibility to provide true and accurateinformation and the consequences of unethicalconduct. The QAP addresses the Code of Ethicsby including the following:

• Specific guidelines and interpretations which define “Right and Wrong” as it relates to job related situations.

• Reinforcement of the consequences of unethical decisions and the understanding of the impact of our actions.

• Direction to employees to report or inquire about situations that may be ethically questionable.

• Procedures which ensure that all employees are free of unreasonable pressure and stress.

Q U A L I F I E D A N D P R O P E R L Y T R A I N E D S T A F F

Analysis of Environmental Samples requires special skills that come from a combination of industry experi-ence and academic credentials, coupled with formal training. The individual training requirements for eachperson is based on the complexity of the test(s) that will be performed by the individual. EMSL will only allowa scientist to independently express results after they have met the requirements of the training program. Ourprograms address both the technical scientific aspects of the analytical process as well Ethics and IntegrityTraining as it pertains to the process of providing data and results to our customers.

S T A N D A R D O P E R A T I N G P R O C E D U R E S

Acceptance of WorkOur services are generally offered as unit cost tests which reference documented methodologies.Laboratory services are typically requested by thecustomer as “open order” requests meaning that samples may be delivered to the laboratory at anygiven time, without a firm documented arrangement(contract). EMSL accepts the customer Chain-of-Custody (COC) as the open-order authorizationwhich specifies the analytical test, turn-around-time(TAT), and quantity of tests to be completed. In theabsence of a formal contract agreement, work-order,and/or purchase order, EMSL’s Terms andConditions will apply. Modifications to the standardTerms and Conditions must be documented andagreed upon by both EMSL and the customer.Sample Acceptance CriteriaThe acceptance of custody of the samples at time ofdelivery does not imply that samples are acceptablefor analysis. Since often the condition of samplescannot be determined prior to preparation, final sample acceptance does not occur until samples areprepped or analyzed. At that time, samples areinspected and evaluated to determine if they conformto laboratory acceptance criteria. If they do not, or if the Lab has any questions as to the validity of thesample, then the sample is further scrutinized by the lab manager or designated person who will thendetermine whether the questionable condition is suf-ficient to require rejection of the samples. Samplesmay also be rejected if its condition or contents attime of delivery is unsuitable (e.g., improperly pack-aged) or may pose a risk in handling or processing.Rejections of samples will be followed up by immedi-ate notification to the customer for further direction.Sample Tracking and ControlChain-of-CustodyIn order to ensure the integrity of any sample,records of its custody must be maintained from sam-ple collection in the field until relinquishment of thesamples and acceptance by the laboratory. Since the

customer collects the sample, EMSL does not acceptresponsibility for the validity of the sample collectionand delivery protocols, nor the sample informationreported by the customer. As needed and/or requested, we can recommend sampling media, volumes, sample size, and other items which we havefound to have an effect on the quality of the analysisdue to the sample condition. Once the sample is accepted for analysis by the laboratory, the EMSL “Internal Chain of Custody”is used to document the handling of the samplesthroughout the analytical process. In instances when samples are internally transferred to a different EMSL lab in the network, the samples areaccompanied with a completed “Sample RelinquishForm” which includes internal custody transfer sign-off and customer/project information for tracking purposes. A copy of the completed form isalso maintained in a tracking manual at the initial lab that received the samples. Whenever samples are transferred to another lab, EMSL will requestcustomer approval for the transfer unless a standingagreement is in place. Sample Log-InEMSL’s sample tracking and control starts from thetime the samples arrive at the laboratory at “samplereceiving/log-in”. Log-in of samples is normallydone by the log-in department and/or the adminis-trative coordinator but may also be done by otheremployees trained and familiar with the process.Information is entered for the samples received bythe laboratory into the Laboratory InformationManagement System (LIMS). LIMS is a computerbased management system which serves to track allsamples from receipt through prep, analysis, report-ing, and billing processes. If requested, the LIMSsystem will send an email notification automaticallyto the customer when the samples are received byEMSL. The email notification includes when thesamples were received, sample log-in information(tests, sample numbers, etc) and the scheduled duedate for results.

Instructions and procedures for the activities related to the analytical process are developed by managementand are clearly defined and documented in our Standard Operating Procedure (SOP) Manuals. These techni-cally specific SOP’s are located at each laboratory facility and include the step-by-step procedures for each analytical test method performed inclusive of the initial acceptance and handling of samples, sample controlthroughout the process, sample preparation, analysis, and reporting of the data. EMSL utilizes company widestandard procedures incorporated in each specific SOP which comply with our QAP and adhere to the follow-ing protocols:

7

8

Archival and Disposal of Samples

Samples which are not completely consumed inanalysis are retained as detailed in the area-specificquality assurance modules which specify sampleretention schedules. In accordance with this sched-ule, samples are then disposed of by a licensed con-tractor, where required, and a copy of the wastemanifest is obtained and kept on file.

If requested, samples will be returned to the cus-tomer. If a customer has specific requirements forsample storage or retention times beyond standardEMSL policy, this should be discussed at the time of sample delivery, documented and approved byEMSL and the customer.

Subcontracting

Other than utilizing our internal network of labs,EMSL generally does not subcontract much analyti-cal work to outside laboratories. However, in theevent such services are required, the laboratory man-ager will ensure all procedures are performed by lab-oratories that comply with the quality managementsystem as addressed in the EMSL QA Manual andthe policies of the accreditation program(s) currentlyheld by the original laboratory. Laboratories mustsubcontract to outside laboratories that maintainaccreditations appropriate for that analysis unlessotherwise directed by the customer.

Sample Processing and Procedures

Quality of Materials

The high quality of materials used in the laborato-ries is ensured through specific purchasing and veri-fication procedures and proper handling techniques. Selection of the appropriate grade of reagent(s) isdesignated in the reagent section of each analyticalSOP and in addition may be specified by the labora-tory manager in unusual circumstances. As a generalpractice, reagents will be of at least ACS reagentquality.

Reagents and standards are purchased in accordancewith the analytical needs of the laboratories as deter-mined by the laboratory manager. When receivedby the laboratory, these items’ labels are dated andinitialed with the date received and expiration datesprovided by the manufacturer, or as assigned by thelaboratory. Labels are also dated and initialed whenopened and/or when reagent mixtures are prepared.

Verification of reagents will consist of confirmingthat the priority grade recorded on the reagent labelconforms to the requirements of the SOP unlessanalysis difficulties indicate a possible problem orregulatory agency requirements specify otherwise. In the latter case, the analytical SOP will identify theappropriate reagent.

Equipment/Instrument Maintenance

The quality and maintenance of equipment plays acritical role in providing quality analytical services.The laboratory manager determines whether eachinstrument is maintained and repaired in house or by an outside source following EMSL administrativeprocedures. Additionally, servicing will be per-formed when a need has been identified by calibra-tion or other QC checks. Where regular mainte-nance schedules are necessary, the schedules are doc-umented in the analytical SOPs and tracked by thelaboratory manager to ensure that all maintenanceschedules are met. Maintenance repair/service file ismaintained for all equipment which includes docu-mentation of the scheduled and unscheduled mainte-nance and repair activities.

Contamination Management

Proper observance of laboratory procedures is neces-sary to guarantee accuracy of results and the safetyof laboratory staff members. Contamination of sam-ples, the environment, and reagents used in analysismust be avoided to provide the highest quality, legal-ly defensible data to our customers. In order toachieve this goal, laboratory staff must adhere to various preventative measures and use defined test-ing procedures for contamination detection as estab-lished by the QA manager.

Contamination is prevented through a combinationof good laboratory practice and housekeeping, aswell as analysis of blank samples and ambient air and surface wipe samples taken from the laboratory. Ifcontamination is detected in any situation, thesource of contamination must be traced and theproblem resolved to prevent recurrence. All actionstaken to resolve a contamination circumstance willbe documented properly and completely in the labo-ratory files.


Reporting Results

The customer report is, ultimately, our “final prod-uct”. The quality of our report reflects on our stan-dard of quality. Final customer reports are releasedonly after data has been approved by the laboratorymanager or designated qualified reviewers. This review includes evaluation of quality control results,calibration measurements, and other controls specified by the method, SOP, and our QAM.

Electronic Data Deliverables (Exported Data)

EMSL delivers lab data in several different electron-ic data formats to many different customers in cus-tom and industry standard formats, includingSEDD, custom CSV formats, excel, PDF, word andRTF formats. The electronically delivered data isnot intended to replace hard copy results. Final,signed customer reports are delivered via mail inaddition to delivery by email or diskette. In this way,exported data can be verified. Electronically trans-mitted results must meet the requirements of theQA policies with the export formats implementedand controlled by the corporate IT staff, which hasthe flexibility to implement new export formats asrequired.

Results On-line via LabConnect®

Lab Reports, Chain-of-Custody, and Invoices areavailable 24/7 via the internet on a secure customerwebsite portal. Documents are posted “real-time”which allows remote customers to see their COC assoon as EMSL processes the samples at log-in.Once the report is reviewed and approved by an authorized signatory, the report with electronic signature is posted to the site as well. These PDFdocuments can be printed by the customer and/orinserted in the customer’s reports or on the cus-tomer’s common share sites, if necessary. The cus-tomer can do a search query for a result by the cus-tomer project number or project name, sample sub-mittal date, or the type of analysis. Customer billingstatements are also available on LabConnect® andcredit card payments can be made as well.

Customer Communications

EMSL seeks feedback from our customers regardingLab performance via our Customer Survey(www.emsl.com – customer survey) as well as maintaining an open dialogue policy between thecustomer and the lab manager and/or National

Directors, the corporate team and/or the quality assurance department. The goal of our open dia-logue policy is clear, continuous and open communi-cation between the laboratory and the customerwhich is one of the keys to maintaining a successful,quality operation. Communication should be estab-lished prior to the start of any work so that any spe-cial instructions, precautions, and/or customer spe-cific needs are clearly understood between laborato-ry and the customer.

Customer complaints regarding the quality of datareceived are thoroughly investigated by EMSL laboratory management. Where errors are found,they will be documented as a non-conformity andhandled via EMSL’s corrective action procedures.Typically, if a customer makes a valid complaintabout a test result, the sample in question will be reanalyzed where possible. If the second resultagrees with the original, the laboratory manager shall advise the customer in writing that a qualitycontrol check has confirmed the original analysis.

The laboratory manager or designee will promptlycommunicate with the customer as it relates to theperformance of the analysis and turnaround time.The laboratory must notify the customer if:

• Analysis is to be done at another EMSLnetwork location;

• Analysis cannot be performed on time;• Integrity of the sample has been jeopardized

(either by the laboratory or the customer or customers shipping/delivery carrier);

• A discrepancy in the analysis has been found during QC analysis. If this deficiency directly affects customer results, the customer will be notified immediately of the problem.

Confidentiality

It is understood that confidentiality and proprietaryrights must be respected throughout the perform-ance of services for any customer or for those thatmay include national security concerns. Informationwill not be given to those for whom it is not intend-ed and the proprietary rights of our customer will beprotected. Data reports and/or other related information will not be given out to any person or agency other than the customer unless we have received prior approval from the customer.


9

10

Q U A L I T Y C O N T R O L S

QA Oversight of Laboratory Quality -Analytical Performance Criteria

Quality control is performed according to the scope of the laboratories accreditation status and quality control requirements for each type of analysis.Performance criteria are maintained for both individ-ual analysts and for the entire laboratory. The stan-dards for acceptance criteria are documented in theEMSL Standard Operating Procedure Manual andthe QA Manual. EMSL continuously monitors theanalytical performance of each laboratory and analyst.Performance is determined using the following crite-ria:

• Results from intra/inter-analyst,and/or intra/inter laboratory QC results and round robin testing plotted against control/acceptance limits.

• Results from calibration measurements plotted against control/acceptance limits.

• Lab performance in proficiency testing programs.

• Results of internal and external on-site quality audits. These audits will verify compliance with all QA and QC policies as documented in the EMSL Quality Assurance Manual and related SOPs.

Demonstration of Traceability

The quality assurance program is designed to providea method which achieves traceability of data tonational standards. This is accomplished by settingrequirements, which include:

• Use of Standard Reference Materials (SRMs) as certified and traceable to the National Institute of Standards and Technology (NIST). SRMs are used for QC analysis and training for achieving performance evaluations of

analysts and overall laboratory accuracy.• Calibration of instrumentation against NIST

traceable standards• Laboratory participation in independent

(non-EMSL) proficiency testing programs • Analysis of consensus standards

Procedures for Dealing with Non-conforming Work

Whenever a deviation from established requirements(i.e., a non-conformity) is discovered, a corrective action review will be initiated in order to determinethe root cause of the problem and decide on what action can be taken to prevent reoccurrence. This review may include a review of QC data, sample tracking, data transcription, instrument calibration,training documentation and discussion with personnel. If the non-conformity resulted in a deficiency that directly affects customer results, thecustomer will be notified immediately of the problem.After the implementation of corrective actions, thelaboratory will conduct follow-up activities to ensurethe effectiveness of those actions.

Customer Support and Access to QC Information

EMSL provides quality assurance information andtechnical support to the customer to assure continuedquality service. The support and information provid-ed in relation to the work performed includes:

• Availability to Lab Accreditations/Certifications applicable to the analysis provided;

• Availability of pertinent QC records; • Access to the Quality Assurance Department

for technical assistance;• Security of data (confidentiality);• Reasonable access to the relevant areas of the

laboratory for the witnessing of analysis;• Archive and record retention programs.

Quality control is the routine application of procedures for obtaining prescribed standards of performance in theanalytical process. EMSL’s quality control program is established and managed by the QA manager in coopera-tion with the National Directors and ensures our laboratories are producing quality data. This process ensuresfulfillment of our commitment to our customers that our data is legally defensible, and that all personnel per-form their responsibilities properly.

Quality control is performed continuously throughout the course of laboratory sample analysis regardless of lab-oratory workload and is made part of the normal course of laboratory sample analysis. QC data is graphed oncontrol charts designed specifically for each analysis type. Quality control is tracked and reviewed daily by thelab manager as part of the sample process and final report approval process. Additionally, quality control sum-mary reports are reviewed by the corporate Quality Assurance Department on a monthly basis.

Q U A L I T Y C O N T R O L S

Accreditation and Certification Programs

EMSL Analytical, Inc. maintains various accredita-tions and certifications all of which require activeand efficient QA/QC programs, participation inproficiency testing programs, etc. with renewalstypically requiring on-site audits and continued acceptable performance in proficiency testing. Labsobtain necessary accreditations/certifications basedon the testing they provide and the state in whichthey do the work. For individual state certifica-tions, multiple labs in the network maintain thatstate’s certification to ensure ample network sup-port. If a customer requests new or additional field-of-testing (FOT) certification for a project orprogram, EMSL may seek to add that certificationdependent on the lab capability and the amount ofwork associated with the request.

EMSL lab accreditation programs (see lab listingfor specific branch lab accreditation) typicallyinclude NVLAP, AIHA, NELAC, A2LA, and homestate certifications as required such as NY ELAP,CA ELAP, NJ DEP, PA DEP, FL DEP, LA DEQ,etc.

Document Preparation and Control

In order to prepare and distribute documents in anorganized fashion, procedures for initiation, prepa-ration, review, approval and issuance of controlledcopies will be followed. EMSL’s document controlprogram is a coordinated effort involving bothtechnical review and custodial control.Laboratories are to use only approved, controlledand current documents for all calibrations, analyses,final reports, and other activities performed in thislaboratory.

Archive and Record Retention Policies

All records associated with analytical data arestored in an organized, safe and retrievable fashion.EMSL stores all records for a minimum of 5 yearsunless otherwise stipulated by customer contract orexternal agency requirements.

External agency requirements are listed below:

Agency Agency Record Retention Requirement

NVLAP 3 Years*

AIHA – IH and EMLAP 3 Years*

AIHA – ELLAP/ EPA NLLAP 5 Years

NYS ELAP 5 YearsWater Data 10 Years

California ELAP 3 Years*Water Data 10 Years*

Texas Department of Health 30 Years

Massachusetts 30 Years(Asbestos Bulk and Air)

Louisiana Department 10 Yearsof Environmental Quality

The NELAC Institute (TNI) 5 Years

CDC ELITE Program for Legionella 5 Years(Cinnaminson, NJ; New York, NY; Indianapolis, IN; Houston, TX; San Leandro, CA)

* EMSL retains all records for a minimum of 5 years even when external requirements allowshorter retention times.

The following records are examples of documentsthat are retained:• Copy of Chain of Custody documents• Original analytical data recording worksheets• Quality control data• All other records relating to the preparation

of the customer report

11

12

A S B E S T O S L A B T E S T I N G S E R V I C E S

AIR by PCM• NIOSH 7400• ASTM D7200 or ASTM D7201• OSHA ID-160

AIR by TEM • AHERA (40 CFR Part 763 Appendix A subpart E)• EPA LEVEL II (Yamate)• NIOSH 7402• ASTM D6281• ISO 10312• ISO 13794 (Indirect Prep)

BULK by PLM• EPA/600/R-93/116

(Calibrated Visual Estimate, reporting limit to <1%) • EPA/600/R-93/116 (400 pt count, reporting limit to <0.25%)• EPA/600/R-93/116 (1000 pt count, reporting limit to <0.1%)• EPA-600/M4-82-020 Interim Method

(400 point count, reporting limit to <0.25%)• NIOSH 9002 (reporting limit to <1%)• PLM EPA NOB-EPA/600/R-93/116

(Calibrated Visual Estimate, reporting limit as low as <0.25%) • PLM EPA NOB-EPA/600/R-93/116

(Gravimetric Reduction Prep 400 pt count, reporting limit to <0.25%)• PLM EPA NOB-EPA/600/R-93/116

(Gravimetric Reduction Prep 1000 pt count, reporting limit to <0.1%)• OSHA ID-191 Modified

BULKS by NYS ELAP Methods• NY ELAP Method 198.1 (for friable samples)• NY ELAP Method 198.6 (PLM with Gravimetric Prep)• NY ELAP Method 198.4 (TEM with Gravimetric Prep)

WATER by TEM• EPA Method 100.2 (Long fibers >10 microns only)• EPA Method 100.2 (All fiber sizes ≥0.5 microns)

BULKS by TEM• TEM EPA NOB - EPA 600/R-93/116 Section 2.5.5.1• TEM % by Mass - EPA 600/R-93/116 Section 2.5.5.2• Chatfield Protocol (semi-quantitative) • TEM Qualitative via Filtration Prep Technique• TEM Qualitative via Drop Mount Prep Technique• NY ELAP Method 198.4 (TEM NOB)

SETTLED DUST by TEM• ASTM D6480 (Wipe)• ASTM D5755 (MicroVac)• ASTM D5756 (MicroVac - Concentration by Mass) • Carpet Sonication EPA/600/J-93/167

SOIL / ROCK / VERMICULITE METHODS• PLM Qualitative• TEM Qualitative• PLM by EPA/600/R-93/116 (Milling Prep with calibrated

visual estimation with reporting limit to <1%)• CARB 435 PLM/TEM• ASTM D 7521 Soil Quantitative PLM and/or TEM• Superfund Elutriator Method TEM• Cincinnati Method 600/R-04/004 (PLM/TEM)

SPECIALIZED ANALYSIS• German VDI-3492 (Asbestos and Fibrous Glass) by SEM • Erionite via SEM/XRD/TEM• Nanoparticle Analysis via TEM/STEM• PCMe• SEM• Specialized Method Development

EMSL Analytical Inc. has over 30 years experience in providing Asbestos Laboratory Services to Environmental/Asbestos Consultants, Engineering Companies, RemediationContractors as well as Government Agencies and Authorities. Our asbestos laboratorynetwork has the largest capacity for sample analysis in the world. This capability is afunction of the collective strength of the operation of our nationwide network of individual laboratories located throughout the U.S. and in Canada.

Each laboratory has trained and experienced staff along with the necessary equipmentand instrumentation to provide quality asbestos analysis for Air, Water, Bulk, Soil and/or

Dust samples by various methodologies (NIOSH, EPA, ASTM, etc.) utilizing PolarizedLight Microscopy (PLM), Phase Contrast Microscopy (PCM), and Transmission Electron

Microscopy (TEM).

Each of our Asbestos Laboratories are accredited by NVLAP with additional certifications as needed per individual statecertification programs and/or AIHA / A2LA accreditation. The labs maintain a five to six day regular work day schedule as well as emergency response plans for off hours and/or weekend operating hours. Samples are received during normalwork hours and Turn-Around-Times (TATs) are tracked when samples are received during normal operating hours of thelaboratory Analytical results Turn-Around-Times offered include same day (3 hr. and 6 hr.), 24hr, 48hr, 72hr, 4 day, 1 week,and 2 week TATs. Costs/rates are weighted based on the Turn-Around-Time requested with our 2 week rates being themost economically cost effective for our customers.

Sample control/processing (log-in, results data-entry, reporting) is facilitated by our computer Laboratory InformationManagement System (LIMS) which tracks the samples and individual projects to meet our clients’ specified due dates and any special instruction requirements. Additionally, the LIMS includes security controls to ensure that information is controlled and locked once the data has been entered by our analysts. Since all labs utilize the same LIMS, all reports are standardized which helps allow us to use multiple labs on the large capacity projects while ensuring that the work is complete and reported in the same format. Asbestos reports are delivered at the choice of the customer by email, fax, and/or hard-copy regular mail. Additionally, all clients have 24/7 real time access to their reports, Chains of Custody, and project invoices via our LabConnect® program. This is a security enabled extranet feature that provides various search options so that our clients can find all project and invoicing information quickly and easily. Key tests include (but not limited to) the following:

13

PCM - Air 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 WeeksNIOSH 7400 $56 $33 $23 $18 $17 $16 $15 $13

NIOSH 7400 - NYS ELAP $56 $33 $23 $18 $17 $16 $15 $13

NIOSH 7400 - B Rules $66 $43 $33 $28 $27 $26 $25 $23

NIOSH 7400 with OSHA Time Weighted Average (TWA) $60 $38 $28 $23 $22 $21 $20 $18

OSHA ID-160 $60 $38 $28 $23 $22 $21 $20 $18

ASTM D7200 or ASTM D7201 $60 $38 $28 $23 $22 $21 $20 $18

TEM - Air* 2.5-3 Hrs** 4-4.5 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 WeeksAHERA (40 CFR Part 763 Appendix A subpart E) $300 $200 $149 $107 $93 $87 $85 $81 $75

EPA LEVEL II (Yamate)*** $300 $200 $149 $107 $93 $87 $85 $81 $75

NIOSH 7402 (Per method: fibers ≥ 0.5 microns) Call Call $169 $127 $113 $107 $105 $101 $95

NIOSH 7402 (All fiber sizes) Call Call $338 $254 $226 $214 $210 $202 $190

ASTM D6281*** Call Call Call $305 $273 $261 $249 $243 $231

ISO 10312*** Call Call Call $305 $273 $261 $249 $243 $231

ISO 13794*** Call Call Call $365 $333 $321 $309 $303 $291

TEM - Water/Aqueous* 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 WeeksEPA Method 100.2 (Long fibers >10 microns only) N/A N/A $245 $159 $153 $147 $135 $123

EPA Method 100.2 (All fiber sizes ≥0.5 microns) N/A N/A $365 $273 $243 $231 $213 $183

Solvents/Oil/Sludge N/A N/A $2,000 $1,400 $1,000 $900 $800 $700

TEM - Settled Dust* 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 WeeksASTM D6480 Wipe*** N/A $425 $185 $171 $153 $141 $129 $123

ASTM D5755 MicroVac*** N/A $425 $185 $171 $153 $141 $129 $123

ASTM D5756 Micro Vac - Concentration by Mass*** N/A $525 $285 $271 $253 $241 $229 $223

Carpet Sonication EPA/600/J-93/167*** N/A $425 $185 $171 $153 $141 $129 $123

TEM Qualitative via Filtration Prep Technique N/A Call $113 $93 $75 $69 $63 $57

TEM Qualitative via Drop Mount Prep Technique $155 $115 $85 $73 $64 $56 $47 $43

* Samples Prepped and not analyzed (eg: Overloaded Samples) are billed at $25 per sample** Same Day Turn-Around-Times (anything less than 24 hours) are subject to restrictions including but not limited to Lab operational hours*** Pricing based on the analysis of up to 10 grid openings

Asb

est

os

Pro

ducts

Asbestos PCM 25 mm 0.8 μm Cassettes - 50 Pack

Product Number: 8715003BList Price: $25.00 USD

Asbestos TEM 25 mm 0.45 μm Cassettes - 50 Pack


Basic Tripod Asbestos/Lead Sampling StandProduct Number: 8706901 List Price: $24.95 USD

EMSL Rotary VaneSampling PumpProduct Number:8706102List Price: $209.00 USD

EMSL Rotary Vane 2 Pump KitProduct Number: 8706103

List Price: $475.00 USD

Primary Standard CalibratorBios Defender 510-H High Flow

300mL/min - 30 L/minProduct Number: 8704013List Price: $1,350.00 USD

EMSL Products CatalogCall 888.958.8170 or Visit www.emsl.com

for a FREE copy!

Volume Discounts Available - Call for Details 1-800-220-3675 • www.emsl.com

Asbestos Laboratory Services


Volume Discounts Available - Call for Details 1-800-220-3675 • www.emsl.com14

PLM - Bulk Building Materials* 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 Weeks

EPA/600/R-93/116 (Calibrated Visual Estimate, reporting limit to <1%) $81 $54 $34 $29 $26 $24 $23 $22

EPA/600/R-93/116 (400 pt count, reporting limit to <0.25%) $156 $104 $64 $54 $49 $46 $44 $40EPA/600/R-93/116 (1000 pt count, reporting limit to <0.1%) $315 $210 $130 $120 $105 $95 $90 $82

EPA-600/M4-82-020 Interim Method (400 point count, reporting limit to <0.25%) $195 $130 $80 $68 $61 $58 $55 $50NIOSH 9002 (reporting limit to <1%) $81 $54 $34 $29 $26 $24 $23 $22

OSHA ID-191 Modified $315 $210 $130 $120 $105 $95 $90 $82Standard Addition Method (add $100 if TEM needed) N/A N/A $364 $304 $244 $214 $204 $184* Fees are per layer (eg: tile and mastic charged separately); Gravimetric Reduction Prep is recommended for problem matrix materials such as NOB's (Non-Friable Organically Bound Materials).

Typical NOB's include but are not limited to: floor tiles, mastics, roofing, caulking, tars, covebase, glazing, etc.

** Same Day Turn-Around-Times (anything less than 24 hours) are subject to restrictions including but not limited to Lab capacity and operational hours.

PLM - Bulk Materials with Problem Matrices such as NOBs (Gravimetric Reduction Prep)* 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 WeeksPLM EPA NOB-EPA/600/R-93/116 (Calibrated Visual Estimate, reporting limit as low as <0.25%) $44 $39 $36 $34 $33 $32

PLM EPA NOB-EPA/600/R-93/116 (400 pt count, reporting limit to <0.25%) $74 $64 $59 $56 $54 $50

PLM EPA NOB-EPA/600/R-93/116 (1000 pt count, reporting limit to <0.1%) $140 $130 $115 $105 $100 $92

* For samples not analyzed due to positive stop, a $10.00 Prep charge will apply. Additional analysis via TEM is recommended if results are ND or less than 1% by PLM NOB. Fees are “per layer” (eg: tile and mastic charged separately).

TEM - Bulk Materials (including NOB Samples)* 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 Weeks

TEM EPA NOB - EPA 600/R-93/116 Section 2.5.5.1 $113 $93 $75 $69 $63 $57

TEM % by Mass - EPA 600/R-93/116 Section 2.5.5.2 $305 $273 $243 $225 $213 $183

Chatfield Protocol (semi-quantitative) $113 $93 $75 $69 $63 $57

TEM Qualitative via Filtration Prep Technique $113 $93 $75 $69 $63 $57TEM Qualitative via Drop Mount Prep Technique $85 $70 $60 $52 $47 $43* For samples not analyzed due to positive stop, a $10.00 NOB Prep charge will apply. Fees are “per layer” (eg: tile and mastic charged separately).

NYS - ELAP Bulk Methods 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 Weeks

NY ELAP Method 198.1 (for friable samples) $81 $54 $34 $29 $26 $24 $23 $22

NY ELAP Method 198.6 (PLM with Gravimetric Prep)* N/A N/A $44 $39 $36 $34 $33 $32

NY ELAP Method 198.4 (TEM)*** Call Call $103 $83 $65 $59 $53 $47* For samples not analyzed due to positive stop, a $10.00 Prep charge will apply. Fees are “per layer” (eg: tile and mastic charged separately). ** Same Day Turn-Around-Times (anything less than 24 hours) are subject to restrictions including but not limited to Lab operational hours.*** Add $10 NOB Sample Prep Fee if not previously prepped via PLM NOB step.

Asb

est

os

Pro

duct

s Rotameter 0.4 - 4 L/minProduct Number: 8704203List Price: $48.00 USD

Rotameter 1 - 20 L/minProduct Number: 8704204List Price: $48.00 USD

Wonder Makers Bulk Sampling KitProduct Number: 8708001


Whirl-Pak Bags

2 oz Write-On Bags - 500 qtyProduct Number: 8708908 List Price: $38.50 USD

4 oz Write-On Bags - 500 qtyProduct Number: 8708909 List Price: $40.00 USD

Zip-Bag 3"x5" Write-On - 500 Pk Product Number: 8708910 List Price: $14.00 USD EMSL Diaphragm Sampling 2 Pump Kit

Product Number: 8706105List Price: $439.00 USD

EMSL Diaphragm Sampling PumpProduct Number: 8706104List Price: $175.00 USD


15Volume Discounts Available - Call for Details 1-800-220-3675 • www.emsl.com

Asb

est

os

Pro

ducts

SOIL/ROCK METHODS 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 Weeks

PLM by EPA/600/R-93/116 (milling prep with Calibrated Visual Estimate, reporting limit to <1%) $116 $89 $69 $64 $61 $59 $58 $57

PLM by EPA/600/R-93/116 (milling prep with 400 Point Count, reporting limit to <0.25%) $356 $254 $189 $164 $139 $114 $89 $64PLM by EPA/600/R-93/116 (milling prep with 1000 Point Count, reporting limit to <0.1%)* $431 $329 $229 $204 $179 $154 $129 $104

TEM by EPA/600/R-93/116 (milling prep with VAE, reporting limit to <1%)* N/A N/A $300 $270 $245 $220 $190 $165

CARB 435 PLM Level A (reporting limit to 0.25%) $356 $254 $189 $164 $139 $114 $89 $64

CARB 435 PLM Level B (reporting limit to 0.1%)* $431 $329 $229 $204 $179 $154 $129 $104

CARB 435 TEM Level B (reporting limit to 0.1%) N/A N/A $335 $303 $273 $243 $213 $183

CARB 435 TEM Level C (reporting limit to 0.01%)* N/A N/A $375 $338 $303 $278 $248 $218ASTM D 7521 Soil Method PLM Quantitative with TEM Qualitative check for negative samples N/A N/A $225 $195 $170 $155 $120 $105

ASTM D 7521 Soil Method TEM Quantitative*** N/A N/A $143 $123 $105 $99 $93 $87PLM Qualitative (Asbestos Detect/Non Detect only) $81 $54 $34 $29 $26 $24 $23 $22

TEM Qualitative via Filtration Prep Technique N/A Call $113 $93 $75 $69 $63 $58TEM Qualitative via Drop Mount Prep Technique Call Call $85 $70 $56 $52 $47 $43

Elutriator Method (Releasable fibers) N/A N/A N/A N/A N/A Call $1,278 $1,128* Lower Reporting Limits Available - Call For Details/Pricing.

** Same Day Turn-Around-Times (anything less than 24 hours) are subject to restrictions including but not limited to Lab capacity and operational hours.

*** $100 Prep Fee will be Additionally Charged if TEM Analysis does not follow the PLM Prep and Analysis.

VERMICULITE METHODS 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 Weeks

PLM Qualitative (Asbestos Detect/Non Detect only) $81 $54 $34 $29 $26 $24 $23 $22

TEM Qualitative via Filtration Prep Technique N/A Call $113 $93 $75 $69 $63 $57TEM Qualitative via Drop Mount Prep Technique Call Call $85 $70 $56 $52 $47 $43

PLM by EPA/600/R-93/116 (milling prep with Calibrated Visual Estimate, reporting limit to <1%)* $116 $89 $69 $64 $61 $59 $58 $57CARB 435 PLM Level A (reporting limit to 0.25%) $356 $254 $189 $164 $139 $114 $89 $64

CARB 435 PLM Level B (reporting limit to 0.1%)* $431 $329 $229 $204 $179 $154 $129 $104CARB 435 TEM Level B (reporting limit to 0.1%)* N/A N/A $335 $303 $273 $243 $213 $183

Cincinnati Method EPA 600/R-04/004 PLM Only N/A N/A N/A N/A $210 $192 $180 $150Cincinnati Method EPA 600/R-04/004 TEM*** N/A N/A N/A N/A $150 $145 $140 $130

PLM & TEM (Specialized Methodologies Available) Call for Quote* Lower Reporting Limits Available - Call For Details/Pricing.

** Same Day Turn-Around-Times (anything less than 24 hours) are subject to restrictions including but not limited to Lab operational hours.

*** $100 prep fee applied to samples not previously analyzed by PLM.

SPECIALIZED ANALYSIS 3 Hrs** 6 Hrs** 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks

German VDI-3492 (Asbestos and Fibrous Glass by SEM) N/A N/A $1,225 $963 $770 $630 $525 $350

PLM on Bulk Radiological Samples via EPA/600/R-93/116*** $250 $200 $150 $125 $100 $80 $75 $60Erionite via SEM/XRD/TEM/STEM (bulk/soil/rock/air) N/A N/A $350 $300 $275 $265 $250 $175

Nanoparticle Analysis via TEM w/EDXA; Air, Bulk, Surface Dust and Water PLEASE CALL FOR DETAILSCustomized Analysis and Reporting including SEM, PCMe, Particle ID, PLEASE CALL FOR DETAILSParticle Size Distribution, etc.

Digital Photos $15 per Photo** Same Day Turn-Around-Times (anything less than 24 hours) are subject to restrictions including but not limited to Lab operational hours.

***Advanced notice prior to shipping required. Sample analysis only conducted at EMSL Corporate Headquarters. All remaining sample material and minimal contact waste from any radioactively contaminated samples

will be returned to the client for disposal. If EMSL is responsible for sample disposal, an additional Radiological disposal fee will be charged.

North 1/2 Face MaskSmall-Product Number: 8705001

List Price: $22.95 USDMedium-Product Number: 8705002

List Price: $22.95 USDLarge-Product Number: 8705003


Tyvek Suit Hood and Boots2XL Product Number: 8705200

List Price: $127.95 USDAll Sizes Available

Sensidyne BDX-IIProduct Number: 8706204



for a FREE copy!

FLAME AA• Paint Chips (SW-846-7000B)• Wipes (SW-846-7000B)• Air (NIOSH 7082)• Soil (SW-846-7000B)• Wastewater (SW-846-7000B)

GRAPHITE FURNACE AA • Drinking Water (EPA 200.9)• Wastewater (SW-846-7421)• Air (NIOSH 7105)• Soil (SW-846-7421)

ICP/ICP-MS• Wastewater (SW-846-6010B/200.7)• Soil (SW-846-6010B)• Wipes (SW-846-6010B)• Air (NIOSH 7300)

TCLP (Flame AA)• Toxicity Characteristic Leaching Procedure

TTLC (Flame AA)• Total Threshold Limit Concentration

STLC (Flame AA)• Soluble Threshold Limit Concentration

TSP LEAD (ICP-MS)• Lead in Suspended Particulate Matter (40 CFR Part 50)

CONSUMER PRODUCTS• Total Lead in Paint and Surface Coatings• Total Lead in Children's Metal Jewelry/Products• Total Lead in Children's Non-Metal Products

L E A D ( P b ) L A B S E R V I C E S

EMSL Analytical Inc. provides Lead (Pb) testing analysis for Bulk Samples (paint chips, debris, or materials), Air Samples, Wipe Samples, Waste Water and Drinking Water, and

Soil Samples as well as for Consumer Products. Each laboratory has trained and experienced staff along with the necessary lab certification(s) to provide Lead Analysisby various methodologies including NIOSH, EPA Standard Methods, ASTM, and/orCDC, utilizing Flame Atomic Absorption Spectrometers, Graphite Furnace AtomicAbsorption, Inductively Coupled Plasma (ICP), and/or ICP-Mass Spectrometer. TheEMSL analytical process for lead analysis and reporting of the individual sample is part

of an overall program that includes analysis of Quality Control Samples (spikes) and programs such as Instrument QC controls, calibration standard checks, duplicates, and

reporting limit controls to ensure the confidence limits of the data are within the acceptablerange as specified by the method requirements and our Quality Control Programs.

Each of our Lead Labs are accredited by AIHA or A2LA and additional certification as needed per individual state andcity certifications, where applicable.. Lead Labs maintain a five or six day operational hours schedule as well as emer-gency response plan for off hours and/or weekend operating hours. Samples are received during normal work hours andturnaround times are tracked on business days from the time samples are received during normal operating hours of thelaboratory. Laboratories that maintain 24/7 hours (ie: NYC,) and/or extended routine hours, will track TAT’s during alllab hours. Lead Analysis Turn-Around-Times offered include same day (3 hr. and 6 hr.), 24 hr, 48 hr, as well as 3 day, 4day, 1 week, and 2 week TATs. Costs/rates are weighted based on the Turn-Around-Time requested with our 2 weekrates being the most economically cost effective for our customers.

Sample control/processing (log-in, results data-entry, reporting) is facilitated by our computer Laboratory InformationManagement System (LIMS) which tracks the samples and individual projects to meet our clients’ specified due datesand any special instructions requirements. Additionally, the LIMS includes security controls to ensure that informationis controlled and locked once the data has been entered by our analysts. Since all labs utilize the same LIMS, all reportsare standardized which helps allow us to use multiple labs on the large capacity projects while ensuring that the work isdone and reported in the same format. The reports are delivered at the choice of the customer which would includeemail, fax, and/or hard-copy regular mail. Additionally all clients have 24/7 real time access to their reports, Chains ofCustody, and project invoices via our LabConnect® program. This is a security enabled extranet feature that providesvarious search options so that our clients can find all project and invoicing information quickly and easily. Key tests include (but not limited to) the following:

16

Lead (Pb) Laboratory Services


FLAME AA 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 WeeksPaint Chips (SW-846-7000B) $106 $56 $33 $28 $26 $23 $21 $18Wipes (SW-846-7000B) $106 $56 $33 $28 $26 $23 $21 $18Air (NIOSH 7082) $106 $56 $33 $28 $26 $23 $21 $18Soil (SW-846-7000B)*** Call $61 $38 $33 $30 $27 $26 $23Wastewater (SW-846-7000B) Call $61 $38 $33 $30 $27 $26 $23** Same Day Turn-Around-Times (anything less than 24 hours) are subject to restrictions including but not limited to Lab operational hours.

*** Add $100-$150 per sample if Multi-Incremental Sampling (MIS) lab sub-sampling prep is requested (for 1-2 Week TAT)

GRAPHITE FURNACE Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksDrinking Water (EPA 200.9) Call $87 $57 $45 $39 $35 $33Wastewater (SW-846-7010/7421) Call $87 $57 $45 $39 $35 $33Air (NIOSH 7105) Call $87 $57 $45 $39 $35 $33Soil (SW-846-7010/7421)*** Call $87 $57 $45 $39 $35 $33*** Add $100-$150 per sample if Multi-Incremental Sampling (MIS) lab sub-sampling prep is requested (for 1-2 Week TAT)

ICP Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksWastewater (SW-846-6010C/200.7) Call Call $66 $55 $44 $39 $35Soil (SW-846-6010C)*** Call Call $66 $55 $44 $39 $35Wipes (SW-846-6010C) Call Call $66 $55 $44 $39 $35Air (NIOSH 7300 modified) Call Call $55 $44 $36 $33 $26*** Add $100-$150 per sample if Multi-Incremental Sampling (MIS) lab sub-sampling prep is requested (for 1-2 Week TAT)

TCLP (Flame AA) 32 Hrs 2 Days 3 Days 4 Days 1 Week 2 WeeksToxicity Characteristic Leaching Procedure $250 $123 $80 $69 $64 $60

TTLC (Flame AA) 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksTotal Threshold Limit Concentration $38 $33 $30 $27 $26 $23

STLC (Flame AA) 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksSoluble Threshold Limit Concentration N/A N/A $159 $135 $99 $75

TSP Lead (ICP-MS) 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksLead in Suspended Particulate Matter (40 CFR Part 50: by ICP-MS)* $109 $85 $73 $67 $61 $55* TSP Gravimetric Analysis additional if requested

Consumer Products Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksTotal Lead in Paint and Surface Coatings* 16 CFR 1303/CPSC-CH-E1003-09.1 Call $210 $150 $120 $96 $85 $70Total Lead in Children's Metal Jewelry/Products CPSC-CH-E1001-08.1 Call $210 $150 $120 $96 $85 $70Total Lead in Children's Non-Metal Products CPSC-CH-E1002-08 Call $210 $150 $120 $96 $85 $70* Additional metals may be analyzed @ $10 per element

See page 44 for additional consumer product testing options

Ghost WipesProduct Number: 8708100Included in Analytical Fee,

Restrictions Apply, Call for Details

Centrifuge TubesProduct Number: 8708907Included in Analytical Fee, Restrictions Apply, Call for Details

ZEFON Lead Cassettes37 mm 0.8 μm MCE50 PackProduct Number: 8715200BList Price: $45.00

BUCK Libra L-4Product Number: 8706200


BUCK Libra L-4 Kit5 Pumps with 5 Single

Chargers and CaseProduct Number: 8706201

List Price: $1,400.00 USD

Luer Adapters 12 PackProduct Number: 8704300

List Price: $8.50 Pb P

roducts

17


for a FREE copy!

18

ENVIRONMENTAL MICROBIOLOGY LAB SERVICES

FUNGI (MOLD & YEAST)• Spore Trap Analysis• DNA Sequencing• PCR• ERMI/ARMI• Pollen ID• ID and Enumeration of Culturable Fungi

(Genus Level ID)• ID and Enumeration of Culturable Fungi (Includes

Species ID of Penicillium, Aspergillus, Cladosporium and Stachybotrys)

• Expanded Fungal Species ID Services• ID of Fungal Structures via Direct Examination

(Tape Lift, Bulk, Swab, Wipe)• Cryptococcus neoformans• Histoplasma capsulatum

WATER ANALYSIS• Heterotrophic Plate Count (HPC) • Total Coliform w/ E. coli screen • Fecal Coliform • Fecal Streptococcus • Enterococci • Legionella • Pseudomonas aeruginosa• Microscopic Algae Screen

BACTERIA• Bacteroides• DNA Sequencing• PCR• ID and Enumeration of Culturable Bacteria• Pseudomonas aeruginosa • Sewage Contamination in Buildings • Mycobacteria • Salmonella • Iron-Related Bacteria (IRB)• Sulfate-Reducing Bacteria (SRB)• Slime-Forming Bacteria (SLYME)• Biofilm-Associated Bacteria

(Group: IRB, SRB, SLYME)• Denitrifying Bacteria (DN)• Nitrifying Bacteria (N)• Heterotrophic Aerobic Bacteria (HAB)• Endotoxin Testing

MYCOTOXINS • Solution Fluorimetry • HPLC Analysis • Custom HPLC Analysis• Stachybotrys Toxins by ELISA

VIRUSES • Enteroviruses by PCR

EMSL Analytical Inc. provides Microbiology Laboratory Services for testing related to theEnvironment and/or Indoor Air Quality at our network of laboratories in key cities

nationwide. Our qualified staff includes degreed (Ph.D.s, MSc, M.P.H.) microbiologists,mycologists, and bacteriologists. Our bench analysts and technicians have a minimum of a B.S. degree and must complete a rigorous training program before reporting resultsindependently. In addition to offering the traditional direct exams (spore traps and tape lifts) and culture methodologies, we also use state of the art equipment such as GC-FAME and PCR for identifying individual bacterial and fungal species.

Our key microbiology laboratories maintain accreditation under the American IndustrialHygiene Association (AIHA) or the American Association for Laboratory Accreditation

(A2LA) environmental microbiology accreditation program. Additionally, we participate inthe U.S. CDC Environmental Legionella Isolation Techniques Evaluation (ELITE) Program

for Legionella analysis as well as state proficiency programs for bacteriological testing of drinkingwater, wastewater, and sewage sludge. We also offer customized special project design for non-routine analysis utilizing ASTM, USP, EPA, APHA, AATCC, ISO, JIS, NSF, OECD, MIL, ASM as well as internationally developedtest methodologies.

All Microbiology Labs maintain a five business day lab operation schedule. We have emergency response plans in placefor off hours and/or weekend operating hours when needed. Turn-Around-Times (TAT) are tracked by the number of business days from the time samples are received in the lab. Microbiology TATs for direct exams include same day(3 hr. and 6 hr.), 24 hour, 48 hour as well as 3 day, 4 day, 1 week, and 2 week TATs. Culture analyses are provided witha 6-14 day turnaround based on the individual incubation period requirements. Costs/rates are weighted based on theTurn-Around-Time requested with our 2 week TAT rates the most economically cost effective rates for our customers.

Sample control/processing (log-in, results data-entry, reporting) is facilitated by our computer Laboratory InformationManagement System (LIMS) which tracks individual projects to meet our clients’ specified due dates. Additionally, theLIMS includes security controls to ensure that information is controlled and locked once the data has been entered by our analysts. Since all labs utilize the same LIMS, all reports are standardized which allows for network support(intra-lab transfer) for sample overcapacity issues. We offer a variety of reporting formats for our most popular testsincluding our Expanded Fungal Report and ASSESSMENTReport™ for total spore count and direct exam analyses.We can also design customized reporting options for long term and special projects. Reports are delivered dependingupon client preference (email, Lab-Connect®, fax, or all). All clients have 24/7 real time access to their reports, Chainsof Custody, and project invoices via our LabConnect® internet portal. This is a security-enabled extranet feature thatprovides various search options so that our clients can find all project and invoicing information quickly and easily.Key tests include (but not limited to) the following:


Environmental Microbiology Laboratory Services

FUNGI (Mold) NON-CULTURABLE AIR SAMPLES (Spore Traps)* Code 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 Weeks

Total Fungal Spore Count w/ Pollen, Skin, Insect Fragments & Background Density

Air-O-Cell M001 $186 $125 $71 $65 $59 $53 $43 $41

Allegro M2 (2 samples) M173 $372 $250 $142 $130 $118 $106 $86 $82

Allergenco M004 $186 $125 $71 $65 $59 $53 $43 $41

Allergenco-D M032 $186 $125 $71 $65 $59 $53 $43 $41

BioSIS M049 $186 $125 $71 $65 $59 $53 $43 $41

Burkard M003 $186 $125 $71 $65 $59 $53 $43 $41

Cyclex M043 $186 $125 $71 $65 $59 $53 $43 $41

Cyclex-d M002 $186 $125 $71 $65 $59 $53 $43 $41

Micro5 M030 $186 $125 $71 $65 $59 $53 $43 $41

MoldSnap M174 $186 $125 $71 $65 $59 $53 $43 $41

Relle Smart M176 $186 $125 $71 $65 $59 $53 $43 $41

Via-Cell M130 $186 $125 $71 $65 $59 $53 $43 $41

Versa Trap M172 $186 $125 $71 $65 $59 $53 $43 $41Pollen-ID & Enumeration of Pollen M169 $201 $151 $131 $121 $111 $101 $91 $81

* Expanded Fungal Report available at no additional charge

FUNGI-CULTURABLE AIR SAMPLES (Impactors, Impingers, Cassettes) Code 3 Hrs** 6 Hrs** 24 Hrs 2 Days 3 Days 4 Days 1 Week 2 Weeks

Identification and Enumeration of Culturable Fungi (Genus Level ID) M005 N/A N/A N/A N/A N/A N/A N/A $65

Identification and Enumeration of Culturable Fungi M006 N/A N/A N/A N/A N/A N/A N/A $107

(Includes Species ID of Penicillium, Aspergillus, Cladosporium and Stachybotrys)

Expanded Fungal Species ID Services CALL FOR PRICING

FUNGI-SURFACE SAMPLES (Tape Lift, Bulk, Swab, Wipe, Dust, Contact Plate) Code 3 Hrs** 6 Hrs** 24 Hrs 48 Hrs 72 Hrs 96 Hrs 1 Week 2 Weeks

Identification of Fungal Structures via Direct Examination M041 $186 $125 $71 $65 $59 $53 $43 $41

(Tape Lift, Bulk, Swab, Wipe)*


(Genus Level ID from Bulk, Swab, Wipe, Dust, or Contact Plate)


(Includes Species ID of Penicillium, Aspergillus, Cladosporium and Stachybotrys from Bulk, Swab, Wipe, Dust, or Contact Plate)

Expanded Fungal Species ID Services CALL FOR PRICINGMacroscopic Fungi (Mushroom) Identification M112 N/A N/A N/A N/A N/A N/A N/A $200

Acid Producing Fungi (P/A) M239 N/A N/A N/A N/A N/A N/A N/A $120Acid Producing Fungi [Isolate ID] M240 N/A N/A N/A N/A N/A N/A N/A $120

* Expanded Fungal Report available at no additional charge

** Same Day Turn-Around-Times (anything less than 24 hours) are subject to restrictions including but not limited to Lab operational hours.

Bio-Pump PlusProduct Number: 8706002


Buck BioAire IAQ PumpProduct Number: 8706003


Air-O-Cell - 50 PackProduct Number: 8715301B

List Price: $199.00 USDEMSL Mold Investigation Kits

Mold Sampling Kit - Basic with Air-O-CellProduct Number: 8706301


Envi

ronm

enta

lM

icro

bio

logy

Pro

duct

s

20



Envi

ronm

enta

l M

icro

bio

logy

Pro

duct

s

Sterile SwabsIncluded in Analytical Fee,


AGAR PlatesIncluded in Analytical Fee,

Type Varies by Analysis Objective, Restrictions Apply,

Call for Details

BACTERIA-WATER ANALYSIS Code 24 Hrs 2 Days 3 Days 4 Days 1 Week 2 Weeks 3 WeeksHeterotrophic Plate Count SM 9215 M015 N/A N/A N/A N/A N/A $35 N/AHeterotrophic Plate Count with Bacterial ID M016 N/A N/A N/A N/A N/A $101 N/ATotal Coliform w/ E. coli screen (SM 9223B Chromogenic Substrate Coliform Test, Presence or Absence) M017 N/A $71 $65 $59 $53 $47 N/ATotal Coliform (SM 9222B Membrane Filtration Technique) M018 N/A N/A N/A N/A N/A $35 N/AFecal Coliform (SM 9222D Membrane Filtration Technique) M019 N/A N/A N/A N/A N/A $35 N/AFecal Streptococcus (SM 9230C Membrane Filtration Technique) M020 N/A N/A N/A N/A N/A $47 N/AEnterococci (SM 9230C Membrane Filtration Technique) M029 N/A N/A N/A N/A N/A $47 N/AEnterococci (Enterolert, Presence or Absence) M129 N/A $71 $65 $59 $53 $47 N/AEscherichia coli (SM 9222G Membrane Filtration Technique) M021 N/A N/A N/A N/A N/A $35 N/AEscherichia coli (SM 9223B Chromogenic Substrate E. coli Test, Presence or Absence) M022 N/A $65 $59 $47 $41 $35 N/APseudomonas aeruginosa (SM 9213E Membrane Filtration Technique) M024 N/A N/A N/A N/A N/A $65 N/ASewage Screen (Total Coliform, Fecal Coliform, E. coli & Fecal Streptococcus) M025 N/A N/A N/A N/A N/A $107 N/ASewage Screen- Presence/Absence (Total Coliform, E. coli, Enterococci) M115 N/A $113 N/A N/A N/A N/A N/ASewage Screen- MPN (Total coliform, E. coli, Enterococci) M116 N/A $137 N/A N/A N/A N/A N/ARecreational Water Screen M026 N/A N/A N/A N/A N/A $107 N/A(SM 9213 Total Coliform, Fecal Coliform, Staphylococcus and Streptococcus)

BACTERIA Code 24 Hrs 2 Days 3 Days 4 Days 1 Week 2 Weeks 3 WeeksGram Stain and Enumeration of Culturable Bacteria M009 N/A N/A N/A N/A N/A $65 N/AIdentification and Enumeration of Culturable Bacteria (Up To Three Types) M010 N/A N/A N/A N/A N/A $101 N/AIdentification and Enumeration of Culturable Bacteria (Up To Five Types) M011 N/A N/A N/A N/A N/A $125 N/APseudomonas aeruginosa Detection M012 N/A N/A N/A N/A N/A $65 N/ASewage Contamination in Buildings M013 N/A N/A N/A N/A N/A $125 N/A(Total Coliform, Fecal Coliform, E. coli, & Fecal Streptococcus)Sewage Contamination in Buildings (modified) M117 N/A $113 N/A N/A N/A N/A N/A(Total coliform, E. coli, Enterococci)Mycobacteria Detection and Enumeration M031 CALL FOR PRICINGMRSA-Methicillin-Resistant Staphylococcus aureus M133 N/A N/A $107 $95 $83 $71 N/AAnthrax-Isolation and Presumptive Identification of Bacillus anthracis M047 N/A N/A N/A N/A N/A $185 N/A(Must be pre-arranged with Lab- only performed in Raleigh, NC lab)Salmonella (In Sludge) (SM 9260D) Detection and Enumeration M048 N/A N/A N/A N/A N/A $125 N/AIron-Related Bacteria (IRB) M121 N/A N/A N/A N/A N/A N/A $60Sulfate-Reducing Bacteria (SRB) M122 N/A N/A N/A N/A N/A N/A $60Slime-Forming Bacteria (SLYME) M123 N/A N/A N/A N/A N/A N/A $60Biofilm-Associated Bacteria (Group test: IRB, SRB, SLYME) M125 N/A N/A N/A N/A N/A N/A $180Acid Producing Bacteria (APB) M238 N/A N/A N/A N/A N/A $65 N/ADenitrifying Bacteria (DN) M126 N/A N/A N/A N/A N/A $65 N/ANitrifying Bacteria (N) M127 N/A N/A N/A N/A N/A $65 N/AHeterotrophic Aerobic Bacteria (HAB) M128 N/A N/A N/A N/A N/A $65 N/AStaphylococcus aureus Detection and Enumeration M134 N/A N/A N/A $123 $103 $88 N/AVRE-Vancomycin-Resistant Enterococcus M135 N/A N/A N/A N/A N/A $120 N/AStreptococcus pyogenes Detection and Enumeration M136 N/A N/A N/A N/A N/A $70 N/AClostridium difficile (C.diff) Detection and Enumeration M137 N/A N/A N/A N/A N/A $145 N/AClostridium perfringens Detection and Enumeration M138 N/A N/A N/A N/A N/A $145 N/ASalmonella Detection and Enumeration M250 N/A N/A N/A N/A N/A $80 N/AVibrio Detection and Enumeration M119 N/A N/A N/A N/A N/A $125 N/ATotal Coliform & E. coli Enumeration (Colilert MPN Method SM9223) M114 N/A $88 $83 $78 $73 $65 N/AAnaerobic Bacteria M148 Call for Price and TAT

ALGAE Code 24 Hrs 2 Days 3 Days 4 Days 1 Week 2 Weeks 4 Weeks

Microscopic Algae Screen (Micro-Algae) M124 N/A N/A N/A N/A N/A N/A $63

Microbiology Water Sample Bottles

Various Sizes and UsesIncluded in Analytical Fee,




LEGIONELLA CULTURE Code 24 Hrs 2 Days 3 Days 4 Days 1 Week 2 Weeks 6 WeeksLegionella Detection (CDC/ISO/SM9260J method Presence/Absence) M210 N/A N/A N/A N/A N/A $96 N/A

Legionella Detection (CDC/ISO/SM9160J method culture and enumeration

of Legionella pneumophila) M023 N/A N/A N/A N/A N/A $108 N/A


of Legionella pneumophila plus individual serotyping 1-14) M211 N/A N/A N/A N/A N/A $120 N/A


of 9 Legionella species and serotyping including Legionella pneumophila 1-14) M212 N/A N/A N/A N/A N/A $156 N/A

Legionella Detection (CDC Heat Enrichment method or technique.

For samples that are negative upon primary culture. Heat enrichment improves M213 N/A N/A N/A N/A N/A N/A $250

the recovery of legionellae significantly from samples containing protozoans.)

Pure Culture preparation and storage per isolate M214 $60 per Isolate

Pure Culture preparation and shipping per isolate M215 $120 per Isolate

AVIAN PATHOGENS Code 24 Hrs 2 Days 3 Days 4 Days 1 Week 2 Weeks 8 WeeksDetection and Enumeration of Viable Cryptococcus neoformans M028 N/A N/A N/A N/A N/A $65 N/A

Detection and Enumeration of Viable Histoplasma capsulatum M120 N/A N/A N/A N/A N/A N/A $185

ENDOTOXIN Code 24 Hrs 2 Days 3 Days 4 Days 1 Week 2 WeeksEndotoxin Testing (Kinetic LAL Assay) M014 $425 $305 $197 $155 $125 $107

USP 797 ENVIRONMENTAL MONITORING Code 24 Hrs 2 Days 3 Days 4 Days 1 Week 2 WeeksUSP 797 - Fungal Count M401 N/A N/A N/A N/A N/A $30

USP 797 - Fungal ID M402 N/A N/A N/A N/A N/A $50

USP 797 - Bacterial Count M403 N/A N/A N/A N/A N/A $30

USP 797 - Bacterial ID M404 N/A N/A N/A N/A N/A $50

21

Envi

ronm

enta

l M

icro

bio

logy

Pro

duct

s

EMSL VP-400 Single Stage Microbial SamplerProduct Number: 8709001


E-Lite IAQ Sampling PumpProduct Number: 8706004


Bio-Tape25 Pack, 8708325


MYCOTOXINS (minimum $250 charge for all mycotoxin projects)Individual Mycotoxin Analysis by LC-MS (Detection limit ppb/ppt) Code Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksAflatoxin B1,B2,G1,G2 M302 Call Call Call Call Call $150 $130

Ochratoxin A M313 Call Call Call Call Call $145 $125

Sterigmatocystin M316 Call Call Call Call Call $150 $125

Zearalenone M318 Call Call Call Call Call $140 $115

Mycotoxin Group/Panel Analysis by LC-MS (Detection limit ppb/ppt) Code Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks

Asp/Pen Panel #9 Ochratoxin A, and Sterigmatocystin M358 Call Call Call Call Call $255 $235

Asp/Pen Panel #10 Ochratoxin A, and Sterigmatocystin M359 Call Call Call Call Call $365 $345

Trichothecene Group Analysis (Stachybotrys toxins) by ELISA (Detection limit ppb) Code Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksIsosatratoxin F, Roridin A, Roridin E, Roridin H, Roridin L-2, Satratoxin G, M366 Call Call Call $290 $270 $260 $240

Satratoxin H, Verrucariol, Verucarin A, Verucarin J

Mycotoxin Group Analysis by VICAM (Detection limit ppb) Code Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks

Aflatoxin B1,B2,G1,G2 M367 Call Call Call Call Call $150 $130

Ochratoxin A M368 Call Call Call Call Call $145 $125

Aflatoxin B1,B2,G1,G2, and Ochratoxin A M369 Call Call Call Call Call $175 $135

Microbiology Special Projects

22 Volume Discounts Available - Call for Details 1-800-220-3675 • www.emsl.com

Microbiology Special Projects Code Method Minimum Price Per Sample

Determining the Activity of Incorporated Antimicrobial Agent(s) in Polymeric or Hydrophobic Materials M501 ASTM E2180 $800

Determining antimicrobial activity of immobilized antimicrobial agents under dynamic conditions M521 ASTM E2149 $500

Determining Resistance of Synthetic Polymeric Materials to Fungi M502 ASTM G21 $700

Mildew (fungus) resistance of paper and paperboard M522 ASTM D2020 $700

Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by M504 ASTM E1428 $300Streptoverticillium reticulum (a pink stain organism)

Determining Fungi resistance of Insulation Materials and Facings M505 ASTM C1338 $800

Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber M506 ASTM D3273 Call for Quote

Resistance of emulsion paint in the container to attack by organisms M523 ASTM 2574 $800

Enumeration of Viable Bacteria and Fungi in Liquid Fuels M507 ASTM D6974 $500

Antimicrobial Products- Test for Antimicrobial Activity and Efficacy M508 JISZ 2801 $1,200

Action of Microorganisms to Plastics M509 ISO 846 Call for Quote

Resistance to Fungal Growth and Performance in Devices M510 Military std. 508.5 Call for Quote

Assessment of Antimicrobial Activity Using a Time-Kill Procedure M524 Method ASTM E2315 Call for Quote

Assessment of Antibacterial Finishes in Textiles M511 AATCC 100 $700

Antibacterial Activity Assessment of Textile Materials: Parallel Streak Method M512 AATCC 147 $500

Antimicrobial Activity Assessment on Carpet M513 AATCC 174 Call for Quote

Antifungal Activity Assessment on Textile Materials M514 AATCC 30 Call for Quote

Mildew and Rot Resistance of Textile Materials M515 AATCC 30 Call for Quote

Fungicidal Activity of Disinfectants M516 AOAC 955.17 Call for Quote

Bactericidal Activity of Disinfectants M517 AOAC 955.12, 955.13, 955.14 Call for Quote

Minimum Inhibitory Concentration M518 MIC Call for Quote

Minimum Lethal Concentration M519 MLC Call for Quote

Kirby Bauer Antibiotic Testing M520 $300

TurnAround Times are Determined by Laboratory Testing Schedule. Additional Services: Method Development and Validation; Product Development; Shelf Life and Stability Testing.

** Same Day Turn-Around-Times (anything less than 24hrs) are subject to restrictions including but not limited to Lab operational hours.

Volume Discounts Available - Call for Details 1-800-220-3675 • www.emsl.com 23

Microbiology Special Projects

Aquatic Microbiology - Algae Code 1 Week 2 Weeks

Phytoplankton identification (division level) M600 Call $45

Phytoplankton identification (genus level) M601 Call $75

Phytoplankton enumeration (total cell count) M602 Call $50

Phytoplankton identification and enumeration (genus level) M603 Call $125

Phytoplankton identification and enumeration (species level) M604 Call $250

Phytoplankton identification, enumeration, and biovolume (genus level) M605 Call $225

Phytoplankton identification, enumeration, and biovolume (species level) M606 Call $325

Periphyton (attached algae) identification and enumeration (division level) M607 Call $175

Periphyton (attached algae) identification and enumeration (genus level) M608 Call $250

Periphyton (attached algae) identification and enumeration (species level) M609 Call $500

Additional acid cleaning for diatom identification M621 Call $110

Algae permanent slide HPMA (3 slides per sample) M610 $170 $120

Algae permanent slide Naprax diatom (3 slides per sample) M611 $210 $160

Biomass-Dry weight M612 $85 $50

Biomass-Ash-free dry weight M613 $85 $60

Chlorophyll a M614 $85 $50

Chlorophyll a & Pheophytin a M615 $95 $60

Chlorophyll a, b, c and Pheophytin a M616 $115 $80

Taste and Odor Test (Geosmin and 2-MIB) M617 Call $275

Aquatic Microbiology - Algae Toxins Code 1 Week 2 Weeks

Microcystin M618 $175 $95

Cylindrospermopsin M619 $175 $95

Saxitoxin M620 $175 $95

Aquatic Microbiology - Protozoa Code 1 Week 2 Weeks

Cryptosporidium and Giardia (EPA 1623.1) M640 $695 $510

Matrix Spike for M640 M641 $550 $350

Additional filter analysis (turbid samples) for M640 M642 $550 $350

Additional subsamples (per slide) for M640 M643 $225 $150

Aquatic Microbiology - Bacteria Code 1 Week 2 Weeks

Bacterial abundance (DAPI, AO, SYTO, or Propidium iodide) M644 Call $150

Aquatic Microbiology - Zooplankton analyses Code 1 Week 2 Weeks

Zooplankton identification to major taxa M645 $160 $60

Zooplankton total count (Major taxa) M646 $150 $50

Zooplankton identification and enumeration (Major taxa) M647 $200 $100

Zooplankton identification and enumeration (Genus) M648 Call $160

Zooplankton identification and enumeration (Species) M649 Call $190

Zebra Mussel Veligers count M650 Call $160

Permanent slide for zooplankton M651 $175 $125

Aquatic Microbiology - Invertebrates Code 1 Week 2 Weeks

Invertebrates, identification to major taxa, Includes insects(to order level), M652 $225 $125

nematodes (to phylum level), flatworms (to class level), annelids (to class level),

and mollusks (to family level)

Aquatic Microbiology - Aquatic environment Code 1 Week 2 Weeks

Microscopic Particulate Analysis (MPA) M653 Call $375

TurnAround Times are Determined by Laboratory Testing Schedule. Additional Services: Method Development and Validation; Product Development; Shelf Life and Stability Testing.


24

P C R a n d D N A L A B S E R V I C E S

PCR - WATER DAMAGE PANELS• Environmental Relative Moldiness Index (ERMI)• American Relative Moldiness Index (ARMI)• Water Damage 10 Panel • Water Damage 15 Panel• Water Damage 20 Panel• Aspergillus/Penicillium Screen

PCR - ASPERGILLUS PANELS• Aspergillus Comprehensive 15 Panel• Aspergillus Common 10 Panel• Aspergillus Nosocomial 6 Panel

PCR - PENICILLIUM PANELS• Penicillium Comprehensive 13 Panel • Penicillium Comprehensive Mycotoxin 9 Panel

PCR - FECAL CONTAMINATION INDICATORS• E. coli• Total Enterococcus• Total Bacteroides• Human Bacteroides

PCR - LEGIONELLA TESTING• Broad Screen for 50 Legionella spp.

and Legionella pneumophila• Legionella pneumophila• Legionella micdadei• Legionella sainthelensi/cincinnatiensis• Legionella maceachernii

PCR - TOTAL or HUMAN BACTEROIDES

PCR - PATHOGEN DETECTION PACKAGES• MRSA - Methicillin-Resistant Staphylococcus aureus• Mycobacterium tuberculosis• E. coli O157:H7 • Salmonella• Enteroviruses

Quantitative Polymerase Chain Reaction (qPCR) is cutting edge molecular technolo-gy that analyzes for the genetic material called deoxyribonucleic acid (DNA) that is

found in every cell. DNA is unique for every individual organism. Using qPCR allows for the detection of fungi, bacteria and certain viruses by identifying thepresence of their specific DNA in their genome. qPCR analysis of fungi and certain bacteria is performed at EMSL AnalyticalInc. under a Patent License Agreement with the EPA National Exposure andResearch Laboratory. EMSL is currently developing several methods usingqPCR for the detection of pathogenic bacteria and viruses that are of interest to

the indoor air quality, food, consumer products, and pharmaceutical industries.qPCR can detect the presence of small quantities of organisms whether they are

alive, dead or cannot be cultured. For these reasons, qPCR is a fast, accurate, sensitiveand specific alternative analysis that has many advantages over traditional microbiological

methods that involve microscopic direct examination or culturing. Key tests include (but not limited to) the following:


PCR - Water Damage PanelsPCR - Environmental Relative Moldiness Index (ERMI) 36 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysThis package was developed by the EPA and is being studied as a tool to help qualify the moldiness of homes.

Group I (Water Damage Indicators): Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger, Aspergillus ochraceus, M180 $720 $540 $360 $250 $195Aspergillus penicillioides, Aspergillus restrictus, Aspergillus sclerotiorum, Aspergillus sydowii, Aspergillus unguis, Aspergillus versicolor, Aureobasidium pullulans, Chaetomium globosum, Cladosporium sphaerospermum, Eurotium (A) amstelodami, Paecilomyces variotii, Penicillium brevicompactum, Penicillium corylophilum, Penicillium crustosum, Penicillium purpurogenum, Penicillium spinulosum, Penicillium variabile, Scopulariopsis brevicaulis, Scopulariopsis chartarum, Stachybotrys chartarum, Trichoderma viride, Wallemia sebiGroup II (Ubiquitous Fungi): Acremonium strictum, Alternaria alternata, Aspergillus ustus, Cladosporium cladosporioides v1, Cladosporium cladosporioides v2, Cladosporium herbarum, Epicoccum nigrum, Mucor & Rhizopus group, Penicillium chrysogenum, Rhizopus stolonifer

PCR - American Relative Moldiness Index (ARMI) Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysThis package was developed by the EPA to correlate with the ERMI above using fewer fungi.

Group I: Aspergillus niger, Aspergillus ochraceus, Aspergillus penicillioides, Aspergillus restrictus, Aspergillus sydowii, M179 $450 $360 $195 $150 $100Eurotium (A) amstelodami, Chaetomium globosum, Paecilomyces variotii, Penicillium chrysogenum, Wallemia sebi. Group II: Alternaria alternata, Cladosporium cladosporioides v1, Cladosporium herbarum

PCR - EPA 36 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysThis package includes the same fungi as in the ERMI but no ERMI index is included. M233 $720 $540 $475 $250 $195Use this package for non-dust samples or when the index is not needed.

PCR - Water Damage 20 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysThis package is a subset of the EPA’s ERMI Group I fungi that are commonly associated with water damaged environments.Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger, Aspergillus ochraceus, Aspergillus penicillioides, M181 $590 $445 $295 $200 $150Aspergillus sclerotiorum, Aspergillus sydowii, Aspergillus unguis, Aspergillus versicolor, Aureobasidium pullulans, Chaetomium globosum, Cladosporium sphaerosperum, Eurotium (A) amstelodami, Paecilomyces variotii, Pencillium brevicompactum, Penicillium corylophilum, Penicillium crustosum, Penicillium spinulosum, Penicillium variabile, Stachybotrys chartarum

PCR - Water Damage 15 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysThe following package is a subset of the EPA’s ERMI Group I fungi that are commonly associated with water damaged environments.

Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger, Aspergillus sydowii, Aspergillus versicolor, Aureobasidium pullulans, M182 $490 $386 $245 $175 $120Aureobasidium pullulans, Chaetomium globosum, Cladosporium sphaerospermum, Eurotium (A) amstelodami, Paecilomyces variotii, Penicillium brevicompactum, Penicillium corylophilum, Penicillium spinulosum, Penicillium variabile, Stachybotrys chartarum

PCR - Water Damage 10 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysThe following 10 organisms form a screen for fungi that are commonly associated with water damaged environments.

Aspergillus/Penicillium Group, Aspergillus fumigatus, Aspergillus versicolor, Aureobasidium pullulans, Chaetomium globosum, M184 $350 $300 $155 $125 $100Cladosporium sphaerospermum, Paecilomyces variotii, Stachybotrys chartarum, Scopulariopsis brevicaulis, Trichoderma viride

Create Your Own Fungal Panel (Price per species) Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysInquire for up-to-date list of species available in which to create your own fungal panel. More species will continue to be added over time M100 Call Call Call Call Callamd with client interest. Any number of individual available fungal species can be substituted in the above Water Damage Panels (at no cost)or added to the panel for an extra cost per species.

PCR - Wood Rot Fungi 10 Panel Code 1 Week 2 WeeksThe following 10 fungi are common wood rot fungi detected by Nested-PCR & confirmed by DNA Barcode Sequencing.

Serpula lacrymans, Serpula himantioides, Meruliporia incrassata, Coniophora puteana, Antrodia vaillantii, Antrodia serialis, M232 $1,500 $1,250Postia placenta, Tapinella panuoides, Gloeophyllum trabeum, Donkioporia expansa

PCR - Aspergillus PanelsPCR - Aspergillus Comprehensive 15 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysComprehensive package of all available Aspergillus species.

Eurotium (A.) amstelodami, Aspergillus flavus, Aspergillus fumigatus, Emericella (A.) nidulans, Aspergillus M186 $500 $375 $250 $180 $125niger, Aspergillus ochraceus, Aspergillus parasiticus, Aspergillus penicillioides, Aspergillus restrictus, Aspergillus sclerotiorum, Aspergillus sydowii, Aspergillus terreus, Aspergillus unguis, Aspergillus ustus, Aspergillus versicolor

PCR - Aspergillus Common 10 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysPackage of the most commonly encountered Aspergillus species.

Eurotium (A.) amstelodami, Aspergillus flavus, Aspergillus fumigatus, Emericella (A.) nidulans, Aspergillus M187 $400 $300 $155 $125 $100niger, Aspergillus ochraceus, Aspergillus parasiticus, Aspergillus sydowii, Aspergillus ustus, Aspergillus versicolor

PCR - Aspergillus Nosocomial 6 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysPackage of the most common species responsible for aspergillosis and nosocomial Aspergillus infections.

Aspergillus flavus, Aspergillus fumigatus, Emericella (A.) nidulans, Aspergillus niger, Aspergillus terreus, Aspergillus versicolor M188 $280 $210 $140 $115 $90

PCR - Penicillium PanelsPCR - Penicillium Comprehensive 13 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysComprehensive package of commonly found Penicillium species in indoor environments.

Penicillium aurantiogriseum, Penicillium brevicompactum, Penicillium chrysogenum, Penicillium citrinum, Penicillium corylophilum, M189 $400 $300 $200 $155 $105Penicillium crustosum, Penicillium expansum, Penicillium fellutanum, Penicillium purpurogenum, Penicillium roquefortii, Penicillium simplicissimum, Penicillium spinulosum, Penicillium variabile

PCR - Penicillium Comprehensive Mycotoxin 9 Panel Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysComprehensive package of all available mycotoxin producing Penicillium species.

Penicillium aurantiogriseum, Penicillium brevicompactum, Penicillium chrysogenum, Penicillium citrinum, Penicillium crustosum, M190 $350 $280 $150 $120 $95Penicillium expansum, Penicillium roquefortii, Penicillium simplicissimum, Penicillium variabile** Same Day Turn-Around-Times (anything less than 24hrs) are subject to restrictions including but not limited to Lab operational hours.

25

PCR and DNA Laboratory Services


PCR and DNA Laboratory Services

PCR/DNA - Rapid Pathogen DetectionBacteria Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysAnaplasma phagocytophilum – Anaplasmosis M261 $500 $400 $250 $180 $150

Borrelia burgdorferi lyme disease qPCR M196 $500 $400 $250 $180 $150Chlamydophila psittaci avian zoonosis M234 $500 $400 $250 $180 $150

Clostridium botulinum PCR M206 $500 $400 $250 $180 $150Clostridium chauvoei, blackleg disease nested PCR M198 $500 $400 $250 $180 $150

E. coli 0157:H7 qPCR M140 $500 $400 $250 $180 $150Helicobacter pylori qPCR M207 $500 $400 $250 $180 $150

MRSA - Methicillin-Resistant Staphylococcus aureus, qPCR M203 $500 $400 $250 $180 $150Mycobacterium avium qPCR M144 $500 $400 $250 $180 $150

Mycobacterium tuberculosis by real-time PCR M159 $500 $400 $250 $180 $150Salmonella spp., qPCR M141 $500 $400 $250 $180 $150

Shigella spp., qPCR F122 $500 $400 $250 $180 $150

Fungi Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 Days

Histoplasma capsulatum NIOSH Nested PCR M208 $500 $400 $250 $180 $150

Cryptococcus neoformans qPCR M143 $500 $400 $250 $180 $150

Virus Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 Days

Enteric Viruses M142 N/A N/A $500 $420 $350

Norovirus (Norwalk) M204 N/A N/A N/A N/A $350Human Polyomavirus JC virus, BK virus M216 N/A N/A N/A N/A $350

Protozoan and Parasites Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysAcanthamoeba spp., qPCR M147 $500 $400 $250 $180 $150

Babesia microti – Babesiosis M260 $500 $400 $250 $180 $150Baylisascaris procyonis, raccoon roundworms M236 $500 $400 $250 $180 $150

Giardia spp., qPCR M149 $500 $400 $250 $180 $150Naegleria fowleri, nested PCR M197 $500 $400 $250 $180 $150

Insect Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 Days

Bed bug (Cimex lectularius), qPCR M146 $500 $400 $250 $180 $150

PCR - DNA Sequencing Code 6-10 DaysIdentify fungal or bacterial isolates by PCR & DNA Sequencing (Price is per isolate) M192 $185

PCR/DNA - AuthenticationFood DNA Authentication Code 3 Days 4 Days 1 WeekBlack Truffle Oil, Oat, Rice, Fruit, Fish, Meat, etc., PCR and DNA Sequencing F130 Call $500 $250

Forensic and Legal Sample Authentication Code 3 Days 4 Days 1 Week 2 WeeksHuman Originated Biological Materials DNA Analysis (human mtDNA, human STR etc.) M299 N/A N/A Call Call

Plant DNA Authentication Code 3 Days 4 Days 1 WeekCannabis sativa (marijuana), PCR and DNA Sequencing M193 N/A $500 $250

Tree, Wood DNA identification, PCR and DNA Sequencing M194 N/A $800 $500

Animal/Insect Source Tracking DNA Authentication Code 3 Days 4 Days 1 WeekMitochondrial DNA Detection, PCR and DNA Sequencing M195 Call $500 $250

PCR - Legionella PanelsPCR - Legionella - If viability is needed, see culturable tests page 21, separate sample required Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysLegionella pneumophila, Legionella micdadei, Legionella sainthelensi/cincinnatiensis, Legionella maceachernii M162 $450 $350 $185 $155 $125

Broad Screen for 50 Legionella spp. and rapid detection of Legionella pneumophila by real-time PCR M163 $450 $350 $165 $135 $105L. pneumophila M103 $450 $350 $125 $105 $85

L. micdadei M102 $450 $350 $125 $105 $85

L. sainthelensi/cincinnatiensis M104 $450 $350 $125 $105 $85

L. maceachernii M101 $450 $350 $125 $105 $85

PCR - Fecal Contamination Indicators Code 3 Hrs** 6 Hrs** 1 Day 2 Days 3 DaysE. coli (100 mL sample required) M200 $300 $250 $115 $85 $65

Total Enterococcus (100 mL sample required) M096 $300 $250 $115 $85 $65

Bacteroides spp. (100 mL sample required) M095 $300 $250 $115 $85 $65

Human Bacteroides spp., qPCR (100 mL sample required) M199 $300 $250 $115 $85 $65


27

I N D U S T R I A L H Y G I E N E S E R V I C E S

EMSL Analytical Inc. provides Industrial Hygiene Laboratory Services for air samples employing anextensive list of NIOSH, OSHA, and EPA test methods. Our IH Lab services are provided atour Corporate Lab in New Jersey, as well as at our Indianapolis, Indiana and Garden Grove,California Lab (LA Testing). The IH Lab Division includes qualified and experienced professionals including Certified Industrial Hygienists (CIH’s) that welcome any/all clientinteraction with the lab before, during, as well as after the sampling event. This includessupport with sampling strategies (CIH’s on Staff at our NJ Location) so that we may assistin ensuring that the lab data that we provide will achieve the goal that the customer intendson achieving with the sampling. We also typically provide sampling equipment and themedia for the sampling event at no additional charge as long as the analysis is performed byEMSL Analytical, Inc. The IH Laboratories maintain AIHA accreditation for IndustrialHygiene which includes on-site lab audits, formal document review program, along with staffexperience and education criteria, and Proficiency Testing Program as part of the Accreditationprocess. Additionally, as required, the Labs maintain any applicable state certifications for fields of testing for air samples. Air samples are analyzed for most analytes using GC-ECD, GC-FID, GC-NPD, HPLC, LC/MS and/or GC-MS. The analysis and reporting of the individual sample is part of an overall process that includes analysis of Quality Control samples and programs such as Instrument QC controls, calibration standard checks, spiked media, and reporting limit controls to ensure the confidence limits of thedata are within the acceptable range as specified by the method requirements and our Quality Control Program. Our IH Laboratories maintain normal business day operational hours with weekend scheduling availability as needed for criticalresponse situations. Samples are received during regular business hours and Turn-Around-Times are tracked on business days. LabTATs are offered for same day or next day, as well as for 2 day, 3 day, 4 day, 1 week, and 2 week Standard TATs. Costs/rates are basedon the TAT requested with our 2 week TAT rates being the most economically cost effective for our customers.Sample control/processing (log-in, results data-entry, reporting) is facilitated by our computer Laboratory Information Management System (LIMS) which tracks the sample job (batch) and provides the lab with work log (due dates) to help ensure all the work is organ-ized and processed in accordance with the clients needs. Additionally, the LIMS includes security controls to ensure that information is controlled (locked) once the data is been documented and entered by the bench chemists. Reports are delivered at the choice of the customer which would include email, hard-copy regular mail, or both. Additionally, EMSL can provide Electronic Data Deliverables(EDD), as well as various QC Data Packages if required. Key tests include (but not limited to) the following:

ORGANIC• VOC by NIOSH 1501/1550• Aldehydes by modified NIOSH 2016• Aromatic Hydrocarbons by NIOSH 1501• Asphalt Fumes by OSHA 58• BTEX Profile by NIOSH 1501• Diisocynates OSHA 42/47M• Organic Solvent Profiles – Multiple NIOSH Methods

including NIOSH 1501 and 1003• Coal Tar Pitch Volatiles – NIOSH 5042• Glycols using NIOSH 5523 (ethylene & propylene)

ACID FUMES• Individual Acids by NIOSH 7903• Group Scan by NIOSH 7903

PESTICIDES• Organophosphorous/nitrogen pesticides using

modified NIOSH 5600• Chlorinated pesticides, mostly banned by the

EPA 20+ years ago by modified NIOSH 5510

METALS (ICP, ICP/MS, CVAA)• Individual Elements • Solder Metals Profile• Multi-Element Packages • Welding Fume Profile

HEXAVALENT CHROMIUM • OSHA ID-215 Vers. 2

NUISANCE & RESPIRABLE DUST • Nuisance Dust (NIOSH 0500)• Respirable Dust (NIOSH 0600)• Airborne Dust PM-10/PM 2.5

(40 CFR Part 50.6 Appendix J)• Airborne Dust TSP (40 CFR Part 50.6 Appendix B)• Airborne Cement Dust (OSHA ID142/ID207)

SILICA• Crystalline Silica • Alpha Quartz • Cristobalite • Tridymite• Amorphous Silica

IH METHODS UTILIZED • NIOSH 1003• NIOSH 1005• NIOSH 1007• NIOSH 1024• NIOSH 1300• NIOSH 1301• NIOSH 1400• NIOSH 1401• NIOSH 1402• NIOSH 1403• NIOSH 1450• NIOSH 1453• NIOSH 1457• NIOSH 1500• NIOSH 1501• NIOSH 1550• NIOSH 1551• NIOSH 1552• NIOSH 1603• NIOSH 1604• NIOSH 1606• NIOSH 1615

• NIOSH 1616• NIOSH 2000• NIOSH 2016• NIOSH 2500• NIOSH 2546• NIOSH 2551 mod.• NIOSH 5040• NIOSH 5042• NIOSH 5503• NIOSH 5506• NIOSH 5510• NIOSH 5523• NIOSH 5600 mod.• NIOSH 6009• NIOSH 6010• NIOSH 7300• NIOSH 7401• NIOSH 7903• OSHA 07• OSHA 42/47 mod.• OSHA 58• OSHA ID125

28

Indust

rial

Hyg

iene P

roducts

Gilian GilAir5RProduct Number: 8706209


GilAir Constant Flow Module1-500 cc for GilAir-3 and

GilAir-5 PumpsProduct Number: 8706902


37 mm 5 µm PVC CassetteIndividual Product Number: 8715100

List Price: $2.00 USD50 Pack Product Number: 8715100B


Gravimetric Pre-Weighed Cassettes37 mm 5 μm PVC Cassette - 50 Pack


Zefon Aluminum Cyclone w/HolderProduct Number: 8715802


ppbRAE 3000Product Number: 8703801List Price: $7,030.00 USD

Gilian Gilibrator II

Medium flow, 20 mL/min - 6 L/minProduct Number: 8704006 List Price: $1,479.00 USD

High flow, 2 - 30 mL/minProduct Number: 8704007 List Price: $1,475.00 USD

Low flow, 1 - 250 mL/minProduct Number: 8704008 List Price: $1,360.00 USD

Gilian Gilibrator II - All cells and printerProduct Number: 8704009 List Price: $3,500.00 USD

TE-6070V Volumetric Flow Controlled (VFC)PM-10 Monitor in Ambient Air

Product Number: 8703618Complete Monitor List Price: $5,900.00 USD

Passive Dosimeters

3M 3500 Diff Sampler BadgeSingle Charcoal Element Product Number: 87IH069

List Price: $20.00

3M 3520 Diff Sampler BadgeDual Charcoal Element

Product Number: 87IH070 List Price: $20.00

Formaldehyde Diffusive SamplerAssay tech

Product Number: 87IH034List Price: $20.00

3M 3721 Diff Sampler BadgeProduct Number: 87IH077

List Price: $30.00

Mercury Badge Holder 520-03Product Number: 87IH084

List Price: $30.00

BUCK Libra Plus Product Number: 8706203


BUCK Libra Plus Kit w/Case5 Pumps with 5 Single Chargers

Product Number: 8706201List Price: $3,250.00 USD


for a FREE copy!


Industrial Hygiene Laboratory Services

ANALYTE Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksAcetic acid NIOSH 1603 Call $182 $152 $121 $91 $76 $61

Acetone NIOSH 1300 Call $138 $116 $92 $63 $58 $46

Acetaldehyde NIOSH 2016M Call $218 $182 $145 $109 $91 $73

Acetonitrile NIOSH 1606 Call $138 $116 $92 $63 $58 $46

Acrolein NIOSH 2016M Call $218 $182 $145 $109 $91 $73

Acrylonitrile NIOSH 1604 Call $145 $121 $97 $73 $61 $48

Alkaline Dust (3 sample minimum) NIOSH 7401 Call $413 $344 $275 $207 $172 $138

Ammonia OSHA ID188 / NIOSH 6016 Call $273 $228 $182 $136 $114 $91

Asphalt Fumes (Particulate/Benzene Sol. Fraction) NIOSH 5042 Call $413 $344 $275 $207 $172 $138

Asphalt Fumes (Benzene Sol. Fraction only, does not include PAH) OSHA 58 Call $413 $344 $275 $207 $172 $138

Benzaldehyde NIOSH 2016M Call $218 $182 $145 $109 $91 $73

Benzene NIOSH 1500/1501 Call $138 $116 $92 $63 $58 $46

Benzyl chloride (alpha-chlorotoluene) NIOSH 1003 Call $138 $116 $92 $63 $58 $46

Bisphenol A OSHA CSI Call Call Call $484 $363 $303 $242

Boric Acid (as Boron) OSHA CSI Call $182 $152 $121 $91 $76 $61

Bromine (media blank required @ $40 additional cost) NIOSH 6011 Call $273 $228 $182 $136 $114 $91

1-Bromopropane (propyl bromide) OSHA PV2061 Call $182 $152 $121 $91 $76 $61

1,3-Butadiene NIOSH 1024 Call Call Call $121 $91 $76 $61

2-Butoxyethanol NIOSH 1403 Call $182 $152 $121 $91 $76 $61

tert-ButyI acetate NIOSH 1400 Call $138 $116 $92 $63 $58 $46

sec-Butyl acetate NIOSH 1450 Call $138 $116 $92 $63 $58 $46

n-Butyl acetate NIOSH 1450 Call $138 $116 $92 $63 $58 $46

n-Butyl alcohol (n-butanol) NIOSH 1401 Call $138 $116 $92 $63 $58 $46

sec-Butyl alcohol (sec-butanol) NIOSH 1401 Call $138 $116 $92 $63 $58 $46

tert-Butyl alcohol (tert-butanol) NIOSH 1400 Call $138 $116 $92 $63 $58 $46

Butyl glycidyl ether NIOSH 1616 Call $182 $152 $121 $91 $76 $61

Butyraldehyde NIOSH 2016M Call $218 $182 $145 $109 $91 $73

Capsaicin (pepper spray, include Dihyctro) OSHA CSI Call $726 $605 $484 $363 $303 $242

Carbon tetrachloride NIOSH 1003 Call $138 $116 $92 $63 $58 $46

Chlordane NIOSH 5510 Call $237 $196 $157 $118 $99 $79

Chlorine (media blank required @ $40 additional cost) NIOSH 6011 Call $273 $228 $182 $136 $114 $91

alpha-Chloroacetophenone (tear gas) CSI Method Call $726 $605 $484 $363 $303 $242

Chlorobenzene NIOSH 1003 Call $138 $116 $92 $63 $58 $46

Chloroform (trichloromethane) NIOSH 1003 Call $138 $116 $92 $63 $58 $46

Chlorpyrifos (Dursban) NIOSH 5600M Call $273 $228 $182 $136 $114 $91

Chromium, Hexavalent (add $25 prep for paint operations) OSHA ID215 Call $237 $169 $145 $103 $92 $79

Cresols (m, o, p-isomers) NIOSH 2546 Call $413 $344 $275 $207 $172 $138

Cumene (isopropylbenzene) NIOSH 1501 Call $138 $116 $92 $63 $58 $46

Hydrogen Cyanide NIOSH 6010 Call $237 $169 $145 $103 $92 $79

Cyclohexane NIOSH 1500 Call $138 $116 $92 $63 $53 $46

Cyclohexanone NIOSH 1300 Call $182 $152 $121 $91 $76 $61

Cyclopentane NIOSH 1500 Call $138 $116 $92 $63 $58 $46

Diacetone alcohol OSHA CSI Call $182 $152 $121 $91 $76 $61

Diazinon NIOSH 5600M Call $273 $228 $182 $136 $114 $91

1,2-Dichloroethylene (cis) NIOSH 1003 Call $138 $116 $92 $63 $58 $46

1,2-Dichloroethylene (trans) NIOSH 1003 Call $138 $116 $92 $63 $58 $46

p-Dichlorobenzene (1,4 isomer) NIOSH 1003 Call $138 $116 $92 $63 $58 $46

m-Dichlorobenzene (1,3 isomer) NIOSH 1003 Call $138 $116 $92 $63 $58 $46

o-Dichlorobenzene (1,2 isomer) NIOSH 1003 Call $138 $116 $92 $63 $58 $46

Dichlorvos NIOSH 5600M Call $273 $228 $182 $136 $114 $91

1,2-Dichloroethane (ethylidene chloride) NIOSH 1003 Call $138 $116 $92 $63 $58 $46

Diesel Particulate Matter (DPM or elemental carbon) NIOSH 5040 Call $413 $344 $275 $207 $172 $138Turn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day. Same day TATs are available on some tests, please call.

Expedited TATs (anything less than 1 Week) subject to capacity restrictions and not guaranteed to be available - call/pre-schedule with lab to ensure capability and availability for expedited TATs



ANALYTE Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks

Diethyl ether (ethyl ether) OSHA 07 Call $182 $152 $121 $91 $76 $61

Diethyl ketone NIOSH 1301 Call $138 $116 $92 $63 $58 $46

Diisobutyl ketone NIOSH 1300 Call $138 $116 $92 $63 $58 $46

DipropyI ketone (4-heptanone) NIOSH 1300 Call $138 $116 $92 $63 $58 $46

Dursban (chlorpyrifos) NIOSH 5600M Call $273 $228 $182 $136 $114 $91

Elemental Carbon (Diesel Particulate Matter or DPM) NIOSH 5040 Call $413 $344 $275 $207 $172 $138

Ethanol (ethyl alcohol) NIOSH 1400 Call $138 $116 $92 $63 $58 $46

Ethyl Acetate NIOSH 1457 Call $138 $116 $92 $63 $58 $46

Ethyl Benzene mod. NIOSH 1501 Call $138 $116 $92 $63 $58 $46

Ethyl butyl ketone NIOSH 1301 Call $138 $116 $92 $63 $58 $46

Ethylene glycol NIOSH 5523 Call $248 $207 $165 $124 $103 $83

Ethylene Oxide OSHA 1010 Call $375 $313 $250 $188 $145 $125

Ethyl ether NIOSH 1610 Call $182 $152 $121 $91 $76 $61

Formaldehyde NIOSH 2016/NIOSH 3500 Call $218 $182 $145 $109 $91 $73

Formaldehyde (diffusive sampler/badge extra) NIOSH 2016M Call $218 $182 $145 $109 $91 $73

Formaldehyde (dry-bulk) HPLC Call $908 $757 $605 $454 $378 $303

Formaldehyde (wet-bulk) CW ppm range/or highest HPLC Call Call Call $1,150 $757 $529 $424

Formaldehyde (bulk-High Temp Treatment) HPLC Call Call Call Call Call $1,212 $606

Glutaraldehyde NIOSH 2016M Call $218 $182 $145 $109 $91 $73

HDI (Hexamethylene diisocyanate) OSHA 42/47M Call $273 $228 $182 $136 $114 $91

Heptane NIOSH 1500 Call $138 $116 $92 $63 $58 $46

n-Hexane NIOSH 1500 Call $138 $116 $92 $63 $58 $46

Hydrobromic acid NIOSH 7903 Call $165 $144 $133 $85 $72 $48

Hydrochloric acid NIOSH 7903 Call $165 $144 $133 $85 $72 $48

Hydrofluoric acid NIOSH 7903 Call $165 $144 $133 $85 $72 $48

Hydrogen Sulfide OSHA 1008/NIOSH 6013 Call Call Call $219 $164 $136 $109

IsoamyI acetate NIOSH 1450 Call $138 $116 $92 $63 $58 $46

IsoamyI alcohol NIOSH 1402 Call $138 $116 $92 $63 $58 $46

Isobutyl alcohol (2-methyl-1-propanol) NIOSH 1401 Call $138 $116 $92 $63 $58 $46

Isocyanates (2,4-TDI, 2,6-TDI, MDI, HDI) OSHA 42/47M Call $726 $605 $484 $363 $303 $242

IsopropyI alcohol NIOSH 1400 Call $138 $116 $92 $63 $58 $46

Limonene NIOSH 1552 Call $138 $116 $92 $63 $58 $46

Malathion NIOSH 5600M Call $273 $228 $182 $136 $114 $91

MDI (Methylene bisphenyl diisocyanate) OSHA 42/47M Call $273 $228 $182 $136 $114 $91

Mercury (Hg) OSHA 140/NIOSH 6009 $150 $125 $90 $70 $60 $55 $50

Metals (see page 44 for multi-element discount packages) NIOSH 7300M $150 $78 $55 $44 $36 $33 $26

Methamphetamine (wipe and bulk) LC/MS to 0.1ug NIOSH 9111M Call Call Call Call Call $90 $75

Methanol NIOSH 2000 Call $138 $116 $92 $63 $58 $46

2-Methoxyethanol NIOSH 1403 Call $182 $152 $121 $91 $76 $61

Methyl cyclohexane NIOSH 1500 Call $138 $116 $92 $63 $58 $46

Methyl ethyl ketone (2-butanone or MEK) NIOSH 2500 Call $138 $116 $92 $63 $58 $46

Methylene chloride (2 tubes in tandem) NIOSH 1005 Call $248 $207 $165 $124 $103 $83

Methyl isoamyl acetate (Hexyl acetate) NIOSH 1450 Call $138 $116 $92 $63 $58 $46

Methyl isobutyl ketone (4-methyl-2-pentanone) NIOSH 1300 Call $138 $116 $92 $63 $58 $46

Methyl methacrylate OSHA CSI Call $248 $207 $165 $124 $103 $83

Methyl parathion mod. NIOSH 5600 Call $273 $228 $182 $136 $114 $91

Methyl propyl ketone (2-pentanone) NIOSH 1300 Call $138 $116 $92 $63 $58 $46

Methyl tert-butyl ether (MTBE) NIOSH 1615 Call $182 $152 $121 $91 $76 $61

Turn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day. Same day TATs are available on some tests, please call.




ANALYTE Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksNaphthalene NIOSH 1501 mod. Call $138 $116 $92 $63 $58 $46New Rug Odor (4-Phenylcyclohexene or 4-PC or 4-PCH) CSI Method Call $495 $413 $330 $248 $206 $165Nicotine NIOSH 2551 Call $330 $275 $220 $165 $138 $110Nicotine (Bulk or wipe) mod. NIOSH 2551 Call Call Call Call Call $344 $275Nitric acid NIOSH 7903 Call $165 $144 $133 $85 $72 $48Nitrogen Dioxide/Nitrogen Oxide (NOX) NIOSH 6014/OSHA ID 182 Call $327 $273 $218 $164 $136 $109n-Octane NIOSH 1500 Call $138 $116 $92 $63 $58 $46Ozone (Media may require 5 days) OSHA 214 Call $297 $256 $206 $154 $129 $103Paraffin wax fume OSHA CSI Call Call Call Call $413 $344 $275Parathion mod. NIOSH 5600 Call $273 $228 $182 $136 $114 $91PCBs Air Sample NIOSH 5503 Modified Call $220 $150 $110 $95 $85 $55PCBs Air Sample EPA TO-10A N/A Call Call $250 $220 $165 $140PCBs Air Sample EPA TO-4A N/A Call Call $454 $394 $315 $278Pentachlorophenol OSHA CSI Call $454 $378 $303 $228 $190 $152Pentane NIOSH 1500 Call $138 $116 $92 $63 $58 $46Perchloroethylene (tetrachloroethylene) NIOSH 1003 Call $138 $116 $92 $63 $58 $46Permethrins (cis and trans) mod. NIOSH 5008 Call $908 $757 $605 $454 $378 $303Pesticides, organochlorine mod. NIOSH 5510 Call $315 $250 $210 $175 $140 $105Pesticides, organophosphorus/organonitrogen mod. NIOSH 5600 Call Call Call Call $545 $454 $363Petroleum ether (as VM+P naphtha) NIOSH 1550 Call $182 $152 $121 $91 $76 $61Petroleum naphtha (as VM+P naphtha) NIOSH 1550 Call $182 $152 $121 $91 $76 $61Phenol NIOSH 2546 Call $182 $152 $121 $91 $76 $614-Phenylcyclohexene CSI Method Call $495 $413 $330 $248 $206 $165Phosphoric acid NIOSH 7903 Call $165 $144 $133 $85 $72 $48Potassium hydroxide (alkaline dust) (3 sample minimum) NIOSH 7401 Call $413 $344 $275 $207 $172 $138n-Propyl acetate NIOSH 1450 Call $138 $116 $92 $63 $58 $46n-Propyl alcohol NIOSH 1401 Call $138 $116 $92 $63 $58 $46Phthalate esters (per ester, add $75 each additional PP ester) OSHA CSI Call $545 $454 $363 $273 $227 $182Propionaldehyde mod. NIOSH 2016 Call $218 $182 $145 $109 $91 $73Propylene glycol NIOSH 5523 Call $248 $207 $165 $124 $103 $83Propylene glycol, monomethyl ether (PGME) OSHA CSI Call $545 $454 $363 $273 $227 $182Propylene glycol, monomethyl ether acetate (PGMEA) OSHA CSI Call $545 $454 $363 $273 $227 $182Pyrethrum mod. NIOSH 5008 Call $908 $757 $605 $454 $378 $303Sodium hydroxide (alkaline dust) (3 sample minimum) NIOSH 7401 Call $413 $344 $275 $207 $172 $138Stoddard Solvent (as VM+P naphtha) NIOSH 1550 Call $182 $152 $121 $91 $76 $61Styrene NIOSH 1501 Call $138 $116 $92 $63 $58 $46Sulfuric Acid NIOSH 7903 Call $165 $144 $133 $85 $72 $48Sulfur Dioxide NIOSH 6004 Call $273 $228 $182 $136 $114 $91Tear Gas (CN or CS, each separate cost) OSHA CSI Call $726 $605 $484 $363 $303 $2422,4-TDI (2,4-toluenediisocyanate) OSHA 42/47 (mod.) Call $273 $228 $182 $136 $114 $912,6-TDI (2,6-toluenediisocyanate) OSHA 42/47 (mod.) Call $273 $228 $182 $136 $114 $91Toluene NIOSH 1501 Call $138 $116 $92 $63 $58 $46Total Petroleum Hydrocarbons (as naphtha) NIOSH 1550 Call $182 $152 $121 $91 $76 $61Total Petroleum Hydrocarbons (as gasoline) NIOSH 1550 Call $182 $152 $121 $91 $76 $61Total Petroleum Hydrocarbons (as diesel/fuel oil#2) mod. NIOSH 1550 Call $248 $207 $165 $124 $103 $831,1,2-Trichloroethane NIOSH 1003 Call $138 $116 $92 $63 $58 $461,1,1-Trichloroethane NIOSH 1003 Call $138 $116 $92 $63 $58 $46Trichloroethylene NIOSH 1003 Call $138 $116 $92 $63 $58 $461,2,3-Trichloropropane NIOSH 1003 Call $138 $116 $92 $63 $58 $461,3,5-Trimethylbenzene NIOSH 1501 Call $138 $116 $92 $63 $58 $461,2,4-Trimethylbenzene NIOSH 1501 Call $138 $116 $92 $63 $58 $461,2,3-Trimethylbenzene NIOSH 1501 Call $138 $116 $92 $63 $58 $46Turpentine NIOSH 1551 Call $182 $152 $121 $91 $76 $61Vinyl acetate NIOSH 1453 Call $182 $152 $121 $91 $76 $61Vinyl chloride (2 tubes in tandem) NIOSH 1007 Call $248 $207 $165 $124 $103 $83VOC's (total as n-hexane) NIOSH 1500/1501 Call $248 $207 $165 $124 $103 $83VOC's Xylenes (o, m, p) NIOSH 1501 Call $138 $116 $92 $63 $58 $46Turn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day. Same day TATs are available on some tests, please call.



Industrial Hygiene Laboratory Services - Specialty Group Packages

IH Packages Analytes 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksAcid Profile - NIOSH 7903 $456 $380 $242 $182 $152 $140

Hydrobromic AcidHydrochloric AcidHydrofluoric AcidNitric AcidPhosphoric AcidSulfuric Acid

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksAldehyde Profile - NIOSH 2016M (Additional compounds available, call for info. and pricing) $578 $385 $308 $231 $212 $193

AcetaldehydeAcetoneAcroleinBenzaldehydeButyraldehydeCrotonaldehydeFormaldehyde

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksAromatic Hydrocarbon Profile - NIOSH 1501 Modified List $636 $530 $424 $318 $265 $212

Benzene Naphthalene Cumene o-Xylene Ethyl Benzene Styrenem,p-Xylene Toluene

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksBTEX Profile - NIOSH 1501 $413 $344 $275 $207 $172 $138

BenzeneEthyl Benzenem,p-Xyleneo-XyleneToluene

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksDiisocyanate Profile - OSHA 42/47M $726 $605 $484 $363 $303 $242

Hexamethylene Diisocyanate (HDI)Methylene Bisphenyl-Isocyanate (MDI)Toluene-2,4- Diisocyanate (2,4-TDI)Toluene-2,6- Diisocyanate (2,6-TDI)

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksOrganic Scan Profile - Multiple NIOSH methods (Additional compounds available, call for info. and pricing) Call Call Call $318 $265 $212

Benzene Tetrachloroethylene 2-HexanoneCarbon tetrachloride Toluene 2-HeptanoneChlorobenzene 1-Butanol 1,1,2,2-TetrachloroethaneChloroform 2-Butanol m-XyleneEthyl acetate 1,2-Dichloroethane o-XyleneEthylbenzene 1,2-Dichloropropane p-XyleneNaphthalene 1,2-Dichlorobenzene

Turn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day. Same day TATs are available on some tests, please call.



Industrial Hygiene Laboratory Services - Specialty Group Packages

IH Packages Analytes 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksPAHs - Coal Tar Pitch Volatiles - OSHA 58 Call Call $484 $363 $303 $242

AnthraceneBenzo(a)pyreneChrysenePhenanthrenePyrene

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksPAHs - NIOSH 5506 Call Call $581 $436 $363 $290

Acenaphthene Benzo(a)pyrene PhenanthreneAcenaphthylene Chrysene PyreneAnthracene Dibenz(a,h)anthracene Benzo (e) PyreneBenz(a)anthracene FluorantheneBenzo(b)fluoranthene FluoreneBenzo(k)fluoranthene Indeno(1,2,3cd)pyreneBenzo(ghi)perylene Napthalene

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksPesticide Chlorinated Profile - NIOSH 5510M $315 $250 $210 $175 $140 $105

Aldrin Endosulfan II Heptachloralpha-BHC Endosulfan Sulfate Heptachlor Epoxidealpha-Chlordane Endrin Methoxychlorbeta-BHC Endrin aldehyde Toxaphenedelta-BHC Endrin ketone 4,4-DDD Dieldrin gamma-BHC (Lindane) 4,4-DDE Endosulfan I gamma-Chlordane 4,4-DDT

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksPesticides Organophosphorus - NIOSH 5600/5601 modified list Call Call Call $545 $454 $363

Acetochlor Chlorpyrifos MethiocarbAldicarb Cyanazine MethomylAtrazine Diazinon OxamylBendiocarb Dichlorvos Parathion ethylBolstar Dimethoate Parathion methylCarbaryl Disulfoton SimazineCarbofuran Malathion Terbufos

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksSolder Operations Profile - NIOSH 7300M $150 $135 $120 $90 $62 $50

Antimony (Sb) Lead (Pb)Beryllium (Be) Silver (Ag)Cadmium (Cd) Tin (Sn)Copper (Cu) Zinc (Zn)Cobalt (Co)

1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksWelding Fumes Metals Profile - NIOSH 7300M $216 $185 $165 $129 $86 $72

Aluminum (Al) Iron (Fe)Antimony (Sb) Lead (Pb)Beryllium (Be) Manganese (Mn)Cadmium (Cd) Molybdenum (Mo)Chromium (Cr) Nickel (Ni)Copper (Cu) Titanium (Ti)Cobalt (Co) Vanadium (V)

Zinc (Zn)Turn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day. Same day TATs are available on some tests, please call.


34

ORGANIC COMPOUNDS • Volatile Organic Compounds by TO-15 • VOC by NIOSH 1501/1550• MVOC by GC-FID• MVOC by TO-15

LEEDs TESTING PACKAGE• TVOC (EPA TO-15 + Library Search +

TVOC Calculation)• Carbon Monoxide• New Rug Odor 4-Phenylcyclohexane (4-PCH)• Formaldehyde (NIOSH 2016)• PM10 (EPA Method IP-10A)

DUST PARTICLE IDENTIFICATION• Common Particle Identification (CPID)• Full Particle Identification (FPID)

AIRBORNE IRRITANTS, FUMES, ODORS,GASES, and/or CONTAMINANTS• Acid Scan by IC• Capsaicin (pepper spray)• Chlorpyrifos (dursban)• Formaldehyde• New Rug Odor 4-Phenylcyclohexane (4-PCH)• Nicotine• Radon• Tear Gas (CN or CS Police grade)

COMBUSTION BY-PRODUCTS• Carbon Black (NIOSH 5000)• Source Confirmation • Diesel Particulate Matter (DPM)

MMVF's (Fibrous glass, etc.)• PLM and SEM methodologies

RADON• Real Estate Transaction Kit • Home Owners Kit

FIXED GASES • Methane using EPA TO-3• Ammonia• Carbon Dioxide• Carbon Monoxide• Chlorine• Ethylene Oxide• Hydrogen Sulfide• Mercaptan• Oxygen• Phosgene• Phosphine• Sulfur Dioxide• Sulfur Gas Panel• Petroleum hydrocarbons• Water Vapor• Nitrous fumes (NO, NO2, NOx)• Hydrocarbon Analysis (C1-C6 paraffins)

using EPA TO-3

ALLERGENS• Latex • Cat• Dog• Cockroach• Dust Mites• Mouse and/or Rat Allergens• Fungal

PCR• ERMI• ARMI• Bacteroides• Legionella• Water Damage Panels

I A Q T E S T I N G S E R V I C E S

The IAQ Lab Testing Services is an industry reference of key tests that are done as part of characterization of the air quality of an indoor air environment.

The recent program associated with Leadership in Energy and EnvironmentalDesign (LEEDs) is an example of such IAQ programs that it typicallyincludes a group of tests with benchmark results criteria, used to characterizethe quality of the indoor air for a building or space. EMSL has been offeringvarious tests from various lab divisions characterized as IAQ Lab Services in

the same manner as the LEEDs program. The EMSL tests offered under thisIAQ Lab Testing services are performed by our Materials Science Laboratory

(Unknown Dust Particle ID, MMVF, Carbon Black), IH Lab Division (new Rug-Odor, Pepper Spray, Formaldehyde), TO-15 Division (SUMMA canister collection

via TO-15 for VOC's, odor investigations and bulk material off-gassing), Radiochemistry Division (Radon),Environmental Chemistry Division (Acid Fumes, VOC’s, Pesticides), and the Microbiology Division (PCR,Allergens, Mold). We have been able to share the resources, scientific knowledge between divisions, and expertiseand ability within their specific field of testing to provide the analytical experience and capabilities to assist ourcustomers (building science professionals and/or Indoor Air Quality Professionals) to measure, evaluate, andmonitor the Indoor Air Quality of a building or space. Key tests include (but not limited to) the following:


Industrial Hygiene/IAQ Laboratory Services

Volatile Organic Compounds (VOC’s) Method 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksVolatile Organic Scan by GC/MS (74 Compounds) via USEPA TO-15 TO-15 $636 $530 $424 $318 $265 $212Volatile Organic Scan by GC/MS w/Library Search via USEPA TO-15 TO-15 $726 $605 $484 $363 $303 $242Volatile Organic Scan by GC/MS via USEPA TO-15 with Full Deliverable Package TO-15 $855 $712 $570 $427 $356 $285Volatile Organic Scan by GC/MS w/Library Search via USEPA TO-15 and Full Deliverable Package TO-15 $990 $825 $660 $495 $413 $330Volatile Organic Scan by GC/MS via NJDEP Low Level TO-15 LLTO-15 $825 $688 $550 $413 $344 $275Volatile Organic Scan by GC/MS w/Library Search via NJDEP Low Level TO-15 LLTO-15 $975 $813 $650 $488 $406 $325Volatile Organic Scan by GC/MS via NJDEP Low Level TO-15 and Full Deliverable Package LLTO-15 $1,035 $862 $690 $517 $431 $345Volatile Organic Scan by GC/MS w/Library Search via NJDEP Low Level TO-15 and Full Deliverable Package LLTO-15 $1,185 $987 $790 $592 $494 $395Volatile Organic Scan by GC/MS via USEPA TO-17 TO-17 $825 $688 $550 $413 $344 $275Volatile Organic Scan by GC/MS w/Library Search via USEPA TO-17 TO-17 $975 $813 $650 $488 $406 $325Prices include equipment rental. A $100 per canister re-prep and certification fee for unused equipment will apply.Full Deliverables Package Price includes reduced and extended pdf reports, and EDDs. Full deliverables follow two weeks after results turnaround. Paper reports cost an additional $50 per project.Library Search includes up to 20 tentatively identified compounds (TICs). For the NJDEP LLTO-15, up to 30 non- alkane and alkene TICs. For "Soil Gas" samples - Reporting Limit will be 5.0 ppb for regular TO-15 and 2.0 ppb for NJ DEP Low Level tests.

Microbial Volatile Organic Compounds (MVOC's) 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksMVOC Screen by GC-FID (High Boiling Point)* N/A N/A N/A N/A Call $264MVOC Screen by TO-15 (Low Boiling Point)* $726 $605 $484 $363 $303 $242* Analysis dependent on mold species

FIXED GASES (multi-analyte same sample discounts are available) Method 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksMethane TO-3 $345 $288 $230 $172 $132 $115 Hydrocarbon Analysis (C1-C6 paraffins) TO-3 $420 $350 $280 $210 $161 $140 Sulfur Gas Panel ASTM D5504 $420 $350 $280 $210 $161 $140Ammonia CMS method $285 $238 $190 $142 $110 $95Carbon Dioxide CMS method $285 $238 $190 $142 $110 $95Carbon Monoxide CMS method $285 $238 $190 $142 $110 $95Chlorine CMS method $285 $238 $190 $142 $110 $95Ethylene Oxide CMS method $285 $238 $190 $142 $110 $95Hydrogen Sulfide CMS method $285 $238 $190 $142 $110 $95Hydrogen Sulfide* ASTM D5504 $345 $288 $230 $172 $132 $115 Mercaptan CMS method $285 $238 $190 $142 $110 $95Nitrogen Dioxide CMS method $285 $238 $190 $142 $110 $95Nitrous fumes (NO, NO2, NOx) DOES NOT COVER NITROUS OXIDE CMS method $285 $238 $190 $142 $110 $95 Oxygen CMS method $285 $238 $190 $142 $110 $95Petroleum hydrocarbons CMS method $285 $238 $190 $142 $110 $95Phosgene CMS method $285 $238 $190 $142 $110 $95 Phosphine CMS method $285 $238 $190 $142 $110 $95 Sulfur Dioxide CMS method $285 $238 $190 $142 $110 $95Water Vapor CMS method $285 $238 $190 $142 $110 $95* 4 ppb reporting limit by ASTM D5504

SILICA TYPE METHOD 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksCrystalline silica, single species (Alpha Quartz,Cristobalite or Tridymite) Air NIOSH 7500mod $183 $121 $103 $91 $79 $61Crystalline silica, all species (Alpha Quartz,Cristobalite and Tridymite) Air NIOSH 7500mod $492 $321 $273 $242 $212 $164Amorphous Silica Air NIOSH 7501mod N/A N/A $545 $484 $424 $327Crystalline silica, single species (Alpha Quartz,Cristobalite or Tridymite) Bulk NIOSH 7500mod/OSHA ID-142 $291 $242 $194 $155 $122 $97Crystalline silica, all species (Alpha Quartz,Cristobalite and Tridymite) Bulk NIOSH 7500mod/OSHA ID-142 $726 $605 $484 $387 $303 $242Crystalline silica, all species (Phosphoric Acid Digestion) Bulk Phosphoric Acid Digestion N/A N/A $545 $436 $339 $273Amorphous Silica Bulk NIOSH 7501mod N/A N/A $968 $774 $605 $484Airborne cement dust Air OSHA ID-142/ID207 N/A $825 $660 $540 $450 $300

NUISANCE & RESPIRABLE DUST TYPE 3 Hrs** 6 Hrs** 24 Hrs 2 Days 3 Days 4 Days 1 Week 2 WeeksNIOSH 0500 (Nuisance Dust, Total) Air $48 $36 $24 $20 $17 $14 $13 $12NIOSH 0600 (Nuisance Dust, Respirable) Air $48 $36 $24 $20 $17 $14 $13 $12NADCA Dust Analysis Dust $48 $36 $24 $20 $17 $14 $13 $12 Airborne Dust PM10 (40 CFR Part 50.6 Appendix J)* Air $96*** $72*** $48 $40 $34 $28 $26 $24Airborne Dust PM2.5 (40 CFR Part 50.6 Appendix L)* Air $96*** $72*** $48 $40 $34 $28 $26 $24Airborne Dust TSP (40 CFR Part 50.6 Appendix B)* Air $96*** $72*** $48 $40 $34 $28 $26 $24

* Price includes pre and post weigh of 8"x10" filter. For Lead analysis on the TSP, PM10, or PM2.5 filter, see Lead section page 17.** Same Day Turn-Around-Times (anything less than 24 hours) are subject to restrictions including but not limited to Lab operational hours. Same day TATs are available on some tests, please call.*** Analyses performed <24 Hrs are in non-compliance with official EPA sample stabilization times. Report will be qualified.Turn-Around-Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day.


IAQ

Pro

ducts

VOC Air Sampling Canister Included in Analytical Fee,


Lighthouse Particle Counter 0.3 – 10 μm

Product Number: 8710001List Price:

$3,500.00 USD

EMSL Carpet Sampling Kit 25mmProduct Number: 8715314


Radon Testing KitProduct Number: RADN1

Call for Pricing

Allergen Sampler KitProduct Number: 8715600


TSI IAQ-CALC 7545CO, CO2, Temp

& Humidity MeterProduct Number: 8703701


Protimeter SurveymasterProduct Number: 8703002


VOC Air Sampling Canister Regulator

(4Hr, 8Hr or 24Hr, etc.) Included in Analytical Fee,


Fluke TiR - IR CameraProduct Number: 8710009


EMSL Products CatalogCall 888.958.8170 or

Visit www.emsl.com for a FREE copy!


IAQ Laboratory Services

ALLERGENS (Dust cassette/Vacuum Kit) METHOD Code 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks

Indoor Allergen, Latex (Hev b 5, Hev b 6.02) by ELISA M033 Call Call $300 $240 $192 $156

Indoor Allergen, Cat (Fel d 1) by ELISA M034 Call Call $108 $84 $66 $54

Indoor Allergen, Dog (Can f 1) by ELISA M035 Call Call $108 $84 $66 $54

Indoor Allergen, Cockroach (Bla g 1) by ELISA M036 Call Call $108 $84 $66 $54

Indoor Allergen, Dust Mites (Der p 1 & Der f 1) by ELISA M037 Call Call $125 $100 $80 $65

Indoor Allergens Group (Cat, Dog, Cockroach, Dust Mites) M044 Call Call $150 $120 $95 $75

Indoor Allergen, Mouse (Mus m 1) by ELISA M038 Call Call $180 $144 $114 $90

Indoor Allergen, Rat (Rat n 1) by ELISA M039 Call Call $180 $144 $114 $90

LEED Certification - Leadership in Energy and Environmental Design Certificate Sampling* 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks

TVOC (EPA TO-15 + Library Search + TVOC Calculation) Call Call $1,261 $976 $825 $680

Carbon Monoxide (CMS method)

New Rug Odor 4-Phenylcyclohexane (4-PCH) (OSHA CSI Method)

Formaldehyde (NIOSH 2016)

PM10 (EPA Method IP-10A)

Dust Particle Identification (IAQ) Equipment / Purpose 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks

Common Particle ID ID of large components such as fibers $438 $344 $275 $225 $188 $125

Full Particle ID ID common indoor/outdoor contaminants only $1,925 $1,513 $1,210 $990 $825 $550

RADON* METHOD Same Day 1 Day 2 Days 3-5 Days

Real Estate Transaction Kit (1-10 Kits - price per kit) 2 Liquid Scintillation Vials $125 $30 $25 $20

Real Estate Transaction Kit (11-50 Kits - price per kit) 2 Liquid Scintillation Vials Call Call Call $15

Real Estate Transaction Kit (51-99 Kits - price per kit) 2 Liquid Scintillation Vials Call Call Call $12

Real Estate Transaction Kit (100+ Kits - price per kit) 2 Liquid Scintillation Vials Call Call Call $10

Homeowner Test Kit (1-10 Kits - price per kit) 1 Liquid Scintillation Vial $75 $25 $20 $15

Homeowner Test Kit (11-50 Kits - price per kit) 1 Liquid Scintillation Vial Call Call Call $10

Homeowner Test Kit (51-99 Kits - price per kit) 1 Liquid Scintillation Vial Call Call Call $8

Homeowner Test Kit (100+ Kits - price per kit) 1 Liquid Scintillation Vial Call Call Call $7

Please call for radon in air long-term alpha track pricing

Airborne Irritants, Fumes, Odors and/or Contaminants METHOD 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks

Acid SCAN, inorganic by IC (Hydrobromic Acid, Hydrochloric Acid, Hydrofluoric Acid,

Nitric Acid, Phosphoric Acid, Sulfuric Acid) NIOSH 7903 $456 $380 $242 $182 $152 $140

Capsaicin (pepper spray) OSHA CSI $726 $605 $484 $363 $303 $242

alpha-Chloroacetophenone (Tear gas, CN or CS police grade) CSI Method $726 $605 $484 $363 $303 $242

Chlorpyrifos (Dursban) NIOSH 5600M $273 $228 $182 $136 $114 $91

Formaldehyde NIOSH 2016/3500 $218 $182 $145 $109 $91 $73

New Rug Odor (4-Phenylcyclohexene or 4-PCH) CSI Method $495 $413 $330 $248 $206 $165

Nicotine mod. NIOSH 2544/2551 $330 $275 $220 $165 $138 $110

Nicotine (Bulk or wipe) mod. NIOSH 2551 Call Call Call Call $344 $275

*Radon Cost includes test device and analysis; $ 5.00 Surcharge for Samples from NJ, FL, and IL for state specific reporting requirements.

Turn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day

38

MATER IALS SC IENCE & FORENS IC LAB D IV IS ION

EMSL Analytical, Inc. provides a wide variety of materials testing, characterization, and forensiclaboratory services at the Materials Science Laboratory in New Jersey. Our team includes

Ph.D. scientists with substantial industry and academic credentials, and professionals withmany years of experience in materials testing services. Our team can design and imple-ment testing programs, and offer solutions to challenges in manufacturing, quality assur-ance, and research and development. Using a broad array of instrumentation, we regu-larly provide Elemental Analysis (WDXRF, EDX, ICP, AA, Auger Microprobe),Structural Analysis (XRD, NIR, FTIR), Microscopy Analysis (Light and Electron

Microscopy SEM/TEM), Mechanical and Metallurgical Testing, and Particle Size andDistribution. The Particle Identification Analysis package is designed to cover multiple

levels of complexity and includes Common Particle Identification, Full ParticleIdentification, and Unknown Material Identification. Additionally, we provide customized

analyses for Contamination & Quality Control, Surface Analysis, Characterization of coatings andthin films, Failure and Forensic, Electronics Packaging Failure, Polymers characterization to name only a few. Ourcapabilities allow us to quickly develop new methodologies to meet new industry challenges and client needs. We oftenfunction as “virtual resources” to our clients, complementing their own capabilities.

Our Materials Science Laboratory maintains a five-day operational hours schedule as well as emergency responseplan for off hours and/or weekend operating hours. Samples are received during regular business hours and Turn-Around-Times (TAT) are tracked on business days from the time samples are received at the laboratory. The Turn-Around-Times offered include rush same day or next business day as well as 3 day, 4 day, 1 week or 2 week TATs.Costs/rates are weighted based on the turn-around time requested with our 2 week TAT rates being the most eco-nomically cost effective for our customers. Key tests include (but not limited to) the following:

MATERIAL IDENTIFICATION/CHARACTERIZATION• Common Particle ID of large components such as fibers• Full Particle ID of common indoor/outdoor contaminants • Basic Materials Identification of solid components• Advanced Material Identification of all components

(solid & liquid)

COMBUSTION-BY-PRODUCTS• NIOSH 5000-Carbon Black, Black Carbon/Soot, Wildfires

and residential fire debris, Source Confirmation

COMBUSTIBLE DUST• Sample Characterization, Minimum Explosive

Concentration (MEC), Minimum Ignition Temperature (MIE), Maximum Normalized Rate of Pressure Rise (Kst), Class II Testing

PARTICLE SIZING• Mechanical Sieve, Sonic Sieve, Microscopy, Laser

Interferometry, Zeta Potential, Pore Size Analysis

PHYSICAL TESTING• Compression, Tension, Torsion Flexure, Hardness,

Unconfined Compression

PETROGRAPHIC AND SOILS• Full Petrographic Analysis, Soil Grain Size, Soil Resistivity,

Liquid & Plastic Limits, Porosity, Percolation Rate, Soil Classification

RoHS - Restriction of Hazardous Substances (by XRF, ICP, CVAA, GC/MS)• Lead (Pb)• Mercury (Hg)• Cadmium (Cd)• Hexavalent Chromium (Cr VI)• Polybrominated biphenyls (PBB 's )• Polybrominated Diphenyl Ethers (PBDE 's )

OTHER COMMON METHODS/APPLICATIONS• Explosive Residue EPA 8330A/B (17 common explosives)• Surface Tension ASTM D1331 • GERMAN VDI3492 Asbestos and Fibrous Glass by SEM• Asbestos-Free Validation Used for Talc Mines etc.

(PLM,SEM,TEM,XRD) • Autoignition ASTM E1491 • Viscosity ASTM 2857, 2270• Solids Concentration Total, Suspended or Dissolved• Paint Identification ID the Type of Paint, Fillers and

Pigments Present• UV Effect on Fabric Over Time• Reflectance (Spectral Reflectance) per Military (MIL) specs • Algae ASTM D3731- Measurement of Algae in Surface Waters • Field Emission Scanning Electron Microscopy (FESEM).• Microstructural characterization by electron microscopy

(SEM/TEM) — grain structure, defects, boundary/interfaces, quantitative image analysis.

• Thin films/coatings analysis by XRD, XRF, SEM — multi-layer thickness, stoichiometry, roughness, preferred orientation.

• Metallurgical analysis by optical microscopy (OM) — microstructure, fracture mode, porosity, inclusion rating, volume fraction count.

• Microelectronics analysis—cross-section, failure and defects, contamination, packaging problems, electron microscopy imaging.

• Thermal analysis by DSC, TGA—characterization of polymer blends, polymer crystallization and degradation, glass and phase transition, melting temperatures, thermal stability, residual solvent levels.

• Pharmaceutical product purity; characterization of water of hydration.• Food product applications—characterization of starches, protein

denaturation, determination of fat content, moisture content.• Failure analysis—fractography, corrosion, material evaluation.• Forensic analysis—product integrity, chemical identification, residual

analysis.• Product evaluation and comparison—compliance, conformance,

performance.• Method development and validation.• Sample preparation—sectioning, grinding, electro- and ion polishing,

cryo-milling, filtering, pressing, fusion, heat treatment.• Consulting and expert witness services.• Various ASTM and NIOSH Methodologies (call for list)

IAQ Related Testing/Materials Science/Forensics Laboratory Services

Materials Identification Equipment / Purpose 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksCommon Particle ID ID of large components such as fibers $438 $344 $275 $225 $188 $125

Full Particle ID ID common indoor/outdoor contaminants only $1,925 $1,513 $1,210 $990 $825 $550

Basic Materials Identification Identification of solid components Call Call $1,650 $1,350 $1,125 $950

Advanced Material Identification Identification of all components (solid & liquid) Call Call $3,300 $2,700 $2,250 $1,500

MMVF’s (Fibrous Glass, etc) Equipment / Purpose 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksTotal Count MMVF Total MMVF only (NIOSH 7400) $420 $330 $264 $216 $180 $120

MMVF with Asbestos ID and quantify MMVF's and Asbestos $1,050 $825 $660 $540 $450 $300German VDI-3492 Analysis per Method VDI-3492 $1,225 $963 $770 $630 $525 $350

MMVF - Full Analysis ID and quantify all MMVF's $1,050 $825 $660 $540 $450 $300

Combustion By-Products Equipment / Purpose 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksNIOSH 5000 Gravimetric analysis only for Carbon Black $175 $138 $110 $90 $75 $50

NIOSH 5000 with Confirmation Includes TEM Confirmation $1,225 $963 $770 $630 $525 $350

Combustion By-Products Wipe & Bulk Samples (Soot, CB, Char, Ash) $1,225 $963 $770 $630 $525 $350

Combustion By-Products Wipe & Bulk Samples (Char and Ash only by Optical Microscopy) $438 $344 $275 $225 $188 $125Source Confirmation by GC/MS ID the source of Soot (Additional $400/Sample)

NFPA Flammability Testing Equipment / Purpose 2 Week TAT*

Flash Point ** ASTM D56 $75

Autoignition ASTM E1491 $350Flame Spread Index NFPA 255/ASTM E84 - Flame Spread Index $950

Smoke Density Index NFPA 286 - Smoke Density $750Thermal Conductivity Hot Plate Method ASTM C177 or E1225 $500

Combustible Dust Testing** Equipment / Purpose 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks

Initial Analysis/Sample Characterization % pass 40 mesh, % moisture, % combustible dust N/A $825 $660 $540 $450 $300

Go/No Go Testing*** ASTM E1226 / screening to determine if material is explosive N/A N/A Call Call $773 $500Explosion Severity ASTM E1226 / Kst, Pmax, (dP/dT)max N/A N/A Call Call Call $1,400

Minimum Explosive Concentration (MEC) ASTM E1515 N/A N/A Call Call Call $850Minimum Ignition Energy (MIE) ASTM E2019 N/A N/A Call Call Call $850

Minimum Ignition Temperature (MIT) ASTM E1491 N/A N/A Call Call Call $850Resistivity (volume) Metal Dust N/A N/A Call Call Call $850

Class II Dust Analysis Kst, Pmax, (dP/dT)max, MEC, MIT, MIE, IS, ES N/A N/A Call Call Call $3,900Sample Milling Cannot be waived if needed to pass 40 mesh N/A N/A N/A N/A N/A $350

Oil Mist / Metal Working Fluid Equipment / Purpose 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksNIOSH 5026 Airborne Oil Mist with Type Identification (by FTIR) $875 $688 $550 $450 $375 $250

NIOSH 5524 Oil Mist/ Metal Working Fluid-Total (Gravimetric Analysis) $96 $66 $44 $33 $25 $22NIOSH 5524 Oil Mist/ Metal Working Fluid-Extractable (Gravimetric Analysis) $120 $90 $75 $60 $50 $45

Chinese Drywall Testing Equipment / Purpose 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks 4 Weeks

Elemental Sulfur (S) BNA Extraction Call Call $450 $375 $300 $150 N/A

SEM/EDX for Copper Sulfides (wipes, copper surfaces) SEM/EDX $525 $413 $330 $270 $225 $150 N/AVOC's for Sulfur-Based Gases TO-15 N/A $840 $720 $600 $480 $240 N/A

Accelerated Corrosion Study Chamber Testing N/A N/A N/A N/A N/A N/A $1,000Impurities (Fe, Sr, Mg) XRF/SEM/PLM/XRD Call $825 $660 $540 $450 $300 N/A

Total Strontium ICP Call $109 $85 $73 $67 $61 N/A

Additional Miscellaneous Equipment / Purpose 2 Week TAT*

NIOSH 7404 Cellulose Insulation in Airborne Samples $300

NIOSH 7502 Zinc Oxides $400NIOSH 7504 Vanadium Oxides $500

NIOSH 7505 Lead Sulfide (Oxides) $500NIOSH 7506 Boron Carbide $500

NIOSH 7602 Silica in Airborne Samples $300* Expedited service is available; call for information. A minimum charge of $100 applies to each order.

** Due to disposal regulations, sample shipping fees back to client may apply

*** If testing results is "Go", the analysis will by default be upgraded to Explosion Severity Testing

Turn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day, excludes weekends and holidays.



Materials Science/Forensics Laboratory Services

X-Ray Diffractometry (XRD) Equipment / Purpose 2 Week TAT*

Single Analyte (Specify) Crystalline Materials $300Each Additional Analyte Add $100

Maximum Charge $600

Fourier Transform Infrared Spectrometry (FTIR) Equipment / Purpose 2 Week TAT*

Single Analyte (Specify) (NIOSH 3800 for Quantification) $300Each Additional Analyte Add $100

Maximum Charge $600

X-Ray Fluorescence Spectrometry (XRF) Equipment / Purpose 2 Week TAT*

Single Analyte (Specify) Single Element or Oxide Concentration $300Each Additional Analyte Add $100

Maximum Charge $600

TGA or DSC Equipment / Purpose 2 Week TAT*

Thermo-Gravimetric Analysis (TGA) From 0 to 900 degrees C $400Differential Scanning Calorimetry (DSC) From -25 to 600 degrees C $400DYNAMIC MECHANICAL ANALYSIS (DMA) From -150 to 1,500 degrees C Starts at $450/Sample

Auger Electron Spectrometry (AES/SAM) Equipment / Purpose 2 Week TAT*

Surface analysis, depth profile $1,000

Nuclear Magnetic Resonance Spectroscopy (NMR) Equipment / Purpose 2 Week TAT*

Nuclear Magnetic Resonance Spectroscopy (NMR) NMR/Molecular structure analysis Price per project

Particle Sizing Equipment / Purpose 2 Week TAT*

Mechanical Sieve Minimum particle size ~75 microns $125Mechanical Sieve w/ Hydrometry (ASTM D422) Soil Grain Size Analysis $250Sonic Sieve Minimum particle size ~10 microns $350Microscopy Minimum particle size ~0.1 microns $550Laser Interferometry Minimum particle size < 1 nanometer $650Zeta Potential Zeta Potential (Sample Received pH) $650Isoelectric Point Minimum particle size < 1 nm $650Filter Pore Size Analysis Minimum pore size 0.1 microns $550

Mass Analysis Equipment / Purpose 2 Week TAT*

Sample Weight Any pre- & post- weights (cassettes/tubes) $75Solids Concentration Total, Suspended or Dissolved $75

Additional Miscellaneous Equipment / Purpose 2 Week TAT*

ASTM D854 Specific Gravity $75ASTM D2974 Moisture, Organic Matter & Ash $150ASTM D4972 pH (Soil) $75ASTM D1293 pH (Water) $75ASTM D1125 / D5391 Conductivity (Water) $75ASTM D5542 Trace anions in water (Ion Chromatography) Starts at $200ASTM D2008 Volatility Rate by TGA $300ASTM E1131 Compositional Analysis by TGA $400ASTM E334 General Techniques for FTIR Analysis $600ASTM D6375 Evaporating Loss of Lubrication Oils by TGA $400ASTM D6370 Rubber to Carbon Black Composition by TGA $400ASTM D5832 VOC Content of Activated Carbon by TGA $300

Environmental Chamber Rentals 1st Week Additional Weeks

Large Chamber Price per project Price per project

Small Chamber Price per project Price per project

* Expedited service is available; call for information. A minimum charge of $100 applies to each order.

Turn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day, excludes weekends and holidays.


Materials Science/Forensics Laboratory Services

Physical Testing Equipment / Purpose 2 Week TAT*Compression ASTM D695 / D395 $300Tension/Tensile ASTM D628 / D882 / D412 / E8 $300Torsion Requires Consult with Materials Lab $500Flexure (3 or 4 Point) $500Hardness (Knoop/Vickers, Brinell) $300Abrasion Taber Rotary or Linear Method $500Unconfined Compression Cement and Rock Cores, Requires Consult with Materials Lab $300Impact Resistance Tinius Olson Impact Tested $500Coefficient of Friction ASTM C1028 $300Petrographic and Soils Equipment / Purpose 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks*Full Petrographic Analysis Characterize all components, porosity etc. Call Call Call Call Call $750Soil Grain Size (Sieve only) Modified ASTM D422 Call Call $275 $225 $185 $125Soil Grain Size w/Hygrometry ASTM D422 Call Call Call Call Call $250Soil Resistivity ASTM G57 - Wenner Method Call Call $660 $540 $450 $300Soil Liquid & Plastic Limits ASTM D4318 Call Call $660 $540 $450 $300Porosity Requires Consult with Materials Lab Call Call $660 $540 $450 $300Percolation Rate $500Silt Density ASTM D4189 Call Call Call Call Call $300Soil Compaction ASTM D698 Call Call Call Call Call $300Soil Classification (Full Method) Full ASTM D2487 & D2488 Call Call Call Call Call $650Soil Classification (Modified) Modified ASTM D2487/OSHA ID-194 Call Call Call Call Call $500Soil Evaluation for Nematodes Identification of Nematodes Detrimental to Crops Call Call Call Call Call $300Acid Solubility AWWA B100-01 $455 $358 $286 $234 $195 $130Specific Gravity/Absorption ASTM C127 $236 $206 $165 $135 $113 $75Turbidity API RP 56 N/A $275 $220 $180 $150 $100Sphericity and Roundness API RP 56 N/A $275 $220 $180 $150 $100MOHS Hardness AWWA B100-01 $236 $206 $165 $135 $113 $75Other Common Methods and Applications Equipment / Purpose 1 Day 2 Days 3 Days 4 Days 1 Week 2 Weeks*RoHS XRF, ICP, CVAA, GC/MS, etc. Call Call Call Call Call $950Explosive Residue EPA 8330A/B (17 common explosives) Call Call Call Call Call $400Surface Tension ASTM D1331 Call Call $660 $540 $450 $300GERMAN VDI3492 Asbestos and Fibrous Glass by SEM Call Call Call Call Call $350Asbestos-Free Validation Used for Talc Mines etc. (PLM,SEM,TEM,XRD) Call Call Call Call Call $750Standard Addition, Requires Client Consultation with Materials Lab ISA (Additional $100 if TEM required) Call Call Call Call Call $300Zinc Whiskers SEM Call Call $660 $540 $450 $300Viscosity (Cup Method), Requires Client Consultation with Materials Lab Ford Viscosity Cup Call Call Call Call Call $300Viscosity (Brookfield Viscometer) Brookfield Viscometer Price per projectHeat Value (BTU, solids and liquids only) Calorimeter Call Call $330 $270 $225 $150 Airborne Cement Dust OSHA ID-207 Call Call Call Call Call $300Paint ID ID one layer of paint for type Call Call Call Call Call $500Paint ID Multiple layer with mil spec ID up to five layers Call Call Call Call Call $750UV Effect on Fabric Determines the Effect of UV Light on Fabric Over Time Starts at $500Reflectance (Spectral Reflectance) per Military (MIL) specs Call Call Call Call Call $300Algae ASTM D3731 Measurement of Algae in Surface Waters Call Call Call Call Call $300Colorimetry Spectrophotometer Starts at $300Stain Identification Various Starts at $300/single analyteResidual Oxygen (head space) MOCON PacCheck 650 EC $350 $275 $220 $180 $150 $100Residual Carbon Dioxide (head space) MOCON PacCheck 650 EC $350 $275 $220 $180 $150 $100Total Organic Carbon (TOC) Oxidation Method / ASTM D4779 $228 $179 $143 $117 $98 $65Total Carbon (C) LECO Combustion $263 $206 $165 $135 $113 $75Total Sulfur (S) LECO Combustion $263 $206 $165 $135 $113 $75

Case Studies Equipment / Purpose 2 Week TAT*Corrosion of existing material Pipes, Metal Surfaces, etc. Price per project

Full Corrosion Study Effects of multiple liquids on surfaces Price per projectCorrosion Analysis NACE Standard TM0172 Price per project

Oxidation or Staining on Metallic Tools ID Only Price per projectAdditional Services (Contact us for these services or any item not listed) Call to Discuss

• Field Emission Scanning Electron Microscopy (FESEM).• Microstructural characterization by electron microscopy (SEM/TEM) — grain structure, defects,

boundary/interfaces, quantitative image analysis.• Thin films/coatings analysis by XRD, XRF, SEM — multi-layer thickness, stoichiometry, roughness, preferred

orientation.• Metallurgical analysis by optical microscopy (OM) — microstructure, fracture mode, porosity, inclusion rating,

volume fraction count.• Microelectronics analysis — cross-section, failure and defects, contamination, packaging problems, electron

microscopy imaging.• Thermal analysis by DSC, TGA — characterization of polymer blends, polymer crystallization and degradation,

glass and phase transition, melting temperatures, thermal stability, residual solvent levels.

• Pharmaceutical product purity; characterization of water of hydration.• Food product applications — characterization of starches, protein denaturation, determination of fat content,

moisture content.• Failure analysis — fractography, corrosion, material evaluation.• Forensic analysis — product integrity, chemical identification, residual analysis.• Product evaluation and comparison — compliance, conformance, performance.• Method development and validation.• Sample preparation — sectioning, grinding, electro- and ion polishing, cryo-milling, filtering, pressing, fusion,

heat treatment.• Consulting and expert witness services.

* Expedited service is available; call for information. A minimum charge of $100 applies to each order.Turn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day, excludes weekends and holidays.

42

EMSL Analytical Inc. provides Environmental Chemistry Laboratory Services for testing primarily related to sampling for RCRA (Resource Conservation & Recovery Act),

SPDES (State Pollution Discharge Elimination System), NPDES (National PollutionDischarge Elimination System), CWA (Clean Water Act), SDWA (Safe DrinkingWater Act), CAA (Clean Air Act), as well as for Environmental Site Investigations(i.e.: Phase I, Phase II), Remediation Projects, and various Municipal, City, or Stateprograms requiring the testing and analysis of Drinking Water, Waste Water,Surface Water, Ground Water, Bulk Waste, Soil, Solids, Oils, and/or Air Samples.Samples are analyzed by EPA Standard Methods, NIOSH Methods, ASTM or

OSHA ID Methods as well as various state specific methodologies. The EMSL analytical process for the analysis and reporting of the individual sample is part of an

overall program that includes analysis of Quality Control Samples and programs such asInstrument QC controls, calibration standard checks, duplicates, and reporting limit controls

to ensure the confidence limits of the data are within the acceptable range as specified by the method requirementsand our Quality Control Programs.

The Laboratory maintains NELAC certification status from our primary home state certification (NJDEP) as well as multiple state certifications from various states for various parameters (field of tests). As part of the certificationstatus, our Chemistry Lab complies with regular on-site audits from regulatory agencies and participates in a rigorousand extensive proficiency testing program. Field of Testing certification parameters routinely are updated/changed bythe State regulatory agencies so EMSL provides the most current copy of our test parameter certifications on ourweb site. If a new state certification or field of test is requested by a client for our lab, EMSL may update our certification if it makes good business sense.

The laboratory provides testing for Organics (by GC-FID, GC-ECD, GC-NPD, and GC-MS), Metals (GF-AA, CV-AA, ICP, ICP-MS), and Wet-Chemistry (IC, etc.). Most testing is primarily performed at our Corporate Environmental Chemistry Lab in New Jersey with some Metals Testing and limited Wet Chemistry Tests capabilitiesat our some of our other labs supporting local programs and/or projects. Our Environmental Chemistry labs maintainbusiness day operational hours including weekend scheduling availability as needed for critical response situations.Samples are received during regular business hours and Turn-Around-Times are tracked on business days. Lab Turn-Around-Times offered include same day or next day, as well as for 2 day, 3 day, 4 day, 1 week, and 2 weekStandard TATs. Costs/rates are weighted based on the Turn-Around-Time requested with our 2 week TAT ratesbeing the most economically cost effective for our customers.

Sample control/processing (log-in, results data-entry, reporting) is facilitated by our computer LaboratoryInformation Management System (LIMS) which tracks individual samples and Sample Delivery Groups (SDG) to help ensure we meet the clients specified due dates and special instruction directives such as reporting value dataobjectives and/or special QC requirements specific to the SDG. Additionally, the LIMS includes security controls to ensure that information is controlled (locked) once the data has been documented and entered by the BenchChemists. Reports are delivered at the choice of the customer which would include email, hard-copy regular mail, or both. Additionally, EMSL can provide Electronic Data Deliverables (EDD), as well as various QC Data Packages(RDD, ASP, CLP, etc.) if required. Key tests include (but not limited to) the following:

E N V I R O N M E N T A L C H E M I S T R Y L A B D I V I S I O N

ORGANICS• Volatile Organic Compounds (VOC’s)• Semi-Volatile Organic Compounds (SVOC’s)• Alcohols/Glycols (Ethylene, Propylene)• Petroleum Hydrocarbons/DRO/GRO• Pesticides/ Herbicides• Polychlorinated Biphenyls (PCB’s)• Polychlorinated Aromatic Hydrocarbons• Phthalates

METALS (ICP, ICP/MS, CVAA, FLAA)• Individual Elements• Multi-Element Discount Packages• Precious Metals (waste water)• RCRA 8 Metals• TAL Metals/PP Metals• Solder Metals Profile (air)• Welding Fumes Profile (air)• EPA Drinking Water Primary List

TCLP / HAZWASTE• Ignitability, Corrosivity, Reactivity• TCLP RCRA Metals• TCLP VOA• TCLP BNA• TCLP Pesticides• TCLP Herbicides• Priority Pollutant List TAL/TCL Lists

WET CHEMISTRY• Acidity/Alkalinity/pH/Anions by IC/BOD/COD/

Dissolved Oxygen/Color/Chlorine/Chloramines/Cyanide/Flashpoint/ Free Liquid/Hexavalent Chromium/Langlier Index/Nitrogen (Ammonia/Organic/TKN)

• Oil and Grease (polar and non-polar)• Phenols/Phosphorous/ Sulfide/Sulfite• Solids (TDS, TSS, TVS, TVSS)• Specific Conductance, Specific Gravity• Surfactants (MBAS)/Turbidity


ORGANICS Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksVOA (BTEX) by GC/MS 624/8260B Call $273 $226 $198 $176 $109 $91 VOA by GC/MS 624/8260B Call $345 $270 $240 $210 $170 $111VOA + 15 by GC/MS 624/8260B Call $370 $295 $265 $235 $195 $136VOA by GC 504.1/8011 Call $249 $204 $165 $143 $110 $83VOA Drinking Water by GC/MS 524.2 Call $435 $325 $286 $242 $176 $145 VOA - NYS STARS List by GC/MS 8260B Call $273 $226 $198 $176 $109 $91 AE (SVOC-Acid Extractables) by GC/MS 625/8270D Call $528 $352 $290 $254 $230 $176 Alcohol Scan by GC 8015C Call $309 $204 $182 $152 $121 $103BN (SVOC-Base Neutral Extractables) by GC/MS 625/8270D Call $528 $352 $290 $254 $230 $176BN + 15 + SIM 8270D Call $834 $557 $454 $394 $315 $278BN - NYS STARS list by GC/MS 8270D Call $420 $286 $254 $230 $206 $140 BNA (SVOC Base Neutral & Acid Extractables) by GC/MS 625/8270D Call $834 $557 $454 $394 $315 $278 BNA + 25 by GC/MS 625/8270D Call $859 $582 $479 $419 $340 $303Glycol Scan by GC 8015C Call $309 $204 $182 $152 $121 $103PAH's by GC/MS 625/8270D Call $528 $352 $290 $254 $230 $176Polychlorinated Biphenyls (PCBs) Solid/Soil/Water EPA SW-846 3550B/8082A/608 Call $240 $185 $150 $130 $100 $75PCBs - Bulk Sample, Caulking/Concrete/Paint Chips EPA SW-846 3540C/8082A Call $250 $195 $170 $145 $120 $85PCBs - Wipe Sample EPA SW-846 3550B/8082A Call $240 $185 $150 $130 $100 $75PCBs - Oil Sample EPA SW-846 3580A/8082A Call $175 $120 $100 $90 $80 $70PCBs - Air Sample NIOSH 5503 Modified Call $220 $150 $110 $95 $85 $55PCBs - Air Sample EPA TO-10A N/A Call Call $250 $220 $165 $140PCBs - Air Sample EPA TO-4A N/A Call Call $454 $394 $315 $278Pesticides by GC 608/8081B Call $291 $220 $194 $164 $128 $97 Pesticides/PCBs by GC 608/8082A/8081B Call $435 $330 $286 $242 $176 $145Creosote 8015A Call $450 $350 $300 $250 $200 $150Petroleum Hydrocarbons Finger Print by GC 8015C Call $399 $264 $212 $176 $145 $133 Extractable Petroleum Hydrocarbons NJDEP-EPH Call $414 $275 $220 $193 $165 $138TPH as Gasoline (GRO) by GC 8015C Mod Call $273 $204 $182 $152 $121 $91 TPH as Diesel (DRO) by GC 8015C Mod Call $291 $220 $194 $164 $128 $97 TCLP / HAZWASTE Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksTCLP (Full) Organic and Inorganics SW-846, 8260, 8270, 8081, N/A N/A N/A Call $1,573 $1,210 $999(does not include characterization I/C/R)* 6010C, 7470A, 8151ARCRA Characterization (ICR) SW-846 N/A N/A $470 $370 $319 $266 $225Ignitability (performed as Flash Point) SW-846 1010 Mod Call $183 $134 $107 $91 $76 $61Corrosivity (performed as pH) SW-846 9045D Call $161 $122 $67 $57 $47 $37 Reactivity (Total Cyanide & Total Sulfide) SW-846 9010B/9014 SW-846 9030/9034 Call $501 $314 $261 $227 $189 $167 TCLP 8 Metals - (RCRA 8 List)* 1311/6010C/7470A N/A N/A Call $159 $144 $137 $130 TCLP Metal(s)* price for single element with TCLP (except Hg)** 1311/6010C N/A N/A Call $80 $69 $64 $60TCLP Mercury (Hg) Only* 1311/7470A N/A N/A Call $128 $109 $97 $85 TCLP BNA* 1311/8270D N/A N/A Call Call $479 $387 $351 TCLP VOA* 1311/8260B N/A N/A N/A Call $303 $224 $152 TCLP Pesticides* 1311/8081B N/A N/A N/A Call $266 $194 $133 TCLP Herbicides* 1311/8151A N/A N/A N/A Call $333 $237 $200*Includes the cost/fee for 1311 prep/extraction or SPLP (EPA 1312) if requested ** Additional elements at $10 per element except Mercury.

PP LIST, TAL/TCL LIST Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksPriority Pollutants (PP List) + 40 SW-846, 8260, 8270, 8082A, 8081B, Call Call Call $1,326 $1,149 $957 $797

6010C, 7471B, 9014, 9065Target Analyte List & Target Compound List SW-846, 8260, 8270, 8082A, 8081B, Call Call Call $1,150 $1,070 $890 $748(TAL & TCL + 30) 6010C, 7471B

MISCELLANEOUS Per SampleEncore Sampler $30 (for 3 encores)Sample Composite $25 REPORTING PriceNJ deliverable or NYS Category “B” deliverable package 15% Surcharge (minimum $150 per package)NJ hazsite electronic deliverable $25CANCELLATION OF ANALYSIS PriceSamples logged in and not analyzed, per client directive to stop $20 per sampleSamples cancelled after analysis has begun, per client directive to stop Billed for all extraction and analyses that have been completed

at the time of cancellationSamples received late into analysis holding time Rush TAT surcharge will be applied



Environmental Chemistry Laboratory Services


Metals Laboratory Services

METALS - Potable (DW) & Non-Potable Water Samples (GW/WW) Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksIndividual Element by ICP (Excludes Hg) 200.7/6010C Call $105 $66 $55 $44 $39 $35

(Price for first element; additional elements @ $10 each)

Mercury (Hg) by CVAA 245.1/7470A $150 $125 $90 $70 $60 $55 $50

Metals by ICP-MS (Price for first element; additional elements @ $10 each) 200.8/6020A Call $109 $85 $73 $67 $61 $55

RCRA 8 Metals 200.8/7470A Call $158 $134 $119 $112 $105 $95

Priority Pollutant Metals (13) 245.1/6010C/6020A/200.7/200.8/7470A Call $193 $169 $154 $147 $140 $120

TAL Metals (23) 245.1/6010C/6020A/200.7/200.8/7470A Call $205 $192 $186 $180 $160 $150

EPA Drinking Water Primary Metals (12) 200.7/200.8/245.1 Call $404 $315 $242 $212 $200 $180

Precious Metals in GW/WW only (Gold, Palladium, or Platinum)* 3111B Call $180 $109 $85 $73 $67 $61

* Price per element

METALS - Air Sample Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksIndividual Element by ICP/ICP-MS (excludes Hg) 7300M/7303 $150 $78 $55 $44 $36 $33 $26

(Price for first element; additional elements @ $10 each)

Mercury (Hg) by CVAA 6009/ID145/ID140 $150 $125 $90 $70 $60 $55 $50

Solder Metals (9) Profile 7300M/7303 Call $150 $135 $120 $90 $62 $50

Welding Profile (15) 7300M/7303 Call $216 $185 $165 $129 $86 $72

RCRA Metals (8) 7300M/7303/6009 Call $144 $122 $109 $104 $95 $85

Priority Pollutant Metals (13) 7300M/7303/6009 Call $179 $157 $144 $139 $130 $120

METALS - Soil/Solid/Wipe/Sludge Sample Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksIndividual Element by ICP (Excludes Hg) 6010C Call $105 $66 $55 $44 $39 $35(Price for first element; additional elements @ $10 each)

Mercury (Hg) by CVAA 7471A $150 $125 $90 $70 $60 $55 $50

RCRA 8 Metals 6010C/7471B Call Call $158 $134 $119 $112 $105

Priority Pollutant Metals (13) 6010C/7471B Call Call $193 $169 $154 $147 $140

TAL Metals (23) 6010C/7471B Call $330 $205 $192 $186 $180 $165

Appendix IX Metals (17) / CAM 17 Metals 6010C/7471B Call $300 $197 $182 $175 $168 $155

METALS - TCLP Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksTCLP RCRA 8 Metals* 1311/6010C/7470A N/A N/A Call $159 $144 $137 $130

TCLP Single Element* (Excluding Hg) 1311/6010C N/A N/A Call $80 $69 $64 $60(Price for single element; additional elements @ $10 each)

TCLP Mercury (Hg) Only* 1311/7470A N/A N/A Call $128 $109 $97 $85

*Includes the cost/fee for 1311 prep/extraction or SPLP (EPA 1312) if requested

Consumer Product TestingConsumer Products Method 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksTotal Lead in Paint and Surface Coatings* 16 CFR 1303/CPSC-CH-E1003-09.1 $210 $150 $120 $96 $85 $70

Total Lead in Children's Metal Jewelry/Products CPSC-CH-E1001-08.1 $210 $150 $120 $96 $85 $70

Total Lead in Children's Non-Metal Products CPSC-CH-E1002-08 $210 $150 $120 $96 $85 $70

Total Cadmium in Children's Metal Jewelry/Products CPSC-CH-E1001-08.1 Modified $210 $150 $120 $96 $85 $70

Total Cadmium in Children's Non-Metal Products CPSC-CH-E1002-08 Modified $210 $150 $120 $96 $85 $70

Phthalates CPSC-CH-C1001/3540C/8270D N/A N/A Call Call $450 $350

Soluble Heavy Metals** ASTM F963 N/A N/A $350 $275 $250 $220

Bisphenol A CPSC-CH-C1001/3540C/8270D N/A N/A Call Call $250 $150

*Additional metals may be analyzed @ $10 per element

**Antimony, Arsenic, Barium, Cadmium, Chromium, Lead, Mercury and Selenium

RCRA Metals: Ag, As, Ba, Cd, Cr, Hg, Pb, SePriority Pollutant Metals: Ag, As, Be, Cu, Cd, Cr, Hg, Ni, Pb, Sb, Se, TI, ZnWelding Fumes Metals: Al, Be, Cd, Cr, Co, Cu, Fe, Pb, Mn, Mo, Ni, Sb, Ti, V, ZnSolder Metals: Sb, Be, Cd, Cu, Co, Pb, Ag, Sn, ZnTAL Metals: Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, Pb, Sb, Se, Tl, V, ZnCAM17 Metals: Ag, As, Ba, Be, Cd, Co, Cr, Cu, Pb, Hg, Mo, Ni, Sb, Se, Tl, V, ZnAppendix IX Metals: Ag, As, Ba, Be, Cd, Co, Cr, Cu, Hg, Ni, Pb, Sb, Se, Sn, Ti, V, ZnEPA DW Primary List Metals: As, Ba, Be, Cd, Cr, Cu, Pb, Hg, Ni, Se, TI, SbEPA DW Secondary List Metals: Ag, Al, Fe, Mn, Na, ZnTurn-Around Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next business day Expedited TATs (anything less than 1 Week) subject to capacity restrictions and not guaranteed to be available - call/pre-schedule with lab to ensure capability and availability for expedited TATs


Wet Chemistry

PARAMETER Method Same Day 1 Day 2 Days 3 Days 4 Days 1 Week 2 WeeksAcidity SM 2310B Call $80 $53 $46 $37 $31 $28Alkalinity, Total SM 2320B Call $80 $53 $46 $37 $31 $28Anions GROUP SCAN by IC - Fluoride, Chloride, Nitrate SW-846 9056/EPA 300.0 Call $456 $380 $242 $182 $152 $140Nitrite, Bromide, Ortho-Phosphate as P, Sulfate

ASTM Leachate ASTM D3987-85 Call $176 $132 $113 $95 $76 $69BOD Carbonaceous (5 day/20 day) SM 5210B N/A N/A N/A N/A N/A $61 $55BOD-Biochemical Oxygen Demand (5 day/20 day) SM 5210B N/A N/A N/A N/A N/A $61 $55Bromide SW-846 9056/EPA 300.0 Call $165 $133 $85 $72 $48 $43Chemical Oxygen Demand EPA 410.4 Call $138 $107 $91 $76 $61 $55Chloride SW-846 9056/EPA 300.0 Call $165 $133 $85 $72 $48 $43Chlorine, Residual (Analyze Immediately)/Total Chlorine SM 4500-CL G Call $121 $94 $53 $53 $53 $48Chloramines SM 4500-CL G Call $176 $132 $113 $95 $76 $69Chlorate EPA 300.1 N/A $190 $158 $110 $97 $73 $68Chromium, Hexavalent (water) SM 3500 Cr-D Call $161 $133 $133 $133 $133 $120Chromium, Hexavalent (soil) SW-846 7196A/3060A Call $176 $132 $113 $95 $76 $69Color SM 2120B Call $70 $43 $36 $31 $24 $20Corrosivity (Performed as pH) SW-846 9045C Call $161 $122 $67 $57 $47 $37Cyanide SM 4500-CN C,D Call $160 $132 $113 $95 $76 $69Cyanide / Amenable Cyanide SM 4500-CN C,G Call $293 $265 $228 $189 $152 $140Cyanide SW-846 9010B/9014 Call $160 $132 $113 $95 $76 $69Dissolved Oxygen (Analyze Immediately) SM 4500-OC Call $43 $43 $43 $43 $43 $39Flash Point SW-846 1010 mod Call $138 $107 $91 $76 $61 $55Fluoride SW-846 9056/EPA 300.0 Call $165 $133 $85 $72 $48 $43Free Liquid Test SW-846 9095 Call $95 $67 $57 $47 $37 $33Hardness EPA 200.7 Call $76 $65 $54 $49 $45 $40Ignitability (Performed as Flash Point test) SW-846 1010 mod Call $134 $107 $91 $76 $61 $55Langlier Index Calculation Call $226 $188 $158 $138 $130 $117Moisture Calculation Call $14 $13 $11 $10 $8 $7Nitrate as N SW-846 9056/EPA 300.0 Call $165 $133 $85 $72 $48 $43Nitrite as N SW-846 9056/EPA 300.0 Call $165 $133 $85 $72 $48 $43Nitrogen, Ammonia SM 4500-NH3 B,C Call $138 $107 $91 $76 $61 $55Nitrogen, Organic SM 4500-NOORG Call $308 $239 $205 $171 $136 $122Nitrogen, Total Kjeldahl SM 4500-NH3 B,C Call $176 $132 $113 $95 $76 $69Oil & Grease (HEM) EPA 1664A/9071B Call $171 $143 $127 $110 $94 $85Oil & Grease (SGT-HEM) EPA 1664A/9071B Call $220 $193 $171 $154 $138 $124Ortho-Phosphate, as P SW-846 9056/EPA 300.0 Call $165 $133 $85 $72 $48 $43Paint Filter Test SW-846 9095 Call $95 $67 $57 $47 $37 $33pH (Analyze immediately) SM 4500 -pH B/EPA 150.1 Call $10 $10 $10 $10 $10 $10pH - Solid (<20% H2O) SW-846 9045D Call $122 $97 $67 $57 $47 $37Phenols EPA 420.1/SW 846 9065 Call $154 $119 $101 $85 $68 $61Phosphorus, Total as P SM 4500-P B,5 Call $138 $97 $83 $69 $61 $55Reactivity, Cyanide (as Total Cyanide) SW-846 9010B/9014 Call $176 $132 $113 $95 $76 $69Reactivity, Sulfide (as Total Sulfide) SW-846 9030B/9034 Call $176 $132 $113 $95 $76 $69Residue, Total SM 2540B Call $95 $67 $57 $47 $37 $33Solids, Settleable SM 2540F Call $80 $48 $42 $34 $31 $28Solids, Total SM 2540G Call $17 $12 $10 $9 $8 $7Solids, Total Dissolved SM 2540C Call $95 $67 $57 $47 $37 $33Solids, Total Fixed Suspended SM 2540E Call $95 $67 $57 $47 $37 $33Solids, Total Suspended SM 2540D Call $95 $67 $57 $47 $37 $33Solids, Total Volatile EPA 160.4 Call $95 $67 $57 $47 $37 $33Solids, Total Volatile Suspended SM 2540G Call $95 $67 $57 $47 $37 $33Specific Conductance (Conductivity) SM 2510B Call $67 $40 $34 $28 $23 $20Specific Gravity SM 2710F Call $67 $40 $34 $28 $23 $20Sulfate SW-846 9056/EPA 300.0 Call $165 $133 $85 $72 $48 $43Sulfide - Aqueous SM 4500-SD Call $176 $132 $113 $95 $76 $69Sulfide - Solid SW-846 9030B/9034 Call $176 $132 $113 $95 $76 $69Sulfite (Analyze Immediately) SM 4500 S03B Call $121 $121 $121 $121 $121 $109Surfactants (MBAS) SM 5540 C Call $220 $182 $182 $182 $182 $164Turbidity SM 2130 B/EPA 180.1 Call $50 $50 $50 $50 $50 $50



45

46

Radiochemistry Laboratory Services


Radiological Testing

GAMMA Spectroscopy in Groundwater, Drinking Water, Soil and Vegetation Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

Isotopes Analyzed For: Thallium-208, Lead-210, Lead-212, Lead-214, Bismuth-212, EPA 901.1 N/A N/A N/A $220 $180 $110Bismuth-214, Radon-219, Radium-223, Radium-224, Radium-226, Actinium-228, Thorium-227, Thorium-228, Thorium-230, Thorium-231, Thorium-234, Uranium-235, Protactinium-231, Protactinium-234, Potassium-40, Cobalt-60, Cesium-134, Cesium-137, Iodine-131

Tritium in Groundwater and Drinking Water Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

EPA 906.0 Call $300 $200 $125 $90 $70

Total Uranium in Groundwater and Drinking Water Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

ASTM D5174 Call $200 $150 $110 $80 $60

ALPHA Spectroscopy Method 1 Week 2 Weeks 3 Weeks

Isotopic Uranium EPA 908/910/911 Modified N/A N/A N/A $250 $180 $120

Isotopic Plutonium EPA 908/910/911 Modified N/A N/A N/A $250 $180 $120

Isotopic Thorium EPA 908/910/911 Modified N/A N/A N/A $250 $180 $120

Isotopic Americium EPA 908/910/911 Modified N/A N/A N/A $250 $180 $120

Gross ALPHA/BETA Analysis in Groundwater, Drinking Water and Soil Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

EPA 900 N/A $200 $150 $110 $80 $60

Strontium-90 Analysis in Groundwater and Soil Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

EPA 905 Modified N/A N/A N/A $180 $155 $125

Radium-226 Analysis in Groundwater, Drinking Water and Soil Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

HASL-300 N/A N/A N/A $180 $155 $125

Radium-228 in Groundwater, Drinking Water and Soil Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

SM-7500 N/A N/A N/A $180 $155 $125

Total Radium Analysis in Groundwater and Soil Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

EPA 903.0 Modified N/A N/A N/A $130 $110 $95

Technetium-90 Analysis in Groundwater Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

HASL-300 N/A N/A N/A $130 $110 $95

Radon-222 Analysis in Drinking Water Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

Liquid Scintillation Call Call Call $25 N/A N/A

Radon in Air* METHOD Same Day 1 Day 2 Days 3-5 DaysReal Estate Transaction Kit (1-10 Kits - price per kit) 2 Liquid Scintillation Vials $125 $30 $25 $20 Real Estate Transaction Kit (11-50 Kits - price per kit) 2 Liquid Scintillation Vials Call Call Call $15 Real Estate Transaction Kit (51-99 Kits - price per kit) 2 Liquid Scintillation Vials Call Call Call $12 Real Estate Transaction Kit (100+ Kits - price per kit) 2 Liquid Scintillation Vials Call Call Call $10 Homeowner Test Kit (1-10 Kits - price per kit) 1 Liquid Scintillation Vial $75 $25 $20 $15Homeowner Test Kit (11-50 Kits - price per kit) 1 Liquid Scintillation Vial Call Call Call $10 Homeowner Test Kit (51-99 Kits - price per kit) 1 Liquid Scintillation Vial Call Call Call $8 Homeowner Test Kit (100+ Kits - price per kit) 1 Liquid Scintillation Vial Call Call Call $7

Please call for radon in air long-term alpha track pricing

Bioassay TestingTotal Uranium in Urine Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

ASTM D5174 N/A N/A $150 $115 $85 $65

GAMMA Spectroscopy for Urine Samples Method 1 Day 2 Days 3 Days 1 Week 2 Weeks 3 Weeks

Isotopes Analyzed For: Thallium-208, Lead-210, Lead-212, Lead-214, Bismuth-212, EPA 901.1 Modified N/A N/A N/A $300 $250 $200Bismuth-214, Radon-219, Radium-223, Radium-224, Radium-226, Actinium-228, Thorium-227, Thorium-228, Thorium-230, Thorium-231, Thorium-234, Uranium-235, Protactinium-231, Protactinium-234, Potassium-40, Cobalt-60, Cesium-134, Cesium-137, Iodine-131

*Radon Cost includes test device and analysis; $ 5.00 Surcharge for Samples from NJ, FL, and IL for state specific reporting requirements.


47

T E R M S a n d C O N D I T I O N S

TERMS AND CONDITIONS FOR PURCHASE OF LABORATORY SERVICESThe pricing herein is based on, but not limited to the following terms and conditions:1. The Client Chain of Custody documentation shall be considered the client’s formal notice

to proceed with the stated analysis in accordance with the rates and terms herein.2. Turnaround time (TAT) / due dates are based on the lab operational hours. Turn-Around

Time (TAT) is measured in full business days; for example, samples arriving today for 1 Day TAT are due at the end of the next businss day. Samples are date/time stamped and the TAT is tracked during lab operational hours for the particular lab utilized. As such, expedited TAT’s (3 hour, 6 hour) must arrive at the laboratory early enough in the day if same-day results are needed. Contact your local lab for hours of operation and sample delivery times necessary to accommodate expedited TAT requests.

3. Results are available by fax, email, and/or extranet (“LABConnectTM”). Please let the lab know your preferred method for receiving results via directives on your chain-of-custody documentation. Electronic data deliverables (EDD) may be available; contact your account representative for specific information and capabilities.

4. Price discounts may be offered for large volume orders/sample delivery groups if pre-negotiated prior to work submitted AND pre-approved in writing by an authorized EMSL representative. A Client Account Representative is assigned to every account for pricing questions and any customer service needs. If you do not know your account representative, please call our Corporate Office Customer Service Department at 800-220-3675.

5. Reports, chains-of-custody, and invoices are available 24/7 via internet access to our “LABConnectTM” . Please contact your account representative to set up your account for this service, or go to our website (www.emsl.com) and click on the LABConnectTM link.

6. Not all services and/or all tests are offered at every EMSL laboratory location. Please contact your account representative to verify that the local EMSL laboratory you are using provides the services/tests that you require. The client is responsible for confirming the applicability of any local, state, regional, or national certification requirements. All EMSL Accreditations and Certifications are provided on our website. Client is also responsible to confirm individual parameter certifications for each certification.

7. Samples classified as Hazardous or Explosive, or anything that requires special precau-tions when handling must be properly identified, pre-approved by the lab for submittal, and will incur additional surcharges for handling and disposal. EMSL reserves the right to return or refuse acceptance of any sample which, because of its condition or contents at the time of delivery, may be unsuitable for, or may pose risk in, handling or processing for analysis.

8. EMSL standard reporting limits are offered. Surcharges will apply if special reporting limits are required and lab must be notified prior to sample submission.

9. Lab must be notified and approval must be obtained for any special disposal and/or any special sample storage/archive needs of the client; surcharges will apply.

10. If media/supplies are provided as a component of the analytical cost, and the samplesare not submitted to EMSL for analysis within two to three weeks, then the media/supplies will be charged at current list price or a minimum of $1.00 per item whichever is greater, plus shipping and handling charges.

11. Standard overnight shipping (by pre-approved overnight carrier) costs for sample delivery groupings of at least $100 per order are included for lead chips/airs/wipes, asbestos samples (excluding Soil and/or Water samples), or microbiology spore trap or tape lift and/or swab samples. Contact your account representative to coordinate this shipping. Shipping to or from all other divisions and/or tests will be charged accordingly.

12. Standard payment terms are a NET 30 Days from date of lab invoice. Rates are based onUS Dollars. Interest charges will apply to past due payments. If payment remains outstanding after 60 days,EMSL reserves the right to refuse additional work from client, hold or suspend data or data deliverables, and place the client on COD until such time as the account is made current. Client agrees to pay any collection costs incurred to collect past due balances.

13. EMSL warrants to its clients that all services provided hereunder shall be performed in accordance with established and recognized analytical testing procedures and with reasonable care in accordance with applicable federal, state, and local laws.

14. In no event shall EMSL be liable for indirect, special, consequential, or incidental damages, including, but not limited to, damages for loss of profit or goodwill regardless of the negligence (either sole or concurrent) of EMSL and whether EMSL has been informed of the possibility of such damages, arising out of or in connection with EMSL’s services thereunder or the delivery, use, reliance upon or interpretation of test results by client or any third party. We accept no legal responsibility for the purposes for which the client uses the test results. EMSL will not be held responsible for the improper selection of sampling devices even if we supply the device to the user. The user of the sampling device has the sole responsibility to select the proper sampler and sampling conditions to insure that a valid sample is taken for analysis. Any resampling performed will be at the sole discretion of EMSL, the cost of which shall be limited to the reasonable value of the original sample delivery group (SDG) samples. In no event shall EMSL be liable to a client or any third party, whether based upon theories of tort, contract or any other legal or equitable theory, in excess of the amount paid to EMSL by client thereunder.

15. EMSL Standard pricing is periodically adjusted and EMSL reserves the right to update our prices at our sole discretion at any time. EMSL reserves the right to change these rates at any time due to client not complying with payment terms, or for specialty projects which result in sample matrix problems or programs not considered to be our standard testing parameters.

Microbiology Division: a. EMSL provides AIHA Accredited Microbiology services at most locations. Contact your

account representative to verify local accreditation (fungi or bacteria or both) and capabilities.

b. The following standard sampling media is included in the analytical cost:i. tape-lifts and swabs and water collection containers.ii. air impactor agar plates – standard agar plates included (surcharges may apply for specialty media orders).

c. Spore traps are available at client preferred rates and bulk order discounts (see EMSL Products Catalog).

d. Please call for food, consumer products and cosmetics microbiology special products.Industrial Hygiene Division:

a. EMSL provides IH (IAQ) Division Services at three locations, primarily at our NJ Corporate Lab in addition to our Los Alamitos Lab (“LA Testing”) and limited IH Services at our Indianapolis Laboratory. Contact your account representative or Lab Director for local capabilities.

b. Standard media sorbent tubes are included with exception of specially coated media (e.g.: isocyanates, ozone, etc.).

c. Pumps and related equipment may be available as a courtesy to existing clients in good standing on a free loaner basis. Equipment lost, damaged, contaminated or not returned within 5 days will be billed at the replacement cost of the items provided.

d. Shipping to and return of equipment, media, etc., is not included and will be charged.e. Summa canisters and regulators are provided and included in the analytical cost for

TO-15 analysis. If canisters are returned unused, a usage and cleaning certificationfee of $100 per canister will be billed. In addition, shipping costs to and return of the canisters are not included and will be charged.

f. Expanded data packages for validation programs are available for additional costs; lab must be notified prior to the sampling event if this is required.

g. Turnaround times based on business days. Weekend, off-hour, and holiday services may be available with pre-approved scheduling and surcharges.

Lead (Pb) Division: a. EMSL provides Lead (Pb) services at most locations with varying capabilities and

services. Contact your account representative to verify local accreditations and capabilities.

b. The following standard sampling media is included in the analytical cost:ghost wipes with vessel tubes, plastic bottles for lead in drinking water sampling.

c. Lead air cassettes are available, at client preferred rates and bulk order discounts (see Products Catalog)

Environmental Chemistry Division (soil, groundwater, TCLP, RCRA, etc.):a. EMSL provides Environmental Chemistry (NELAC) only at our Corporate NJ Lab. b. Standard glassware, cooler, COC included in the Analysis cost. Standard ground

delivery service shipping to client is included for SDG’s exceeding $250. Expedited shipping surcharges will apply.

c. Pickup of samples at client’s office and/or jobsite may be available, conditional on size of sample delivery grouping, location and times pickup are needed, and good standing status of the client.

d. Special QC data packages for validation programs are available for additional costs. Contact your account representative for fees. Lab must be notified prior to the sampling event if this is required.

e. Client is responsible for confirming the applicability of any local, state, regional, or national certification requirements. All EMSL accreditations and certifications are provided on our website. Client is also responsible to confirm individual parameter certifications for each certification.

f. TAT is based on full business days. Weekend, off-hour, and holiday services may be available with pre-approved scheduling and surcharges.

g. Minimum charge of $50 per job, batch, or sample delivery group (SDG) will apply.h. Samples logged-in and not analyzed charged @ $20.00 per sample.i. Samples cancelled after analysis has begun will be charged for all extraction and

analyses that have been completed at time of cancellation.j. Samples received late into analysis hold-times will be charged @ rush TAT rates

to accommodate hold time restrictions.Asbestos Division:

a. EMSL provides NVLAP accredited asbestos analysis at every lab. b. Asbestos air cassettes (PCM and TEM) are available, at client preferred rates and

bulk order discounts (see Products Catalog)c. Samples prepped but not analyzed due to “positive” stop rules (Gravimetric

Reduction) or overloading (AHERA) will incur a prep charge fee.d. Individual layers (bulk PLM) which will require separate analysis are analyzed,

reported, and charged for each layer.e. Additional analysis requested or changes in analysis protocols must be made via

documented directive to the lab via fax or email.f. Turnaround time based on lab operational hours. Contact your account

representative or lab manager for lab operational hours.Materials Science Division:

a. EMSL provides Materials Science testing primarily at our Corporate NJ Lab. b. All work is at standard TAT of 10 business days unless prior scheduling and lab

approval is coordinated.c. Expedited service may be available – call for costs and information.d. Minimum charge of $100 applies to each order.

Radiological Division (Radon):a. EMSL provides Radiological and Radon Testing at our Corporate NJ Laboratory.b. Test kits are included in the analytical fee.c. Analytical fee and shipping cost billed at time of kit purchase.

Laboratory Testing Since 1981

Co

pyr

igh

t ©

2013

by

EMSL

An

alyt

ical

, In

c.

Prep

ared

by

RPS

.

www.emsl.com

email: [email protected]

EMSL Analytical Locations

Headquarters

EMSL Laboratory Location

EMSL Service Center Location

LA Testing Laboratory Location