Command: _insert Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: 65,40 Command:

“Block”-ul patrulater

Command: _insert Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: x Specify X scale factor: 2 Specify insertion point: 50,80 Command:

Command: _insert Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: s Specify scale factor for XYZ axes: 1.3 Specify insertion point: 50,30 Command:

Command: _insert Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: x Specify X scale factor: 1.5 Specify insertion point: 50,70 Command:

Command: _insert Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: y Specify Y scale factor: 1.5 Specify insertion point: 50,30 Command:

Command: _insert Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: r Specify rotation angle: 45 Specify insertion point: 50,30 Command:

Command: -block Enter block name or [?]: simb-rug Specify insertion base point: 50,40 Select objects: 1 foundSelect objects: 1 found, 2 totalSelect objects: Command:

Command: -attdef Current attribute modes: Invisible=N Constant=N Verify=N Preset=NEnter an option to change [Invisible/Constant/Verify/Preset] <done>: Enter attribute tag name: rug Enter attribute prompt: Valoare Enter default attribute value: Current text style: "Standard" Text height: 2.5Specify start point of text or [Justify/Style]: 24,75 Specify height <2.5000>: 10 Specify rotation angle of text <0>: Command:

Command: -attedit Edit attributes one at a time? [Yes/No] <Y>: Enter block name specification <*>: Enter attribute tag specification <*>: Enter attribute value specification <*>: Select Attributes: 1 foundSelect Attributes: 1 attributes selected.Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: v Enter type of value modification [Change/Replace] <R>: Enter new attribute value: Ra6,3 Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: Command:

Command: -attedit Edit attributes one at a time? [Yes/No] <Y>: Enter block name specification <*>: Enter attribute tag specification <*>: Enter attribute value specification <*>: Select Attributes: 1 foundSelect Attributes: 1 attributes selected.Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: s Enter new text style <Standard>: A2008 Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: c Enter new color name or value <BYLAYER>: 5 Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: Command:

Command: -attedit Edit attributes one at a time? [Yes/No] <Y>: Enter block name specification <*>: Enter attribute tag specification <*>: Enter attribute value specification <*>: Select Attributes: 1 foundSelect Attributes: 1 attributes selected.Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: p Specify new text insertion point <no change>: @-20,0 Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: Command:

Command: -attedit Edit attributes one at a time? [Yes/No] <Y>: Enter block name specification <*>: Enter attribute tag specification <*>: Enter attribute value specification <*>: Select Attributes: 1 foundSelect Attributes: 1 attributes selected.Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: a Specify new rotation angle <180>: 0

Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: p Specify new text insertion point <no change>: 55,30 Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: Command:

Command: -attdef Current attribute modes: Invisible=N Constant=N Verify=N Preset=N Lock position=YEnter an option to change [Invisible/Constant/Verify/Preset/Lock position] <done>: Enter attribute tag name: Des Enter attribute prompt: Desenat Enter default attribute value:Current text style: "A508" Text height: 5.0000Specify start point of text or [Justify/Style]: 2,1 Specify rotation angle of text <0>: Command:

Command: -ATTDEFCurrent attribute modes: Invisible=N Constant=N Verify=N Preset=N Lock position=YEnter an option to change [Invisible/Constant/Verify/Preset/Lock position] <done>: Enter attribute tag name: Data Enter attribute prompt: Finalzare Enter default attribute value: Current text style: "A508" Text height: 5.0000Specify start point of text or [Justify/Style]: 67,1 Specify rotation angle of text <0>: Command:

Command:-ATTDEFCurrent attribute modes: Invisible=N Constant=N Verify=N Preset=N Lock position=YEnter an option to change [Invisible/Constant/Verify/Preset/Lock position] <done>: Enter attribute tag name: Ver Enter attribute prompt: Verificat Enter default attribute value: Current text style: "A508" Text height: 5.0000Specify start point of text or [Justify/Style]: 107,1 Specify rotation angle of text <0>: Command:

Command: -block Enter block name or [?]: indic Specify insertion base point: 170,0 Select objects: w Specify first corner: -5,-5 Specify opposite corner: 175,15 9 foundSelect objects: Command:Command: -insert Enter block name or [?] <Indicator>: indic Units: Millimeters Conversion: 1.0000 Specify insertion point or [Basepoint/Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: 170,0 Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter Y scale factor <use X scale factor>: Specify rotation angle <0>: Enter attribute valuesVerificat: Popescu Nicolae Finalizare: 20.03.2006 Desenat: Pop Gheorghe Command:

Command: m MOVESelect objects: 1 foundSelect objects:

Command: m MOVESelect objects: 1 foundSelect objects: Specify base point or [Displacement] <Displacement>: end of Specify second point or <use first point as displacement>: cen of

Command: m MOVESelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>: Specify displacement <80.0000, 40.0000, 0.0000>: 120,50 Command:

Command: m MOVESelect objects: 1 foundSelect objects: Specify base point or [Displacement] <Displacement>: cen of Specify second point or <use first point as displacement>: @0,-40 Command:

Command: ro ROTATECurrent positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0Select objects: 1 foundSelect objects: Specify base point: 80,60 Specify rotation angle or [Copy/Reference] <45>: 60 Command:

Command: _stretch Select objects to stretch by crossing-window or crossing-polygon...Select objects: c Specify first corner: Specify opposite corner: 1 foundSelect objects: Specify base point or [Displacement] <Displacement>: x,y Specify second point or <use first point as displacement>: @20,0 Command:

Command: _scale Select objects: 1 foundSelect objects: Specify base point: end Of [varful din stanga jos] Specify scale factor or [Copy/Reference] <1.0000>: 1.5 Command:

Command: _scale Select objects: 1 foundSelect objects: Specify base point: 0,0 Specify scale factor or [Copy/Reference] <1.0000>: 1.5 Command:

Command: _dimlinear

Specify first extension line origin or <select object>:

Specify second extension line origin:

Specify dimension line location or x,y

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:

Dimension text = 80

Command: _dimlinear

Specify first extension line origin or <select object>:

Specify second extension line origin:

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:

Dimension text = 40

Command:

Command: _dimlinear

Specify first extension line origin or <select object>:

Specify second extension line origin:

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: T

Enter dimension text <40>: 39

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:

Dimension text = 40

Command:

Command: _dimlinear

Specify first extension line origin or <select object>:

Specify second extension line origin:

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: A

Specify angle of dimension text: 30

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: x,y

Dimension text = 80

Command:

Command: _dimlinear

Specify first extension line origin or <select object>:

Specify second extension line origin:

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: R

Specify angle of dimension line <0>: 30

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: x,y

Dimension text = 69.28

Command:

Command: _dimaligned

Specify first extension line origin or <select object>:

Specify second extension line origin:

Specify dimension line location or

[Mtext/Text/Angle]:

Dimension text = 47.02

Command:

Command: _dimlinear

Specify first extension line origin or <select object>:

Select object to dimension:

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: x,y

Dimension text = 70

Command:

Command: _dimdiameter

Select arc or circle:

Dimension text = 40

Specify dimension line location or [Mtext/Text/Angle]: x1,y1

Command: _dimradius

Select arc or circle:

Dimension text = 20

Specify dimension line location or [Mtext/Text/Angle]: x2,y2

Command:

Command: _dimangular

Select arc, circle, line, or <specify vertex>:

Select second line:

Specify dimension arc line location or [Mtext/Text/Angle]: x,y

Dimension text = 34

Command:

Command: _dimlinear Specify first extension line origin or <select object>:Specify second extension line origin: Specify dimension line location or[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: x,y Dimension text = 70Command:

Command: _dimedit Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>: N Select objects: 1 foundSelect objects: Command:

Command: _dimtedit Select Dimension: Specify new location for dimension text or [Left/Right/Center/Home/Angle]: x,y Command:

Command: _dimedit Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>: O Select objects: 1 foundSelect objects: Enter obliquing angle (press ENTER for none): -60 Command: