View
3
Download
0
Embed Size (px)
DESCRIPTION
Instalacion de matrix
Citation preview
2013 Comba Telecom. All rights reserved Information contained in this document is subject to confirmation at time of ordering. Specifications may differ depending on region and customers requirements. All rights reserved. DS-Control: 1-0-0 / 1113
Page 1 of 2
5GHz Wi-Fi AP/CPE/PTP Comba AP8520 802.11a/n 5.15 ~ 5.825GHz 29dBm MIMO
The Comba AP8520 can be used as standard Wi-Fi AP/CPE or PTP (Point to Point) link. Comba AP8520 supports advanced 802.11n standard and 2x2 MIMO which gives maximum 300Mbps data rate. With its high transmit power and intergrated high gain directional panel antenna, it can provide 3-4 times coverage of normal AP or extends the coverage in the same way as CPE. AP8520 can be an very cost-effective PTP link solution which support 12km maximum link distance. It is designed to be installed in both indoor and outdoor environment. It supports pole/wall mounted or simply just put on desktop with an optional stand. AP8210 is powered by PoE (Power over Etherenet) and only a Etherent cable is required to provide both power and data connectivity. With its light-weighted and one-piece design, the installation is simple and easy.
Product Features
Features built-in for carriers including per client / VAP based bandwidth control, remote web-based management and client association status
45 dual slant patch antennas are optimized to match with the Comba antennas. It provides 3 dB more gain as compared to other V/H polarized CPEs
High performance antenna with 20 dB front-to-back ratio, which is on average 5 dB better than others in directional transmission without picking up unwanted signal
One-piece weatherproof chassis compliant to IP55 standard for direct outdoor installation
8-level LED for easy alignment in the strongest signal direction
Key Characteristics
Large Coverage Access Point Comba AP8210 has high transmit power 29dBm combined and high gain internal panel antenna 14dBi. Totally, Comba AP8520 has at least 18dB link budget improvement compared with normal AP which means 3-4 times of coverage increase. Typlically, it can provide 250m LOS (Light of Sight) coverage. Cost-effective PTP Link With high gain integrated antenna and one-piece desugn for outdoor and indoor installation, Comba AP8520 can be a cost-effective PTP (point-to-point) link with distance up to 12km and throughput up to 100Mbps. It fits the deployment of commercial wireless broadband users or high definition surveilance cameras. Indoor and Outdoor Installation With Ingress Protection level of IP55 and operting temperature -20 C to +55 C, it is suitable for outdoor usage. The enclosure of AP8520 is outdoor UV stabilized plastic which is designed to install under sunlight for years. AP8520 is also designed for easy indoor wall mounted or desktop installation.
PTP 12km LOS
Standard Wi-Fi Access 250m LOS
AP8520 AP8520
PoE
Ethernet Cable
Ethernet Cable
PoE
Point to point: 12km LOS AP8520 AP8520
Standard Access: 250m LOS
2013 Comba Telecom. All rights reserved Information contained in this document is subject to confirmation at time of ordering. Specifications may differ depending on region and customers requirements. All rights reserved. DS-Control: 1-0-0 / 1113
Page 2 of 2
Technical Specifications
Wireless
Wireless Technology IEEE 802.11a/n, 2x2 MIMO
Frequency Band 5.15 ~ 5.825GHz
Max. Transmit Power 29dBm (combined)
Modulation Schemes CCK, OFDM, DSSS-OFDM
Receive Sensitivity
802.11a 54Mbps: -83dBm
6Mbps: -96dBm
802.11n HT20: -95dBm
HT40: -91dBm
Antenna
Built-in Antenna Gain 14dBi
3-dB H-Beamwidth 35-45
3-dB V-Beamwidth 15-20
Front-to-back Ratio -20dB (Max.)
Network
Physical Interface 10/100BaseT (PoE)
VLAN
SSID / VLAN mapping
Management VLAN
VLAN Trunk SSID
Networking
DHCP Server
DHCP Client (WAN interface)
NAT Server
Port Forwarding
SSID Max. 8 SSID/VAP
Physical
Dimensions 220 x 80 x 24 mm
Weight 0.4kg (excluding mounting)
Power Supply PoE Injector (18V)
Power Consumption 6W (Typical) / 8W (Max.)
Environmental
Operating Temp. -20 C to +55 C
Humidity 5 to 95% (Non-condensing)
Ingress Protection IP55
Standard
Protocol IEEE 802.11a/n
IEEE 802.11e WMM
Security and Authentication
Security and
Authentication
Authentication Open, Shared
Key, WPA/WPA2-PSK, 802.1x
(EAP-TLS/TTLS.SIM/AKA,
PEAP)
Encryption WEP, TKIP, AES
WAPI
MAC based access control list
(white/black)
SSID suppression
Management
Management
Web-based administration tool
Web-based antenna alignment
tool
Remote firmware upgrade
SNMP v2c
Application
Deployment Scenario
5GHz point to point link Outdoor 5GHz AP for wireless broadband
access CPE to extends coverage distance for wireless
internet service provider 5GHz PTP link
Appearance
Antenna Pattern
Product Order Information
Model Number Description
AP8520
AP8528 5GHz AP/CPE/ PTP Link
(PoE adapter and power supply
included)
Built-in
Antenna LED