Upload
phamdat
View
236
Download
2
Embed Size (px)
Citation preview
COLLEGE ARCHIVES
MC 40
JAMES S. REED
Acquisition: 1999
Processed: JL & EG
James Stalford Reed
(1938 – date)
Born: 1938, June 7
Married: Carol
Children:
Parents:
EDUCATION
1960 B.S. Ceramic Technology, Penn State University. Thesis: The formation of spinel and
order-disorder phenomena in spinel, MgAl2O4. [QE391.S68.RA 1960] Advisor G. W.
Brindley
Fall 1960 Carnegie Institute of Technology. Metallurgy
1965 Ph.D. Ceramic Science, Alfred University. Thesis: An Investigation of the Constitution of
Transition Metal Ions in a Spinel Matrix. [TP2.N36 1965 No.4] Advisor T. J. Gray
WORK/TEACHING
1965- Assistant Professor, Ceramic Engineering, NYSCollege of Ceramics at AU
1970-1971 Visiting Professor, University of California at Berkeley
1977 Visiting Professor, Ecole Nationale Superieure de Chemie, Paris, France
1978-1999 Professor, NYS College of Ceramics at AU
1997-1999 Dean, Ceramic Engineering and Materials Sciences, NYSCC at AU
HONORS/SOCIETIES:
1978 SUNY Chancellor’s Award for Excellence in Teaching
Danforth Associate at Alfred University
American Ceramic Society, fellow & member
National Institute of Ceramic Engineers
Phi Kappa Phi
Keramos
American Men of Science
PUBLICATIONS:
“Infrared spectral investigation of polyacrylate adsorption on alumina,” with D. H. Lee and R. A.,
Condrate, in Journal of Materials Science, Vol. 31, No. 2, 1996, pp.471-478.
“Mechanics of extrusion” with T. J. Martin and W. G Carlson in Science of whitewares.
Proceedings of the science of whiteware conference, 1995. Edited by Victoria E. Henkes,
George Y. Onoda and William Carty. Westerville, OH: American Ceramic Society, 1996
“Critical flaws in sintered compacts of alumina granules,” with D. Doshi, in Ceramic
Engineering and Science Proceedings, Vol. 16, No. 5, 1995, pp. 939-948.
“Polyethylene glycol binders for advanced ceramics,” with W. J. Walker and S. K. Verma, in
“Ceramic Engineering and Science Proceedings, Vol. 14, No. 11-12, 1993, pp. 58-79.
“Green testing of pressed compacts,” with W. J. Walker, in Ceramic Engineering and Science
Proceedings, Vol.14, no. 11-12, 1993, pp. 43-57.
“Effects of particle packing characteristics on solid-state sintering” with Jingmin Zheng, in
Journal of the American Ceramic Society, Vol. 72, No. 5, 1989, pp 810-917.
“Specific permeability of porous compacts as described by a capillary model,” with S. J.
Lukasiewicz, in Journal of the American Ceramic Society,Vol. 71, No. 1, 1988, pp. 1008-
1014.
“Particle and granule parameters affecting compaction efficiency in dry pressing,” with Jingmin
Zheng, in Journal of the American Ceramic Society, Vol. 71, No. 1, 1988 C-456-458.
“Critical issues and future directions in powder forming processes,” in Ceramic Transactions,
Vol I., pp 601-610, 1988.
“Packing density of alumina blends for substrates evaluated from pressure filtered-pressed
compacts,” with D. V. Miller, in Ceramic Transactions, Vol I., pp 733-740, 1988.
“The effect of granule size on green strength distributions of dry pressed alumina compacts,”
with B. D. Mosser III and J. Warner, in Ceramic Transactions, Vol. I, pp. 767-755, 1988.
“Phase development on reacting phosphoric acid with various Bayer-process aluminas,” with S.
Lukasiewicz, in American Ceramic Society Bulletin, Vol. 66, No. 6, 1987, pp. 1134-1138.
Principles of ceramics processing. New York: Wiley, 1994. Rev. ed. of: Introduction to the
principles of ceramic processing. 1987.
An introduction to physical ceramics: CES 407, fall semester, 1987. Prepared as curriculum
materials for a course taught at the New York State College of Ceramics at Alfred
University.
“A novel technique for producing a glass-ceramic bond in alumina abrasives,” in American
Ceramic Society Bulletin, Vol. 65, No. 11, 1986, pp. 1506-1512.
“Kinetic processes involved in the sintering and crystallization of glass powders” with Terence J.
Clark, in Journal of the American Ceramic Society, Vol. 69, No. 11, 1986, pp. 837-846.
Processing consequences of raw materials variables: Proceedings of 1982 Alfred Whitewares
Conference. Edited with James R. Varner, James E. Funk, and Paul F. Johnson. Alfred, NY:
Division of Ceramic Engineering and Science, NYSCC at AU, 1985
“Magnetic properties of press-forged barium ferrite,” with S. Dey, in American Ceramic Society
Bulletin, Vol. 64, No. 4, 1985, pp. 571-574
“Dependence of compaction on the glass transition temperature of the binder phase,” with Robert
A. DiMilia, in American Ceramic Society Bulletin, Vol.62, No. 4, 1983, pp. 484-488.
“Boundary conditions in electrical porcelain extrusion,” with D. Price, in American Ceramic
Society Bulletin, Vol. 62, No. 12, 1983, pp. 1348-1350.
“Stress transmission during the compaction of a spray-dried alumina powder in a steel die,” with
Robert A. DiMilia, in Journal of the American Ceramic Society, Vol. 66, No. 9, 1983, pp.
667-672.
“Dependence of compaction on the glass transition temperature of the binder phase,” with
Robert A. DiMilia, in American Ceramic Society Bulletin, Vol. 62, No. 4, 1983, pp. 484-
488.
Technical innovations in whitewares. Proceedings of 1981 Alfred Whitewares Conference.
Edited with James E. Funk, Paul F. Johnson, and James R. Varner. 1982, Alfred, NY: Alfred
University Press, 1982
“Effect of relative humidity on the compaction of barium titanate and manganese zinc ferrite
agglomerates containing polyvinyl alcohol,” with J. Anthony Brewer and Roger H. Moore,
in American Ceramic Society Bulletin, Vol. 60, No. 2, 1981, pp. 212-215, ?
“Microstructures and properties of permeable mold materials” with Ward E. Votava and Louis
M. Holleran, in American Ceramic Society Bulletin, Vol 58, No. 2, 1979, pp 194-197
“Extrusion behavior and microstructure development in alumina” with Angelo L. Salamone, in
American Ceramic Society Bulletin, Vol. 58, No. 12, 1979, pp 1175-1178
“Analysis of Cl- ions laundered from submicron zirconia powders” with Curtis E. Scott, in
American Ceramic Society Bulletin, Vol 57, No. 8, 1978, pp 741-743
“Dependence of sintering response with a constant rate of heating on processing-related pore
distributions” with Thomas J. Carbone, in American Ceramic Society Bulletin, Vol. 57, No.
8, 1978, pp.748-751.
“Character and compaction response of spray-dried agglomerates,” with Stanley J. Lukasiewicz,
in American Ceramic Society Bulletin, Vol. 57, No. 9, 1978, pp. 798-802.
“Powder Compaction” in Bi-monthly reports, New York State College of Ceramics at AU. Vol.1
(1977)
“Elastic moduli of refractory spinels,” with D. F. Porter and David Lewis, III, in Journal of the
American Ceramic Society, Vol. 60, No.7-8, 1977, pp. 345-349.
“Fabrication and flexural strength of ultrafine-grained yttria-stabilized zirconia,” with Paul H.
Rieth and A. Wayne Naumann, in American Ceramic Society Bulletin, Vol.55, No. 8, 1976,
pp. 717-721, 727.
“Dry pressing” with Robert B. Runk, in Ceramic fabrication processes, edited by Franklin F. Y.
Wang. New York: Academic Press, 1976
Ceramic engineering and science: emerging priorities. Edited with V. D. Frechette, and L. D.
Pye. New York: Plenum Press, 1974
“Mechanics of pressure slip casting,” with Terrence J. Fennelly, in Journal of the American
Ceramic Society, Vol. 55, No. 5, 1972, pp. 264-268.
“Optical absorption spectra of Cr3+ in MgO-Al2O3-MgO-3.5Al2O3 spinels,” in Journal of the
American Ceramic Society,” Vol. 54, No.4, 1971, pp. 202-204.
“Combustion for firing ceramics” in Firing Ceramics edited George A. Kirkendale. Alfred, NY:
NYSCC at AU, 1968
Advisor for:
Thesis (B.S.)
Ackart, Garrick W. Granulation of fine powders and the affect [sic] on flowability. 1997
Ackley, George A. Effect of plasticizer on the compaction behavior of spray granulated powders.
1980
Arnold, Terry Eugene. A study of the vibratory compaction of alumina utilizing the concept of
packing factor. 1968
Baron, Kenneth I. Thermal expansion and strength characteristics of LiAl34.6 SiOdified by
additions [sic] of P5and Al3. 1974
Basher, George Paul. Determination of viscosities and softening points in glasses and glazes.
1969
Bauer, Lawrence R. The investigation of impurities on stabilized zirconia. 1973
Bauer, Pamela J. Thermal expansion and chemical durability of phosphate glasses. 1981
Block, David James. A study of the effects of particle size variation on the filtration test
parameters and the stress-strain behavior of alumina bodies. 1969
Brewer, James Anthony. Compaction and green strength spray dried alumina and silicon
carbide. 1976
Brigham, Kristin. Determination of Gruneisen’s ratio for selected ceramic oxides. 1967
Brinckerhoff, Nate. Cordierite kiln furniture prepared from combinations of unfired materials
and prereacted materials. 1997
Brow, Rhonda. Low fire phosphate frit glazes. 1982
Brown, Thomas Joseph. The effect of varying frits on a permeable ceramic mold material. 1967
Burdette, Charles Kenneth, Jr. Utilization of the packing factor in studying the vibratory
compaction of ceramic materials. 1967
Burleigh, Jeanni R. Centrifugal casting for microscale processing. 1992
Burns, Gregory S. The formation and densification of cordierite. 1987
Busch, Trent D. The effects of Weibull moduli from sintering stages of Al203. 1993
Canfield, Nathan L. Lot to lot variation of Bikowski CR-30 alumina. 1997
Casciano, Richard Allen. An investigation of particle size distributions of alumina after
reduction by fluid energy milling. 1969
Castello, Carol J. Development of a wollastanite glaze for a wollastonite body. 1983
Chayka, Paul V. Reduction of maturation temperature for a whiteware body. 1981
Chrzan, David Stanley. An investigation of particle size distribution through the parameters of
ball milling aluminia. 1967
Cline, James. Sintering and forging of fly ash. 1978
Competti, Virginia Ann. The effect of powder particle size and firing temperature on the
sintering of yttria stabilized zirconia. 1978
Cooley, Richard Frank. Distribution of cations in aluminate spinels. 1970
Dam, Philip T. Thermal shock resistance of yttria partially stabilized zirconia. 1979
Davis, Dennis F. The effect of impurities on the grain growth of Bao-5-Fe3. 1974
Dichiara, Robert A., Jr. Particle size distribution and rheology of Alcoa alumina. 1981
Dillon, Gregory Paul. The development of a test for evaluating the effects of friction at the
interface between a plastic ceramic body and a metal die. 1990
Dowdle, Douglas Cloyse. An investigation of the heats of transitions using the differential
scanning calorimeter. 1970
Fattey, John D. The composition effect on the sintering behavior, sawing rate, and flexure
strength of yttria stabilized zirconia 6.5 m/o and 3.8 m/o mixtures. 1978
Feather, David Hoover. Rehabilitation of the verneuil furnace and the growth of selected spinels.
1968
Ferris, Emily A. Quartz-free, high strength porcelain body. 1985
Fleming, Mary M. The effects of particle size distribution and the presence of a glassy phase on
the sintering behavior of fine-powdered alumina. 1985
French, Charles Howard. The direct shear testing of alumina powder. 1972
Gallagher, Richard James. Analysis of the packing behavior of mullite. 1969
Ganung, James R. and Quinn, Barry F. A study of stress – Strain behavior in various clay bodies
with attempted correlation to West’s filtration tests. 1968
Glassmire, Cathleen M. The effects of hydrothermal treatment on the production of cordierite.
1986.
Graham, Julie A. Centrifugal casting of alumina slurries. 1994
Heinz, Merrill Robert. Flow patterns and stress distribution during ram pressing. 1968
Herring, Carl. Sintering and hot forging a novel whiteware body. 1981
Higby, Paige L. Dependence of flow and pressing properties of spray granulated A-16 alumina
on amount and type of additive and agglomerating liquid. 1982
Hill, Joseph W. Sintering at subnormal temperatures. 1976
Hirji, Nasiruddin Roshanally. Slag attack on basic refractories. 1972
Hoaglund, Nancy E. Direct granulation of ceramic powders. 1982
Horsley, James M. The microwave drying behavior of extruded alumina and a pH study of
bismuth superconductors. 1988
Incorvati, Cynthia Marie. The effect of surface impurity on dispersion and binder adsorption in
aqueous alumina suspensions. 1994
Jewart, Charles N., Jr. A study of lattice parameters in spinel solid solutions. 1972
Kelly, William. The investigation of improving an isostatically pressed SiOdy. 1972
King, Martin A. Characterization and refinement of a low firing whiteware body. 1982
Komar, Andrew V. Compaction of alumina granules containing PVA and gum Arabic. 1984
Kutbay, Cihat. Lithospar use in talc containing whitehware bodies. 1982
Kuzoch, Alicja M. The effects of a lubricant on plasticity, green strength and density of
whitewares. 1983
Lagan, C. J. An engineering study of the re-use of cordierite scrap as industrial kiln. 1995
Lang, Adam Kevin. The change in Weibull modulus with densification from sintering. 1992
Leonardi, Nicholas A. The effects of binder molecular weight on the pressure slip casting rates
of alumina. 1979
Loveland, Elizabeth, Ahl, Michael, and Cawley, James D. Effects of flocculation and
deflocculation on the drying rate of aqueous slurries of zircon. 1978
Lucas, Jeff. A study of the affects [sic] that firing temperature and pressing pressure have on the
properties of post fired [sic] scrap corderite [sic]. 1996
Marquit, Robert J. Developing unique ceramic mold material. 1981
Mathers, James Patrick. An investigation of the mechanical properties and thermal shock
resistance of zirconia fiber reinforced composites. 1970
Merchant, Stanley Richard. Modulus of elasticity and modulus of rupture of fused cast alumina
at elevated temperatures. 1967
Miller, David V. Extrusion of alumina using various molecular weight binders and binder
content. 1984
Moniot, Mark. Liquid phase assisted sintering of alumina using a crystallizing glass frit. 1987
Moore, Roger H. Sintering ceramics at subconventional temperatures. 1976
Morrow, Michael A. Characterization of collected dust particles from a manufacturing facility.
1997
Mroz, Thomas J. Factors affecting final density in an ultra-fine grained transformation
toughened zirconia. 1986
Munroe, Anthony Bruce. Investigation of a permeable ceramic mold body. 1969
Near, James M. Fast fire wall tile bodies utilizing wollastonite. 1983
Padden, Sheila A. Factors influencing the processing and microstructure of a zinc oxide varistor.
1987
Pasco, Wayne David. Thermal expansion characteristics of LiAl3.6SiOdified with Al3nd P5.
1973
Ploetz, Kristin Lisa. An analysis of the effect of white machining on the strength and dimensional
control of sintered alumina. 1993
Pokrzyk, Jay. Dilametric analysis of initial sintering characteristics of barium titanate. 1980
Pollak, Thomas M. Fabrication of a low fired whiteware through liquid phase sintering. 1974
Price, David B. High porosity SiC-Fiberfrax composite. 1978
Probst, Andrew B. The effect of porosity on flexure strength of 6 w/o yttria stabilized zirconia.
1980
Pryll, Sheldon M. Strength and thermal shock behavior of recycled waste cordierite. 1994
Raguso, Joseph A. The effect of processing variables on the sintering and crystallization of
stoichiometric cordierite. 1987
Roberts, Thomas Richard. An evaluation of a static mixing system for ceramic applications. 1970
Royston, Susan. Thermal expansion and chemical durability of phosphate glasses. 1980
Schillbach, Arlene. Strength developments in zirconia doped alumina and an investigation of
processing defects in chromia doped alumia. 1988
Schilling, Allan D. Characterization and determination of color disorder in 93% alumina
composition. 1986
Schuster, Peter A. Dimetral compression strength of vitrified bonded abrasives with various
aspect ratios and grain size. 1983
Schwabel, Gerald Joseph. The effect of frit concentration upon a dry pressed ceramic die
material. 1969
Schwabel, Mark George. High temperature Young’s modulus of stoicheiometric magnesium-
aluminate spinels. 1973
Sedore, Robert George. The effect of varying material composition and silica gel content on the
properties of a permeable mold material. 1968
Sites, Royal Halsey. A study of the conditions under which a high alumina body can be plastic
pressed. 1967
Smart, Linda P. Hot Forging at subnormal temperatures. 1979
Smith Nathan M. Compaction of silicon carbine granules containing PVA, PEG, and acrylic
binders. 1996
Smith, David N. Dependence of flow rate and packing of agglomerated powders on the shape
and size distribution of the agglomerates. 1981
Thorsland, Brett N. Relationship between particle packing and sintered density utilizing coarse
and fine grain alumina powders. 1995
Topping, Glenn R. Aluminun-phosphate [sic] bonding of refractory materials. 1962
Trautlein, David W. Thermal shock resistance. 1979
Tunnicliff, Jeffrey S. Effects of centrifuging on the casting behavior of an alumina slurry. 1991
Walker, John C. Effects of binder solution composition and content on the mixing, extrusion, and
subsequent properties of agglomerated and non-agglomerated alumina powders. 1989.
Zaun, Raymond B. Pressing properties of a nepheline syenite spray granulated body vs a
nepheline syenite spray dried body. 1983
Thesis (M.S.)
Ackley, George A. Plastic yield strength determined using the direct shear test, and extrusion
behavior of an electrical porcelain. 1982
Brewer, James Anthony. Compaction response of agglomerated powders - during isostatic
pressing. 1979
Carbone, Thomas Joseph. Dilatometric analysis of sintering behavior of zirconia and barium
titanate. 1976
Clark, Terence J. Closed die hot forging of vitrified bonded abrasives. 1980
Corbett, Daniel Wayne. Hot forging strontium ferrite permanent magnets. 1977
Croft, Thomas David. Mixing of ceramic suspensions and extrudable bodies. 1974
Dey, Sandwip Kumar. The effects of aspect ratio on the magnetic properties of pressed forged
barium ferrite permanent magnets. 1980
Dillon, Gregory P. Analysis of the effects of sodium stearate on the extrusion behavior of a
cordierite body. 1993
DiMilia, Robert A. Hot forging of barium titanate in the presence of a liquid phase. 1979
Fennelly, Terence John. A story of the mechanics of pressure slip casting alumia. 1970
Holleran, Louis Michael. The development of sintered ceramic molds for automatic jiggering.
1969
Huynh, Truc-Chi Thi. Phase composition of yttria partially-stablilized zirconia. 1978
Kerr, Mary C. An analysis of parameters affecting grinding rate and powder contamination
during attrition milling. 1988
Klug, Frederic J. Fabrication and magnetic properties of polycrystalline SrO.6Fe3. 1974
Lukasiewivz, Stanley John. Compaction of agglomerated and bulky ceramics powders. 1976
Martin, Tom. Electrical porcelain extrusion: analysis of effects due to reprocessed material
additions and liquid content variations. 1991
Miller, David V. Sintering behavior of alumina blends for substrates. 1986
Moore, Roger J. The dependence of compaction in a metal die on the character of egglomerated
feed powder.1979
Mosser, Benjamin D., III. Processing steps to eliminate green and fired defects in dry pressed
alumina substrates. 1987
Padden, Sheila A. Attrition milling: variables affecting grinding kinetics and powder
contamination. 1989
Pasco, Wayne David. Fabrication and sintering of boron-carbon doped beta silicon carbide.
1976.
Porter, Richard Lawrence. Crystallographic modifications of manganese dioxide. 1973
Price, David B. Filter cake development, extrusion behavior, and plastic property measurement
of a quartz electrical porcelain body. 1981
Rieth, Paul Hermann. Processing of ultrafine yttria stabilized zirconia. 1973
Sainamthip, Prinya. Fast fired tile bodies containing wollastonite. 1984
Salamone, Angelo L. Extrusion behavior and microstructure development in sintered alumina.
1978
Scott, Curtis Edward. Sintering and mechanical properties of strontium zirconate. 1974
Shashidhar, N. Development of a process for recycling porcelain scrap. 1987
Ten Eyck, John D. Flourine treatments of glass surfaces. 1977
Votava, Ward E. Preparation and analysis of unfired compacts using the scanning electron
microscope. 1980
Walker, William J., Jr. Polyethylene glycol binders for advanced ceramic processing. 1992
Zheng, Jingmin. Effects of green packing characteristics on solid state sintering. 1988
Thesis (Ph.D.)
Arrasmith, Steven R. Incipient flocculation molding – a new ceramic forming technique. 1998
Clark, Terence J. Preparation of glass ceramic bonds by the sintering and crystallization of glass
powder. 1984
DiMilia, Robert Anthony. Compaction study of spray-dried alumina agglomerates. 1981
Doshi, Dilip. Binder coagulation casting: a novel ceramic forming process.1999
Fleming, Mary M. The effects of particle size distribution and the presence of a glassy phase on
the sintering behavior of fine-powdered alumina. 1985
Locker, Robert John. The internal friction and ultimate shear strength of aqueous alumina-
methylcellulose systems. 1986
Lukasiewicz, Stanley John. Strength and permeability of phosphate bonded, fine grained
aluminas. 1984
Walker, William J., Jr. Powder compaction: processing to optimize the granule characteristics
for advanced ceramics. 1996
Wight, John Forrest, Jr. The extrusion of ceramics. 1996
PATENTS:
“Novel Witheware Body and Energy Efficient Processes for Same.” U.S.Patent 4,212,924, July
15, 1980.
“Incipient Flocculation Molding of Particulate Inorganic Materials.” U.S.Patent 5,908,588, June
1, 1999. With Syamal K. Ghosh, Dilip K. Chatterjee, Steven R. Arrasmith.
SERIES DESCRIPTION
Office files with course outlines and work. Includes student papers and correspondence.
Box 1
Correspondence. 1987-1999.
BCC (Binder Coagulation Casting) Reports – William J. Walker, 1997
Papers:
“Sintered permeable ceramic molds,” with L. M. Holleran.
“Pressure drop of extrusion in a square entry die,” with Jingmin Zheng and William B.
Carlson, 1991.
“Driving force and retarding of densification in solid state sintering,” with Jingmin Zheng
and Paul F. Johnson, 1990.
“Preliminary results for PVA adsorption on A16 SG amd A30 aluminas (Alcoa
Confidential), 1991.
“Progress Report” with R. L. DeRosa and J. Trapasso, 1999. Submitted to the Polymer-
Assisted Ceramic Manufacturing Research Center.
“FTIR spectral investigation of alumina surfaces and polyacrylate adsorption on them,” with
D. H. Lee and R. A. Condrate.
“Influence of slurry parameters on granule chateristics,” with William J. Walker and
Surendra K. Verma.
Eastman Kodak Research (including patent)
“Spray dried granules for pressing”
“Pressing”
Proposals
Courses:
CES 303 – Physical Ceramics
CES 306 – Operational Techniques
CES 327 – High Temperature Reaction Processes
CES 509 – Ceramic Frabrication Process
CES 510 – Ceramic Fabrication Process.
CES 515 – Research Seminar
CES 593 –
Short Course: Principles of plasticity and extrusion, 1993
Short Course: Forming Ceramics By Powder Pressing: Principles, Technology, and Quality,
1996
Student Papers:
Axelson, Scott. M.S. 1988. "Reaction-Bonded Silicon Nitride: a Chemical Method of
Preparation," 1986 - CES 509
Bihuniak, Peter. Ph.D. 1997. "Viscous Flow Sintering, "1976 - CES 510
Carnahan, Gary. M.S. 1993. "Gelation Reactions in Aqueous Polymer Solutions," 1991 – CES
510
Chakraborty, Indra. Ph.D. 1984. "Liquid Phase Sintering," – CES 510
Chatfield, Lawrence. B.S. 1991."Cavitation Phenomenon: Theory and Optimization of Particle
Dispersion," 1992 – CES 510
Corah, Chip. M.S. 1991. "Preparation of Ceramic Powders Using Emulsion Techniques,” 1986 –
CES 509
Dillon, Gregory. M.S. 1993. "The Adsorption of Organic Processing Additives in Oxide/
Aqueous Systems and Their Role in Modifying Interparticle Forces." – Independent Study
Dillon, Gregory. M.S. 1993. "The Use of Cylindrical Internal Reflectance FTIR to to
Characterize Interfaces in Acqueous Processing Systems," 1991 – CES 510
Dinger, Bruce. M.S. 1984. "Rheology and Stability of Clay-Water Systems," 1982 – CES 510
Doshi, Dilip. Ph.D. 1999. "Low Pressure Injection Molding: A Cost Effective Method for
Complex and Near-Net Shape Formation of Ceramics," 1992
Doshi, Dilip. Ph.D. 1999. "Research Report," 1992
Fleming, Mary. B.S. 1985. "Sintering in the Presence of a Liquid," 1985 – Independent Study
Glassmire, Cathleen. M.S. 1989. "A Review of the Processing of Alpha and Beta Silicon
Carbide," 1986
Gressler, Carole. M.S. 1988. "Nonconventional Methods of Preparation of Ceramic Powders,"
1986 – CES 509
Hexemer, Richard. M.S. 1988. "Preparation and Sintering of Alumina Gels Derived from
Pseudoboehmite"
Huffsmith, Sarah. B.S. 1989. "Hot Pressing of Ceramics," 1978 – CES 510
Jain, Alka. M.S. 1989. "Effect of Powder Characteristics on the Microstructure," 1986 – CES
509
Joseph, Innocent. Ph.D. 1985. "Sintering in the Presence of a Liquid Phase," CES 510
Kim, Sukyoung. M.S. 1986. "Deflocculation Theory," 1983 – Ceramic Fabrication Processing
Krubner, Ales. M.S. 1994. "Gelcasting of Binary Composites," 1992
Lee, Donghun. M.S. 1995. "Thermal Degredation of Polymers," 1994 – CES 510
Lee, Donghun. M.S. 1995. “Polyelectrolytes Adsorption," 1994 – CES 510
Likitvanichkul, Sumalee, Ph.D. 1997. "Gel Casting: A Novel Processing Technique," 1991 –
CES 510
Love, Mark. B.S. 1974. "Flow Patterns in Ram Pressed Ware," 1974 – CES 509
Paisley, Robert. M.S. 1977. 1976 – CES 510
Pierce, Laurie. B.S. 1985.
Price, David. M.S. 1981. "Compressibility and Permeability of an Electrical Porcelain," 1979 –
CES 510
Price, James. Ph.D. 1984. “Densification Mechanisms During Hot-Pressing," 1975
Rabidoux, Clifford. M.S. 1988. "Preparation and Characterization of Silicon Nitride Powders,"
1986 – CES 509
Rao, Madhav. "Effects of Extrusion Papameters on Extrusion Force."
Sainamthip, Prinya. Ph.D. 1987. "Comparison of Particle Size Distribution of Wollastonite Using
Microtrac and Sedigraph Analyzers," 1983 –CES 509
Shattes, David. B.S. 1983. "Spray Drying," 1983 – CES 409
Silsbee, Michael. M.S. 1984. "Gypsum Plaster Molds," 1982 – CES 510
Stanford, Gerald. Ph.D. 1983. "The Compaction of Potassium Bromide and Alumina Powders,"
1979 – CES 510
Steere, Thomas. M.S. 1985. "The Effect of Sulfuric Acid on Some Plaster Mold Properties,"
1981 – CES 510
Vitch, Susan. M.S. 1988. "Ion Exchange Strengthening of Glass," 1986 – CES 509
Votava, Ward. M.S. 1980. "Particle Size Characterization on the Scanning Electron Microscope,"
– CES 509
Wight, John. Ph.D. 1996. "Injection Molding of Ceramic Powders," 1994 – CES 550