MACROCUTC N C C U T T I N G S O L U T I O N SC N C C U T T I N G S O L U T I O N S

Macro Weld Pty Ltd – Servicing Australia1300 211 200 | E-mail: sales@macroweld.com.au

CNC CUTTINGSYSTEMS

Macro Weld

ABOUT US

We service what we sell and off er fast and effi cient on site servicing and maintenance Australia wide. Macro Weld Import Welding equipment, consumables and CNC plasma cutting equipment from around the World and work closely with our suppliers to ensure we provide expert knowledge of their products.

Macro Weld can also provide a complete range of hire equipment through Macro Hire, some of the products available are; welding machines,

welding generators, tube and pipe cutters, bandsaw machines, plasma cutters, stainless cleaning machines and more.

Some of the brands we supply include WECO, Tech Weld, Hypertherm, Macro Cut, Binzel, Fronius, Kemppi and more. Macro Weld welcome you and look forward to fi nding the best solution for your business.

WELCOME TO MACRO WELD

Striving to exceed the expectations of the welding industry

Mission Statement

To become the welding industry's most trusted and helpful solutions provider with our ethos of honesty, loyalty, humility and continuous innovation.

Vision Statement

Our service levels ensure that we become the supplier of choice of every client.

Macro Weld is one of Australia’s leading suppliers of CNC cutting equipment and welding equipment and with over 40 years’ experience we provide innovative solutions that are helping our clients succeed.

An extensive knowledge of the industry, a product range that is continually expanding and our 360° machine support sets us apart, providing a complete, satisfying experience for you as a valued client.

MACROHIREW E L D I N G S U P P LY S P E C A L I S T SW E L D I N G S U P P LY S P E C A L I S T S

MACROCUTC N C C U T T I N G S O L U T I O N SC N C C U T T I N G S O L U T I O N S

MACRO FUMEW E L D I N G S U P P LY S P E C A L I S T S

MACRO FUMEW E L D I N G S U P P LY S P E C A L I S T S

www.macroweld.com.au sales@macroweld.com.au 1300 211 200

The supplier of choice

Macro Weld CNC Cutting System Proposal

MACRO CUT CNC CUTTING SYSTEMS PROPOSAL

KNOWLEDGE

Extensive training and knowledge of the industry

SUPPORT360 machine support. 40 years of experience

SERVICEWe service what we sell.

On-site technicians available

RESULTSFormuals to show you how

to work smart not hard.

Our dedicated staff of Macro Cut provide demonstrations by appointment, formulas to see how a cutting system can save your business time and money and offer lifetime 360° after sale machine support! We work with you to learn about your business to provide you the best solution to suit your applications.

FROM

THE FACTORY3 YEAR

WARRANTY

Incorporating Hypertherm Plasma systems, Macro Cut CNC cutting systems come in variety of different table sizes, are packed with features and have the ability and power to cut many different applications in different settings depending on your selections and personal operating requirements.

BENEFITS OF MACRO CUT

• Macro Cut machines can cut a variety of metals from stainless and mild steel to aluminium, copper, brass and zinc etc.

• Cut thicknesses from 0.5mm to 25mm and larger depending on plasma selected, delivering excellent cut quality.

• ON-SITE TRAINING Australia wide on-site training with a CNC specialist is available. Includes 8 hours of one-on-one machine and software operation training. Standard with select packages, an optional extra for the others.

• ON-SITE COMMISSIONING Includes levelling of bed, checking operating parameters on-site and bolting down of machine. Purchased as an optional extra. Does not include the following: - Unloading and positioning of machine - Hard wiring of electrical equipment

• WE SERVICE WHAT WE SELL Lifetime after sales support. On-site technicians when required for repair or servicing.

• 3 YEAR FROM THE FACTORY WARRANTY Due to our extensive testing and ongoing advancements with the Macro Cut range of CNC Plasma and Gas cutting units, we offer a 3 year "From the factory" warranty on this equipment. This offer is unparalleled in the CNC cutting sector in Australia. Warranty does not include wear and tear.

MACROCUTC N C C U T T I N G S O L U T I O N SC N C C U T T I N G S O L U T I O N S

www.macroweld.com.au sales@macroweld.com.au 1300 211 200

MACRO CUT CNC CUTTING SYSTEMS PROPOSAL

Manufactured in the United States, Hypertherm Powermax systems are handheld or mechanized plasma systems for cutting and gouging metal.

Plasma is created when gas is ionized by electrical energy. Inside the Powermax systems, its intense heat (up to 22,000° C) is used to melt metal. Compressed air or nitrogen blows the molten metal away, leaving a clean edge that’s ready to weld in most cases.

Hypertherm technology is state-of-the-art allowing it's consumers to deliver faster speeds and high quality cuts. Easy to operate machinery with simple controls, high portability and a stable arc allows even beginners to operate.

“This CNC machine purchased off Macro Weld has proven to be not only one of our favourite fabrication tools, its precise cut is reassuring to our boilermakers! Its so handy to be able to cut a part within minutes of concepting an idea.”

- Dave, QMI C� � act� s

“We brought or Intercut HT CNC Plasma 1500mm x 3000mm with a Hypertherm PMX125 and its been a great machine with great aftersales service and advice from Jerry and the team at Macro Weld”

- Rich� d Johns� , Lifting Vict� ia

“Through my dealings with Macro Weld, they will always go the extra mile to make sure you get what you order on time and on budget. With good and reliable follow up service.”

- Steven W

Macro Weld CNC Cutting System Proposal

INTECUT 3 & 5 • Intecut 3 1.2 x 2.0m water table • Intecut 5 1.5 x 3.0m water table • Lifetime aftersales support • Operates from 6,000mm per minute • Nesting/drawing software provided • 7’’ inch control screen • Three year from the factory warranty

INTECUT HT

• 1.5 x 3.0m water table • Large 17" control screen • Operates from 10,000mm per minute • Lifetime aftersales support • Nesting/drawing software provided • Higher speed and precision operating from 10,000 per minute • Steel structure body to ensure durability and precision • Three year from the factory warranty

WONDERCUT

• 1.5 x 3.0m water table • 7’’ inch control screen • Operates from 9,000mm per minute • Strong alloy structure to achieve accuracy and reliable cutting • Lifetime aftersales support • Nesting/drawing software provided • Higher speed and precision operating from 9,000 per minute • Three year from the factory warranty

FLASHCUT

• 1.5 x 3.0m water table• Heavy duty design for continous production cutting• Large 17" control screen• Operates from 12,000mm per minute• Nesting/drawing software provided• Lifetime aftersales support• Optional scriber• Three year from the factory warranty

OUR RANGE

MACRO CUT CNC RANGE

www.macroweld.com.au sales@macroweld.com.au 1300 211 200

MACRO CUT HYPERTHERM RANGE

Hypertherm MAXPRO200®

• Fastest cut speeds in its class produce more fi nished parts per hour• Engineered with 100% duty cycle for the most demanding production

environments• Superior cut quality and consistency minimise the need for costly

secondary operations.

Hypertherm Powermax 45® XPPhase Power 1 or 3 Phase

Duty cycle rati ng 45A @ 50%

Cut capacity Max. 16mm

Severance 29mm

Pierce 12mm

Dimensions LxWxH 442x173x357mm

Hypertherm Powermax 65® XPPhase Power 3 Phase

Duty cycle rati ng 65A @ 50%

Cut capacity Max. 25mm

Severance 32mm

Pierce 16mm

Dimensions LxWxH 500x234x455mm

Hypertherm Powermax 85® XPPhase Power 3 Phase

Duty cycle rati ng 85A @ 60%

Cut capacity Max. 32mm

Severance 38mm

Pierce 20mm

Dimensions LxWxH 500x234x455mm

Hypertherm Powermax 105® XPPhase Power 1 & 3 Phase

Duty cycle rati ng 105A @ 80%

Cut capacity Max. 38mm

Severance 50mm

Pierce 22mm

Dimensions LxWxH 592x275x508mm

Hypertherm Powermax 125® XPPhase Power 3 Phase

Duty cycle rati ng 125A @ 100%

Cut capacity Max. 44mm

Severance 57mm

Pierce 25mm

Dimensions LxWxH 500x234x455mm

Duty cycle rati ng 100% @ 33 kW, at 40° CSeverance From 75 mmPierce From 32 mm

www.macroweld.com.auMacro Weld Pty Ltd – Servicing AustraliaPhone: 1300 211 200E-mail: sales@macroweld.com.au www.macroweld.com.au

Enquire today

1300 211200

Demonstrations of a machine may be available in your area. Please do not hesitate to contact us for any further information, or send your order through on email.

We look forward to supplying you soon!

MACROCUTC N C C U T T I N G S O L U T I O N SC N C C U T T I N G S O L U T I O N S