CNC flat bed lathe AXIOM

For extremely heavy workpieces and machining lengths up to 30 m

T e c h n i c a l D a t a s h e e t

w w w . k a a s t . d e

A X I O M

*The above specifications are subject to change without prior notice, no liability for printing mistakes. Machine may be shown with optional equipment.

KAAST Werkzeugmaschinen GmbH · Gadelander Straße 172 · D-24539 Neumünster / Germany · Phone: +49 (0) 4321-25 20 03 -0 · Fax: +49 (0) 4321-25 20 03 -90 · E-Mail: info@kaast.de

• Large ballscrews ensure long-lasting precision

• The standard telescopic enclosure can be moved for loading and unloading of the machine, to provide good accessibility to the most important areas

• For the machines of the AXIOM Series, only

Faceplate

Tool change with live tools

3-pos. guideways in Z-axis

Tailstock with hydraulic quill

components from leading manufacturers were used so as to ensure maximum machine availability

• The impressively high workpiece weights for this class of machines can be significantly increased by steady-rests from SMW-Autoblok

• Powerful spindle motors with high torque for ef-ficient processing even in difficult to cut materials

• The machine bed impresses with extremely high stiffness, due to the heavily ribbed casting

• Large bed widths from 585 to 1400 mm

4 Fagor 8055i CNC control4 2 electronic handwheels4 4-jaw independent chuck4 4-pos. manual tool changer4 Heat exchanger for control cabinet4 Chips / splash protection4 Coolant system4 Spindle sleeve and dead center4 Tailstock with towing device

4 Automatic central lubrication4 Gear-box, 3-steps (automatic switching)4 Guideways, induction hardened and ground)4 LED working light4 3-color signal light4 Auxiliary service tools4 Foundation screws and machine feet4 Operation manual

Standard configuration:

Optional configuration:n Screw type chip conveyor (front)n Chain type chip conveyor (back)n Chuck & face plate (serveral sizes)n Spindle oil cooling unitn Back-chuck (on left side ) for double chucking of

long workpiecesn Hydraulic tailstock programmable quilln Steady rest (several sizes)n Follow rest (several sizes)

n Spindle bore up to max. Ø 410 mm (16”)n 4-pos. hydraulic tool changern 8-pos. hydraulic tool changer (Duplomatic)n 12-pos. hydraulic tool changer (Duplomatic)n VDI 40/50/60 tool changer with driven toolsn Integrated C-axis-motor with HEIDENHAIN

encodern SIEMENS CNC-controln FANUC CNC-control

w w w . k a a s t . d e

A X I O M

*The above specifications are subject to change without prior notice, no liability for printing mistakes. Machine may be shown with optional equipment.

KAAST Werkzeugmaschinen GmbH · Gadelander Straße 172 · D-24539 Neumünster / Germany · Phone: +49 (0) 4321-25 20 03 -0 · Fax: +49 (0) 4321-25 20 03 -90 · E-Mail: info@kaast.de

4-pos. hydraulic tool changer

Technical specifications AXIOM

330 430 500 600 700

Workpiece length mm 1000 / 1500/ 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 / 13000 / 14000 / 15000 / 16000 (39.4 – 630”)

Max. turning diameter over bed mm 660 (26”) 860 (34”) 1000 (39”) 1200 (47”) 1400 (55”)Max. turning diameter over slide mm 310 (12”) 510 (20”) 650 (26”) 820 (26”) 1020Width of bed mm 558 (22”) 692 (27”)

Spindle noseSpindle bore mmSpindle-Speed rpm

D1-11, Ø 130 mm (5”) ; L: 40-130, M:130-400, H: 400-1200A2-11, Ø 165 mm (6.5”), L: 20-110, M: 110-320, H: 320-660A2-15, Ø 230 mm (9”), L: 20-110, M: 110-230, H: 320-660

A2-20, Ø 310 mm (12”), L: 20-100, M: 100-200, H: 200-400A2-20, Ø 360 mm (14”), L: 20-100, M: 100-200, H: 200-300A2-28, Ø 410 mm (16”), L: 20-100, M: 100-200, H: 200-250

A2-11, Ø 165 mm (6.5”), L: 20-110, M: 110-320, H: 320-660A2-15, Ø 230 mm (9”), L: 20-110, M: 110-320, H: 320-660

A2-20, Ø 310 mm (12”), L: 20-100, M: 100-200, H: 200-400A2-20, Ø 360 mm (14”), L: 20-100, M: 100-200, H: 200-300A2-28, Ø 410 mm (16”), L: 20-100, M: 100-200, H: 200-250

Spindle taper MT15 -X-axis travel mm 330 (13”) 430 (17”) 500 (20”) 600 (24”) 700 (28”)Z-axis travel as peak width is reduced by 350 mm (14”) as peak width is reduced by 650 mm (26”)Feed X-axis m/min 5 (197”/min)Feed Z-axis m/min 5 (197”/min)Work feed mm/rev. 0.001-500 (0.00004-20”/rev)Main motor kW 22 (30 Hp) 30 (40 Hp) 37 (50 Hp)Power X-axis servo motor kW 2.5 (3.3 Hp) 3.7 (5 Hp)Power Z-axis servo motor kW 8 (11 Hp) 11 (15 Hp)Ballscrew-Ø X-axis mm 40 (1.6”)Ballscrew-Ø Z-axis mm 63/80 (2.5/3.1”) 80 (3.1”)Tailstock-Ø mm 115 (Option: 160) (4.5” (Option: 6.3”)) 140 (Option: 200) (5.5” (Option: 7.9”))Tailstock travel mm 300 (11.8”) 350 (13.8”)Tailstock taper MT6

Technical specificationsAXIOM

800 1000 1100 1200 1300

Workpiece length mm1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 / 13000 / 14000 / 15000 / 16000 / 17000 / 18000 / 19000 / 20000 / 21000 / 22000 / 23000 / 24000 / 25000 / 26000 / 27000 / 28000 / 29000 / 30000 (59

– 1181”)Max. turning diameter over bed mm 1600 (63”) 2000 (79”) 2200 (87”) 2400 (95”) 2600 (102”)

Max. turning diameter over slide mm 1120 (41”) 1460 (58”) 1660 (65”) 1810 (71”) 2010 (79”)

Width of bed mm 888 (35”) 1150 (45”) 1400 (55”)

Spindle noseSpindle bore mmSpindle-Speed rpm

A2-15, Ø 230 mm (9”), L: 20-100, M: 100-200, H: 200-400A2-20, Ø 310 mm (12”), L: 5-20, M: 20-70, H: 70-300A2-20, Ø 360 mm (14”), L: 5-20, M: 20-70, H: 70-250A2-28, Ø 410 mm (16”), L: 5-20, M: 20-70, H: 70-250

A2-15, Ø 230 mm (9”), L: 20-97, M: 97-200, H: 200-400A2-20, Ø 310 mm (12”), L: 20-97, M: 97-200, H: 200-350A2-20, Ø 360 mm (14”), L: 20-97, M: 97-200, H: 200-300A2-28, Ø 410 mm (16”), L: 20-97, M: 97-200, H: 200-250

X-axis travel mm 800 (32”) 1000 (39”) 1100 (43”) 1200 (47”) 1300 (51”)Z-axis travel as peak width is reduced by 650 mm (26”) as peak widthFeed X-axis m/min 5 (197”/min)Feed Z-axis m/min 5 (197”/min)Work feed mm/rev. 0.001-500 (0.00004-20”/rev)Main motor kW 28 (40Hp) 51 (70Hp)Power X-axis servo motor kW 3.7 (5 Hp) 5.5 (7.3 Hp)Power Z-axis servo motor kW 8 (11 Hp) 17 (23 Hp)Ballscrew-Ø X-axis mm 40 (1.6”) 50 (2”)Ballscrew-Ø Z-axis mm 80 (3.1”)Tailstock-Ø mm 200 (7.9”) 250 (9.8”) 300 (11.8”)Tailstock travel mm 450 (17.7”) 500 (20”) 600 (23.6”)Tailstock taper MT6 MT7