Embed Size (px)
Citation preview
CMS3-KRCMS3-KRCARRIAGE FOR WIRE SYSTEMSCARRIAGE FOR WIRE SYSTEMS
For heavy loads Free movement along the wire Fits Altiligne
The CMS3-KR from Vertic is a carriage suitable for heavyloads and fits the wire system Altiligne.
SEGMENTS
✓ General industry✓ Rope access✓ Telecom✓ Wind energy
ARTICLESARTICLES012296174 Vertic, CMS3-KR, Carriage with roller bearing kit
OVERVIEWOVERVIEWThe CMS3-KR is a carriage with roller bearing kit that makes it suitable for heavy loads.
The carriage makes it possible for the user to move along the wire without interruption. It has a large diameter hooking eyelet,allowing the use of any type of connector. The user can also attach and disconnect the carriage everywhere on the wire and thecarriage runs smooth over the support of the fixed fall arrest system.
The carriage fits the wire system Altiligne from Vertic.
PRODUCT SHEET
CRESTO GROUP
Lägatan 3302 63 HalmstadSverige
T. +46 35 710 75 00E. [email protected]
SPECIFICATIONSPECIFICATION
PRODUCT PROPERTIES
Energy absorber No
Fall indicator No
Maximum number of users 1
Maximum load (kg) 100.0
Material Stainless steel
CLASSIFICATION
EN-standard EN 795 : 2012
ANNUAL INSPECTION
Annual inspection Yes, every 12 months
Life span 10 years
Warranty 2+1 year when registered in Inspector
Identification Serial number
RFID No
DOCUMENTS
Manual languages English (EN)
PRODUCT SHEET
CRESTO GROUP
Lägatan 3302 63 HalmstadSverige
T. +46 35 710 75 00E. [email protected]
IMAGESIMAGES
PRODUCT SHEET
CRESTO GROUP
Lägatan 3302 63 HalmstadSverige
T. +46 35 710 75 00E. [email protected]
![mod01 SoC.ppt [호환 모드] - cms3.koreatech.ac.kr · 네트워크및멀티미디어기능필요 실시간처리, ... 디바이스드라이버와응용프로그램개발시개발환경필요](https://img.dokumen.tips/doc/110x75/5e10980735ca6e2ad0764410/mod01-socppt-eeoe-cms3-eoeeeeeee.jpg)
