CMS Operation Guide

8/16/2019 CMS Operation Guide

1/10

Central Management Software Smart CMS Quick Start Operation Guide

SMART CMS

Quick Start Operation Guide


2/10


CMS Operation Guide

Thank you for purchasing our product. If there is any question or request, please do not

hesitate to contact the dealer.

This manual applies to IP Camera, IP High Speed Dome Camera, and NVR

This manual may contain several technically inaccurate points or printing errors, and the

content is subject to change without notice. The updates will be added into the new

version of this manual. We will readily improve or update the products or procedures

described in the manual.

System Requirement:

Operating System: Microsoft Windows XP SP1 and above version / Vista / Win 7 / Server

2003 / Server 2008 32bits

CPU: Intel Pentium IV 3.0 GHz or higher.

RAM: 1G or higher.

Display: 1024×768 resolution or higher.

Web Browser : Internet Explorer 7.0 and above version, Apple Safari 5.02 and above

version, Mozilla Firefox 3.5 and above version and Google Chrome 8 and above version.

Installation

1.Install the main software:

Double-click the program file to enter the InstallShield Wizardinterface.

Click “Next” to start the InstallShield Wizard

Note: The default directory is C:\Program Files\SurveillancePlat


3/10


2. Install the Microsoft Visual C++ 2008

3. Install the Wincap software


4/10


3. Install the Wincap software


5/10


When all software installation finished, then completing the CMS software


6/10


Quick Start

User Login

Double-click the shortcut icon on the desktop to start the software. The fist login

should be creating a super user for login, see below:

For example: Super User and Password are “admin” The login dialog box

Input the user name and password that created, and then click Login to run the software.

The CMS provides user friendly GUI for the convenient and effective operation of the

software. The main control panel of the software is shown below:


7/10


Switch User: Switch the login user.

Language: Select the language and reboot the software to activate the settings. About: View information of the client software, including software name, version, etc.

: Lock the screen operation. Log in the client again to unlock the operation.

Primary Function:

Play Live: Real time monitoring for all the added cameras

Play Back: Remote recorded file view

Alarm Event: Motion detection / Alarm interface

Basic Configuration:

DevConfig: IP device search, add and configuration

EventConfig: Motion detection / Video loss / Alarm configuration

VideoConfig: Record schedule / Snapshot schedule

UserConfig: User name & password setup

PlatConfig: General file setup

Extended Function:

EMapView: E-Map function


8/10


DevConfig

Click “ “ to search, add and configuration IP device

Click “ Online” to search the IP device


9/10


Then add the IP device

Click “Play Live” to enter the live view interface, Drag the camera from the list to the right

display window, or double-click the camera node to view the live video.


10/10


Live View

Stop View & Close / Audio adjust View window select: 1,4…36 channel

Screen select: Normal / Wide

Full screen

: Snapshot / Recording / Audio / Stop Preview

Documents

CMS Operation Guide