4
Filter Cage retainer Our Special Materials : Galvanized : Lifetime 5 – 7 Years Stainless Steel: Lifetime above 10 Years Standard size of filter cage 1) Ø 115 mm x 2000 - 3500 mm 2) Ø 120 mm x 2000 - 3600 mm 3) Ø 130 mm x 2000 - 4000 mm 4) Ø 143 mm x 2500 - 4500 mm 5) Ø 153 mm x 2500 - 6000 mm Our cage is produced using modern technology with high quality of machineries and experienced technicians. The joint rings, trunk-wire, venture, and other accessories are assembled primly to minimize frictions between cage and bag filter Filter cage production facility Approximum 500 Ea/day

Cmf

Embed Size (px)

Citation preview

Filter Cage retainer

Our Special Materials :Galvanized : Lifetime 5 – 7 YearsStainless Steel: Lifetime above 10 Years

Standard size of filter cage1) Ø 115 mm x 2000 - 3500 mm2) Ø 120 mm x 2000 - 3600 mm3) Ø 130 mm x 2000 - 4000 mm4) Ø 143 mm x 2500 - 4500 mm5) Ø 153 mm x 2500 - 6000 mm

Our cage is produced using modern technology with high quality of machineries and experienced technicians. The joint rings, trunk-wire, venture, and other accessories are assembled primly to minimize frictions between cage and bag filter

Filter cage production facility

Approximum 500 Ea/day

Dust Collector

Five principal types of industrial dust collectors are:

1. Inertial separators 2. Fabric filters 3. Wet scrubbers 4. Electrostatic precipitators 5. Unit collectors

A dust collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners, which use disposable filters to remove dust.