CMC SisakCMC Sisakoverviewoverview

Rev. V-2010Rev. V-2010

WELCOME TO WELCOME TO CMC SISAKCMC SISAK

a leading Steel blooms & Seamless pipe leading Steel blooms & Seamless pipe

producer in the South East European region producer in the South East European region

andand

part of CMC (Commercial Metals Company) part of CMC (Commercial Metals Company)

headquartered in Dallas TX, USA. headquartered in Dallas TX, USA.

• CMC International took over Sisak Steel mill in September 2007.• Commercial Metals Company stock is traded on the NYSE under

the symbol CMC. • CMC's mission is to manufacture, recycle and market steel, to be

able to meet our customers‘ needs.

CMC Americas 

• RecyclingRecycling• Steel mills with aSteel mills with a capacity of 2.4 mil. tons capacity of 2.4 mil. tons • Fabrication & DistributionFabrication & Distribution

CMC InternationalCMC International

• MillsMills• Fabrication & Fabrication &

DistributionDistribution

LOCATION

Our company is Our company is located in Sisaklocated in Sisak,, 50 50 kmkm south from south from Zagreb, capital of Zagreb, capital of CroatiaCroatia.

HISTORY & TRADITIONHISTORY & TRADITIONSince Since 19481948 CMC Sisak has CMC Sisak has bee been n providing customers world wide with providing customers world wide with carbon steel seamless pipes carbon steel seamless pipes for more for more than 60than 60 yearsyears..

WWe have e have earned our position as a earned our position as a reliable reliable supplier to ousupplier to our r customers.customers.We know steel and we knowWe know steel and we know pipespipes..Our products represent us – our Our products represent us – our knowledge, our skills and ourknowledge, our skills and our valuesvalues..

FACILITIESFACILITIES ANDAND EQUIPMENTEQUIPMENT

MELT SHOP:MELT SHOP: Annual capacityAnnual capacity 450.000,00 t 450.000,00 t

SSEAMLESS PIPE MILLEAMLESS PIPE MILL : : Annual capacityAnnual capacity 110.000,00 t110.000,00 t

MANAGEMENT BOARDMANAGEMENT BOARDPresident of the BoardPresident of the Board

Paško VelaPaško Vela

VP Human ResourcesVP Human ResourcesTomislav ZajecTomislav Zajec

VP FinanceVP FinanceDorota PieszczochDorota Pieszczoch

VP OperationsVP OperationsZdravko NikolićZdravko Nikolić

MARKETMARKET

USA 50%

N.A. 30%

S.E. 10%M.E. 10%

EXPORT: 90% ; DOMESTIC: 10%EXPORT: 90% ; DOMESTIC: 10%

INVESTMENTSINVESTMENTS

It involves: It involves:

• the construction of a new state-of-the art Electric Arc the construction of a new state-of-the art Electric Arc Furnace;Furnace;

• the installation of a Ladle Furnace (LF); the installation of a Ladle Furnace (LF); • the modernization of the existing Continuous Billet Caster the modernization of the existing Continuous Billet Caster

(CC), together with the installation of new Ladles and (CC), together with the installation of new Ladles and Tundishes; and Tundishes; and

• the installation of a fabric filter Bag House and Melt Shop the installation of a fabric filter Bag House and Melt Shop sheetingsheeting.

NEW!NEW! Melt ShopMelt Shop

NEW!NEW! Melt Shop equipment Melt Shop equipment

MELT SHOPMELT SHOP PROCESS FLOWPROCESS FLOW

STEEL MAKINGSTEEL MAKING

ROUND STEEL BLOOMSROUND STEEL BLOOMSFormatFormat 410 mm410 mm 320 mm320 mm 280 mm280 mm 250 mm250 mm 210 mm210 mm

ShapeShape RoundRound RoundRound RoundRound RoundRound RoundRound

Weight Kg/mWeight Kg/m 10361036 631631 483483 385385 272272

Tolerance (%)Tolerance (%) 272272 272272 272272 272272 272272

Quality (%)Quality (%) <2<2 <2<2 <1,5<1,5 <1<1 <1<1

Lenght Lenght ToleranceTolerance 4 mm4 mm 4 mm4 mm 4 mm4 mm 4 mm4 mm 4 mm4 mm

Minimum lenghtMinimum lenght 3,25 m3,25 m 3,25 m3,25 m 3,25 m3,25 m 3,25 m3,25 m 3,25 m3,25 m

Maximum Maximum lenghtlenght 5,25 m5,25 m 5,25 m5,25 m 5,25 m5,25 m 5,25 m5,25 m 5,25 m5,25 m

Straightness +-Straightness +- 4 mm4 mm 2 mm2 mm 2 mm2 mm 1,5 mm1,5 mm 1,5 mm1,5 mm

EMS StirringEMS Stirring YesYes YesYes YesYes YesYes yesyes

HOT PILGER TECHNOLOGYHOT PILGER TECHNOLOGY

• CMC Sisak d.o.o. produces seamless pipes with state of the CMC Sisak d.o.o. produces seamless pipes with state of the art hot pilger rolling technology.art hot pilger rolling technology.

• Our pilger rolling mill is carried out by a single pair of rolls Our pilger rolling mill is carried out by a single pair of rolls and one mandrel. In the initial phase of production hot and one mandrel. In the initial phase of production hot round steel billets are hollowed, then rolled and round steel billets are hollowed, then rolled and stretchedstretched until achieving desired length and diameter.until achieving desired length and diameter.

HOT PILGER TECHNOLOGYHOT PILGER TECHNOLOGY

P R O D U C T SP R O D U C T S

LINE PIPES -API 5 LLINE PIPES -API 5 L • Produced according to Produced according to

standard API 5L with standard API 5L with outside diameter from 3 outside diameter from 3 1/2˝ to 14˝, and wall 1/2˝ to 14˝, and wall thickness from 0,156˝ to thickness from 0,156˝ to 0,750˝.0,750˝.

• Used for oil, gas and water Used for oil, gas and water transmission. transmission.

CASING & COUPLING - API 5 CTCASING & COUPLING - API 5 CT• Produced according to Produced according to

standard API 5CT with standard API 5CT with outside diameter from 4 outside diameter from 4 1/2˝ to 13 3/8˝ and wall 1/2˝ to 13 3/8˝ and wall thickness from 0,205˝ to thickness from 0,205˝ to 0,514˝.0,514˝.

• Used for oil and gas Used for oil and gas industry.industry.

CONSTRUCTION AND BOILER PIPESCONSTRUCTION AND BOILER PIPES• Produced with Produced with

101,6mm-355,6mm 101,6mm-355,6mm outside diameter or 4˝-outside diameter or 4˝-14˝ with according wall 14˝ with according wall thickness from 4,0 mm thickness from 4,0 mm to 20,0 mm.to 20,0 mm.

• Used in petrochemical, Used in petrochemical, ship building and ship building and construction industry.construction industry.

QUALITYQUALITY

• Maintaining and obtaining all needed certificates for our Maintaining and obtaining all needed certificates for our products and quality system.products and quality system.

• Uncompromising implementation of all quality managementUncompromising implementation of all quality management system elements by all employees.system elements by all employees.

• Continuous quality improvement of our products and qualityContinuous quality improvement of our products and quality management system.management system.

• Profitable way of thinking at all levels of organization.Profitable way of thinking at all levels of organization.

CERTIFICATES CERTIFICATES

ISO 9001:2008ISO 9001:2008

API 5 LAPI 5 L

API 5 CTAPI 5 CT

PED 97/23/ECPED 97/23/EC

Manufacturer approval for seamless pipes,Manufacturer approval for seamless pipes,material testing and non-destructive testingmaterial testing and non-destructive testing

AD 2000/W0/HP 100 R/TRD 100AD 2000/W0/HP 100 R/TRD 100

CPD 89/106/EECCPD 89/106/EEC

Manufacturer approval for Manufacturer approval for seamles pipes and tubes seamles pipes and tubes including steel makingincluding steel making

Manufacturer approval Manufacturer approval for steel tubes and pipesfor steel tubes and pipes

Manufacturer approval for Manufacturer approval for seamless pipes, testing of seamless pipes, testing of metal chemical composion metal chemical composion

and destructive testingand destructive testing

CERTIFICATESCERTIFICATES

ENVIRONMENTAL POLICYENVIRONMENTAL POLICY• Environmental policy is an Environmental policy is an

integral part of business policy integral part of business policy and strategy and development and strategy and development of CMC Sisak.of CMC Sisak.

• CMC Sisak promotes recycling CMC Sisak promotes recycling and pollution prevention at all and pollution prevention at all levels of steel and pipe levels of steel and pipe production, develop and production, develop and implement the best solutions to implement the best solutions to environmental situations that environmental situations that are in conformance with the are in conformance with the regulatory structure and regulatory structure and consistent with the Company's consistent with the Company's business objectivesbusiness objectives. .

SAFETY RULES! SAFETY RULES! 

CMC has a well established CMC has a well established safety culture that helps protect over safety culture that helps protect over

14,000 employees in 14 countries 14,000 employees in 14 countries serving CMC customers around the serving CMC customers around the world. At CMC, safety comes first.world. At CMC, safety comes first.

SAFETY ALWAYSSAFETY ALWAYS ! ! 

THE CMC WAYTHE CMC WAY• FFocus on safety.ocus on safety.• PProvide rovide workingworking environment where anyone can develop environment where anyone can develop

to trueto true potential.potential.• CCommunicate honestly and consistently with each other, ommunicate honestly and consistently with each other,

with our suppliers and our customers. with our suppliers and our customers. • FForge relationships founded on respect. orge relationships founded on respect. • TTake pride in our own efforts and the overall success of our ake pride in our own efforts and the overall success of our

Company.Company.• SServe our customers the world over with a single standard erve our customers the world over with a single standard

of excellence.of excellence.• LLive up to our core values, every day.ive up to our core values, every day.

MISSION MISSION

““SupportSupport the long term business the long term business success of our valued customerssuccess of our valued customers””

THANK YOUTHANK YOUFOR YOUR TIME AND FOR YOUR TIME AND

ATTENTIONATTENTION