PROTECTING THE DEVELOPER’S INVESTMENT ACROSS THE

ENTIRE PROJECT CYCLE

INTRODUCING

CH•IV International was established in 1991 as CH•IV Corporation. The company provides consulting services to LNG asset developers, regulators, facility owners, operators and lenders to ensure assets are designed, developed, constructed and operated safely and in accordance with codes, regulations, and the project’s technical and commercial specifications.

CHIV specializes in the provision of LNG engineering and consulting services to the global LNG sector including North America, Asia, Africa, Europe, the Pacific Rim, and South America.

CHIV’s specialization in the LNG sector and permitting has enabled the development of design standards and models that allow the company to be more

agile and responsive than its larger competitors.

CHIV has provided services to the majority of US LNG export projects that sit before the Federal Energy Regulatory

Commission (FERC), and many small-scale LNG production projects designed under the US

Department of Transportation PHMSA vapor dispersion siting criteria. CHIV is also a technical

leader in the design of bunkering systems for ships using LNG for engine fuel.

In 2014 CHIV was acquired by Australia’s premier oil and gas contractor Clough Limited.

CHIV will continue to act independently and can now leverage complementary skills and synergies

across the entire LNG spectrum to provide a significantly strengthened LNG service to clients.

LNG PRODUCTION ENGINEERING AND CONSULTING SERVICES

zz Hazard Exclusion Zone Studieszz Plant Life Expectancy Studies zz Facility / Equipment Due Diligence Studieszz Gas Supply / Demand Studieszz LNG Shipping Trade Simulationszz Non-Traditional LNG Production Conceptszz Vapor Handling Evaluationszz Waste Heat/Waste Cold Utilizationzz Liquefaction Cycle Design or Selectionzz Pre-treatment System Performance Optimization Analysis zz Landfill (LFG) Liquefactionzz FEED Oversight / EPC Pre-Qualification, Bid Preparation,

Selection, Negotiationzz Detailed Design zz Construction Inspection zz Emergency Response Manual Development

PRODUCTS & SERVICESCH•IV provide the full spectrum of LNG consulting and design services from feasibility through to operation, to protect the developer’s investments across the entire project cycle. Specialised LNG products and services include import and export terminals, small scale and peakshaving facilities, regulatory support and production engineering and consulting.

LNG IMPORT AND EXPORT FACILITIES

zz Conceptual Designzz Front End Engineering Design

(FEED)zz Permit Submission Operation

Procedureszz Technician Trainingzz Startup & Commissioningzz Project Completionszz Owner’s Engineering Supportzz Technology Evaluations

LNG REGULATORY SUPPORT

zz Engineering Designs for Permit Applications zz Regulatory Compliance Audit and Support serviceszz LNG Vapor Dispersion Studies zz LNG Fire Radiation Studies zz HazOp (Hazards and Operability) Studies zz Operation Procedures zz Maintenance Procedures zz Fire Protection Evaluations Prevention Plans zz Emergency Response Planszz Training - Operations and Maintenance, Security,

Fire Protection and Records zz Incident Investigations zz LNG Safety Presentations

SMALL SCALE AND PEAKSHAVING FACILITIES

zz Feasibility Studieszz Front End Engineering Design (FEED) zz Permitting Supportzz EPC Bid Preparation and Evaluationzz Start-Up and Operationzz Owner’s Engineering Supportzz Cold Box Optimization (CBOP)*

*The Cold Box Optimization Program can be used to predict the performance of your plant and in turn increase LNG production, reduce fuel consumption, minimize risk of pipeline surcharges due to extended liquefaction season and feed forward monitoring.

LNG IMPORT AND EXPORT FACILITIES

CLIENT: Freeport LNG

PROJECT: Freeport LNG Project

LOCATION: USA, Texas

SCOPE: Pre-FEED services investigating the design and regulatory requirements for converting the existing LNG import terminal to a world class LNG production and export facility. This was followed by the award of the Balance of Plant FEED for the 13.4 MPTA liquefaction facility.

CLIENT: EcoEléctrica

PROJECT: LNG Import Terminal

LOCATION: Puerto Rico

SCOPE: Owner’s engineering support including preparation of FEED for terminal expansion and LNG trailer loading station, procurement specifications for major equipment, EPC contractor scope of work, and oversight of detailed design.

CLIENT: Magnolia LNG, Houston, Texas, USA

PROJECT: Lake Charles LNG Production and Export Facility

LOCATION: USA, Louisiana

SCOPE: Front end engineering design (FEED) and compilation of the Federal Energy Regulatory Commission (FERC) Resource Report 11 and 13 for the proposed 8 MTPA LNG production and export facility. This included siting analysis (including vapor dispersion and thermal radiation exclusion zones, overpressure modeling, and toxicity modeling), NFPA 59A Fire Protection Evaluation, hazard detection, control, firewater system design details, and other required documentation. CHIV also oversaw the preparation of the LNG tank design, marine facilities design and geotechnical analysis.

CLIENT: Energy World Corporation

PROJECT: PT South Sulawesi LNG Facility

LOCATION: Indonesia

SCOPE: Front end engineering design (FEED) for the balance of plant for this 2.0 (expandable to 5.0) MTPA gas liquefaction and marine export facility.

SMALL SCALE AND PEAKSHAVING FACILITIES

CLIENT: State of Connecticut

PROJECT: Waterbury LNG Facility

LOCATION: USA, Central Connecticut

SCOPE: Engineering services to assure regulatory compliance. This included review and oversight of the design, safety and operational aspects of the facility, encompassing: RFP bid packages, EPC scope of work, design calculations, detailed drawings, procedures and manuals, project specifications and construction.

CLIENT: Confidential

PROJECT: Natural Gas Liquefier Feasibility Study

LOCATION: USA, New England

SCOPE: Study to evaluate a series of options to replace total historical LNG peakshaving liquefaction capacity at four different locations. The study considered a variety of liquefaction capacities, liquefaction technologies and electric or gas turbine drive. The study also considered siting criteria, permitting limitations and LNG trucking access. Capital and operations and maintenance cost estimates were generated for 16 different cases.

CLIENT: Baltimore Gas & Electric

PROJECT: Spring Gardens LNG Peakshaving Facility

LOCATION: USA, Maryland

SCOPE: Providing on-site engineering support ranging from oversight of cold box replacement start-up, operating procedure updating, hazard mitigation studies and hazard exclusion zone calculations.

CLIENT: Northeast Midstream of Toronto

PROJECT: Thorold LNG Production and Truck-Out Facility

LOCATION: Canada, Thorold, Ontario

SCOPE: Preliminary diligence to be used to assist the client to market the project to new equity investors and refine their views on the high level technical risks of the project. The project is a greenfield 180,000 gallon per day LNG production storage and truck-out facility.

CLIENT: Oregon LNG

PROJECT: LNG Export Facility

LOCATION: USA, Northwest Oregon

SCOPE: FEED for the 9 MTPA LNG production and export facility for Oregon LNG. The FEED was submitted in a permit application to construct the terminal.

CLIENT: Puget Sound Energy

PROJECT: Tacoma Fuels Project LNG Facility

LOCATION: USA, Washington State

SCOPE: Provision of permitting, site feasibility and selection and early engineering for this innovative 0.2 MTPA (scalable) liquefaction facility, purpose built to provide LNG as marine vessel bunkers.

CLIENT: Trunkline LNG

PROJECT: Lake Charles Liquefaction Project

LOCATION: USA, Louisiana

SCOPE: Development support of FERC resource reports for Trunkline LNG’s 15 MTPA Liquefaction Facility.

CLIENT: Dominion Cove

PROJECT: Cove Point LNG Liquefaction Expansion Project

LOCATION: USA, Maryland

SCOPE: Owners engineer role following initial support in the development of Resource Reports 11 and 13 and associated 49 CFR Part 193 requirements for the liquefaction proposal

LNG REGULATORY SUPPORT

LNG PRODUCTION ENGINEERING CONSULTING SERVICES

CLIENT: Liquid Niugini Gas

PROJECT: LNG Production and Export Project

LOCATION: Papua New Guinea

SCOPE: Study to evaluate various piping and LNG storage configurations for the production and export of LNG from the facility. The study determined the impact of various configurations and pipe insulation options on the amount of generated boiloff gas (BOG). The study also included cost estimates for several pipeline systems, comparison of available options and proposed methods of BOG management.

CLIENT: Black & Veatch

PROJECT: Energía Costa Azul LNG Terminal

LOCATION: Mexico

SCOPE: Commissioning management assistance including directing the repair of hundreds of cryogenic valves. CHIV wrote the procedure for and directed the facility dry out. CHIV also provided oversight of the cooldown of the LNG tanks, and assisted in directing the preliminary and final terminal cooldown and start-up.

CLIENT: Adriatic LNG

PROJECT: Adriatic LNG Receiving Terminal

LOCATION: Adriatic Sea

SCOPE: Technical services commencing with a “Cold Eyes Review” of the facility design, review of facility start-up procedures and start-up technical support for the world’s first gravity-based LNG import terminal.

CLIENT: Petronet LNG

PROJECT: Dahey Jetty Expansion Project

LOCATION: India

SCOPE: Developed a detailed feasibility study and cost estimate for an expansion project to accommodate increased terminal capacity from 5 MTPA to more than 10 MTPA. Follow on work included preparation of topside FEED, a comprehensive bid package and RFP to allow Petronet to award contracts to carry out the detailed design, construction and startup of the expanded facilities.

GLOBAL CENTRES OF EXCELLENCE

CAPETOWN

HOUSTON

BALTIMORE

CH•IV

Front End LNG Engineering Consulting

CMR

MARINEMarine

Engineering

engineering to operations

a company

CH•IV is part of a global network of operating centres that bring together highly specialised technical services with high value engineering centres, to provide superior value to global oil and gas clients.

GLASGOW

PERTH

ADELAIDE

MELBOURNE

BRISBANE

PORT MORESBY

ULSAN

BEIJING

JAKARTA

CLOUGH PERTH

Australian EPC

CLOUGH AMEC

Brownfield Engineering

CLOUGH

BRISBANE Coal Seam Gas Engineering &

EPC

CLOUGH

GLASGOWRegional

Engineering Centre

CPESWHigh Value Engineering CLOUGH

COENS Fabrication Yard Commissioning

E2OIndependent

and integrated commissioning

services

BOOTH WELSH

Automation and Controls Systems

Engineering

HOUSTON OFFICE

1221 McKinney Street, Suite 3325, Houston, Texas 77010Phone 713-964-6775Fax 713-622-5513E-mail Houston@CH-IV.com

BALTIMORE OFFICE

1341 Ashton Road, Suite A, Hanover, Maryland 21076Phone 410-691-9640Fax 410-691-9690E-mail Hanover@CH-IV.com