Machine Type : S-C1 + S-C4(AUTOMATIC VACUUM SEAMER WITH CLINCHER)

S-C1 Automatic Vacuum Seamer is specially designed for round can closing under vacuum . Filled can is fed forward through a timing screw and a chain to enter a clinching station, round chuck and an fixed arc clinching make end and can clipped together. Small gap between end and can for air suction in vacuum chamber later. Clinched can is transferred forward to a pocket of index vacuum turret, with eight pockets, in vacuum seaming station. Lifter plate lift can up in vacuum chamber. Four seaming rollers undertake seaming operation. Seam quality meet international sta

ndard. Simple structure and multiple safety devices, easy for operation and maintenance.

Specifications:

Machine Type S-C1 + S-C4Range of Can Dia. 202 - 401DRange of Can Height 38 - 130mmCapacity Per Min. Up to 80 Cpm

Horse Power Required

Main Motor 3HP x 1Clincher 1/2HP x 1Vacuum pump 7.5HP x 1Air Compresser 1/2HP

Floor space overall height2620mm x 1600mm x 2100mm

Net weight (approx.) 2700KgsFeatures :

1. Equipped with one CANCO seaming heads.2. With mechanical knock-out pad, driven by a cam.3. Filled can pass through S-C4 to clip end and can together first.4. Clinching function is effected by a clinching rail and a chuck.5. No can no end device on S-C4.6. Four spindles on S-C4 while single seaming head on S-C1.7. Marker on S-C4 is available on request.8. All parts contact with can/lid are made of stainless steel or bronze.

Machine Type : S-C4 + S-C9 (AUTOMATIC 3-H VACUUM SEAMER)

S-C9 Automatic 3H Vacuum Seamer is specially designed for round can closing under vacuum . Filled can is fed forward through a timing screw and a chain to enter a clinching station, round chuck and an fixed arc clinching make end and can clipped together. Small gap between end and can for air suction in vacuum chamber later. Clinched can is transferred forward into a vacuum chamber with three seaming heads. Lifter plate lift can up in vacuum chamber. Four seaming rollers undertake seaming operation. Seam quality meet international standard. Simple structure and multiple safety devices, easy for operation and maintenance.

Specifications :

Machine Type S-C4 + S-C9Range of Can Dia. 202 - 401DRange of Can Height 46 - 130mmCapacity Per Min. Up to 250 CpmNo. of rev. of seaming head to seam one can 8

Horse Power Required

Main Motor 7.5HP x 1Vacuum pump 15HP x 1Clincher 2HP x 1Air Compresser 1/4HP

Floor space overall height 4865mm x 1410mm x 2040mmSeamer floor space 1880mm x 1410mm x 2040mmClincher floor space 3179mm x 993mm x 1515mmNet weight (approx.) 4450KgsSeamer weight 3500KgsClincher weight 950Kgs

Features:

1. Equipped with three CANCO seaming heads.2. Filled can pass through S-C4A to clip end and can together first.3. Clinching function is effected by a clinching rail and chuck.4. No can would feed into vacuum chamber if vacuum level in the chamber is not enough.5. No can no end device on S-C4A.6. Six spindles on S-C4A while three seaming head on S-C9.7. Marker on S-C4A is available on request.8. All parts contact with can/lid are made of stainless steel or bronze.

Machine Type : S-C4L (AUTOMATIC CLINCH MACHINE)

Specifications :

Machine Type S-C4LRange of Can Dia. 404 - 603DRange of Can Height 110 - 230mmCapacity Per Min. Up to 30 Cpm

Features :

1. Can be connected with with vacuum seamer C18 for food canning.2. All parts contact with can/lid are made of stainless steel or bronze.

Machine Type : S-C87 (AUTOMATIC IRREGULAR CAN CLINCHER)

S-C87 Automatic Irregular Can Clincher is specially designed for irregular can clinching. Filled can is fed forward through a timing screw and a turret to meet with end. Clinching chuck and two clinching rollers push food down and clip end and can body together at two points. Clinched can is carried out by a turret and a chain. Simple structure and multiple safety devices, easy for operation and maintenance.

Specifications:

Machine Type S-C87Range of Can Dimensions 45 mm - 100 mm Length, WidthRange of Can Height 18 mm - 100 mmMaximum Can Diagonal Up to 130 mmQuantity Of Tools 6Capacity Per Min. Up to 80 cpm ; Depending on can shapesHorse Power Required 1HPFloor Space Overall Height 2340L X 1390W X 1525HNet weight 1340 Kgs

Features :

1. Easy accessibility for maintenance.2. Simple mechanism and easy to operate.3. Wild range for different can sizes & shapes.4. With electronic No can No cover (NCNC) and cover feeding error auto stop divece.5. With cover marker for maximum of triple row and seven characters (cover marker is

optional).6. All parts contact with can/lid are made of stainless steel or bronze.