2
Specifications & Construction Aug 09, Rev 5 Available from: Real Flame pioneered the first AGA approved power flue system in 2004. Prior to its development, open fronted gas fires were restricted to using a vertical flue, which prevented installations in many situations such as ground floors in 2 storey homes or apartments. The power flue enables the installation of open fronted gas fireplaces in virtually any situation with a horizontal flue run of up to 13.5m incorporating up to four 90 degree bends. The Real Flame power flue system has been used with great success in many applications including the prestigious Melbourne high rise development “Royal Domain Tower”. Power Flue ConCeived, deSigned, ReSeaRChed, develoPed and Built in auStRalia These notes must be read in conjunction with AS 5601-2004. AGA Approval 6094. NB. Horizontal flue run up to 13.5m incorporating up to four 45º or 90º bends. If your requirement is for a longer run and or needing more bends submit a detail for our written evaluation. internal Motor - hor izontal termina tion internal Motor - vert ical termina tion internal Motor - Rear termina tion Firebox Flue Minimum 25mm clearance from outer flue to combustible interior Minimum 250mm 100mm x 180mm flue extension if required 150mm x 200mm flue extension if required Baffle Termination Motor 320mm 25mm Minimum distance fan motor 200mm 900mm Minimum 450mm x 450mm Access panel 500mm Firebox Top termination 500mm If less than 500mm then flue must terminate 500mm above nearest structure Firebox Minimum clearance 250mm 900mm 450mm x 450mm flush termination for motor service access 150mm x 200mm twin skin flue - optional for additional height Internal motor Baffle Firebox Baffle External motor 150mm x 200mm flue extension 150mm x 200mm twin skin flue (if required) 25mm clearance 340mm m 200mm 900mm ext ernal Motor - horizontal termina tion Warranty: Your Real Flame gas firebox is unconditionally guaranteed for a period of 10 years, all other parts are guaranteed for 12 months from date of purchase. This warranty does not cover outdoor installations For detailed specifications visit: Head Office/Factory/Showroom 1340 Ferntree Gully Rd, Scoresby VIC T: 03 8706 2000 Showrooms 300 Swan St, Richmond VIC T: 03 9428 4443 2a Gordon Ave, Geelong VIC T: 03 5229 0844 654 Pacific Hwy, Chatswood NSW T: 02 8905 0189 36 Kareena Road, Miranda NSW T: 02 8513 6202 173-175 Magill Rd, Norwood SA T: 08 8132 0371 Shop 2/50 James St, Fortitude Valley QLD T: 07 3257 0394 47-53 McDonald St East, Osborne Park WA T: 08 9444 9900

clearance Specifications & Construction twin skin flue

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Specifications & Construction

Aug

09,

Rev

5

Available from:

Real Flame pioneered the first AGA approved power flue system in

2004. Prior to its development, open fronted gas fires were restricted

to using a vertical flue, which prevented installations in many situations

such as ground floors in 2 storey homes or apartments. The power

flue enables the installation of open fronted gas fireplaces in virtually

any situation with a horizontal flue run of up to 13.5m incorporating

up to four 90 degree bends.

The Real Flame power flue system has been used with great success

in many applications including the prestigious Melbourne high rise

development “Royal Domain Tower”.

Power Flue

ConCeived, deSigned, ReSeaRChed, develoPed and Built in auStRalia

These notes must be read in conjunction with AS 5601-2004.

AGA Approval 6094.

NB. Horizontal flue run up to 13.5m incorporating up to four 45º or 90º bends. If your requirement is for a

longer run and or needing more bends submit a detail for our written evaluation.

internal Motor - horizontal termination internal Motor - vertical termination

internal Motor - Rear termination

500mm

Firebox

Firebox

Flue

Minimum 25mm clearancefrom outer flue tocombustible interior

Minimum250mm

100mm x 180mmflue extension if required

150mm x 200mmflue extension if required

Baffle

Termination

Toptermination

Motor320mm

25mm

Minimumdistancefanmotor

200mm

500mm

900mm

Minimum450mm x 450mm

Access panel

If less than 500mm then flue must terminate 500mm above nearest structure

500mm

Firebox

Firebox

Flue

Minimum 25mm clearancefrom outer flue tocombustible interior

Minimum250mm

100mm x 180mmflue extension if required

150mm x 200mmflue extension if required

Baffle

Termination

Toptermination

Motor320mm

25mm

Minimumdistancefanmotor

200mm

500mm

900mm

Minimum450mm x 450mm

Access panel

If less than 500mm then flue must terminate 500mm above nearest structure

Firebox

Baffle

Externalmotor

150mm x 200mmflue extension

150mm x 200mmtwin skin flue (if required)

25mm clearance

340mm

Minimum1290mm

200mm

900mm

Firebox

Minimum clearance250mm

900mm

450mm x 450mmflush termination for motor service access

Firebox

Baffle

150mm x 200mmflue extension

150mm x 200mmtwin skin flue (if required)

150mm x 200mmtwin skin flue - optional

for additional height

25mm clearance

900mm Internalmotor

Internal motor

450mm x 450mmflush termination for motor service access

Baf

fle

Firebox

Baffle

Externalmotor

150mm x 200mmflue extension

150mm x 200mmtwin skin flue (if required)

25mm clearance

340mm

Minimum1290mm

200mm

900mm

Firebox

Baffle

Externalmotor

150mm x 200mmflue extension

150mm x 200mmtwin skin flue (if required)

25mm clearance

340mm

Minimum1290mm

200mm

900mm

Firebox

Minimum clearance250mm

900mm

450mm x 450mmflush termination for motor service access

Firebox

Baffle

150mm x 200mmflue extension

150mm x 200mmtwin skin flue (if required)

150mm x 200mmtwin skin flue - optional

for additional height

25mm clearance

900mm Internalmotor

Internal motor

450mm x 450mmflush termination for motor service access

Baf

fle

Firebox

Baffle

Externalmotor

150mm x 200mmflue extension

150mm x 200mmtwin skin flue (if required)

25mm clearance

340mm

Minimum1290mm

200mm

900mm

external Motor - horizontal termination

Warranty: Your Real Flame gas firebox is unconditionally guaranteed for a period of 10 years, all other parts are guaranteed for 12 months from date of purchase. This warranty does not cover outdoor installations

For detailed specifications visit:

Head Office/Factory/Showroom 1340 Ferntree Gully Rd, Scoresby VIC T: 03 8706 2000

Showrooms 300 Swan St, Richmond VIC T: 03 9428 4443

2a Gordon Ave, Geelong VIC T: 03 5229 0844

654 Pacific Hwy, Chatswood NSW T: 02 8905 0189

36 Kareena Road, Miranda NSW T: 02 8513 6202

173-175 Magill Rd, Norwood SA T: 08 8132 0371

Shop 2/50 James St, Fortitude Valley QLD T: 07 3257 0394

47-53 McDonald St East, Osborne Park WA T: 08 9444 9900

“After analysis of various products available to us Becton East Melbourne Constructions awarded

Real Flame for the supply of gas fireplaces for the One East Melbourne Project.”

Paul McIntyreProject Manager

“Real Flame’s commitment to excellence and can do attitude was exactly what we needed for a high quality project such as 150 Clarendon Street.”

Martin Allen Associate Director

“The reliability of Real Flame technical advise and general service has been invaluable, from design right through to final installation.”

Jon FriedrichJon Friedrich Architect