10
Classic Line at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY www.elcoman.it TECHNICAL DATA 2019

Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

Classic Line at a glance

Classic Line ShreddersGuillotines

and Trimmers

MADE IN ITALY

www.elcoman.it

TECHNICAL DATA 2019

Page 2: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

4

CYCLONE SYSTEMKOBRA CYCLONEBlades rotating at a very high speed, combined with the power of a turbine providing the unit with an air flow, allow the shredding of up to 500 sheets of paper at a time as -well as the shredding of many other types of materials into 5 different available particle sizes

HYBRID POWER MANAGEMENT SYSTEM

technology utilizes stored energy during each and every shredding cycle to improve efficiency, performance and to disconnect the machine from power supply.

KOBRA COMPACTOR C-500Special Cyclone optional compresses and reduces the volume of the shred-ded paper by 4 to 5 times to minimize the space required for disposal.

CHAIN DRIVESUPER POWER POTENTIAL SYSTEMSturdy steel gears and metal chain drive system which offer reliability and resistance to wear

SUPE

R POT

ENTIAL POWER SYSTEM

HYBR

ID TECHNOLOGY

ENERGY SMART®Stand-by power saving mode after 8 seconds of no use.

EN

ERGY SMART

ENVIRONMENTALLY FRIENDL

Y

TURBO BOOST SYSTEM By pressing the Turbo switch the shredding capacity of the machine is increased by 30%. Unbelievable shredding power up to 52 sheets of paper in one pass (Kobra 240 Turbo)

TURB

O BOOST SYSTEM

EXTRA SHREDDING CAPACITY

THROW & SHRED SYSTEMAutomatic feeding system for shred-ding crumpled paper (Kobra+3 CC4 and Kobra 400 WB series)

THRO

W AND SHRED SYSTEM

OIL-FREEExclusive Oil-Free system. No need of lubrication and maintenance of cutting blades (Kobra AF.1 C4 and AF+1)

OIL F

REE SYSTEM

AUTOFEEDERExclusive high speed automatic auto-feeder system for the shredding of large volumes of documents

AUTO-FEEDER

24 HOUR CONTINUOUS DUTYContinuous shredding 24 hours a day without overheatings and duty cycles

AUTOMATIC REVERSE SYSTEMComes on when too much material is inserted into the shredder to prevent jamming

24 H

OUR C

ONTINUOUS DUTY MOTOR

NO OVERHEATING

AUTO

MATIC REVERSE

100% JAM PROOF

AUTOMATIC OILERKOBRA cross-cut and High Security shredders can be fitted with a built-in automatic oiling system, with an Oil Warning light. This system eliminates the need of manual oiling of cutting knives

AUTO

MATIC OILING SYSTEM

METAL DETECTION SYSTEMStops the machine when large metal objects, which could cause a damage to the cutting knives, are accidentally inserted

MET

AL DETECTION SYSTEM

SHRED GUARD

CY

CLONE SYSTEM

WITH THE POWER OF A TURB

INE

WITH THE POWER OF A TURB

INE

CO

MPACTOR C-500

CLASSIC LINEQuality and Professional

The highest shredding and security performances with the widest choice ever of shredding solutions

Page 3: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

Classic Line Kobra AF+1 Kobra AF.1

Model 40 l 60 l C2 C4

Throat width / mm 240 260

Shred size / mm 3,5x40 1,9x15 3,9x40

Sheet capacity* / A4/70gr 10/12 350 7/8 350 9/11 350

Sheet capacity* / A4/80gr 9/11 300 6/7 300 10/12 300

Security Level ISO/IEC 21964 (DIN 66399) P-4 P-5 P-4

Shreddable Material

Credit Card T-4 T-5 T-4

Smart Card E-3 E-4 E-3

CD/DVD/BluRayDisc

Micro-Film/FOIL F-1 F-2 F-1

Floppy Disk

Memory Stick

ENERGY SMART® management system

Speed** / m/s 13 sheets/min 26/37 sheets/min

Noise level / dba 55 58

Waste Bin/Bag Volume / l 40 60 135

Voltage / V/50-60Hz 230 230

Power / Watt 250 600

Automatic Oiler OIL-FREE OIL-FREE

Automatic Start Stop (S=Sensor) (E=Electronic Eyes) E E

Safety Stop for Open Door/Bin Out with light signal

Safety Stopfor Bag/Bin Full with light signal

24 H Continuous Duty Motor

Motor Thermal Protection

Automatic Reverse

Weight / Kg 24 28 48 46

Dimensions

Width / cm 39 39 53

Depth / cm 36 36 43

Height / cm 64 83 98

Top Shelf

Waste Bags

*Capacity varies on supply power, weight, quality and grain of paper, operating temperature and blade lubrication**Speed calculated at 60 Hz as knife outside diameter x rpm

Paper.............. PCD / DVD........O

Floppy............. TCredit Card....T

Smart Card... EUSB................. E

Film................. FLegend ISO/IEC 21964 (DIN 66399)

autofeed level p-4/p-5shredders

Kobra C1

Kobra Kobra +1

C1 Hybrid Hybrid-S SS4 SS6 SS7 CC4

230 230 230

3,5x40 3,5x40 3,8 5,8 7,5 3,5x40

8/9 8/9 12/14 17/19 23/25 25/27 12/14

7/8 7/8 10/12 15/17 20/22 22/24 10/12

P-4 P-4 P-4 P-2 P-2 P-1 P-4

T-4 T-4 T-4 T-2 T-2 T-2 T-4

E-3 E-3 E-3 E-2 E-2 E-2 E-3

O-2 O-2 O-1

F-1 F-1 F-1 F-1

0,035 0,035 0,025 0,035

53 53 55 55

18 30 38,5

230 230 230 230

170 170 250 250

S S E

7 8 9 12

34 37 39

20 26 30

50 50 59

personal and deskside level p-1/p-2/p-4 shredders

ENERGY SMART®

Management system for power saving stand-by mode

ENERGY SMART

ENVIRONMENTALLY FRIENDL

Y

Page 4: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

Kobra +2 Kobra +3

SS4 SS7 CC2 CC4

230 230

3,8 7,5 1,9x13 3,5x40

17/19 25/27 7/8 12/14

15/17 22/24 5/7 10/12

P-2 P-1 P-5 P-4

T-2 T-2 T-5 T-4

E-2 E-2 E-4 E-3

O-2 O-1 O-1 O-1

F-2 F-1

0,025 0,035 0,035

55 55

38,5+1,5 38,5+1,5

230 230

250 250

E E

12 14 13

39 39

30 30

59 59

small/medium office level p-2/p-3/p-4/p-5 shredders

Kobra 240.1

S2 S4 S5 C2 C4

240

1,9 3,8 5,8 1,9x15 3,5x30

13/15 24/26 29/31 10/12 15/17

11/13 20/22 25/27 9/11 13/15

P-3 P-2 P-2 P-5 P-4

T-3 T-2 T-2 T-5 T-4

E-2 E-2 E-2 E-4 E-3

O-2 O-2 O-3

F-2 F-1

T-2 T-2

0,09 0,07

55 61

40

230

500

E

24 25

40

36

64

Kobra 240

SS2 SS4 SS5 C2 C4

240

1,9 3,8 5,8 1,9x15 3,5x30

13/15 24/26 27/29 10/12 13/15

11/13 20/22 22/24 9/11 12/14

P-3 P-2 P-2 P-5 P-4

T-3 T-2 T-2 T-5 T-4

E-2 E-2 E-2 E-4 E-3

O-2 O-2

F-2 F-1

T-2 T-2

0,09 0,07

55 61

35

230

460

E

16 15

37

33

56

Straight-cutmodel S2 I S4 I S5

Cross-cutmodel C2 I C4

High Securitymodel HS I HS-6

Page 5: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

7

Kobra 240 Turbo

SS4 T SS5 T C2 T C4 T

240

3,8 5,8 1,9x15 3,5x30

28/30 50/52 17/19 24/26

25/26 40/44 14/16 19/21

P-2 P-2 P-5 P-4

T-2 T-2 T-5 T-4

E-2 E-2 E-4 E-3

O-2 O-2 O-3

F-2 F-1

T-2 T-2 T-4

0,09 0,035 0,028 0,028

55 61

35

230

460

E

12 14

37

33

56

medium office level p-2/p-3/p-4/p-5 shredders

Kobra 260.1

S2 S4 S5 C2 C4

260

1,9 3,8 5,8 1,9x15 3,5x30

14/16 26/28 29/31 10/12 15/17

12/14 22/24 25/27 9/11 13/15

P-3 P-2 P-2 P-5 P-4

T-3 T-2 T-2 T-5 T-4

E-2 E-2 E-2 E-4 E-3

O-2 O-2 O-3

F-2 F-1

T-2 T-2

0,1 0,06 0,1 0,1 0,07

55 61

60

230

500

E

28 29

40

36

84

Kobra 260

S2 S4 S5 C2 C4

260

1,9 3,8 5,8 1,9x15 3,5x30

14/16 26/28 29/31 10/12 15/17

12/14 22/24 25/27 9/11 13/15

P-3 P-2 P-2 P-5 P-4

T-3 T-2 T-2 T-5 T-4

E-2 E-2 E-2 E-4 E-3

O-2 O-2

F-2 F-1

T-2 T-2

0,1 0,06 0,1 0,07

55 61

85

230

460

option option

E

26 30

43

31

83

www.elcoman.it

Page 6: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

Classic Line Kobra 300.1 Kobra 300.2

Model S4 S5 C2 C4 S4 S5 C2 C4

Throat width / mm 310 310

Shred size / mm 3,8 5,8 1,9x15 3,9x40 3,8 5,8 1,9x15 3,9x40

Sheet capacity* / A4/70gr 27/29 30/32 12/14 20/22 31/33 37/40 16/18 25/27

Sheet capacity* / A4/80gr 22/24 24/26 10/12 18/20 27/29 33/35 14/15 23/25

Security Level ISO/IEC 21964 (DIN 66399) P-2 P-2 P-5 P-4 P-2 P-2 P-5 P-4

Shreddable Material

Credit Card T-2 T-2 T-5 T-4 T-2 T-2 T-5 T-4

Smart Card E-2 E-2 E-4 E-3 E-2 E-2 E-4 E-3

CD/DVD/BluRayDisc O-2 O-2 O-3 O-2 O-2 O-3

Micro-Film/FOIL F-2 F-1 F-2 F-1

Floppy Disk T-2 T-2 T-2 T-2 T-4

Memory Stick

ENERGY SMART® management system

Speed** / m/s 0,06 0,07 0,06 0,07 0,09 0,07

Noise level / dba 55 61 60 61

Waste Bin/Bag Volume / l 110 135

Voltage / V/50-60Hz 230 230

Power / Watt 600 900

Automatic Oiler

Automatic Start Stop (S=Sensor) (E=Electronic Eyes) E E

Safety Stop for Open Door/Bin Out with light signal

Safety Stopfor Bag/Bin Full with light signal

24 H Continuous Duty Motor

Motor Thermal Protection

Automatic Reverse

Weight / Kg 37 38 44 45

Dimensions

Width / cm 53 53

Depth / cm 43 43

Height / cm 92 100

Top Shelf

Waste Bags

Kobra 300 Kobra 385

SS4 SS5 CC2 CC4 SS4 C2 C4

300 385

3,8 5,8 1,9x15 3,5x30 3,8 1,9x15 3,9x40

32/34 42/46 16/18 22/24 27/29 14/15 24/26

28/30 37/39 14/15 20/22 25/27 13/14 22/24

P-2 P-2 P-5 P-4 P-2 P-5 P-4

T-2 T-2 T-5 T-4 T-2 T-5 T-4

E-2 E-2 E-4 E-3 E-2 E-4 E-3

O-2 O-2 O-3 O-2 O-3

F-2 F-1 F-2 F-1

T-2 T-2

0,09 0,1 0,07 0,07

60 61 55 61

85 130

230 230

920 (2 motors x 460 each) 920 (2 motors x 460 each)

option

E E

33 34 38 45

43 58

31 35

83 85

medium office level p-2/p-4/p-5 shredders

ENERGY SMART®

Management system for power saving stand-by mode

ENERGY SMART

ENVIRONMENTALLY FRIENDL

Y

Page 7: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

high security level p-6/p-7 shredders

Kobra 390 Kobra 400

S5 C4 S5 C2 C4

400 400

5,8 3,9x40 5,8 1,9x15 3,9x40

45/47 31/33 60/62 29/31 44/48

43/45 29/30 52/54 25/27 40/42

P-2 P-4 P-2 P-5 P-4

T-2 T-4 T-2 T-5 T-4

E-2 E-3 E-2 E-4 E-3

O-2 O-3 O-2 O-4 O-3

F-1 F-2 F-1

T-2 T-4 T-2 T-5 T-4

E-2 E-4 E-3

0,09 0,12

60 62 60 61 68

200 200

230 230

1.500 (2 motors x 750 each) 2.100

option option

E E

73 77 95 101 95

60 60

48 48

93 93

• •

multiple-user heavy duty level p-2/p-4/p-5 shredders

Kobra 240.1 Kobra 240 Kobra 260.1 Kobra 260

HS HS-6 HS HS-6 HS HS-6 HS HS-6

240 240 260 260

0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5

6/8 4/5 6/8 4/5 6/8 4/5 6/8 4/5

5/6 3/4 5/6 3/4 5/6 3/4 5/6 3/4

P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7

F-3 F-3 F-3 F-3

0,07 0,07 0,07 0,07

61 61 61 61

40 35 60 85

230 230 230 230

500 460 500 460

option

E E E E

28 19 32 33

40 37 40 43

36 33 36 31

64 56 84 83

Kobra 400 WB

400

3,9X40

44/48

40/42

P-4

T-4

E-3

O-3

F-1

T-4

E-3

0,12

65

200

230

2.100

E

132

60

48

163

centralized level p-4 shredder

Page 8: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

Kobra 300.2 Kobra 300 Kobra 260 HS2 Kobra 400

HS HS-6 HS HS-6 HS HS-6 HS HS-6

310 300 260 400

0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5

9/11 5/6 10/12 5/6 11/13 5/6 17/19 8/10

8/9 4/5 9/11 5 10/11 5 13/15 8/9

P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7

F-3 F-3 F-3 F-3

0,07 0,08 0,1 0,12

61 61 59 60

135 85 85 200

230 230 230 230

900 920 (2 motors x 460 each) 700 (2 motors x 350 each) 2.100

option option

E E E E

48 38 51 112

53 43 50 60

43 31 38 48

100 83 85 93

option option

www.elcoman.it

Classic Line

Model

Throat width / mm

Shred size / mm

Sheet capacity* / A4/70gr

Sheet capacity* / A4/80gr

Security Level ISO/IEC 21964 (DIN 66399)

Shreddable Material

Credit Card

Smart Card

CD/DVD/BluRayDisc

Micro-Film/FOIL

Floppy Disk

Memory Stick

ENERGY SMART® management system

Speed** / m/s

Noise level / dba

Waste Bin/Bag Volume / l

Voltage / V/50-60Hz

Power / Watt

Automatic Oiler

Automatic Start Stop (S=Sensor) (E=Electronic Eyes)

Safety Stop for Open Door/Bin Out with light signal

Safety Stopfor Bag/Bin Full with light signal

24 H Continuous Duty Motor

Motor Thermal Protection

Automatic Reverse

Weight / Kg

Dimensions

Width / cm

Depth / cm

Height / cm

Top Shelf

Waste Bags

high security level p-6/p-7 shredders

Kobra 300.1

HS HS-6

310

0,8x9,5 0,8x5

8/10 4/5

7/8 3/4

P-6 P-7

F-3

0,07 0,08

61

110

230

600

E

38

53

43

92

Page 9: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

ISO/IEC 21964 (DIN 66399) Security Levels & Data Carrier Classification

P

Data in Original Size on: Paper, Printout, films, printing plates etc.

P-1 Stripe width max 12mmP-2 Stripe width max 6mm

P-3 Cross Cut < 320mm2

P-4 Cross Cut < 160mm2

P-5 Cross Cut < 30mm2

P-6 Cross Cut < 10mm2

P-7 Cross Cut < 5mm2

0

Data on Optical Carriers: CDs, DVDs etc.

O-1 Cross Cut < 2000mm2

O-2 Cross Cut < 800mm2

O-3 Cross Cut < 160mm2

O-4 Cross Cut < 30mm2

O-5 Cross Cut < 10mm2

O-6 Cross Cut < 5mm2

O-7 Cross Cut < 0,2mm2

T

Data on Magnetic Carriers: Credit Cards, Floppy Disks, ID Cards, Magnetic Tape Cassettes, etc.

T-1 mechanically inoperableT-2 Cross Cut < 2000mm2

T-3 Cross Cut < 320mm2

T-4 Cross Cut < 160mm2

T-5 Cross Cut < 30mm2

T-6 Cross Cut < 10mm2

T-7 Cross Cut < 2,5mm2

E

Data on electronic data carriers: Memory Sticks, Chip cards, Semiconductor Hard Drives, mobile communication media, etc.

E-1 mechanically/electronically inoperableE-2 Split

E-3 Cross Cut < 160mm2

E-4 Cross Cut < 30mm2

E-5 Cross Cut < 10mm2

E-6 Cross Cut < 1mm2

E-7 Cross Cut < 0,5mm2

F

Reduced size data on: micro-films and foils

F-1 Cross Cut < 160mm2

F-2 Cross Cut < 30mm2

F-3 Cross Cut < 10mm2

F-4 Cross Cut < 2,5mm2

F-5 Cross Cut < 1mm2

F-6 Cross Cut < 0,5mm2 F-7 Cross Cut < 0,2mm2

H

Data on Hard Disks (with magnetic data carriers)

H-1 mechanically/electronically inoperableH-2 damaged

H-3 deformedH-4 Cross Cut < 2000mm2

H-5 Cross Cut < 320mm2

H-6 Cross Cut < 10mm2

H-7 Cross Cut < 5mm2

Authorized Dealer

CT-

158

/ 08

/ 1

0.12

.201

8

UNI EN ISO 9001:2015 Cert. No. 9105.EL16

ISO 9000 REGISTERED QUALITY COMPANY

Technical Data as of 11/2018Specifications in this publication are subject to change without notice

Via Gorizia, 920813 Bovisio Masciago (MB), ItalyTel +39 0362 593584Fax +39 0362 [email protected]

products are built with the highest quality materials according to ISO 9001:2015 Standards

Guillotines and Trimmers are built according to Safety Standards BS 5498 (British Standards).

Page 10: Classic Line Shredders Classic Line at a glance and Trimmers · at a glance Classic Line Shredders Guillotines and Trimmers MADE IN ITALY ... DDI N G C P A C I T Y THROW & SHRED SYSTEM

Kobra 300 Kobra 385

SS4 SS5 CC2 CC4 SS4 C2 C4

300 385

3,8 5,8 1,9x15 3,5x30 3,8 1,9x15 3,9x40

32/34 42/46 16/18 22/24 27/29 14/15 24/26

28/30 37/39 14/15 20/22 25/27 13/14 22/24

P-2 P-2 P-5 P-4 P-2 P-5 P-4

T-2 T-2 T-5 T-4 T-2 T-5 T-4

E-2 E-2 E-4 E-3 E-2 E-4 E-3

O-2 O-2 O-3 O-2 O-3

F-2 F-1 F-2 F-1

T-2 T-2

0,09 0,1 0,07 0,07

60 61 55 61

85 130

230 230

920 (2 motors x 460 each) 920 (2 motors x 460 each)

option

E E

33 34 38 45

43 58

31 35

83 85

Kobra SSD

SSD SSD-HS

240x25

10X8-15 Sand like texture particles

-

-

-

T-4 Similar toT-7

E-3 Similar toE-7

O-3 Similar toO-7

T-4 Similar toT-7

E-3 Similar toE-7

0,18 Up to 40 Kg/h

variable

75 35

220 380/400 - 3 phases + neutral

2.000 5.000

Manual Start & Stop

280 500

103

82

121

commercial high security disintegrator

Kobra CYCLONEKobra COMPACTOR

C500

325x220 (wxh) -

See CYCLONE brochure

500 -

See CYCLONE brochure

45.000 x hour

7.000 x hour

15.000 x hour

7.000 x hour

Up to 420 Kg. per hour Theoretical output

75/85

400

380/400 - 3 phases + neutral

6.000 2.200

Manual StartAutomatic Stop

AutomaticStart & Stop

440 220

80 110

212 60

210 148

industrial shredder

Kobra 400 OM Kobra 400 COMBI

HS OM HS HS-6

130 240 Paper +130 CD/DVD

1,5x2,5 0,8x9,5 0,8x5

17/19 8/10

13/15 8/9

Top Secret P-6 P-7

T-6 T-6

E-5 E-5

O-6 O-6

F-3

T-6 T-6

0,15 0,15

60 60

80 110+80 110+80

230 230

2.100 2.100

E E

101 112

60 60

48 48

93 93

high security level p-6/p-7 shredders

Specifications in this publication are subject to change without notice

shredders are built according to CE standard and carry the most International recognized safety marks

and ENERGY SMART®

are registered trademarks