PRODUCT DESCRIPTION: Classic ® Extreme Ear Muffs, blue, padded foam headband, pivoted ABS ear cups, NRR 24 dB. • Soft foam ear cushions for all-day comfort; • Padded foam headband rests comfortably on the head; • Durable Acylonitrile Butadiene Styrene (ABS) ear cups pivot for a comfortable fit; • 2-Point cup suspension ensure even pressure and a good seal against noise; • NRR of 24 dB for greater protection in noisier environments. Applications: Ideal for use around loud work environments to reduce the impact of high decibel noise such as airports, excavation equipment, generators and high frequency welders. CLASSIC ® EXTREME EAR MUFFS BARCODE # EACH CASE 261-AER110-50 5038428119207 5038428811439 TECHNICAL DATA: Material: Ear Muff: ABS cups, wire head band. Open Cell Foam Inserts: PVC covered open cell foam pads, PVC covered head band cover. Color: Blue & black Available Sizes: One size fits all Packaging: 1 pair per box; 15 per case Case Weight: 16 lbs / 7.25 kg Country of Origin/Harmonization Code: China/3926.90.9880 Cleaning & Maintenance: The ear muffs may be cleaned with soap and warm water and dried with a soft cloth. The ear muffs should not be cleaned with chemical or abrasive cleaners. Store out of direct sunlight, away from chemicals and not exposed to extremes of temperature. CONFORMITY: Conforms to EN 352-1 and ANSI S3.19-1974 SNR = 30 dB NRR = 24 dB This document is the property of PIP and the information contained herein is proprietary to PIP. DIMENSIONS: Size available - One size Ear Muff Cup Open Area: 40 mm x 65 mm / 1.57 in x 2.56 in Weight: 0.23 kg / 8 oz. INSTRUCTIONS FOR USE: Fully extend the headband. Fit the cups over the ears. Slide the headband down until it touches the head. Limitations of Use: Protection will only be offered if the ear muff is fitted correctly. Ear pads may deteriorate with use and should be examined at frequent intervals. Do not apply paint, solvents, adhesives or self-adhesive labels, except in accordance with instructions from the manufacturer. The ear pads, when in contact with the skin may cause allergic reactions to susceptible indi- viduals. If this occurs leave the hazard area, remove the ear defender and seek medical advice. Notes: • If the ear muff is to be worn for long periods the noise level must be reduced to 80 dB. Before selection of a suitable ear muff a noise survey should be carried out. • Eyewear frames and hair between the ear pads and the head may affect the performance of the ear muff.

CLASSIC EXTREME EAR MUFFS...Ear Muff Cup Open Area: 40 mm x 65 mm / 1.57 in x 2.56 in Weight: 0.23 kg / 8 oz. INSTRUCTIONS FOR USE: Fully extend the headband. Fit the cups over the

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Applications: Ideal for use around loud work environments to reduce the impact of high decibel noise such as airports, excavation equipment, generators and high frequency welders.

CLASSIC® EXTREME EAR MUFFS

BARCODE # EACH CASE

261-AER110-50 5038428119207 5038428811439

TECHNICAL DATA:Material: Ear Muff: ABS cups, wire head band.Open Cell Foam Inserts: PVC covered open cell foam pads, PVC covered head band cover.Color: Blue & blackAvailable Sizes: One size fits allPackaging: 1 pair per box; 15 per case Case Weight: 16 lbs / 7.25 kgCountry of Origin/Harmonization Code: China/3926.90.9880

Cleaning & Maintenance:The ear muffs may be cleaned with soap and warm water and dried with a soft cloth. The ear muffs should not be cleaned with chemical or abrasive cleaners. Store out of direct sunlight, away from chemicals and not exposed to extremes of temperature.

CONFORMITY:Conforms to EN 352-1 and ANSI S3.19-1974SNR = 30 dBNRR = 24 dB

This document is the property of PIP and the information contained herein is proprietary to PIP.

DIMENSIONS:

Size available - One sizeEar Muff Cup Open Area: 40 mm x 65 mm / 1.57 in x 2.56 in

Weight: 0.23 kg / 8 oz.

INSTRUCTIONS FOR USE:Fully extend the headband. Fit the cups over the ears. Slide the headband down until it touches the head.

Limitations of Use:Protection will only be offered if the ear muff is fitted correctly. Ear pads may deteriorate with use and should be examined at frequent intervals. Do not apply paint, solvents, adhesives or self-adhesive labels, except in accordance with instructions from the manufacturer. The ear pads, when in contact with the skin may cause allergic reactions to susceptible indi-viduals. If this occurs leave the hazard area, remove the ear defender and seek medical advice.

Notes:• If the ear muff is to be worn for long periods the noise level must be reduced to 80 dB. Before selection of a suitable ear muff a noise survey should be carried out.• Eyewear frames and hair between the ear pads and the head may affect the performance of the ear muff.