Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
CLmFactory Produclion Contr8l
:t7'
TWI Certification Ltd, Granta Park, Great Abington,Cambridge, CB21 6AL, United Kingdom
Certificate of Conformity of the Factory Production Control
2400-cPR-202000081in compliance with the Regulation (EU) No 305/2011 of The Europeon Porlioment and of the council of 9 March 2011 ltheConstruction Products Regulation or CPR) this certificate applies to the construction product(s)
The monulocture of light to heovy fabricoted metal components
for various industries including service / repoir ond installotion
ploced on the morket under the nome or trode mark of:
Afon Engineering LimitedCamffrwd Woy
Swanseo Vale Business ParkMorristonSwanseo
SA5 8QD
ond produced in the manufacturing plant(s)
Comffrwd Way
is submitted by the manufacturer to the initial type-testing ofthe product, a factory production control and to the further testing ofsamples taken at the factory in accordance with the prescribed test plan and that the notified body No. 2400 TWI Certification Ltd
has performed the initial inspection of the factory and of the factory production control and performs the continuous surveillance,assessment and approval of the factory production control.
This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in
Annex ZA of the standard EN 7090-7:2009+A1: 2077 under AVCP system 2+ and method of declaration Method 3a is applied and
that the factory production control is assessed to be in conformity with the applicable requirements. This certificate was first issued
on 1,L May 2020 and will remain valid until 30 April 2023 as long as neither the harmonised standard, the construction products,
the AVCP methods, nor the manufacturing conditions in the plant are modified significantly, unless suspended or^withdrawn by thenotified factory production control certification body.
Fi rst lssu e Dalei tl / 05 / 2O2O
Current lssue Date: 11105/2020Date of Expiry : 3O / 04 / 2023
The validity of the certificate may be confirmed at the web address: www.en1090cert.ors
Scheme Manager
mFaclory Production Conlrol
I CLTWI Certification Ltd, Granta Park, Great Abington,
Cambridge, CB21 6AL, United Kingdom
Sch e d u I e fo r 2400-CPR- 2020008 7
This Schedule is an Annex to the Certificote of conformity 2+ of the Foctory Production Control (FPC)
2400 CPR-20200081 in compliance with EN1090-1:2009 Annex B - Toble 8.1. lt is hereby stoted thot
Afon Engineering LimitedComffrwd Way
Swonseo Vale Business ParkMorristonSwonseo
5A6 8QD
Covers Execution Closs EXC4 under
Under the responsibility of the Welding Coordinator:
Mr Gareth Joyce EngTech TechWeldl, CSWIP 3.1 Welding lnspector, TWI Diploma in Welding, for EXC4.
(Quality according to EN lSo 3834 - 2, welding coordination according to EN ISO L473L). T$-rs is the weldingcertificate referred to in EN 1090-1, Annex B, Table 8.1).
EN 7090-7, EN 1090-2 & EN 1090-3 with the ses occordinq to EN lso 4063:
Welding process(tso 4063)
Porent moterial groups (CEN
tso/TR 15608)
Thickness ronge buttwelds
Thickness range fillet weld
MMA (111) Group 1 N/A 7.5mm - 30mm
sAW (121)Group 7 3mm - 60mm N/A
Group 8 3mm - 64mm N/A
MtG (131) Group 22 3mm- 16mm 3mm-40mm
MAG (1is)
Group 1 3mm - 60mm
>5mm
Group 23mm - 6mm
Group 3
Group I imm-75mm
FCAW (1s6)Group 7 3mm-60mmGroup 2
23.5mm - 94mmGroup 3
flG (141)Group 7 3mm - 40mm
Group 223mm - 24mm
Group 2j
Holing Materiol Thickness Ranqe
Drill Group 7 70mm - 75mm
Cuttinq Methods Moteriol Thickness Ronqe
PlasmaGroup 7
70mm - 40mm
Oxy-Fuel 70mm- 700mm
First lssue Datet Iu05/2020Current lssue Date: LL/O\|2OLO
Date of Expiry : 30 / 04/ 2023
The validity of the schedule may be confirmed at the web address: www.en1090cert.ors
Freckingharir.
Scheme Manager