Upload
others
View
99
Download
11
Embed Size (px)
Citation preview
CIVIL WORKS As per APWD SOR 2013-14 Specification
Sl.No.
DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
MANUALLY DRIVEN R.C.C. PILE
1
Providing cast in-situ manually driven reinforced cement concrete piles of using required grade of cement concrete of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings. Reinforcement to be measured and paid seperately as per item no. 21.4.1
C) UNIFORM PILE
d) Pile Dia 400 mm
ii) Above 10 M Rm 12180.00
LOAD TEST ON PILES
2
Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)
Ton 60.00
REINFORCEMENT
2
Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc)
(A) TMT bar made of Primary producer (From Primary producer)
Qtl 1552.36
EARTHWORK IN EXCAVATION
3
Earthwork in excavation for foundations, trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, braking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lift as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.
(A) Upto a depth of 2.00m below the existing ground level.
(a) In ordinary soil Cum 820.65
DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.
(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.
Ground Floor Area 4190 sqm x .9 m plinth Cum 2950.35
PLAIN CEMENT CONCRETE WORKS
4
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).
(b) In prop 1cement: 4 sand :8 coarse aggregate by volume
cum 102.58
Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete.
c) 100mm thick sqm 4,910.00
Plinth Area = 4910 sqm.
Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.
sqm 479.475
Total length of wall =1917.9m x .250 m
REINFORCED CEMENT CONCRETE WORKS
9
Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)
(I) Using Mixer Machine
(A) In substructure up to plinth level
SL.NO
DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
10
Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.
b) M20 grade concrete or Prop. 1:1.5:3 cum 1203.084
(B) In super structure from plinth level up to 1st floor level.
11
i) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc.
N) Without using admixture, plasticiser
b) M20 grade concrete or Prop. 1:1.5:3 cum 32.319
12
ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.
N) Without using admixture, plasticiser
b) M20 grade concrete or Prop. 1:1.5:3 cum 3075.576
13
iii) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band.
N) Without using admixture, plasticiser
b) M20 grade concrete or Prop. 1:1.5:3 cum 177.936
TIMBER SHUTTERING (FORMWORK)
14
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:
Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.
(b) Using 25mm thick plank Sq.m
1352.96
Form work in Pile capa. 3 pile cap → 6 x .8 x 86 = 412.8b. 4 pile cap → 7.6 x .8 x 71 = 431.68c. 5 pile cap → 8.54 x .8 x 35 = 239.12d. 6 pile cap → 9.62 x .8 x 35 = 269.36
12
Sides of tie beams, grade beams etc. at or below ground level.
ii. Using 25mm thick plank Sq.m
2301.48
→ 2 x 1917.9 x 0.600
SL.NO
DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
13 Columns, Pillars, Posts & Strut
ii. Using 25mm thick plank Sq.m
6108.00
Column A → 195 x 12 x 2 (0.400 + 0.700) = 5148 Column B → 32x 12 x 2 (0.450 + .800) = 960
14
Sides and soffits of beams, beam haunchings , cantilever giders , bressumers , lintels and horizontal ties.
(ii)Using 25mm thick plank Sq.m
7671.60
→ 2 x 1917.9 x 0.200 = 703.72 → 2 x 1917.9 x 0.600x3 = 6333.48
15
Formwork Flat surfaces such as soffits of suspended floors , roofs landing , cantilaever slabs chajjas , balconies and like
(ii)25mm thk. plank Sq.m 7576.00
a. 1st slab level→ 3045 b. 2nd slab level→ 3590 c. 3rd slab level→ 3156-221.5
16
Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)
Sq.m 197.89
Stair case → Waist slab = 3.35 x 4.06 x3 x 2 = 81.6 Step = 3.40 x 0.150 x 24 x3 x2 = 73.44 Landing = 3.40 x 1.50 x3 x2= 30.6 Beam = 2 x 3.40 x 0.300 x3x2 = 12.24
MASONARY WORK
3
Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade as directed including all labour and materials and if necessary dewatering complete.
(a)Brick on flat soiling. Sq.m 4190.00
Ground floor Area = 4190 sqm.
Autoclaved Aerated Cement blocks work (AAC)
4
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineerin- Charge. (The payment of RCC band and reinforcement shall be made for seperately).
DESCRIPTION OF ITEMS
UNIT QUANTIT
Y
Unit rate offered
Total amount(in INR)
Unit rate offered in words
Total amount offered in words
(i) In Sub-structure upto plinth level including dewatering if necessary Cum 132.34
Total length of wall =1917.9 m x (.900-.600) m x .200m
(ii)In Superstructure above plinth level upto 1st floor level.
Cum 589.77
Extra for AAC block walling of each subsequent floor or part therof above the 1st floor level. Cum 326.33
PLASTERING WORKS
17
15 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.
Sq.m 5128.40
Wall area → 3485.53 X 2= 6971.06
18
12 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.
Sq.m 5128.40
19
10mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering upto 3rd floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.
(d) In cement mortor 1:6 Sq.m 18529.33
Ceiling area =9791 sqm RCC Fin =1780 x 2=3560 Slab Beam area = 1917.9x0.45 x2x3=4749.3 sqm
HERITAGE FINISHING
Supplying and laying of permanent wall finish for interior and exterior walls with surface coating of Heritage Surface Texture of Bakelite Hylam Limited for all types of buildings at all levels as specified and directed by the department.
(a) Granules (Code : HGR) Sqm 638.28
=(17.5+14.5+14.5+12.6) X 3.6 X3
PAINTING AND FINISHING
20
Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem “Rakshak” brand of required shade by thinning 11ltr. of paint with 750ml of water to give an even shade after thoroughly brooming the surface to remove all dirt and remains of loose powdered materials as specified and directed by the department.
(c) Asian paint / Berger paint / ICI ect. Sq.m 4177.35
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
ground floor → (395-200+68.5) x 4.5 =1185.75 1st floor →( 395 + 68.5) x 3.6 = 1668.6 2nd floor → ( 395 -96 + 68.5) x 3.6 =1323
21
Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac) on new surface to give and even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.
Sq.m 24608.78
Wall area→ (5128.4 X 2)-4177.35+18592.33=24608.78
22
Providing two coats of J.K. wall putty (white cement based putty for concrete /mortar walls and ceiling both internal And external) after removing all loosely Adhering materials from the wall surface With the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coates is maximum 1.5mm).
Sq.m 28786.13
PAINTING ON WOOD AND WOOD WOOD BASED SURFACES
Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting.
(b). With ready mixed paint , wood primer (white). Sqm 560.00
Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.
(i).Surfaces over 100mm in width or girth.
a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
Sqm 560.00
PAINTING ON STEEL AND OTHER METAL SURFACE
Applying primary coat over new steel and other metal surface upto 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.
A.Roof truss in doom→20.1 x 8=160.8 M B.Roof truss in pargola→(19 x25)+72 =547 M Door frame→ 1178.4
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
a). With ready mixed "red-lead/ red oxide" primer. Rm 1886.2
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.
(ii).Surfaces up to 100mm in width or girth.
a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
Rm 1884.45
A.Roof truss in doom→20.1 x 8=160.8 M B.Roof truss in pargola→(19 x25)+72 =547 M Door frame→ 1178.4
FLOORING
A) ON FLOOR
23
Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
b) Executive range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make
i) Of size 800mmx800mm and above Sq.m 9848.38
Ground Gloor→ 4190-210.5=3979.52 sqm First Floor → 3041-129.58=2911.42 sqm Second Floor → 3156-129.58=2957.44 sqm
B) ON WALLS
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
24
Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).
c) Delux range Somany/ Orient/Nitco/Varmora Make
ii) Of size 300mmx450mm and above Sq.m 1201
WALL TILES→ 95.32 X 2.1X2 X3 =3979.52
ANTISKID TILES
Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.
(A) CERAMIC
i)Normal range (Sizes 300 mm x 300mm and above)
(a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate
Sq.m 538.62
ground floor →210.48 1st floor →129.58 2nd floor → 198.56
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Providing polished SUNROCK-Hi CTS/ MULTIWYN tiles of approved quality, size, shape and thickness not less than 18mm on floors and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department).
(a) SUNROCKHi CTS TILES
i). Well, Chocolate, Diamond Square, Ramp, Beach Sand (300x300) mm Sq.m
19.8
MARBLE FLOORING
25
18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.
(i) Dungri slab Sq.m 221.76
→ 48 x 2.1 x (.4+.4+.7.+.7)= 253.44 SQM
GRANITE FLOORING
Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.
Sq.m 77.76
→ 32 x .45 x 5.4= 253.44 SQM
WOOD WORKS
27 BLOCK BOARD SHUTTERS
Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws.
a) Decorative type face panel and block board core.
(i) 40 mm thick . Sq.m. 560.00
Area of Door→ 560 SQM
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
ALUMINIUM FITTINGS
Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )
a) Sliding door bolts
i) 300mm x 16mm Each 20.00
b) Tower bolts
iii) 200mm x 12mm Each 446.00
c) Door handles
iii) 150mm Each 446.00
l) Hydraulic door closure Each 20.00
m) Mortice lock vertical type
i) 65mm( Godrej With handle(2 lever) set 25.00
t) Door stopper with rubber stopper Each 25.00
ALUMINIUM FRAMIMG WORKS
Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately).
a)Side hung and Top hung windows and ventilators
ii)5mm frosted glass Sqm 12.96
28
Providing, fitting and fixing anodized aluminium sliding windows and ventilators of standard sections approved brand (HINDALCO/NALCO/BALCO/JINDAL/ other equivalent primary producer) without horizontalglazing bars, jointsmitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, Angle cleat, rubber gasket,roller, bolting Device, locking arrangements, servews, etc.as reqd. complete as specified and directed for all levels.
3Track sliding window 5mm clear glass Sq.m 350
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
2Track sliding window5mm clear glass
Sq.m 200
3Track → 350 2Track → 200
PARTITION WALLS WITH DOORS
Providing, fitting and fixing anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring pivot aluminium door handle lock angles cleat etc. complete as directed by the department at all levels.
(i)6mm thick glass panes and 12mm prelaminated board
Sq.m 63.00 a. 10.5 x 3 x2= 63
CURTAIN WALL, CURTAIN GLAZING, STRUCTURAL GLAZING
Providing, fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with coloured anodised aluminium section of approved brand 101mm x 55mm x 2mm by providing jointing angles including providing coloured reflectory type glass 6mm thick fitted with aluminium at all levels.
Sqm 153.36
A. 14.2 X 3.6 X 3 =153.36
Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete etc complete as specified and directed by the department at all levels.
(a) with 12 mm thick toughened glass Sqm 57.6
GYPBOARD CEILING
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
29
Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners.
Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).
(ii)12.5mm thick Sqm 963
Ceiling area → 207+ 117=324 SQM →32 X 9X 2= 576 SQM →13.7 X 4.5= 63 SQM
K STEEL WORKS
ROOF TRUSS
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.
a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997
Qtl 100.90
A.Roof truss in doom→20.1 x 8=160.8 M B.Roof truss in pargola→(19 x25)+72 =547 M
COLLAPSIBLE / ROLLING SHUTTERS
Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.
Sq.m.
25.92
Providing and fixing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together through their entire lenth and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters.
Sq.m.
108
DOOR FRAMES
Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately).
(a) 1.25mm thick sheet
(iv) Size 125mm x 60mm (Double rebate) M 1178.4
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Door Frame → total door =223nos. →(2.1+2.1+1.2) x 137= 739.8 m →(2.1+2.1+.9) x 86= 438.6m
30
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes , channels , plates etc., including welding , grinding , buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete , i.e. fixing the railing with necessary accessories & stainless steel dash fasteners ,stainless steel bolts etc., of required size , on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge. (For payment, only weight of stainless steel member is be considered.No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)
Kg. 486.50
A. → 3.9 X2 X 3X 8=187.2 B. → (39.4+ 27.8)X4=268.8 C. → (11.5+11.5+7.5)=268.8
GRILLS
Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.
I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. Kg 5656.45
→ Total area =550 sqm,10mm sqr bar 150c/c @ 10.29kg/m2= 5656.45 kg
ROOFING
Providing plain Polycarbonate transparent sheet roofing at all levels with self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.)
(iii) 3.00 mm thick Sqm 221.6
PLINTH PROTECTION WORKS
Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished.
Sqm
621
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.
ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. Rm
810
REINFORCEMENT STEEL
31
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details,ying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). ISI approved super ductile TMT Bar
TMT corrosion Resistant. Qtl. 4851.89
COMMERCIAL BUILDING
CIVIL WORKS
Sl.No. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
MANUALLY DRIVEN R.C.C. PILE
1
Providing cast in-situ manually driven reinforced cement concrete piles of using required grade of cement concrete of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings. Reinforcement to be measured and paid seperately as per item no. 21.4.1
C) UNIFORM PILE
d) Pile Dia 400 mm
ii) Above 10 M Rm 3960.00
LOAD TEST ON PILES
Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)
Ton 60.00
REINFORCEMENT
2
Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc)
(A) TMT bar made of Primary producer (From Primary producer)
Qtl 504.71
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
EARTHWORK IN EXCAVATION
4
Earthwork in excavation for foundations, trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, braking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lift as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.
(A) Upto a depth of 2.00m below the existing ground level.
(a) In ordinary soil Cum 236.51
5
Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.
(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.
Ground Floor Area 4190 sqm x .9 m plinth
Cum 681.49
Ground floor Area = 1020 x .9 = 3771 cum.
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
PLAIN CEMENT CONCRETE WORKS
6
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).
(b) In prop 1cement: 4 sand :8 coarse aggregate by volume cum 29.56
7
Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete.
c) 100mm thick sqm 1,020.00
Plinth Area = 1020 sqm.
8
Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.
sqm 150.6
Total length of wall =602.4 m x .250 m= 150.6 sqm
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
REINFORCED CEMENT CONCRETE WORKS
9
Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)
(I) Using Mixer Machine
(A) In substructure up to plinth level
10
Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.
b) M20 grade concrete or Prop. 1:1.5:3
cum 357.57
(B) In super structure from plinth level up to 1st floor level.
11
i) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc.
N) Without using admixture, plasticiser
b) M20 grade concrete or Prop. 1:1.5:3
cum 16.16
12
ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.
N) Without using admixture, plasticiser
b) M20 grade concrete or Prop. 1:1.5:3
cum 786.62
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
13
iii) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band.
N) Without using admixture, plasticiser
b) M20 grade concrete or Prop. 1:1.5:3 cum 24.00
TIMBER SHUTTERING (FORMWORK)
14
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:
Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.
(b) Using 25mm thick plank Sq.m 522.80
Form work in Pile capa. 4 pile cap → 1.9 x 4 x .75 x 28 = 159.6b. 5 pile cap → 2.4x 4 x .75 x 46 = 331.2c. 6 pile cap → (1.9+3.1) x 2 x .8 x 4 = 32
12
Sides of tie beams, grade beams etc. at or below ground level.
ii. Using 25mm thick plank Sq.m 722.88
→ 2 x 602.4x 0.600
13 Columns, Pillars, Posts & Strut
ii. Using 25mm thick plank Sq.m 1684.80
Column A → 39 x 12 x 2 (0.35 + 0.50) = 795.6 Column B → 32x 12 x 2 (0.350 + .600) = 889.2
14
Sides and soffits of beams, beam haunchings , cantilever giders , bressumers , lintels and horizontal ties.
(ii)Using 25mm thick plank Sq.m 2409.60
→ 2 x 602.4 x 0.200 = 703.72 → 2 x 602.4 x 0.600x3 = 6333.48
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
15
Formwork Flat surfaces such as soffits of suspended floors , roofs landing , cantilaever slabs chajjas , balconies and like
(ii)25mm thk. plank Sq.m 2587.68
a. 1st slab level→ 995.02 b. 2nd slab level→ 796.33 c. 3rd slab level→ 796.33
16
Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)
Sq.m 197.89
Stair case → Waist slab = 3.35 x 4.06 x3 x 2 = 81.6 Step = 3.40 x 0.150 x 24 x3 x2 = 73.44 Landing = 3.40 x 1.50 x3 x2= 30.6 Beam = 2 x 3.40 x 0.300 x3x2 = 12.24
MASONARY WORK
3
Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade as directed including all labour and materials and if necessary dewatering complete.
(a)Brick on flat soiling. Sq.m 1020.00
Ground floor Area = 1020 sqm.
Autoclaved Aerated Cement blocks work (AAC)
4
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineerin- Charge. (The payment of RCC band and reinforcement shall be made for seperately).
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
(a) In Sub-structure upto plinth level including dewatering if necessary Cum 41.57
Total length of wall =602.4 m x.300 m x .200m
(ii)In Superstructure above plinth level upto 1st floor level. Cum
321.0948
Extra for AAC block walling of each subsequent floor or part therof above the 1st floor level.
Cum 206.43795
PLASTERING WORKS
17
15 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.
Sq.m 2140.63
Wall area → 2140.63 X 2= 4281.26 SQM
18
12 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.
Sq.m 2140.63
19
10mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering upto 3rd floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.
(d) In cement mortor 1:6 Sq.m 7774.16
Ceiling area =2587.68sqm RCC Fin =1780 x 2=3560 Slab Beam area = 602.4x0.45 x2x3=4749.3 sqm
HERITAGE FINISHING
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Supplying and laying of permanent wall finish for interior and exterior walls with surface coating of Heritage Surface Texture of Bakelite Hylam Limited for all types of buildings at all levels as specified and directed by the department.
(a) Granules (Code : HGR) Sqm 97.2
=9 x3 X 3.6 =97.2 sqm
PAINTING AND FINISHING
20
Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem “Rakshak” brand of required shade by thinning 11ltr. of paint with 750ml of water to give an even shade after thoroughly brooming the surface to remove all dirt and remains of loose powdered materials as specified and directed by the department.
(c) Asian paint / Berger paint / ICI ect. Sq.m 905.40
ground floor →(113x4.5)-(36x3.6)-(1.8x1.5x16)=335.7 1st floor →(113x3.6)-(36x3.6)-(1.8x1.5x16)=234 2nd floor → (113x4.5)-(36x3.6)-(1.8x1.5x16)=335.7
21
Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac) on new surface to give and even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.
Sq.m 11150.02
Wall area → 807.00 Ceiling area → 491.27 Slab beam area → 277.38
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
22
Providing two coats of J.K. wall putty (white cement based putty for concrete /mortar walls and ceiling both internal And external) after removing all loosely Adhering materials from the wall surface With the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coates is maximum 1.5mm).
Sq.m 12055.42
PAINTING ON WOOD AND WOOD WOOD BASED SURFACES
Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting.
(b). With ready mixed paint , wood primer (white).
Sqm 164.52
Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.
(i).Surfaces over 100mm in width or girth.
a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
Sqm 164.52
PAINTING ON STEEL AND OTHER METAL SURFACE
Applying primary coat over new steel and other metal surface upto 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.
A.Roof truss in doom→20.1 x 8=160.8 M Door frame→739.8
a). With ready mixed "red-lead/ red oxide" primer.
Rm 900.6
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.
(ii).Surfaces up to 100mm in width or girth.
a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
Rm 900.6
A.Roof truss in doom→20.1 x 8=160.8 M Door frame→ 739.8
FLOORING
A) ON FLOOR
23
Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
c) Delux range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make
i) Of size 1000mmx1000mm and above
Sq.m
2811.35
→ 1020+995.02+796.33=2811 sqm
B) ON WALLS
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
24
Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).
c) Delux range Somany/ Orient/Nitco/Varmora Make
ii) Of size 300mmx450mm and above Sq.m 364.68
ground floor →(3*2.1*6)+(6.5*2.1*2)-(1.2*.9*4)=60.78 x 2=121.56 sqm 1st floor →121.56 sqm 2nd floor → 121.56 sqm
ANTISKID TILES
Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.
VITRIFIED
i)Normal range (Sizes 300 mm x 300mm and above)
Somany made- Durastone (Unpolished heavy duty Vitrified Tiles)
a). Premium Sq.m 108
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Ground floor →18 x2 = 36 sqm. 1st floor →18 x2 = 36 sqm. 2nd floor → 18 x2 = 36 sqm.
Providing polished SUNROCK-Hi CTS/ MULTIWYN tiles of approved quality, size, shape and thickness not less than 18mm on floors and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department).
(a) SUNROCKHi CTS TILES
i). Well, Chocolate, Diamond Square, Ramp, Beach Sand (300x300) mm
Sq.m
17.28
Ramp → 1.8 x 4.8 x 2=
MARBLE FLOORING
25
18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.
(i) Dungri slab Sq.m 36.18
→ 24 x 3.35 x (0.150+ 0.300)
GRANITE FLOORING
Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.
Sq.m
8.1
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
→ .45 x 3 x 2x 3=
H WOOD WORKS
27 BLOCK BOARD SHUTTERS
Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws.
a) Decorative type face panel and block board core.
(i) 40 mm thick . Sq.m. 164.52
TOTAL AREA OF DOOR
ALUMINIUM FITTINGS
Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )
a) Sliding door bolts
i) 300mm x 16mm Each 72.00
b) Tower bolts
iii) 200mm x 12mm Each 140.00
c) Door handles
iii) 150mm Each 140.00
l) Hydraulic door closure Each 10.00
m) Mortice lock vertical type
i) 65mm( Godrej With handle(2 lever) set 12.00
t) Door stopper with rubber stopper Each 13.00
I ALUMINIUM FRAMIMG WORKS
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately).
a)Side hung and Top hung windows and ventilators
ii)5mm frosted glass Sqm 12.96
28
Providing, fitting and fixing anodized aluminium sliding windows and ventilators of standard sections approved brand (HINDALCO/NALCO/BALCO/JINDAL/ other equivalent primary producer) without horizontalglazing bars, jointsmitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, Angle cleat, rubber gasket,roller, bolting Device, locking arrangements, servews, etc.as reqd. complete as specified and directed for all levels.
3Track sliding window 5mm clear glass Sq.m 399.4
2Track sliding window 5mm clear glass Sq.m 0
3Track → 399.4 2Track → 0
PARTITION WALLS WITH DOORS
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Providing, fitting and fixing anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring pivot aluminium door handle lock angles cleat etc. complete as directed by the department at all levels.
(i)6mm thick glass panes and 12mm prelaminated board
Sq.m 39.00
a. 10.5 x 3 x2= 63
CURTAIN WALL, CURTAIN GLAZING, STRUCTURAL GLAZING
Providing, fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with coloured anodised aluminium section of approved brand 101mm x 55mm x 2mm by providing jointing angles including providing coloured reflectory type glass 6mm thick fitted with aluminium at all levels.
Sqm 289.44
B. 13.4 X 3.6 X3 X2 =289.44
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
GYPBOARD CEILING
29
Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners.
Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
(ii)12.5mm thick Sqm 43.68
Ceiling area →5.6 x7.8= 43.68 sqm
K STEEL WORKS
ROOF TRUSS
Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.
a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 Qtl 25.60
A.Roof truss in doom→20.1 x 8=160.8 M x 15.92/100=25.6 qtl Tata rectangular section 145 x 82mm @15.92 Kg/M
COLLAPSIBLE / ROLLING SHUTTERS
Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. Sq.m. 25.92
Providing and fixing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together through their entire lenth and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters. Sq.m. 108.00
DOOR FRAMES
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately).
(a) 1.25mm thick sheet
(iv) Size 125mm x 60mm (Double rebate) M 351
Door Frame → total door =65 nos. →(2.1+2.1+1.2) x 65= 739.8 m
30
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes , channels , plates etc., including welding , grinding , buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete , i.e. fixing the railing with necessary accessories & stainless steel dash fasteners ,stainless steel bolts etc., of required size , on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge. (For payment, only weight of stainless steel member is be considered.No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)
Kg. 486.50
A. → 3.9 X2 X 3X 8=187.2 B. → (39.4+ 27.8)X4=268.8 C. → (11.5+11.5+7.5)=268.8
GRILLS
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.
I . Plain grill
(c) Fixed to Brickwork/P.C.C/R.C.C. Kg 5656.45 2.16
→ Total area =550 sqm,10mm sqr bar 150c/c @ 10.29kg/m2= 5656.45 kg
ROOFING
Providing plain Polycarbonate transparent sheet roofing at all levels with self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.)
(iii) 3.00 mm thick Sqm 221.60
PLINTH PROTECTION WORKS
Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished.
Sqm 103.50
Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.
ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. Rm 255.00
L REINFORCEMENT STEEL
DESCRIPTION OF ITEMS UNIT
QUANTITY
Unit Rate offered
TOTAL AMOUNT ( in INR )
UNIT RATES OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
31
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details,ying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). ISI approved super ductile TMT Bar
TMT corrosion Resistant. Qtl. 1337.04
INTERNAL ELECTRICAL WORKS
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
1/2.1 Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete.
2.1.1
a) SP upto 3.00 metre length. point 346
2.1.2 b) MP upto 6.00 metre length.
6.00 metre length. point 650
2.1.3 c) LP upto 10.00 metre length. point 750
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
2/2.2 Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.
2.2.1
Short point up to 3.00 metre. length. Each 40
2.2.2
Medium point up to 6.00 metre. Length. Each 60
2.2.3
Long point up to 10.00 metre. Length. Each 100
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
3/2.3 Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)
2.3.3 Long point up to 10.00 metre. Length. Each 15
4/2.4 Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)
2.4.1 Extra long pt. upto 15.00 mtr. Length Each 15
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
2.4.2 Extra long pt. upto 20.00 mtr. Length Each 25
2.4.3 Extra long pt. upto 25.00 mtr. Length Each 20
5/2.7 Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.
2.7.1 With 2x2.5 sqmm+ earth continuity with1x2.5 sqmm PVC insulated unsheathed single core copper conductor cable in 19mm dia.rigid PVC conduit pipes. mtr 8500
2.7.2 With 2x4sqmm+ earth continuity with1x2.5 sqmm PVC insulated unsheathed single core copper conductor cable in 19mm dia.rigid PVC conduit pipes. mtr 1000
2.7.3 With 2x6sqmm+ earth continuity with1x4 sqmm PVC insulated unsheathed single core copper conductor cable in 19mm dia.rigid PVC conduit pipes. mtr 900
6/2.8 Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system .
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
2.8.5 With 3 x 16 sq. mm. + earth continuity with2x 10 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
mtr 1500
7/2.10 Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.
Each 90
8/11.12 Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp
Each 110
9/10 Supplying,installation,testing and Commission of the following indoor surface Mounted LED Luminaires complete with all accessories such as driver etc. and necessary connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department
10.20 Philips lighting luminaire 15W Cirrus Mini Model SM518C LED9S 6500 PSU OD GR/ SM518C LED9S 6500 PSU OD WH or equivalent as approved by the Deptt.
Each 611
10/11.32 Supplying and fixing of Call bell ( Buzzer ) including 5/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt.)as required.
Each 20
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
11/11.00 Supplying,installation,testing and Commission of the following indoor Surface Mounted and Suspended Luminaires LED Luminaires complete with all accessories such as driver etc. and necessary connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department
11.5 Philips 24 W, Astra Surface & wall mounted LED batten Model BN150W LED20S-6500 PSE OD GR or equivalent as approved by the Deptt.
Each 200
12/12.00 Supplying,installation,testing and Commission of the following LED lamp as directed by the department
12.25 Philips LED bulbs non-dimmable 7 W or equivalent as approved by the Deptt. Each 110
13/6 Supplying,installation,testing and Commission of the following indoor Recessed Mounted LED Luminaires complete with all accessories such as driver etc. In the flase ceiling type Armstronng /Gypsum or similar ceiling mouting with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department
6.1 Philips lighting luminaire 15 W GreenLED Model BBS170 1xDLED -5000 PSU WH/ BBS170 1xDLED -4000 PSU WH or GreenLED Square ModelBBS175 1xDLED -5000 PSU WH/ BBS175 1xDLED -4000 PSU WH or equivalent as approved by the Deptt.
Each 60
14/SB8.36 Supplying with fitting and fixing of Foot lamp with Box and lamp holder in 3 module recessed system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. Without lamp.
Each 70
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
15/22.7 Installation of earth station with 40mm dia and 4.5 mtr. long GI pipe with necessary GI reducing socket 40mmx20mm size locking arrangement with hinged cover plate, funnel, GI nuts, thorough bolts etc.for putting pipe and refitting with necessary enclosure on the top etc. as required complete. Each 16
16/22.12 Extra for using salt 5Kg and charcoal 64 Kg. for pipe earth electrode as required.
Each 16
17/22.15 Supplying and laying with 6 SWG GI earth wire at 0.50 mtr. below ground level or conductor earth electrode including soldering, excavation work and refitting etc.as required complete.
Mtr 600
18/22 .31 Supply, fitting & fixing 20 mmx3 mm Copper strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of Brass Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode copper strips and Lightning Arrestor etc. as specified and directed by the deptt.
Each 6
19/23.12 Supplying including installation, connection as approved by the Deptt.)with 2x2.5 sq mm copper FR cable, testing and commissioning of following post top lantern/ WALL LIGHT on existing pole/ Structure including lamp, driver, ballast as required complete as directed and specified by the deptt.
23.12.2 HPS 360 1X CDMTD 70W GR, 1X CDMTD 70W, Philips make) . or equivalent (Equivalent will be selected by the deptt considering the mother items rate) WIPRO/ JAQUAR make.
Each 8
20/27.1 Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator].
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
27.1.2 Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make)
Each 553
21/27.2 Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.
27.2.1.2 Power Flow 225 mm sweep (ORIENT make)
Each 60
22/27.3 Supplying including fitting fixing of following A.C. Wall fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.
27.3.1 ORIENT make or equivalent Usha make
27.3.1.2 Air Circulator wall fan 600 mm sweep Turbo force Each 16
23/SB8.21 Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.
SB8.21.1 100 watt electronic modular 4 step speed control 2 - module type
Each 553
24/29/1 Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department.
2 Ton capacity
(Carrier make) estrella R410 Each 4
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
25/31.1 Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make)
31.1.8 5.0 KVA Automatic Input 90-280 V Out put 200-240 V
Each 4
26/SB8.63 Supplying with fitting and fixing of Single Phase Modular Motor Starter switch of the following specification complete including making necessary connection as specified and directed by the deptt.
SB8.63.3 Overload Relay Range 16 - 25 Amps in 3 Module
Each 4
27/15.2 Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.
15.2.1 ABB, Schneider MG, legrand, Hager make)
15.2.1.3 8 way SPN double door Each 9
28/15.8 Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.
15.8.1 ABB, Schneider MG, legrand, Hager make)
15.8.1.2 6way TPN (4+18) double door Each 24
29/16.1 Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
16.1.2 C Series (Schneider MG, legrand, Hager make)
16.1.2.1 6-32A Each 450
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
30/16.6 Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
16.6.2 C Series (ABB, Schneider MG, legrand, Hager make)
16.6.2.3 63A Each 26
31/16.7 Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
16.7.1 30mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make)
16.7.1.2 40A Each 12
32/16.8 Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
16.8.2 100/300mA sensitivity 4P RCCB (ABB, Schneider MG, legrand, Hager make)
16.8.2.3 63A Each 26
33/17.13 Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35M X 1.20MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 6nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
1. 20mm X 3mm4 strip copper Bus-Bar 0.6 M length each
2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no
3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no
4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no
5. Voltmeter & Ammeter Selector Switch - 2 no
6. 2 A Slide fuse unit - 3nos
(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)
Each 6
34/17.14 Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.50M X 1.60MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 40mm X 40mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 400A 4pole MCCB or Switch Fuse Unit as incomer and provision for 8nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:
1. 40mm X 5mm 4 strip copper Bus - Bar 1.50 M length each
i 20mm X 3mm 4 strip copper Bus-Bar 0.5M each 8 sets
2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no
3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no
4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no
5. Voltmeter & Ammeter Selector Switch - 2 no
6. 2 A Slide fuse unit - 3nos
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)
Each 1
35/16.40 Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved by the Deptt.),as specified and directed by the deptt.
25 KA 415V 50 Hz 3P MCCB (Havells, HPL, Indo Asian make)
i)63A Each 26
ii)125A Each 8
36/ECB5.1 Supplying including installation testing and commissioning of 100kVAr, 440V APFC Panel Non-Compartmentalized Type, Free Standing, Floor Mounted
rated Output 100kVAr
rated Voltage 440V
rated Frequency 50Hz
Number of phases 3 Phase
Switching Option Auto-Manual
ENCLOSURE DETAILS
Material CRCA
Thickness of sheet steel Frame & Doors: 2.0mm, Partitions: 1.6mm, Gland plate: 3.0mm
Dimensions W x H x D (mm) 800 x 1800 x 600 (Approx) + (250 mm for plinth & fan hook
Ingress Protection IP 42
Installation Type Indoor
Cable Entry Bottom
Colour RAL 7035 - Light Grey
BUSBAR DETAILS
Material Aluminium
Cross Section (mm) 40 x 10 x 1 Run
Bus bar Supports DMC Moulded
CAPACITORS
Heavy Duty @ 440V
No of Steps 5
Incomer MCCB, 200A, 36kA CVS Type
Switching Capacitor Duty Contactors
Step Protection MCB/MCCB
APFC RELAY
INCOMER MCCB, 200A, 36kA CVS Type 1
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
Digital Volt - Amp Freq meter 1
Phase Indicating Lamps (L1, L2, L3) 3
Current Transformer - 200/5A 3
APFC Relay 1
Fans 1
Control Circuit Protection - MCB 2
Step Indicating Lamps 10
On / Off push buttons 10
Step protection - MCCB, CVS Type, 25kA - 100A 1 Set 1
37/32.1 Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .
32.1.3 3&1/2core A2XFY
32.1.3.4 70.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
Mtr 100
32.1.3.7 150.00 Sq. mm.3 & 1/2 Core armoured U.G. cable Mtr 160
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
38/32.5 Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)
32.5.3 3&1/2core A2XWY,A2XFY
32.5.3.4 70.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)
Mtr 300
32.5.3.7 150.00 Sq.mm 3&1/2 Core U.G. cable in 65mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)
Mtr 50
39/SB15.1 Supplying installation, testing and commissioning of Passenger Elevator(KONE make for 3stop(544 K 8 persons) having contract speed of 0.65 Metre/Sec(approx.)mps serving different floor in the existing lift shaft as per detailed specification enclosed and as under
Location of the lift-
1.Type & Capacity-Passenger-08 Persons-544Kg.
2.Speed- 0.65 Metre./Sec (approx.)
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE
OFFERED IN
WORDS
TOTAL AMOUNT OFFERED
IN WORDS
3.Type of Drive- Variable Voltage Variable Frequency Drive with Microprocessor based Simplex Full Collective Control.
4. Location of Machine Room- Top
5. Available Travel- 7.2 metres. ( Maximum)
6. Serving- Ground Floor to 2nd Floor (0,1,2) 3 Stops 3 Levels 3 Openings
7. Well Size- 1850 mm WideX 1850 mm Deep over the finished surface
8. Power supply- 415 Volts 3 phase, 50 cycles alternating current
9. Auxiliary required:-single phase-220V,50cycle alternating current.
10. Auxiliary Required- Single-phase 220 V 50 Cycles alternating current.
11. Cab size (Clear Inside approx.---1300mm wideX1100 mm Deep.
12. Pit Depth--1600 mm
13. Head Room-4800 mm.
14. Car Enclosure- Stainless Steel Car- Hairline Finish.
15. Flooring- PVC Flooring
16. Electric Light- Fluorescent Light Fittings
17. Fan- 300 mm Sweep one number.
18. No of Entrances- One Location - Front.
19. Car Entrance- Centre Opening Stainless Steel Power Door without vision panel.
20. Landing Entrance- Centre Opening Stainless Steel Power Door without vision panel.
21. Clear Opening- 800 mm Wide X 2000 mm High.
22. Indicators-Car & Landings-Direction & Position Indicator.
Other Features --Emergency Alarm & Light.
Call Registration LEDS .
OSG Electronic Switch.
Fireman Drive
Intercom.
Full Length Infra Red door Safety.
KONE Rescue Device. Job 3
Sl. No. Description of works Unit Qty.
UNIT RATE
OFFERED
TOTAL AMOUNT OFFERED
UNIT RATE OFFERED IN WORDS
TOTAL AMOUNT OFFERED IN WORDS
40/2.6 Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.
2.6.2 With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. Mtr 5000
41/29.7 Supply, installation, testing & commissioning of Air cooled Ceiling Suspended Duct able Split type Air conditioners of following capacities suitable for refrigerant R22/R407C with outdoor unit consisting of hermetically sealed imported power efficient Scroll compressors, condenser coil and condenser fan and indoor unit consisting of evaporating coil, blower fan, motor & filter. Both cooling coil & condenser coil will be made up of copper-internally grooved with slit fins, anti corrosion blue fins along. The control system shall be microprocessor bases with following safety inbuilt: HP/LP cut-out, SPPR (protection against single phasing & reverse polarity) In-built thermal/temperature protection. Microprocessor controller is provided with following features: Auto switch on or off of memory back up of settings Auto restart after power failure Runtime equalisation of the compressors Built-in time delay to protect compressors Fault diagnostics to facilities speedy correction The cost of the machines will also include 20G hard drawn copper refrigerant piping properly saddles using wall spacers.
29.7.5 16.6Tr Each 2
42/32.5 Load security to be paid to local APDCL Authority. KW 180
EXTERNAL ELECTRIFICATION:-
Sl. No. Description of works Unit Qty.
Unit Rate
offered(Rs)
Total Amt offered(R
s)
Unit Rate offered in
words
Total Amt offered in
words
1/35.1
Supplying, installation, testing and commissioning of the following capacity Copper wound out door type sub-station complete with transformer,HT/LT side fittings and all other following accessories as required complete including payment of ASEB's supervision charge, labour charge, cost of ASEB's materials like metering equipment, CT/PT set etc.(excluding payment of load security),arrangement of charging approval of sub-station from Chief Electrical inspectorate and consisting of the followings:
35.1.6) 250KVA,50Hz,11/.433KV oil filled
transformer with off circuit tap change. Each 1
2/22.7
Installation of earth station with 40mm dia and 4.5 mtr. long GI pipe with necessary GI reducing socket 40mmx20mm size locking arrangement with hinged cover plate, funnel, GI nuts, thorough bolts etc.for putting pipe and refitting with necessary enclosure on the top etc. as required complete.
Each 6
3/22.12
Extra for using salt 5Kg and charcoal 64 Kg. for pipe earth electrode as required.
Each 6
4/22.15
Supplying and laying with 6 SWG GI earth wire at 0.50 mtr. below ground level or conductor earth electrode including soldering, excavation work and refitting etc.as required complete.
Mtr 120
Sl. No. Description of works Unit Qty.
Unit Rate
offered(Rs)
Total Amt offered(R
s)
Unit Rate offered in
words
Total Amt offered in
words
5/41.4
Supplying including installation, testing and commissioning of Water Cooled Jackson Diesel Generator set coupled to suitable alternator of 415 V, AC, 3-Phase 0.8 p.f.(la mounted on a 1) M.S. Fabricated base frame.,2) M.S. fuel tank of required capacity.,3) Residual Silencer.,4) AMF/Standard Control Panel.5) Suitable batteries with lead.,5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the following Technical Specification.. (RANGE FROM 15 KVA TO 625 KV
41.4.21
TECHNICAL DATA CJ250D5P GENERATOR SET SPECIFICATIONS 250/200 3. No. of Phases. 3 phase. 4. POWER FACTOR 0.8 LAG JACKSON ENGINE SPECIFICATION. 1. make). Cummins 2. Model. 6CTA-8.3-G4 3. No. of Cylinders. 6 4. Aspiration. TURBO CHARGED AIR TO AIR COOLED 5. Cooling. Water Cooled. 6. Governor. Electronic 7. Battery Capacity Rating. 2x12 Volt. 8. FUEL CONSUMPTION LTR/HR @ 75% LOAD 40.8 ALTERNATOR SPECIFICATION. 1. make). CGT (STAMFOR 2. Voltage Regulation. +/- 1.0% 3. Insulation. Class - H. 4. Standard Enclosure. IP 23 5. No. of Phases. 3
41.4.21.2
WITH AMF CONTROL PANEL Each 1
Sl. No. Description of works Unit Qty.
Unit Rate
offered(Rs)
Total Amt offered(R
s)
Unit Rate offered in
words
Total Amt offered in
words
6/23.8
Supplying, erection, testing and commissioning of 25 M high mast system with its accessories such as foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, non-integral flood light luminaries with 2 nos 400 W HPSVT lamps and its control gear boxes (Bajaj/ Crompton/ Wipro/ HPL/ Solar/ Philips make) twin dome aviation obstruction lights of with Neon spiral lamps, control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Mast shaft shall be in two sections, hot dip galvanised and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, steel rope 6 mm dia ( 7 / 19 construction) , trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for 9 luminaries symmetrically & its control gear boxes and lightning finial. The mast shall be erected on suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth. The mast shall have an integral power tool installed inside the base compartment for its operation.(BAJAJ/ SRB/VALMONT/ PHILIPS/ PARUTHI ENGR make)
Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates.
Supply of 9 nos. non-integral flood light luminaries with two nos 400 W HPSVT lamps and its control gear boxes.
Supply of twin dome aviation obstruction lights of with Neon spiral lamps.
Sl. No. Description of works Unit Qty.
Unit Rate
offered(Rs)
Total Amt offered(R
s)
Unit Rate offered in
words
Total Amt offered in
words
Supply of control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor.
Construction of suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth with all materials and labour.
Erection of the high mast with the help of suitable equipments and Wiring of luminaries with all Wiring materials and labour.
provision of GI pipe earthing for high mast with 2.5 m long 40 mm dia GI pipe including connection as approved by the Deptt.)to high mast terminal with 25 x 3 mm GI strip with all materials and labour. ( 2 nos per mast require .
Erection of the above panel on suitable foundation including all materials and labour. Each 2
6/23.11
Supplying including installation, connection as approved by the Deptt.)with 2x2.5 sq mm copper FR cable, testing and commissioning of following BOLLARD LIGHT on Cement concrete foundation including lamp, driver, ballast as required complete as directed and specified by the deptt.
23.11.2
FGC 1 2X PLS /2P 9W, Philips make) . or equivalent (Equivalent will be selected by the deptt considering the mother items rate) WIPRO/ JAQUAR make. Each 35
Sl. No. Description of works Unit Qty.
Unit Rate
offered(Rs)
Total Amt offered(R
s)
Unit Rate offered in
words
Total Amt offered in
words
7/26.3
Supply with fitting & fixing 60 mm dia 3660 mm height 2-in-one combination double arm integrated with acrylic diffusers, translucent top, bottom clear , black powder painted finish tubular pole .The pole is made of GI tube with GI cylindrical control box with service door and a circular base plate . The pole is swaged at the top to accommodate double arm bracket assembly, secured on to the top by means of 2 annular rings with Allen grub screws .The luminaries is designed for and integral with 2 nos 36 W CFL suitable for operation on 240 V 50 Hz single phase AC supply . The pole is to be fitted on 1:3:6 PCC pole foundation of size 300 mmx300 mmx1200 mm with grouting nuts & bolts as specified & directed by the deptt .(Metal Coats make).KALINGA-2 model or equivalent. Each 30
8/32.1
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .
32.1.1.
1 4.00mm2 2core U.G.Cable. mtr 200
Sl. No. Description of works Unit Qty.
Unit Rate
offered(Rs)
Total Amt offered(R
s)
Unit Rate offered in
words
Total Amt offered in
words
9/32.5
Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)
32.5.1
Core - 2 A2XWaY A2XFaY
32.5.1.
1
4.00mm2 4core U.G.Cable in 25mm dia GI pipe mtr 600
10New1
Supplying including installation with required bracket, connection cable, as approved by the Deptt. with 2x2.5 sqmm copper FR CABLE, testing and commissioning of the following street light/ FLOOD LIGHT on existing pole/ Structure including lamp, driver, ballast as required complete as directed and specified by the deptt.
New1.1
Philips 120 W, Uniflood integral flood light with driver inside a PDC housing highly efficient, reliable and sturdy Model BVP120 LED 70 CW NB FG S1 PSU GR or equivalent as approved by the Deptt. Each 46
Sl. No. Description of works Unit Qty.
Unit Rate
offered(Rs)
Total Amt offered(R
s)
Unit Rate offered in
words
Total Amt offered in
words
11/39.7.4
Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET 3 (Three Phase) with steel cable rope and submersible cable complete as directed and specified by the deptt.
Three phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 3 HP STAGE 7 to 40 with MCB controlled Submersible motor pump set control panel. Each 2
12/36.40
Construction of 3 phase 11 KV Line on 8.5 m PSC Pole using AAA Raccoon conductor 7/3.81mm with T cross arm average span 70m. Km 0.50
13/EC6.2
Supplying including installation, testing and commissioning of Solar Street light as per following specification and as directed by the Department.
15 W LED SOLAR STREET LIGHT [Confirming RDSO Specification No: RDSO/PE/SPEC/PS/0093-2008(Rev 0)]
SYSTEM SPECIFICATION
15 W LED based luminaries/fixture
(1500 Lumens –typical).
LED Type: White High Powered
LED’s 5500-6500 K temperature.
Sl. No. Description of works Unit Qty.
Unit Rate
offered(Rs)
Total Amt offered(R
s)
Unit Rate offered in
words
Total Amt offered in
words
Automatic Dusk to Dawn Operate ion. Independent standalone Solar Street Lighting System.
Powered by a 12V, 80 Wp Solar PV Module confirming RDSO Part-I Approval & IEC: 61215
Certification. (Model: TBP 1280/ 1280M). (make: TATA BP SOLAR or equivalent)
12V, 75Ah @ C10, Tubular Plate Lead Acid Low Maintenance Battery with PP Container
(make: TATA BP SOLAR or equivalent).
Battery Box made of M.S fabricated with corrosion resistance paint.
6m height MS Pole with corrosion resistance paint.
Manufacturers Criteria:
Must have ISO: 9001 & ISO: 14001 Certification.
(As per Annexure A: Clause no: b, Page 10)
Must have integrated production capacity of Solar PV Cell & Module.
(As per Annexure A: Clause no: d, Page: 10)
SUGGESTED UNIT PRICE
Unit Cost Without Installation & Commissioning) Each 30
Installation & Commissioning Charges Each 30
Note:-This estimate is prepared on the basis of APWD(Electrical)Schedule 2014.
SANITARY WORKS
SL.
NO. DESCRIPTION OF ITEMS UNIT
QUA
NTIT
Y
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt offered in
words
EUROPEAN TYPE WATER CLOSET
1 Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)
C) Jaquar make
a) White
(ii) Size 550 x 350 x 360 (Cat No.CNS-WHT-WS02) (inclusive of seat cover)
Each 75.00
INDIAN TYPE WATER CLOSET
2 Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)
Indian type W.C Orissa pattern of size 580 x 440 mm
a) White
iii) Jaquar make Each 5.00
PVC FLUSHING CISTERN
Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)
i) Parryware make
a) White
(i)Economy Single Flush (Cat No.C8090/C8055)
Each 80
Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.
(B) Hindware Make
(iv) FB 460 x 350 x 260 (Cat. No.60001)
Each 46
SL.
NO. DESCRIPTION OF ITEMS UNIT
QUA
NTIT
Y
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt offered in
words
WASH BASIN
3 Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)
Basin (without pedestal)
(B) Hindware Make
(a) White
(iii) Viking 550 x 400 (Cat.No.10008)
Each 70.00
4 LABORATORY SINK
Providing fitting & fixing laboratory sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately.
(B) Hindware make
(a) White
(ii) Size 450 x 300 x 180 (Cat.No.50001) each 6.00
5 Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.
Each 48.00
6 Providing fitting and fixing Glass Shelf complete as directed and specified.
Glass shelf with C.P. guard rail
(i) Agmeco make
(e) Dolfee (Cat.No.DE-00104) Each 48.00
7 SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER
Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified.
(a) Parryware Make
(ii) Wall Soap tray (Cat. No.C9951) Each 36.00
8 Providing, fitting and fixing CP towel rail complete as directed and specified.
(b) Sona make
SL.
NO. DESCRIPTION OF ITEMS UNIT
QUA
NTIT
Y
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt offered in
words
(iii) Towel rail Diplomat 600mm long (Cat.No.TR-0605) Each 28.00
9 Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified.
(a) Jaquar make
(i) Continental (Cat.No. ACN-1191N) Each 36.00
10 Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.
(b) Sona make
(i) Bottle trap indian 32mm (Cat. No.BT-0751) Each 36.00
11 HCI PIPES,BENDS,JUNCTIONS,TEES ETC.
Supplying, fitting and fixing I.S.I marked or similar approved H.C.I pipe including bolts and nuts and other fittings as required and complete at all levels including below G.L as directed and specified.
a) In exposed surfaces or in trenches.
(i) 150mm dia. RM
245.0
0
(ii) 100mm dia. RM
126.0
0
(iii) 50mm dia. RM 115.00
b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.
(ii) 100mm dia. RM
240.0
0
(iii) 50mm dia. RM
115.0
0
12 Supplying, fitting and fixing H.C.I bend with door including bolts and nuts and other fittings as required complete at all levels including below G.L as directed and specified.
a) In exposed surfaces or in trenches.
(i) 150mm dia. Each 56.00
(ii) 100mm dia. Each 52.00
(iii) 50mm dia. Each 44.00
b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.
(ii) 100mm dia. Each 48.00
SL.
NO. DESCRIPTION OF ITEMS UNIT
QUA
NTIT
Y
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt offered in
words
13 Supplying,fitting and fixing H.C.I plain bend including bolts and nuts and other fittings as required complete at all levels including below G.L as directed and specified.
a) In exposed surfaces or in trenches.
(i) 150mm dia. Each 30.00
(ii) 100mm dia. Each 30.00
(iii) 50mm dia. Each 30.00
14 PVC PIPES,BENDS,JUNCTIONS,TEES ETC.
Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified.
a) In exposed surfaces or in trenches.
(i) 160mm dia. R.m 240.0
0
(ii) 110mm dia. R.m 125.0
0
(v) 63 mm dia. R.m 115.00
15 Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
a) In exposed surfaces or in trenches.
(i) 160mm dia Each 45.00
(ii) 110mm dia. Each 45.00
(iv) 75 mm dia. Each 45.00
16 Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.
(ii) 110mm dia. PVC cowel of ISI make Each 42.00
17 Providing fiting & fixing C.I. Grating to the floors complete as directed and specified.
(a) 110mm dia Each 45.00
SL.
NO. DESCRIPTION OF ITEMS UNIT
QUA
NTIT
Y
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt offered in
words
18 Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
a) In exposed surfaces or in trenches.
(i) 160mm x 110 mm Each 38.00
19 Supplying, fitting and fixing H.C.I plain single equal junction/plain tee including bolts and nuts and other fittings as required complete at all levels including below G.L as directed and specified.
a) In exposed surfaces or in trenches.
(ii) 100mm dia. Each 28.00
20 SOAK PIT AND INSPECTION CHAMBER
21 Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.
cum 32.00
Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. Each 25.00
22 Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 19 Kg. weight complete as directed and specified
Each
23 Providing fitting and fixing (600x600)mm 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified
Each 16.00
INTERNAL WATER SUPPLY WORKS
SL.
NO. DESCRIPTION OF ITEMS
UNI
T
QUAN
TITY
Unit Rate offered(R
s) Total Amt
offered(Rs)
Unit Rate offered in
words
Total Amt offered in
words
1 Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified.
(A) Exposed on walls
a) 50 mm dia (Medium)
i) Using Tata make
R.M.
226.0
0
b) 40 mm dia (Medium)
i) Using Tata make
R.M.
135.0
0
c) 32 mm dia (Medium)
i) Using Tata make
R.M.
126.0
0
d) 25 mm dia (Medium)
i) Using Tata make R.M. 86.00
e) 20mm dia (Medium)
i) Using Tata make R.M. 86.00
(B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure.
f) 15 mm dia (Medium)
i) Using Tata make R.M. 86.00
2 Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)
Jaquare make
(a)Continental /Clarion
(i)Standard Each 76.00
3 STOP COCK Supplying fitting and fixing chrome
plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately)
SL.
NO. DESCRIPTION OF ITEMS
UNI
T
QUAN
TITY
Unit Rate offered(R
s) Total Amt
offered(Rs)
Unit Rate offered in
words
Total Amt offered in
words
Jaquar
(i)15mm dia Male / Female (long thread) Each 58.00
PUSH BIB COCK
Supplying fitting and fixing push bib cock 15mm dia complete as directed and specified as follows. (pipes will be measured and paid separately).
a) C.P.C.H.
(a) Light type Each 22.00
(b) Heavy type Each 10.00
PILLAR COCK
4 Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed.
Jaguar make
(a) Continental Each 28.00
(b)Long neck with areator
Each 12.00
Agmeco (classic)
Elbow action pillar cock (Agmeco)
(b) MS-491/ Heavy Duty Each 12.00
5 SINK COCK Supplying fitting and fixing Chrome
Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately)
Jaquar brand
ii) Sink cock with raised 'J' shaped swinging spout
Each 10.00
VALVE
7 Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.
a) 50mm dia Each 10.00
8 Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes
2000 Lt capacity
SL.
NO. DESCRIPTION OF ITEMS
UNI
T
QUAN
TITY
Unit Rate offered(R
s) Total Amt
offered(Rs)
Unit Rate offered in
words
Total Amt offered in
words
(a) Sintex make Each 6
9 Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost). Rm 200
10 Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department.
vi) Bore hole of 200mm diameter
Rm 200
11 Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.
PVC PIPE
SUPREME /PRINCE / FUSION /SFMC Brand
vii) 160mm diameter Rm 200
12 Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.
A) G.I. pipe
a) TATA / SAIL (Medium)socket should be welded to the pipes.
iv) 50mm diameter Rm 200.0
SL.
NO. DESCRIPTION OF ITEMS
UNI
T
QUAN
TITY
Unit Rate offered(R
s) Total Amt
offered(Rs)
Unit Rate offered in
words
Total Amt offered in
words
13 Supplying fitting and fixing brass Tez filter 2.00 metre long.
Each 8.00
14 Supplying fitting and fixing check valve (non return valve) including thread to pipes.
iv) 50mm diameter Each 8.00
15 Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained
job 1.00
16 Flushing, clearing, washing and watering of the tube well
job 1.00
17 Supplying, installation and
commisioning of submessible
pump from underground
reservoir to PVC overhead
reservor of hospital and
quarters. each 2.00
IRON REMOVAL WATER FILTER
18 Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materials of various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six monthhs
(A) With Zoloto fittings
(IV) 10000 liters capacity
(a) 4 mm thick Vessel
Each 3.00
Sewage treatment plant & RAINWATER HERVESTING SYSTEM
SL.
NO.
DESCRIPTION OF
ITEMS UNIT
QUANTI
TY
Unit Rate
offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
RAINWATER HERVESTING SYSTEM
For R.C.C Roof
Providing,Fixing, testing &Commissioning of Rain water Hervesting system for 1000 sq.feet roof area with 110 mm uPVC pipe of Class-3 conforming to IS:4985-200 (with uptodate amendment) with extra UV ray protection by Titanium Dioxide(TiO2) directing the Rainwater to Rainy filter/Pop-up raintap filter (Excluding Civil Works)
Each
10.00
Sewage treatment plant
1 Attached growth aerobic
Sewage treatment System with FRP treatment chamber with all components including Tertiary filtration system and clorine dosing system to achieve treated water quality suitable for reuse or discharge as per CPCB norms.
e) Capacity-40 KLD each 1.00
Sewage treatment plant & RAINWATER HERVESTING SYSTEM
SL.
NO.
DESCRIPTION
OF ITEMS UNIT QUANTITY
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
1 Controller , Call Station , Keypad
Nos 2.00
2 Ceiling Mounted Speaker 6W
Nos 15.00
3 Wall mount speaker 12W
Nos 20.00
4 Amplifier Nos 2.00
5 SITC of 19-inch Equipment Rack with standardized (EIA 310-D, IEC 60297 and DIN 41494 SC48D) frame or enclosure for mounting multiple PA controllers, CD player, FM sources, Amplifiers etc modules, shall have Lockable doors, with proper ventilated and open able doors from all sides, with casters and with cooling fans as above complete with necessary mounting hardware & accesories.
Nos 2.00
6 SITC of Professional CD/DVD player with USB flash port & 19" Rack mount arrangement
Nos 2.00
7 SITC of 2-Core 1.5 sq.mm Shielded FRLS Cable Nos 250.00
( CH-29: FIRE-FIGHTING WORKS ) & NS Items
SL.No. Description Quantity Unit
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
A. HYDRANT SYSTEM
1 Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)
18 each
2 Providing controlled percolating (C.P.) hose ISI Marked (IS:8423) 63 mm dia X 15 M long complete with instantaneous type Gun Metal 63 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as required. (MAKE: NIRMAL RUBBER/NEWAGE)
12 each
3 Providing RRL Hose with ISI Marked (IS:636) 63 mm dia X15 M long complete with instantaneous type Gun Metal 3 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as reqd. ( MAKE: NIRMAL RUBBER/NEWAGE)
24 each
SL.No. Description Quantity Unit
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
4 Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated)
4.1 a) 900X600X450 12 each
4.2 b) 2000 X 1200 X450 12 each
5 Providing & Fixing of Gun Metal 63 mm dia Short Branch Pipe with 20 mm dia nozzle, ISI marked (IS:903) complete as required. (Make: ESSEL/WINCO/NEWAGE).
26 each
6 Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE
6.1 a) 02 way 2 each
6.2 b) 04 way 1 each
SL.No. Description Quantity Unit
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
7 Providing & fixing of Gun Metal fire Brigade connection (withdrawl connecting head) consisting of 63mm instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE
7.1 a) 2 way 2 each
7.2 b) 4 way 1 each
8 Providing & Fixing of Weather Proof M.S. Cabinet (to enclose above Inlet Collection Head Connection) fabricated from 16 S.W.G. M.S. sheet centre opening with 3 mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coasts of synthetic enamel paint of appreoved make and shade and suitably mounted. Exact size and shape shall be subject to site conditions and prior approval. (Make:Self Fabricated)
1 each
9 Providing & fixing of Gun Metal fire Brigade suction hose coupling (draw out connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia GI suction pipe and foot valve (to be connected to static Tank) complete as reqd.(Make: Self Fabricated)
2 each
SL.No. Description Quantity Unit
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
10 Providing & fixing of Weather Proof M.S. cabinet (to enclose above draw out connection) fabricated from 16SWG M.S. sheet centre opening with 3mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of appreoved make and shade and sutable mounted . Exact size and shape shall be subject to site conditions and prior approval) (Make: Self Fabricated)
2 each
11 Providing ,Fixing ,Testing & Commissioning of Air Release Valve
11.1 a) 25 mm dia 4 each
13 Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc.complete with all fittings (butt welded) viz flanges, bends, tees, elbows, reducers etc including excavation (upto 1.5 m Deep), back filling and removal of surplus soil & providing anti corrosive treatment(coating and wrapping) as per IS:10221 with 4 mm thick tape complete as reqd. (MAKE:TATA/JINDAL/NEZONE)
a) 200 mm dia 260 rm
13.1 b) 150 mm dia 126 rm
c) 100 mm dia 124 rm
d) 80 mm dia 65 rm
e) 65 mm dia 65 rm
f) 40 mm dia 65 rm
SL.No. Description Quantity Unit
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
14 Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco)
(a) 150 mm dia 3 each
(c) 80 mm dia 1 each
15 Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO)
15.1 (a) 200 mm dia 3 each
15.2 (b) 150 mm dia 3 each
15.3 (d) 80 mm dia 1 each
16 Providing, Erection, Testing & Commissioning of Cast Iron Sluice Valve/ Gate Valve confirming to IS:14846/2000 complete with matching flanges, rubber insertion, nuts, bolts and washer etc of following size complete as required (MAKE:KOLEY/KALPANA/AUDCO)
16.1 (a) 200 mm dia 2 each
17 Providing, erection testing, Commissioning of Cast Iron Foot Valve/Stainer confirming to IS:4038/1538 complete with flanges, nuts, bolts and washer etc as required
17.1 (a) 200 mm dia 2 each
SL.No. Description Quantity Unit
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
18 Providing,erection testing & commissioning of pressure gauge 100 mm dia (0-10Kg/cm2)
8 each
19 Providing ,erection,Testing & Commissioning of Pressure Switch (MAKE:INDFOSS)
5 each
21 Supply,installation,testing & commissioning of 150 mm dia installation control valve assembly comprising of vertical wet alarm valve, hydraulic alarm motor & gong, 15 mm dia Test Valve, 50 mm dia , Drain Valve and all necessary trimming connections including 02 nos. pressure gauge as per manufacturers catalogue complete as reqd.(UL/FM/LPC Listed/Approved) (Make : HD FIRE )
2 each
22 Supplying and laying of following size NP2 class RCC Hume pipe i/c collars jointed with stiff mixture of cement morter 1:2 ( 1 cement:2 fine sand) across the road including cutting the road ( if reqd) digging the trench, refilling the same after laying pipe, ramming the soil etc as reqd.
22.1 (a) 400 mm dia 24 rm
22.2 (b) 300 mm dia 24 rm
23 Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884.
18 each
SL.No. Description Quantity Unit
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
FIRE EXTINGUISHERS
26 Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD
10 each
27 Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark (05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD
10 each
B. PUMPS AND MACHINERY- ELECTRICALS
15 HP three Phase vertical multistage high pressure centrifugal pump set 15 stage (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) with Star delta Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) Fully Automatic citation
2
Each
SL.No. Description Quantity Unit
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
EARTHING
34 Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
2 Each
35 Extra for using salt 5 Kg and Charcoal 96 Kg in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .
2 Each
36 Supplying & laying of 25x4 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.
14
Metre.
SL.No. Description Quantity Unit
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
37 Supplying & laying of 25x6 mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.
42 Metre.
38 Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make).
38.1 Size of Tray
38.2 76 20 Metre
38.3 101 25 Metre
38.4 304 40 Metre
CAMPUS ROAD & CARPARKING
SL.
NO. DESCRIPTION OF ITEMS
UN
IT
QUANTI
TY
Unit
Rate
offered(
Rs)
Total Amt
offered(Rs)
Unit
Rate
offere
d in
words
Total Amt
offered in
words
1 Earthwork
Raising low site around the building
with approved soil obtained from
outside by truck carriage including
breaking clods, dressing etc.
complete including paying necessary
forest royelty, sales tax, land
compensation, municipal gate fees,
if any monopoly duty etc. (profile
measurement to be taken and
12.5% deduction for shrinkage to be
made from total quantity) etc.
complete as directed and specified.
(b) Other than Guwahati city Cum 1154.30
1.01
Construction of Sub-grade and
earthen shoulders with approved
materials obtained from borrow
pits, with all lifts & leads,
transporting to site, spreading,
grading to required slope and
compacting to meet requirement of
table 300-2 (including compensation
of earth ). (Including cost of testing
of materials at site and laboratory as
directed by the deptt.)
b) from Government land
Cu.m 1,154.30
SL.
NO
DESCRIPTION OF ITEMS
UN
IT
QUANTIT
Y
UNIT
RATE
OFFER
ED(Rs
)
TOTAL
AMT
OFFERE
D(Rs)
UNIT
RATE
OFFE
RED
in
WOR
DS
TOTAL
AMT
OFFERE
D in
WORDS
1.02
Construction of Granular sub-base
by providing close graded material,
spreading in uniform layers with
motor grader on prepared surface,
mixing by mix in place method with
rotavator at OMC, and compacting
with vibratory roller to achieve the
desired density, complete as per
Clause 401 of MoRTH specifications
(with an initial lead of 5 km)
(including cost of testing of
materials at site and laboratory as
directed by the deptt.)
(c)Using Grading III material
cum
577.15
SL.
No DESCRIPTION OF ITEMS
UN
IT
QUANTIT
Y
UNIT
RATE
OFFER
ED(Rs
)
TOTAL
AMT
OFFERED(
Rs)
UNIT
RATE
OFFE
RED
in
WOR
DS
TOTAL
AMT
OFFERED
in
WORDS
Providing and laying of inter
locking concrete block
pavement (ICBP) with cement
concrete paver blocks as per
IS 15658 - 2006 of thickness
80mm and 28days
compressive strength not less
than 30N / m over a layer of
bedding sand of compacred
thickness 30mm , laid either in
stretcher / running /
herringbone pattern of bonds
as directed by the engineer
and in proper level and grade
and compacted with
appropriate equipment such
as piat vibrator along with
spreading of a thin layer of
joint filling sand to fill up the
gaps between blocks including
constrution of edge restraint
wherever required complete
as per drawings and Technical
specification clause 1504 of
MORD.
sq.
m 11543.00
Landscaping
SL.
NO. DESCRIPTION OF ITEMS UNIT
QUAN
TITY
Unit Rate offered(R
s)
Total Amt offered(Rs
)
Unit Rate
offered in words
Total Amt offered in
words
LAWN MAKING BY DIBBLING
Supplying and dibbling of selected lawn grass [ Doob grass (Cynodon dactylon), cushion grass (Axonopus affinis)] after preparing the land by ploughing / working to a depth of 40 -45 cm, removing of all unwanted debris ( rubbles, pebbles, plant roots etc.), mixing of organic manure(10kg - 15kg/sq.m), levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of dibbling including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.
(b) By Carpet grass (Axonopus affinis) Sq.m 1250
1 TREE PLANTING
Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .
SHADE TREE
(D) Bottle Brush / Nil Gulmohar / Debadaru / Weeping Willow
each 250
Half brick circular tree guard internal diametre 1.25 m and height 1.2 m above ground and 0.02 m below ground bottom two coarses laid dry and top three coarses in cement mortar 1:6 and the intermediate coarses being in dry honey comb masonry as per design complete.
each Rs.50.00
SL.
NO. DESCRIPTION OF ITEMS UNIT
QUAN
TITY
Unit Rate offered(R
s)
Total Amt offered(Rs
)
Unit Rate
offered in words
Total Amt offered in
words
HEDGE PLANTING / EXTERNAL HEDGE
Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .
(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD
(iii) With Chinese Bamboo metre 200
EDGE PLANTING / INTERNAL HEDGE
Supplying and planting of suitable plant materials for edge making / Internal hedge(20 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .
(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD
(iii) With Brindavan / Latifolius metre 200
SHRUB PLANTING
Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .
(A) Radhachura / Krishnachura / Rat ki rani / Ixora / Jetuka
each
125
MAIN GATE
SL.
NO.
DESCRIPTION OF
ITEMS UNIT QUANTITY
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
1
Structural steel work
in sigle sections
including cutting,
hoisting, fixing in
position and applying
a priming coat of red
lead paint (up to
4.6m height) from
plinth level including
drilling holes,
supplying, fitting and
fixing with bolts and
nuts or welding, if
necessary as directed.
c) In M.S. angles,
channels, Tees etc.
(for Gates in Hospital
and others areas)
SHS 35X35X4.0
25 x 1.8 x 2 x 3.57
Qtl 3.57
RHS 60X40X3.0
8 x 3 x 4.25
Qtl 1.20
SQ BAR 20MM
30 x 1.8 x 2 x 3.14
Qtl 3.77
SL.
NO.
DESCRIPTION OF
ITEMS UNIT QUANTITY
Unit Rate offered(Rs)
Total Amt offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
2
Painting two coats
(excluding priming
coat) on new steel
and other metal
surface with enamel
paint of approved
brand and
manufacture(Asian
paint/ Berger paint/
ICI paint/ J & N
paint/ Nerolac) to
give an even shade
including cleaning the
surface of all dirt,
dust and other foreign
matter.
(i).Surfaces over
100mm in width or
girth.
a). General purpose
(Asian paint/ Berger
paint/ ICI paint/ J &
N paint/ Nerolac).
Sqm 26.00
COMPOUND WALL
SL.
NO. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
1 EARTHWORK
1.01
Earthwork in excavation
for foundation trenches
of walls, retaining walls,
footing of column, steps,
septic tank etc.
including refilling (return
filling) the quantity as
necessary after
completion of work,
breaking clods in return
filling, dressing,
watering and ramming
etc. and removal of
surplus earth with all
lead and lifts as directed
and specified in the
following classification of
soils including bailing
out water where
necessary as directed
and specified.
(A) Up to a depth of
2.00m below the
existing ground level
(a) In ordinary soil
Cum 3.69
2
PLAIN CEMENT
CONCRETE WORKS
SL.
NO. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
2.01
Plain cement concrete
works with coarse
aggregate of sizes
13mm to 32mm in
foundation bed for
footing steps, walls,
brick works etc. as
directed and specified
including dewatering if
necessary, and curing
complete (shuttering
where necessary shall
be measured and paid
separately).
(a). In prop. 1:3: 6 (1
cement:3 coarse sand :
6 coarse agg. by volume
(using mixture machine)
Cum 0.38
3 REINFORCED CEMENT
CONCRETE WORKS
SL.
NO. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
3.01
Providing and laying
plain/reinforced cement
concrete works in prop
1:1.5:3 (1 cement :1.5
coarse sand :3 graded
stone chips, 20mm
down) including
dewatering if necessary,
and curing complete but
excluding cost of form
work and reinforcement
for reinforced cement
concrete work (form
work and reinforcement
will be measured and
paid separately)
(i)In substructure up
to plinth level
Foundation, footing,
column with base, tie
and plinth beam, grade
beam, pile cap, base
slab, retaining walls,
walls of septic tank,
inspection pit and the
like and other works not
less than 100mm thick.
Cum 0.68
(ii)In super structure
above plinth level and
at levels.
SL.
NO. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
3.02
(a) Columns, pillars,
posts, struts, suspended
floor, roof, landing, shelf
and support, balcony,
lintel, sill band, beam,
girder, bressumer,
cantilever, staircase,
ramp including
preparing of top surface
and furnishing and
nosing.
Ground floor to second
floor Cum 1.08
4 FORM WORK
4.01
Providing form work of
ordinary timber planking
so as to give a round
finish including
centering, shuttering,
strutting and propping
etc. height of propping
and centering below
supporting floor to
ceiling not exceeding
4.0M and removal of the
same for in-situ
reinforced concrete and
plain concrete work in:
SL.
NO. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
(a) Foundation, footings,
bases of columns, pile
cap, raft and mass
concrete works etc.
Using 25mm thick plank Sq.m 3.24
4.02 Sides of tie beams,
grade beams etc. at or
below ground level.
(b) Using 25mm thick
plank Sqm 3.20
4.03 Sides and Soffits of
Beams, beam
haunchings, cantilever
girders, bressumers,
lintels and horizontal
ties.
(a) For depth not
exceeding 1.0M.
(ii) Using 25mm thick
plank Sqm 0.90
5 REINFORCEMENT
SL.
NO. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
5.01
Supplying, fitting and
fixing in position
reinforcement bars
conforming to relevant
I.S. Code for R.C.C.
work/ R.B. walling
including straightening,
cleaning, cutting and
bending to proper
shapes and length as
per details, supplying
and binding with 20 G
annealed black wire and
placing in position with
proper blocks, supports,
chairs, spacers etc.
complete (up to 1st floor
level).
b) Other ISI approved
TMT reinforcement bar
(SAI/BISCON/THERMAX)
(For Assam Type Bldg.,
drain works,,retaining
wall&boundary wall etc.
.
Qtl 1.30
6 BRICKWORK
SL.
NO. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
6.01 Brick work in cement
morter with 1st class
brick including racking
out joints and
dewatering if necessary,
and curing complete as
directed in sub-structure
up to plinth level.
(d). In proportion 1:4. Cu.m 0.63
6.02 1st class brick nogged
wall in cement mortar
including racking out
joints and curing
complete as directed in
super structure above
plinth up to 1st floor
level (protruding M.S
rod/Tor steel of column
to be embeded in
cement mortar and will
be measured and paid
separately)
(A) 112mm thick brick
wall
(a) In cement mortar in
proportion 1:4.
(1 cement:4 sand) Sqm 12.5
PLASTERING
SL.
NO. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
6.03 20 mm thick Cement
plaster in two coats on
single or half brick walls
for interior plastering up
to 1st floor level
including arises, internal
rounded
angles,chamfers and /
or rounded angles not
exceeding 80mm in
girth and finished even
and smooth including
curing complete as
directed.
A) On rough side (backing
coat 15 mm and
finishing coat 5mm thick)
b) In cement mortar 1:4 Sqm 13.05
6.04 15 mm thick Cement
plaster in single coat on
single or half brick wall for
interior plastering up to
1st floor level including
arises, internal rounded
angles, not exceeding
80mm girth and finished
even and smooth including
curing complete as
directed.
B) On fair side
b) In cement mortar 1:4 Sqm 13.05
7 PAINTING
SL.
NO. DESCRIPTION OF ITEMS UNIT QUANTITY
Unit Rate
offered(Rs)
Total Amt
offered(Rs)
Unit Rate
offered in
words
Total Amt
offered in
words
7.01 Applying one coat of
cement primer of
approved brand and
manufacture on new
wall surface after
throughly brooming the
surfaces free from
mortar droppings and
other foreign matter and
including preparing the
surface even and sand
papered smooth.
12.5mm thick Sq.m 32.40
7.02 Finishing old / new wall
with water proofing
weather coat smooth
anti-fungal exterior
painting of approved
make of Berger paint of
required shade after
cleaning and clearing
the surface etc.
including scaffolding
complete as directed at
all levels (two coats)
Sqm 32.4
8
8.01 Supplying fitting and
fixing M.S.angles, M.S.
flat, M.S. bolts and nuts
including painting with
red lead paint one coat
complete as directed.
b) M. S. Flats……. Qtl 1.08