4
CITY PLUS SHOWER/BATH MIXER W/DIVERTER To see the complete LAUFEN range go to www.reece.com.au/bathrooms LAUFEN Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors. Tech Page Version 1 CLEANING RECOMMENDATIONS We recommend the use of soapy water or approved cleaners. This product should not be cleaned with abrasive materials. Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty. Dimensions are nominal measurements only. TM WMK25894 AS/NZS 3718 SPECIFICATIONS Recommended use Domestic, Hotel and Commercial Colour availability Chrome Pressure rating Maximum continuous operating pressure 1000kPa. As per AS/NZS3500 pressure must be limited to 500kPa on any new home, extension or renovation. For best performance and longer life we recommend 150-500kPa. Hot and cold water inlet pressure should be equal. Temperature rating Maximum continuous working temperature 80°C Suitable Hot Water Units Storage Tank: Yes Continuous Flow: Yes Gravity Feed: Not suitable page 1 of 4

CITY PLUS SHOWER/BATH MIXER W/DIVERTER...CITY PLUS SHOWER/BATH MIXER W/DIVERTER Before installing the decor, open the valves and check for water tightness. Only for Simibox Light without

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CITY PLUS SHOWER/BATH MIXER W/DIVERTER...CITY PLUS SHOWER/BATH MIXER W/DIVERTER Before installing the decor, open the valves and check for water tightness. Only for Simibox Light without

CITY PLUS SHOWER/BATH MIXER W/DIVERTER

To see the complete LAUFEN range go to www.reece.com.au/bathrooms

LAUFEN

Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.

Tech Page Version 1

CLEAnIng RECOMMEnDATIOnSWe recommend the use of soapy water or approved cleaners.

This product should not be cleaned with abrasive materials.

Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty.

Dimensions are nominal measurements only.

TM

WMK25894AS/NZS 3718

SPECIFICATIOnSRecommended use Domestic, Hotel and Commercial

Colour availability Chrome

Pressure rating Maximum continuous operating pressure 1000kPa.

As per AS/NZS3500 pressure must be limited to 500kPa on any new home, extension or renovation.

For best performance and longer life we recommend 150-500kPa.

Hot and cold water inlet pressure should be equal.

Temperature rating Maximum continuous working temperature 80°C

Suitable Hot Water Units

Storage Tank: Yes

Continuous Flow: Yes

Gravity Feed: Not suitable

page 1 of 4

Page 2: CITY PLUS SHOWER/BATH MIXER W/DIVERTER...CITY PLUS SHOWER/BATH MIXER W/DIVERTER Before installing the decor, open the valves and check for water tightness. Only for Simibox Light without

LAUFEN

Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference

Important note

Mixer must be installed to the requirements of AS/NZS 3500 by a qualified plumber. Your mixer comes to you already factory assembled and tested. We do not recommend the dismantling of any internal part of the mixer. The mixers are factory tested and sealed so as to give the best performance.

CITY PLUS SHOWER/BATH MIXER W/DIVERTER

InSTALLATIOn InSTRUCTIOnS

1

2

3

45

Turn off the stop-cocks before working on the elements

Factory setting

Input/Output inverters

page 2 of 4

Page 3: CITY PLUS SHOWER/BATH MIXER W/DIVERTER...CITY PLUS SHOWER/BATH MIXER W/DIVERTER Before installing the decor, open the valves and check for water tightness. Only for Simibox Light without

LAUFEN

Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference

CITY PLUS SHOWER/BATH MIXER W/DIVERTER

2

3

6 Nm +/- 1 Nm

Tighten the 2 screws parallel (1 turn each side)Check before installation that all seals are available and at the right place

page 3 of 4

Page 4: CITY PLUS SHOWER/BATH MIXER W/DIVERTER...CITY PLUS SHOWER/BATH MIXER W/DIVERTER Before installing the decor, open the valves and check for water tightness. Only for Simibox Light without

LAUFEN

Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference

CITY PLUS SHOWER/BATH MIXER W/DIVERTER

Before installing the decor, open the valves and check for water tightness.

Only for Simibox Light without stop valves

1

3

2

4

5

Examples of how to fit the decorative elements

page 4 of 4