Upload
lethien
View
217
Download
2
Embed Size (px)
Citation preview
DEL1150 | may 2015©Studio Graphique, Inc. designwithdirection.com
City of Delaware // Signage and Wayfinding ProgramDowntown Design Intent Bid Documentation
Drawing inDex
inSTrUCTiOnS/SPeCiFiCaTiOnS
SHEET DESCRIPTION
i Project Introduction & Requirements
iii-vii Performance Specifications
viii Materials, Colors & Typography
exTeriOr SignS
SHEET DESCRIPTION
1 Sign Family
2 A1 Downtown Trailblazer Sign
3 A2 Downtown Parking Directional Sign
4–5 A3 Downtown Vehicular Directional Sign
6 B1 Downtown Parking Identification Sign
7 B2 NW Neighborhood Street Sign Topper
MATERIALS & COLORS TYPOGRAPHY
SYMBOLS
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890INTERSTATE LIGHT CONDENSED | HTTP://WWW.MYFONTS.COM/FONTS/FONTBUREAU/INTERSTATE/
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890INTERSTATE REGULAR CONDENSED | HTTP://WWW.MYFONTS.COM/FONTS/FONTBUREAU/INTERSTATE/
STANDARD ARROW
NOTE: When rotating arrow, maintain proper dimension as shown above
DARK BLUE
PANTONE 654C
PAINTMatthews MP14019 Tres BlueNuance Satin finish with satin clearcoat
SOA Semi-Gloss finish Striping pattern, ONLY
A
T1
T2
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890INTERSTATE BOLD CONDENSED | HTTP://WWW.MYFONTS.COM/FONTS/FONTBUREAU/INTERSTATE/
T3
MEDIUM BLUE
PANTONE 654C (75%)
PAINTMatthews MP11183Franco BlueNuance Satin finish with satin clearcoat
VINYLCustom match
B RED
PANTONE 484C
PAINTMatthews MP12429 Mehndi RedNuance Satin finish with satin clearcoat
C LIGHT TEAL
PANTONE 5513C
PAINTMatthews MP05783 BerriesNuance Satin finish with satin clearcoat
F
WHITE
PAINTMatthews White
OPAQUE VINYLAvery A6 Opaque Matte White A6002-O
REFLECTIVE VINYLAvery A7 Reflective Matte White A7801-R
G BLACK
PAINTMatthews Black
H
LIGHT GRAY
PANTONE 7534C (75%)
PAINTMatthews MP07273 GraytintNuance Satin finish with satin clearcoat
D TEAL
PANTONE 5483C
PAINTMatthews MP11829 Teal PlasticNuance Satin finish with satin clearcoat
E
OFFICIAL LOGOTYPE
X
X
LOGOTYPE NOTE: Artwork to be provided by designer. Do not scan or trace from this document. Sign Contractor is responsible for final graphics to be approved by client prior to fabrication.
NOTE: Sign Contractor is to reference Design Intent Drawings for which typefaces are used on sign types.Sign Contractor is responsible for purchasing fonts used in this sign program.
GENERAL NOTES
1. Fabricator to determine sign/pole base dimensions, foundations, and breakaway details necessary for structural support, windload, and compliance with City ordinances. All foundations shall be designed and stamped by a professional engineer.
2. For sign attachment to existing poles, fabricator is responsible for proper strapping sizing, spacing, quantity, attachment and engineering. Strapping shown is for graphic and reference purposes only and does not represent final condition(s).
3. Panel thicknesses and connections shown are for design intent only. Fabricator is responsible to ensure all signs are structurally sound and engineered to withstand the appropriate windloads. Notify Designer if modifications are necessary that impact the design intent.
MATERIAL NOTES
1. Reflective vinyl to meet Ohio MUTCD requirements
2. Text contrast to meet Ohio MUTCD requirments
3. Separation of Metals: There shall be no bare aluminum in contact with any other metals, wood or concrete. Contact surfaces shall be separated by a coating of zinc chromate and aluminum paint, or a heavy body bituminous paint or by a gasket.
date 5.22.15 contact project DEL1150 phase Design Intent — Downtown NOT FOR CONSTRUCTIONThese drawings and notes are for the sole purpose of expressing visual design intent and are not intended for actual fabrication purposes. Sign Contractor accepts total responsibility for final material selection, fabrication and installation methods. Electronic files are not construction documents and cannot be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Refer to provided performance specifications for details on designer expectations of Fabricator and fabrication process. Copyright © Studio Graphique, Inc. All rights reserved.
sheet
pm/review Cathy Fromet City of Delaware viiidesign Carrie MoradiSignage and Wayfinding Programtel 216-921-0750
SPECIFICATIONSMATERIALS & COLORS PALETTE
DOWNTOWN DELAWARE SIGN FAMILYScale: 1/2" = 1'-0"
A1 DOWNTOWN TRAILBLAZER
A2 DOWNTOWN PARKING DIRECTIONAL
A3 DOWNTOWN VEHICULAR DIRECTIONAL
B1 DOWNTOWN PARKING IDENTIFICATION
B2 NW NEIGHBORHOOD STREET SIGN TOPPER
historic downtown
PublicParking
historic downtown
delaware
historic downtown
County BldgsMingo Park
Justice Center
Shops & DiningCity Hall
date 5.22.15 contact project DEL1150 phase Design Intent — Downtown NOT FOR CONSTRUCTIONThese drawings and notes are for the sole purpose of expressing visual design intent and are not intended for actual fabrication purposes. Sign Contractor accepts total responsibility for fi nal material selection, fabrication and installation methods.Electronic fi les are not construction documents and cannot be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic fi les is at the user’s sole risk and without liability to Design Professional and its consultants.Refer to provided performance specifi cations for details on designer expectations of Fabricator and fabrication process.Copyright © Studio Graphique, Inc. All rights reserved.
sheet
pm/review Cathy Fromet City of Delaware 1design Carrie MoradiSignage and Wayfi nding Packagetel 216-921-0750
VehICUlaR SIgNageSign Family
A1 DOWNTOWN TRAILBLAZERFRONT ELEVATIONScale: 1/2" = 1'-0"
TOP VIEWScale: 1/2" = 1'-0"
A1 DOWNTOWN TRAILBLAZERBACK ELEVATIONScale: 1/2" = 1'-0"
FACE LAYOUTScale: 1/2" = 1'-0"
THREE SEPARATE PANEL SHAPESScale: 1/2" = 1'-0"
ONE FLAT PANELScale: 1/2" = 1'-0"
PANEL A
PANEL B
PANEL C
historic downtown
delaware
2 1/2" text
1 5/16" text
2'-2"
2'-4"
4" square aluminum post
Breakaway pole connection, Paint to match pole, typical.
1/8" aluminum panels
1/8" circular aluminum panel
1/2" spacer4"
4"
Layered aluminum panel
Back of circular panel
9"
7'-6" mounting
height
C
C
A
AA
D
D
G
G
B
StripesB
Semi-gloss finishA
A
13"circle
6 3/4" arrow
3"
13/16"
7/16"
2'-8"
9'-9"
2" 2"
Stripe pattern artwork to be provided by designer
Panel A
Panel B
Panel C
2'-3 1/2"
MATERIAL/FASTENER NOTES
1. There shall be no bare aluminum in contact with any other metals, wood or concrete. Contact surfaces shall be separated by a coating of zinc chromate and aluminum paint, or a heavy body bituminous paint or by a gasket.
*NOTE: For sign attachment to existing poles, fabricator is responsible for proper strappingsizing, spacing, quantity, attachment and engineering. Fastening shown on new post is for graphic and reference purposes only and does not necessarily represent final condition(s).
Please also quote flattened panel option, graphics are the same
as the layered design
Varies
EQ EQ
Front sign face (facingoncoming vehicular traffic)
Back sign face
90°
Dire
ctio
n of
app
roac
hing
vehi
cula
r tra
vel
Metal banding straps*,loop through metalspacer channel. Shimif necessary to maintainplumb sign face.
Sign panel
Strapping channel*,paint to match panel, typ.
Ø varies
Varies
SIDE ELEVATION
PREFERRED FABRICATION METHOD ALTERNATE FABRICATION METHOD
STRAPPING ATTACHMENT DIAGRAM (FOR MOUNTING TO EXISTING POLES)NOT TO SCALE
Please also quote a black pole as an alternate treatmentto the custom blue
Retroreflective panels
Back of Panel BC
date 5.22.15 contact project DEL1150 phase Design Intent — Downtown NOT FOR CONSTRUCTIONThese drawings and notes are for the sole purpose of expressing visual design intent and are not intended for actual fabrication purposes. Sign Contractor accepts total responsibility for fi nal material selection, fabrication and installation methods.Electronic fi les are not construction documents and cannot be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic fi les is at the user’s sole risk and without liability to Design Professional and its consultants.Refer to provided performance specifi cations for details on designer expectations of Fabricator and fabrication process.Copyright © Studio Graphique, Inc. All rights reserved.
sheet
pm/review Cathy Fromet City of Delaware 2design Carrie MoradiSignage and Wayfi nding Packagetel 216-921-0750
VehICUlaR SIgNageA1 Downtown Trailblazer
A2 DOWNTOWN PARKING DIRECTIONALFRONT ELEVATIONScale: 1/2" = 1'-0"
TOP VIEWScale: 1/2" = 1'-0"
A2 DOWNTOWN PARKING DIRECTIONALBACK ELEVATIONScale: 1/2" = 1'-0"
SIGN FACE LAYOUTScale: 1/2" = 1'-0"
THREE SEPARATE PANEL SHAPESScale: 1/2" = 1'-0"
ONE FLAT PANELScale: 1/2" = 1'-0"
TOP VIEW (2-SIDED APPLICATION)Scale: 1/2" = 1'-0"
PANEL A PANEL B
PANEL C
PREFERRED FABRICATION METHOD ALTERNATE FABRICATION METHOD
7'-6"mounting
height
3'-0"3'-2 3/4"
1'-7 1/2" circle
11 1/2"
11 13/16"6 11/16"
1'-7"
2'-0"
10'-8"
5"
5"
Layered aluminum panels, painted
5" square aluminum post
Breakaway pole connection,Paint to match pole, typical.
MATERIAL/FASTENER NOTES
1. There shall be no bare aluminum in contact with any other metals, wood or concrete. Contact surfaces shall be separated by a coating of zinc chromate and aluminum paint, or a heavy body bituminous paint or by a gasket.
*NOTE: For sign attachment to existing poles, fabricator is responsible for proper strappingsizing, spacing, quantity, attachment and engineering. Fastening shown on new post is for graphic and reference purposes only and does not necessarily represent final condition(s).See Sheet 2 for strapping diagram to existing poles.
2 5/8"
C
C
G
A
A
D
B
3 1/2"
StripesB
Semi-gloss finishA
Back of Panel BC
3 1/8"
3 3/8"
3'-6"
Stripe pattern artwork to be provided by designer
Panel APanel B
Panel C
Please also quote flattened panel option, graphics are the same as the layered design
1/2" spacers behind Panels B & C
1/8" aluminum panels (3)
Panel A
Please also quote a black pole as an alternate treatmentto the custom blue
Retroreflective panel
Retroreflective panel
Panel back treatments are eliminated when sign is 2-sided
date 5.22.15 contact project DEL1150 phase Design Intent — Downtown NOT FOR CONSTRUCTIONThese drawings and notes are for the sole purpose of expressing visual design intent and are not intended for actual fabrication purposes. Sign Contractor accepts total responsibility for fi nal material selection, fabrication and installation methods.Electronic fi les are not construction documents and cannot be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic fi les is at the user’s sole risk and without liability to Design Professional and its consultants.Refer to provided performance specifi cations for details on designer expectations of Fabricator and fabrication process.Copyright © Studio Graphique, Inc. All rights reserved.
sheet
pm/review Cathy Fromet City of Delaware 3design Carrie MoradiSignage and Wayfi nding Packagetel 216-921-0750
VehICUlaR SIgNageA2 Downtown Parking Directional
A3 DOWNTOWN VEHICULAR DIRECTIONALFRONT ELEVATIONScale: 1/2" = 1'-0"
PANEL B SIGN FACE LAYOUT W/ THREEDIRECTIONAL SECTIONSScale: 1/2" = 1'-0"
PANEL AALTERNATE BADGE TREATMENTScale: 1/2" = 1'-0"
TOP VIEWScale: 1/2" = 1'-0"
A3 DOWNTOWN VEHICULAR DIRECTIONALBACK ELEVATIONScale: 1/2" = 1'-0"
historic downtown
County BldgsMingo Park
Justice Center
Shops & DiningCity Hall
County BldgsMingo Park
Justice Center
Shops & DiningCity Hall
Left
alig
nLe
ft a
lign
4'-9"
4'-0"
3'-8"
Decorative base:Hapco, American
5" round aluminum post
Retroreflective panel
5'-7"
13'-0"
7'-6"mounting
height
Layered aluminum panels, paintedAttach panels with concealed fasteners
Stripe pattern artwork
D badge artwork to be provided by designer
1 1/2"
5 1/4"4" text
7"
Vertically center rules between text
1/4" rule
2"
4 1/2"arrow width
2"
3 5/16" linespace b/t
messaging
Right align text corresponding to the right arrow
Vertically center arrows with text
2"
4 1/2"arrow width
2"
C
D B
A
C
G
A
Back of Panel B
A Back of Panel C
5"
5 1/4"
Panel A
Panel B
Panel C
1/8" aluminum panel
1/8" aluminum panel
1/2" spacer
A Please also quote a black pole/decorative base as an alternate treatment to the custom blue
Historic Downtown badge artwork to be provided by designer
Semi-gloss finish
Stripes
5"
Ø 10"
date 5.22.15 contact project DEL1150 phase Design Intent — Downtown NOT FOR CONSTRUCTIONThese drawings and notes are for the sole purpose of expressing visual design intent and are not intended for actual fabrication purposes. Sign Contractor accepts total responsibility for fi nal material selection, fabrication and installation methods.Electronic fi les are not construction documents and cannot be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic fi les is at the user’s sole risk and without liability to Design Professional and its consultants.Refer to provided performance specifi cations for details on designer expectations of Fabricator and fabrication process.Copyright © Studio Graphique, Inc. All rights reserved.
sheet
pm/review Cathy Fromet City of Delaware 4design Carrie MoradiSignage and Wayfi nding Packagetel 216-921-0750
VehICUlaR SIgNageA3 Downtown Vehicular Directional
Public Parking Shops & DiningOhio WesleyanCity Hall
Justice Center
SIGN LAYOUTScale: 1/2" = 1'-0"
PANEL B LAYOUT W/ TWO DIRECTIONAL SECTIONSScale: 1/2" = 1'-0"
THREE SEPARATE PANEL SHAPESScale: 1/2" = 1'-0"
ONE FLAT PANEL Scale: 1/2" = 1'-0"
historic downtown
County BldgsMingo Park
Justice Center
Shops & DiningCity Hall
PANEL A PANEL B PANEL C
1 1/2" textPanel A
Panel B
Panel C
Please also quote flattened panel option, graphics are the same as the layered design
PREFERRED FABRICATION METHOD ALTERNATE FABRICATION METHOD
4 3/16" Parking symbol
1 5/8"
1 5/8" Vertically center symbol with text
date 5.22.15 contact project DEL1150 phase Design Intent — Downtown NOT FOR CONSTRUCTIONThese drawings and notes are for the sole purpose of expressing visual design intent and are not intended for actual fabrication purposes. Sign Contractor accepts total responsibility for fi nal material selection, fabrication and installation methods.Electronic fi les are not construction documents and cannot be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic fi les is at the user’s sole risk and without liability to Design Professional and its consultants.Refer to provided performance specifi cations for details on designer expectations of Fabricator and fabrication process.Copyright © Studio Graphique, Inc. All rights reserved.
sheet
pm/review Cathy Fromet City of Delaware 5design Carrie MoradiSignage and Wayfi nding Packagetel 216-921-0750
VehICUlaR SIgNageA3 Downtown Vehicular Directional
TOP VIEWScale: 1/2" = 1'-0"
TOP VIEW (2-SIDED APPLICATION)Scale: 1/2" = 1'-0"
B1 DOWNTOWN PARKING IDENTIFICATIONFRONT ELEVATION (1- AND 2-SIDED)Scale: 1/2" = 1'-0"
B1 DOWNTOWN PARKING IDENTIFICATIONBACK ELEVATION (1-SIDED, MAY NOT BE NECESSARY)Scale: 1/2" = 1'-0"
historic downtown
PublicParking
historic downtown
PublicParking
TWO SEPARATE PANEL SHAPESScale: 1/2" = 1'-0"
PANEL A
PANEL B
19 3/4" circle
4" cap height
Layered aluminum panels, paintedAttach panels with concealed fasteners
5"
5"1/8" aluminum panel
1/8" aluminum panel 1/8" circular aluminum panel
1/2" spacer
5" square aluminum post
Breakaway pole connection,Paint to match pole, typical.
3'-0"
3'-8"Panel B
3'-8"Panel A
11'-7"
7'-6"
2'-6"
C
C
C
G
A
D
A
StripesB
Semi-gloss finishA
Back of Panel BC
Stripe pattern artwork to be provided by designer
11 3/4"“P”
4'-1"
SIGN FACE LAYOUTScale: 1/2" = 1'-0"
5 5/8"
5"
Panel A
Panel B
A Please also quote a black pole as an alternate treatment to the custom blue
Panel back treatments are eliminated when sign is 2-sided
date 5.22.15 contact project DEL1150 phase Design Intent — Downtown NOT FOR CONSTRUCTIONThese drawings and notes are for the sole purpose of expressing visual design intent and are not intended for actual fabrication purposes. Sign Contractor accepts total responsibility for fi nal material selection, fabrication and installation methods.Electronic fi les are not construction documents and cannot be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic fi les is at the user’s sole risk and without liability to Design Professional and its consultants.Refer to provided performance specifi cations for details on designer expectations of Fabricator and fabrication process.Copyright © Studio Graphique, Inc. All rights reserved.
sheet
pm/review Cathy Fromet City of Delaware 6design Carrie MoradiSignage and Wayfi nding Packagetel 216-921-0750
VehICUlaR SIgNageB1 Downtown Parking Identifi cation
N Washington St
B2 NW NEIGHBORHOOD STREET SIGN TOPPER — 2-SIDEDLAYOUT OPTION 1FRONT ELEVATIONSCALE: 1 1/2" = 1'-0"
B2 STREET SIGN TOPPER — 2-SIDEDLAYOUT OPTION 2 SCALE: 1 1/2" = 1'-0"
B2 STREET SIGN TOPPER — 2-SIDEDLAYOUT OPTION 3 SCALE: 1 1/2" = 1'-0"
Street sign shown for mounting purposes only, sizes will vary
MATERIAL/FASTENER NOTES
1. There shall be no bare aluminum in contact with any other metals, wood or concrete. Contact surfaces shall be separated by a coating of zinc chromate and aluminum paint, or a heavy body bituminous paint or by a gasket.
*NOTE: For sign attachment to poles, fabricator is responsible for proper strapping and bracket sizing, spacing, quantity, attachment and engineering. Strapping and bracket shown are for graphic and reference purposes only and do not represent final condition(s).
Badge artwork is for layout purposes only, revision in progress
14"
1/8" Aluminum panel
date 5.22.15 contact project DEL1150 phase Design Intent — Downtown NOT FOR CONSTRUCTIONThese drawings and notes are for the sole purpose of expressing visual design intent and are not intended for actual fabrication purposes. Sign Contractor accepts total responsibility for final material selection, fabrication and installation methods. Electronic files are not construction documents and cannot be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Refer to provided performance specifications for details on designer expectations of Fabricator and fabrication process. Copyright © Studio Graphique, Inc. All rights reserved.
sheet
pm/review Cathy Fromet City of Delaware 7design Carrie MoradiSignage and Wayfinding Packagetel 216-921-0750
VehICUlaR SIgNageB2 Downtown Street Topper
13110 shaker square suite 101 cleveland, ohio 44120tel 216 921 0750 fax 216 921 0751
planreview
CONTACT
project no.
location revision
dyad/quad revision
date
sheet
Kevin Fromet | [email protected] Fromet | [email protected]
City of Delaware DEL1150
SIGNAGE & WAYFINDING PROGRAM
SYMBOL KEY
DOWNTOWN WAYFINDINGA1 TrailblazerA2 ParkingDirectionalA3 VehicularDirectionalA4 PedestrianDirectional
DOWNTOWN IDENTIFICATIONB1 ParkingIdentificationB2 StreetSignTopper(notshown)
CITY WAYFINDINGC1 TrailblazerC2 PrimaryVehicularDirectionalC3 SecondaryVehicularDirectional
CITY IDENTIFICATIOND1 JurisdictionalGatewayD2 PerceivedGatewayD3 FacilityIdentification
SIGN LOCATION PLAN—RFP #01-15 PLNR3 08.19.15
R4 08.21.15
Final
CLIENTCITY OF DELAWARE1 S Sandusky StDelaware, Ohio 43015tel: 740.203.1600
CONTACTDAVID EFLAND, AICPDirector of Planning & Community Developmentemail: [email protected]
PROJECT ADDRESSCITY OF DELAWAREDelaware, Ohio 43015
SYMBOL LEGEND
A1-D1-001
Sign Type
Color Code
UniqueNumber
Downtown (D) / City (C)Dyad/Quad Location (1–4)
D1/D2
DOWNTOWN KEY
04.30.15
Downtown
LP.O0
D1
D2
MATCH LINEMATCH LINE
13110 shaker square suite 101 cleveland, ohio 44120tel 216 921 0750 fax 216 921 0751
planreview
CONTACT
project no.
location revision
dyad/quad revision
date
sheet
Kevin Fromet | [email protected] Fromet | [email protected]
City of Delaware DEL1150
SIGNAGE & WAYFINDING PROGRAM
SYMBOL KEY
DOWNTOWN WAYFINDINGA1 TrailblazerA2 ParkingDirectionalA3 VehicularDirectionalA4 PedestrianDirectional
DOWNTOWN IDENTIFICATIONB1 ParkingIdentificationB2 StreetSignTopper(notshown)
CITY WAYFINDINGC1 TrailblazerC2 PrimaryVehicularDirectionalC3 SecondaryVehicularDirectional
CITY IDENTIFICATIOND1 JurisdictionalGatewayD2 PerceivedGatewayD3 FacilityIdentification
SIGN LOCATION PLAN—RFP #01-15 PLNR3 08.19.15
R4 08.21.15
Final
CLIENTCITY OF DELAWARE1 S Sandusky StDelaware, Ohio 43015tel: 740.203.1600
CONTACTDAVID EFLAND, AICPDirector of Planning & Community Developmentemail: [email protected]
PROJECT ADDRESSCITY OF DELAWAREDelaware, Ohio 43015
SYMBOL LEGEND
A1-D1-001
Sign Type
Color Code
UniqueNumber
Downtown (D) / City (C)Dyad/Quad Location (1–4)
D1
DOWNTOWN 1VEHICULAR
04.30.15
Downtown
LP.O1
SEE D2
Hayes County Building
Carnegie Library
Arts Castle
Historic NW Neighborhood
Jack Florence Pool
Mingo Park
County Offices
The Strand Theater
Police & Municipal Court Bldg
Delaware County District Library
W. Central Ave. & Vandeman Ave.
W. CENTRAL AVE.
VAN
DEM
AN
AVE.
B1-D1-007
B1-D1-007.1
B1-D1-009
B1-D1-010
A2-D1-018
B1-D1-001
B2-D2-100
B2-D2-101
B2-D2-102
B2-D2-103
B2-D2-104
A3-D1-014
A3-D1-026
A3-D1-016
A3-D1-025
A3-D1-017
A3-D1-017.1
A3-D1-019
A3-D1-002
A3-D1-003
A3-D1-006
A3-D1-005
A3-D1-027
A3-D1-027.1
A3-D1-029
A3-D1-028
A3-D1-022
A3-D1-030
A3-D1-021.1
A3-D1-012
A3-D1-021
A3-D1-023
A3-D1-023.1
A2-D1-013
A1-D1-024
A1-D1-028.1
W. Central Ave. & Vandeman Ave. (see inset below)
STREET SIGN TOPPERS Locations TBD
13110 shaker square suite 101 cleveland, ohio 44120tel 216 921 0750 fax 216 921 0751
planreview
CONTACT
project no.
location revision
dyad/quad revision
date
sheet
Kevin Fromet | [email protected] Fromet | [email protected]
City of Delaware DEL1150
SIGNAGE & WAYFINDING PROGRAM
SYMBOL KEY
DOWNTOWN WAYFINDINGA1 TrailblazerA2 ParkingDirectionalA3 VehicularDirectionalA4 PedestrianDirectional
DOWNTOWN IDENTIFICATIONB1 ParkingIdentificationB2 StreetSignTopper(notshown)
CITY WAYFINDINGC1 TrailblazerC2 PrimaryVehicularDirectionalC3 SecondaryVehicularDirectional
CITY IDENTIFICATIOND1 JurisdictionalGatewayD2 PerceivedGatewayD3 FacilityIdentification
SIGN LOCATION PLAN—RFP #01-15 PLNR3 08.19.15
R4 08.21.15
Final
CLIENTCITY OF DELAWARE1 S Sandusky StDelaware, Ohio 43015tel: 740.203.1600
CONTACTDAVID EFLAND, AICPDirector of Planning & Community Developmentemail: [email protected]
PROJECT ADDRESSCITY OF DELAWAREDelaware, Ohio 43015
SYMBOL LEGEND
A1-D1-001
Sign Type
Color Code
UniqueNumber
Downtown (D) / City (C)Dyad/Quad Location (1–4)
D2
DOWNTOWN 2VEHICULAR
04.30.15
Downtown
LP.O2
SEE D1
City Hall
Selby StadiumOWU
Campus
Sign Contractor must coordinate foundation/footer of this sign with City prior to installation. A larger sign may replace this sign in the future— if necessary, a larger foundation/footer should be poured at this time.
36/37 split
36/37 split(see inset
below)
B1-D2-034
B1-D2-042
A3-D2-031A3-D2-032
A3-D2-040
A3-D2-033
A3-D2-035
A3-D2-044
A2-D2-036A2-D2-036.1
A3-D2-037
A3-D2-039
A3-D2-043.1
A3-D2-043
A3-D2-041
A1-D2-045
A1-D2-030.1
A1-D2-041.1
A1-D2-045.1