Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
DU
PR
O
PR
OFE
SS
ION
AL
WO
OD
WO
RK
ING
www.sinosource.com.cn
CIRCULAR SAW BLADE 1
CONTENTS
CUTTERS & CUTTER HEAD
PLANER&REVERSIBLE KNIVES
PROFILE KNIVES
DOWEL DRILLS
MORTISING AND DRILL BITS
ROUTER BITS
RECIP & JIG SAWS
WOOD CLAMP & ROLLER STAND
12
23
26
33
43
55
66
71
CIRCULAR SAW BLADE
Multi-rip Saw Blade With Raker
250 2.2 3.2 30 18+3 20° 0°F RSR250.30.183
300 2.2 3.2 30 18+3 20° 0°F RSR300.30.183
300 2.2 3.2 70 18+4 20° 0°F RSR300.70.184
350 2.5 3.5 30 20+4 20° 0°F RSR350.30.204
350 2.5 3.5 70 20+4 20° 0°F RSR350.70.204
400 3.0 4.0 30 24+4 20° 0°F RSR400.30.244
400 3.0 4.0 70 24+4 20° 0°F RSR400.70.244
450 3.5 4.5 30 28+4 20° 0°F RSR450.30.284
450 3.5 4.5 70 28+4 20° 0°F RSR450.70.284
20°
15°max.1,5 0° 0°
Z Ref.
Multi-rip Saw Blade
Alternate bevel ground teeth and cooling slot provides excellent cutting performance in dry solid and laminated wood.
Used on Multi-rip machine, single or double spindle saws, sizing saws.
Ø Plate Kerf Bore Hook GroundZ
Z Ref. Ø Plate Kerf Bore Hook GroundZ
MRS250.30.18
MRS300.30.20
MRS300.70.20
MRS350.30.24
MRS350.70.24
MRS400.30.28
MRS400.70.28
5°ATB
5°ATB
5°ATB
5°ATB
5°ATB
5°ATB
5°ATB
20°
20°
20°
20°
20°
20°
20°
18
20
20
24
24
28
28
30
30
70
30
70
30
70
3.2
3.2
3.2
3.5
3.5
4.0
4.0
2.2
2.2
2.2
2.5
2.5
3.0
3.0
250
300
300
350
350
400
400
20°
15°max.1,5 5° 5°
11
Excellent blade with special rakers for ripping cuts in solid wood, dry or wet.
The carbide rakers protect the saw body to guarantee fast and clean cuts.
Used on Multi-rip machines, single or double saws.
CIRCULAR SAW BLADE
Ripping Saw Blade
Alternate bevel ground teeth, aggressive 20° hook make the blade ideal for ripping in hard and soft woods with automatic and manual feeding with low feed force. Manufactured with pin holes suitable for most popular machines.
Universal Saw Blade
Balanced hook and bevel angle design with medium number of teeth allow you to rip and crosscut a wide range of materials, soft & hard wood, plywood, chipboard, laminated board efficiently.
A sizing saw which is necessary for every professional woodworker.
Manufactured with pin holes suitable for most popular machines.
Z Ref. Ø Plate Kerf Bore Hook GroundZ
250 2.2 3.2 30 18 20° 10°ATB RS250.30.18
250 2.2 3.2 30 24 20° 10°ATB RS250.30.24
300 2.2 3.2 30 24 20° 10°ATB RS300.30.24
300 2.2 3.2 30 28 20° 10°ATB RS300.30.28
315 2.2 3.2 30 24 20° 10°ATB RS315.30.24
315 2.2 3.2 30 28 20° 10°ATB RS315.30.28
350 2.2 3.2 30 24 20° 10°ATB RS350.30.24
350 2.2 3.2 30 28 20° 10°ATB RS350.30.28
350 2.2 3.2 30 32 20° 10°ATB RS350.30.32
400 2.5 3.5 30 28 20° 10°ATB RS400.30.28
400 2.5 3.5 30 36 20° 10°ATB RS400.30.36
450 2.8 3.8 30 32 20° 10°ATB RS450.30.32
450 2.8 3.8 30 40 20° 10°ATB RS450.30.40
500 2.8 3.8 30 36 20° 10°ATB RS500.30.36
500 2.8 3.8 30 44 20° 10°ATB RS500.30.44
2/7/42/+2/10/60
Pin Hole
Ø 250-350
Ø 400-500 2/10/60
20°
15°max.1,5 10° 10°
Z Ref. Ø Plate Kerf Bore Hook GroundZ
250 2.2 3.2 30 30 15° 10°ATB UNI250.30.30
250 2.2 3.2 30 40 15° 10°ATB UNI250.30.40
250 2.2 3.2 30 48 15° 10°ATB UNI250.30.48
300 2.2 3.2 30 36 15° 10°ATB UNI300.30.36
300 2.2 3.2 30 48 15° 10°ATB UNI300.30.48
300 2.2 3.2 30 60 15° 10°ATB UNI300.30.60
20°
15°max.1,5 10° 10°
12
CIRCULAR SAW BLADE
Finishing Saw Blade
250 2.2 3.2 30 60 10° 15°ATB FS250.30.60
250 2.2 3.2 30 80 10° 15°ATB FS250.30.80
300 2.2 3.2 30 72 10° 15°ATB FS300.30.72
300 2.2 3.2 30 96 10° 15°ATB FS300.30.96
315 2.2 3.2 30 72 10° 15°ATB FS315.30.72
315 2.2 3.2 30 96 10° 15°ATB FS315.30.96
350 2.5 3.5 30 84 10° 15°ATB FS350.30.84
350 2.5 3.5 30 108 10° 15°ATB FS350.30.108
400 2.5 3.5 30 96 10° 15°ATB FS400.30.96
400 2.5 3.5 30 120 10° 15°ATB FS400.30.120
*low noise blades available upon request
Super fine ground ATB micrograin carbide teeth, high quality steel with perfect tensioning made one by one by hand, makes this high performance blade ideal for cutting all types of materials such as hard wood, plywood, chipboard, MDF, laminated board on most popular industrial machines.
A must for a perfect finish on your project.
315 2.2 3.2 30 48 15° 10°ATB UNI315.30.48
315 2.2 3.2 30 60 15° 10°ATB UNI315.30.60
350 2.5 3.5 30 42 15° 10°ATB UNI350.30.42
350 2.5 3.5 30 54 15° 10°ATB UNI350.30.54
350 2.5 3.5 30 72 15° 10°ATB UNI350.30.72
400 2.5 3.5 30 48 15° 10°ATB UNI400.30.48
400 2.5 3.5 30 60 15° 10°ATB UNI400.30.60
400 2.5 3.5 30 84 15° 10°ATB UNI400.30.84
450 2.8 3.8 30 66 15° 10°ATB UNI450.30.66
500 2.8 3.8 30 72 15° 10°ATB UNI500.30.72
2/7/42/+2/10/60
Pin Hole
Ø 250-350
Ø 400-500 2/10/60
Z Ref. Ø Plate Kerf Bore Hook GroundZ
10°
15°max.1,5 15° 15°
Z Ref. Ø Plate Kerf Bore Hook GroundZ
2/7/42/+2/10/60
Pin Hole
Ø 250-350
Ø 400 2/10/60
13
*low noise blades available upon request
Conical
Adjustable
CIRCULAR SAW BLADE
Scoring Blades
The essential tools for cutting melamine and laminated materials together with Finishing Saw Blade and Laminated Saw Blade, especially for two-side-melamined or laminated boards.
The conical scoring blade provides different cutting width by adjusting the cutting depth.
The adjustable scoring blade makes different cutting width by changing the spacers.
Laminated Saw Blade
200 2.2 3.2 30 64 10° TCG LS200.30.64
220 2.2 3.2 30 64 10° TCG LS220.30.64
250 2.2 3.2 30 60 10° TCG LS250.30.60
250 2.2 3.2 30 80 10° TCG LS250.30.80
300 2.2 3.2 30 72 10° TCG LS300.30.72
300 2.2 3.2 30 96 10° TCG LS300.30.96
315 2.2 3.2 30 72 10° TCG LS315.30.72
315 2.2 3.2 30 96 10° TCG LS315.30.96
350 2.5 3.5 30 84 10° TCG LS350.30.84
350 2.5 3.5 30 108 10° TCG LS350.30.108
A finishing blade with TCG teeth designed specially for laminates, thermoplastic, duroplastic and two sides melamine (with scoring blades).
Z Ref. Ø Plate Kerf Bore Hook GroundZ
2/7/42/
Pin Hole
Ø 200-220
Ø 250-350 2/742/+2/10/60
10°
15°max.1,5 0.3
45°
15°
15°max.1,5
5° 5°
80 2.8/3.6 20 12 15° 5°ATB SC080.20.12
100 3.1/4.0 20 20 15° 5°ATB SC100.20.20
100 3.1/4.1 22 20 15° 5°ATB SC100.22.20
120 3.1/4.0 20 24 15° 5°ATB SC120.20.24
120 3.1/4.0 22 24 15° 5°ATB SC120.22.24
125 3.1/4.0 20 24 15° 5°ATB SC125.20.24
125 3.1/4.0 22 24 15° 5°ATB SC125.22.24
80 2.8/3.6 20 10+10 15° 5°ATB SA080.20.1010
100 2.8/3.6 20 12+12 15° 5°ATB SA100.20.1212
100 2.8/3.6 22 12+12 15° 5°ATB SA100.22.1212
120 2.8/3.6 20 12+12 15° 5°ATB SA120.20.1212
120 2.8/3.6 22 12+12 15° 5°ATB SA120.22.1212
125 2.8/3.6 20 12+12 15° 5°ATB SA125.20.1212
125 2.8/3.6 22 12+12 15° 5°ATB SA125.22.1212
Ref. Ø Kerf Bore Hook GroundZ
14
Adjustable
Conical
*low noise blades available upon request
CIRCULAR SAW BLADE
220 2.2 3.2 30 64 -5° 40°ATB DL220.30.64
250 2.2 3.2 30 80 -2° 40°ATB DL250.30.80
300 2.2 3.2 30 96 2° 40°ATB DL300.30.96
350 2.5 3.5 30 108 5° 40°ATB DL350.30.108
Extra hard micro grain carbide teeth top bevel ground to 40° deliver very sharp cutting on single, double laminates and melamine.
Guarantee a smooth, accurate, chip-free finish.
Excellent to be used on miter saws, chop saws and table saw without scoring blade.
Double Laminated Saw Blade
Spacers For Adjustable Scroing Blade
Ø T Bore Pin Ref.
75
75
75
0.1mm 22 2/4/42 SP7501
0.2mm 22 2/4/42 SP7502
0.4mm 22 2/4/42 SP7504
Z Ref. Ø Plate Kerf Bore Hook GroundZ
2/7/42/Pin Hole Ø 220 Ø 250-350 2/7/42/+2/10/60
-5°
max.1,5
15
40° 40°15°
To be inserted into the adjustable scoring blade to make different cutting widths.
CIRCULAR SAW BLADE
Aluminum Saw Blade
Ø Plate Kerf Bore Z Hook Ground Ref. Pin Hole
250 2.5 3.2 30 80 5°Pos. TCG ASP250.30.80
250 2.5 3.2 32 80 5°Pos. TCG ASP250.32.80
300 2.5 3.2 30 96 5°Pos. TCG ASP300.30.96
300 2.5 3.2 32 96 5°Pos. TCG ASP300.32.96
350 2.5 3.2 30 108 5°Pos. TCG ASP350.30.108
350 2.5 3.2 32 108 5°Pos. TCG ASP350.32.108
400 3.2 3.8 30 108 5°Pos. TCG ASP400.30.108
400 3.2 3.8 32 108 5°Pos. TCG ASP400.32.108
450 3.2 3.8 30 108 5°Pos. TCG ASP450.30.108
450 3.2 3.8 32 108 5°Pos. TCG ASP450.32.108
500 3.4 4.2 30 120 5°Pos. TCG ASP500.30.120
500 3.4 4.2 32 120 5°Pos. TCG ASP500.32.120
250 2.5 3.2 30 80 6°Neg. TCG ASN250.30.80
250 2.5 3.2 32 80 6°Neg. TCG ASN250.32.80
300 2.5 3.2 30 96 6°Neg. TCG ASN300.30.96
300 2.5 3.2 32 96 6°Neg. TCG ASN300.32.96
350 2.5 3.2 30 108 6°Neg. TCG ASN350.30.108
350 2.5 3.2 32 108 6°Neg. TCG ASN350.32.108
400 3.2 3.8 30 108 6°Neg. TCG ASN400.30.108
400 3.2 3.8 32 108 6°Neg. TCG ASN400.32.108
450 3.2 3.8 30 108 6°Neg. TCG ASN450.30.108
450 3.2 3.8 32 108 6°Neg. TCG ASN450.32.108
500 3.4 4.2 30 120 6°Neg. TCG ASN500.30.120
500 3.4 4.2 32 120 6°Neg. TCG ASN500.32.120
2/742/+2/10/60
2/742/+2/10/60
2/742/+2/10/60
2/12/64
2/10/60
2/12/64
2/10/60
2/12/64
2/10/60
2/12/64
2/742/+2/10/60
2/742/+2/10/60
2/742/+2/10/60
2/12/64
2/10/60
2/12/64
2/10/60
2/12/64
2/10/60
2/12/64
High impact resistant teeth with TCG teeth provides smooth cutting without collapsing channel or storm window frames.
Applied for non-ferrous metals and laminates also.
Liquid lubricant recommended during aluminum cutting.
Positive hook designed particularly for thick wall profiles and automatic feed(manual feed is also possible).
Negatives hook designed particularly for thin wall profiles and manual feed(automatic feed is also possible).
16
5°
15°max.1,5
-5°
max.1,5 15°
0.345°
CIRCULAR SAW BLADE
Ø Bore Z Hook Ground Ref. Plate Kerf
192 1.6 2.0 20 40Standard 8° WWF DC192.20.40
192 1.6 2.0 20 48Thin Profile 0° FWF DC192.20.48T
192 1.6 2.0 20 48Aluminum 0° TCG DC192.20.48A
192 1.6 2.0 20 70Stainless 8° E DC192.20.70
230 1.6 2.0 25.4 48Standard 8° WWF DC230.254.48
230 1.6 2.0 25.4 60Aluminium 0° TCG DC230.254.60
230 1.6 2.0 25.4 68Thin Profile 0° FWF DC230.254.68
230 1.6 2.0 25.4 84Stainless 8° E DC230.254.84
255 1.8 2.2 25.4 60Standard 8° WWF DC255.254.60
255 1.8 2.2 25.4 66Stainless 8° E DC255.254.66
305 1.8 2.2 25.4 60Standard 8° WWF DC305.254.60S
305 1.8 2.2 25.4 60Cast iron 2° WWF DC305.254.60C
305 1.8 2.2 25.4 66Thin profile 0° FWF DC305.254.66
355 1.8 2.2 25.4 66Standard 8° WWF DC355.254.66
355 1.8 2.2 25.4 60Cast iron 2° WWF DC355.254.60C
355 1.8 2.2 25.4 60Stainless 8° E DC355.254.60S
355 1.8 2.2 25.4 72Stainless 8° E DC355.254.72
355 1.8 2.2 25.4 90Stainless 8° E DC355.254.90
355 1.8 2.2 25.4 108Aluminum 0° TCG DC355.254.108
192 3800RPM
230 2600RPM
255 1900RPM
305 1500RPM
355 1250RPM
Dry Cutter
17
0.345°
-5°
max.1,5 15°
TCG
FWF
WWF
E
Perfect dry cut on all universal metal chop saws, especially for Jepson machines.
Special ground teeth with micrograin carbide provide a long life and clean cut on all types of materials, Metals, Non-ferrous metals, Compound materials, PVC, Wood.
Please pay attention to the undermentioned maximum RPM.
*low noise blades available upon request.
CIRCULAR SAW BLADE
18
Portable Saw Blade
Universal
15°
15°max.1,5
15° 15°
Rigid steel body, original carbide, big and fine ground teeth build this blade a professional tool for contractors.
Ø Plate
125
130
140
150
150
160
160
160
170
170
170
180
180
180
190
190
190
200
210
210
210
216
220
230
235
235
240
1.4 2.4 20 2/6/32 24 15° 15°ATB PSU125.20.24
1.4 2.4 20 2.6/32 24 15° 15°ATB PSU130.20.24
1.4 2.4 20 2/6/32 24 15° 15°ATB PSU140.20.24
1.6 2.6 16 24 15° 15°ATB PSU150.16.24
1.6 2.6 20 2/6/32 24 15° 15°ATB PSU150.20.24
1.6 2.6 16 24 15° 15°ATB PSU160.16.24
1.6 2.6 20 2/6/32 24 15° 15°ATB PSU160.20.24
1.6 2.6 30 2/7/42 24 15° 15°ATB PSU160.30.24
1.6 2.6 16 24 15° 15°ATB PSU170.16.24
1.6 2.6 20 2/6/32 24 15° 15°ATB PSU170.20.24
1.6 2.6 30 2/7/42 24 15° 15°ATB PSU170.30.24
1.6 2.6 16 24 15° 15°ATB PSU180.16.24
1.6 2.6 20 2/6/32 24 15° 15°ATB PSU180.20.24
1.6 2.6 30 2/7/42 24 15° 15°ATB PSU180.30.24
1.6 2.6 16 24 15° 15°ATB PSU190.16.24
1.6 2.6 20 2/6/32 24 15° 15°ATB PSU190.20.24
1.6 2.6 30 2/7/42 24 15° 15°ATB PSU190.30.24
1.6 2.6 30 2/7/42 24 15° 15°ATB PSU200.30.24
1.8 2.8 16 24 15° 15°ATB PSU210.16.24
1.8 2.8 25 24 15° 15°ATB PSU210.25.24
1.8 2.8 30 2/7/42 24 15° 15°ATB PSU210.30.24
1.8 2.8 30 2/7/42 24 5°Neg. 15°ATB PSU216.30.24
1.8 2.8 30 2/7/42 24 15° 15°ATB PSU220.30.24
1.8 2.8 30 2/7/42 24 15° 15°ATB PSU230.30.24
1.8 2.8 25 2/7/42 24 15° 15°ATB PSU235.25.24
1.8 2.8 30 2/7/42 24 15° 15°ATB PSU235.30.24
1.8 2.8 30 2/7/42 24 15° 15°ATB PSU240.30.24
Kerf Bore Pin Hole Z Hook Ground Ref.
range for both ripping and cross cutting of all kinds of wood materials.
CIRCULAR SAW BLADE
19
Fine cut-off
15°
15°max.1,5
15° 15°
range provide perfect finish with all popular portable machines on all wood materials.
Ø Plate
1.6 2.6 30 48 15° 15°ATB PSF170.30.48
1.6 2.6 16 48 15° 15°ATB PSF180.16.48
1.6 2.6 20 48 15° 15°ATB PSF180.20.48
1.6 2.6 30 48 15° 15°ATB PSF180.30.48
1.6 2.6 16 48 15° 15°ATB PSF190.16.48
1.6 2.6 20 48 15° 15°ATB PSF190.20.48
1.6 2.6 30 48 15° 15°ATB PSF190.30.48
1.6 2.6 30 48 15° 15°ATB PSF200.30.48
1.8 2.8 16 48 15° 15°ATB PSF210.16.48
1.8 2.8 25 48 15° 15°ATB PSF210.25.48
1.8 2.8 30 48 15° 15°ATB PSF210.30.48
1.8 2.8 30 48 5°Neg. 15°ATB PSF216.30.48
1.8 2.8 30 48 15° 15°ATB PSF220.30.48
1.8 2.8 30 48 15° 15°ATB PSF230.30.48
1.8 2.8 25 48 15° 15°ATB PSF235.25.48
1.8 2.8 30 48 15° 15°ATB PSF235.30.48
1.8 2.8 30 48 15° 15°ATB PSF240.30.48
170
180
180
180
190
190
190
200
210
210
210
216
220
230
235
235
240
2/7/42
2/6/32
2/7/42
2/6/32
2/7/42
2/7/42
2/7/42
2/7/42
2/7/42
2/7/42
2/7/42
2/7/42
2/7/42
1.6 2.6 20 48 15° 15°ATB PSF150.20.48
1.6 2.6 16 48 15° 15°ATB PSF160.16.48
1.6 2.6 20 48 15° 15°ATB PSF160.20.48
1.6 2.6 30 48 15° 15°ATB PSF160.30.48
1.6 2.6 16 48 15° 15°ATB PSF170.16.48
1.6 2.6 20 48 15° 15°ATB PSF170.20.48
150
160
160
160
170
170
2/6/32
2/6/32
2/7/42
2/6/32
Kerf Bore Pin Hole Z Hook Ground Ref.
Portable Saw Blade
CIRCULAR SAW BLADE
110
Portable Saw Blade
Aluminum
-6°
max.1,5 15°
0.345°
range designed for efficient dry cutting of Non-ferrous metals, laminates and compound materials.
Kerf Bore Pin Hole Z Hook Ground Ref. Ø Plate
170 1.6 2.6 30 2/7/42 48 TCG PSA170.30.48
180 1.6 2.6 16 48 6°Neg. TCG PSA180.16.48
180 1.6 2.6 20 2/6/32 48 6°Neg. TCG PSA180.20.48
180 1.6 2.6 30 2/7/42 48 6°Neg. TCG PSA180.30.48
190 1.6 2.6 16 54 6°Neg. TCG PSA190.16.54
190 1.6 2.6 20 2/6/32 54 6°Neg. TCG PSA190.20.54
190 1.6 2.6 30 2/7/42 54 6°Neg. TCG PSA190.30.54
200 1.6 2.6 30 2/7/42 54 6°Neg. TCG PSA200.30.54
210 1.8 2.8 16 54 6°Neg. TCG PSA210.16.54
210 1.8 2.8 30 2/7/42 54 6°Neg. TCG PSA210.30.54
216 1.8 2.8 30 2/7/42 60 6°Neg. TCG PSA216.30.60
220 1.8 2.8 30 2/7/42 62 6°Neg. TCG PSA220.30.62
230 1.8 2.8 30 2/7/42 62 6°Neg. TCG PSA230.30.62
235 1.8 2.8 30 2/7/42 62 6°Neg. TCG PSA235.30.62
240 1.8 2.8 30 2/7/42 62 6°Neg. TCG PSA240.30.62
150 1.6 2.6 20 2/6/32 42 6°Neg. TCG PSA150.20.42
160 1.6 2.6 20 2/6/32 42 6°Neg. TCG PSA160.20.42
160 1.6 2.6 30 2/7/42 42 6°Neg. TCG PSA160.30.42
170 1.6 2.6 20 2/6/32 48 6°Neg. TCG PSA170.20.48
6°Neg.
Angle Saw
AS115.222.03
AS125.222.03
AS180.222.06
HR
HR
HR
15°
15°
15°
3
3
6
22.2
22.2
22.2
3.2
3.2
3.2
2.2
2.2
2.2
115
125
180
Z Ref. Ø Plate Kerf Bore Hook GroundZ
20°
15°max.1,5
Strong body with chip limited design, tough carbide teeth with special half round ground,allow you to cut or carve the wood as you want.A fantastic tool for angle grinders.
AS230.222.06HR15°622.23.22.2230
CIRCULAR SAW BLADE
3PCS T.C.T Saw Blade Aluminum Box Set
111
Strong and fit design of the aluminum box provides a perfect protection for the blades.
Three blades assortment including one universal blade, one finishing blade, and onealuminum blades give a complete solution for contractors.
ATS216
216x30x2.8x24Z Neg. PSU216.30.24
216x30x2.8x48Z Neg. PSF216.20.48
216x30x2.8x60Z Neg. Alu. PSA216.30.62
Aluminum case SAB216
ATS235
235x30x2.8x48Z PSF235.20.48
235x30x2.8x62Z Neg. Alu. PSA235.30.62
Aluminum case SAB235
ATS250
250x30x3.2x18Z RS250.30.18
250x30x3.2x48Z UNI250.30.48
250x30x3.2x80Z LS250.30.80
Aluminum case SAB250
ATS300
300x30x3.2x24Z RS300.30.24
300x30x3.2x48Z UNI300.30.48
300x30x3.2x72Z LS300.30.72
Aluminum case SAB250
ATS315
315x30x3.2x24Z RS315.30.24
315x30x3.2x48Z UNI315.30.48
315x30x3.2x72Z LS315.30.72
Aluminum case SAB315
2PCS T.C.T Saw Blade Display Set
Fashion hand carry wood case enable you to choose and keep the blade very easily.
Two blades assortment including one universal blade and one finishing blade, a simple and complete solution for most of the professional woodworking jobs.
DTS190
DTS230
DTS250
DTS300
160x20x2.6x24Z PSU160.20.24
160x20x2.6x48Z PSF160.20.48
Display box SDB160
190x30x2.8x24Z PSU190.30.24
190x30x2.8x48Z PSF190.30.48
Display box SDB190
230x30x2.8x24Z PSU230.30.24
230x30x2.8x48Z PSF230.30.48
Display box SDB230
250x30x3.2x40Z UNI250.30.40
250x30x3.2x80Z FS250.30.80
Display box SDB250
300x30x3.2x48Z UNI300.30.48
DTS160
300x30x3.2x72Z FS300.30.72
Display box SDB300
1
CUTTERS&CUTTER HEAD
12
Rebating And Profile Cutter Head With Spurs
D Bore H Knives Spurs Profile Ref.
90 30 40 2/40x12x1.5 2/14x14x2 40x4
100 30 40 2/40x12x1.5 2/14x14x2 40x4
120 30 40 2/40x12x1.5 2/14x14x2 40x4
120 50 40 2/40x12x1.5 2/14x14x2 40x4
90 30 50 2/50x12x1.5 2/14x14x2 50x5.5
100 30 50 2/50x12x1.5 2/14x14x2 50x5.5
120 30 50 2/50x12x1.5 2/14x14x2 50x5.5
120 50 50 2/50x12x1.5 2/14x14x2 50x5.5
RPH0903040
RPH1003040
RPH1203040
RPH1205040
RPH0903050
RPH1003050
RPH1203050
RPH1205050
Rebating Cutter Head With Spurs
D Bore H Knives Spurs Ref.
85 30 50 2/50x12x1.5 4/14x14x2 RHR085305024
90 30 40 2/50x12x1.5 4/14x14x2 RHR090304024
100 30 30 2/30x12x1.5 4/14x14x2 RHR100303024
100 30 50 2/50x12x1.5 4/14x14x2 RHR100305024
125 30 30 2/30x12x1.5 4/14x14x2 RHR125303024
125 30 50 2/50x12x1.5 4/14x14x2 RHR125305024
125 30 60 2/60x12x1.5 4/14x14x2 RHR125306024
125 50 30 2/30x12x1.5 4/14x14x2 RHR125503024
125 50 50 2/50x12x1.5 4/14x14x2 RHR125505024
125 50 60 2/60x12x1.5 4/14x14x2 RHR125506024
For rebating core and particle boards, ply and hard textured timber with or without plastic covering or veneer, glue timber and profiling in solid timber.
Suitable for spindle moulders with normal rotation speed and automatic feed. Spindle end mounting possible.
Tool body in light aluminum alloy with high tensile strength, chip thickness limit design reduce recoil.
Equipped with 2 TC reversible knives and 4 TC spurs(2spurs each on top and bottom)
D
D
D
D
B
B
B
B
H
H
H
H
For rebating core and particle boards, ply and hard textured timber with or without plastic covering or veneer, glue timber and profiling in solid timber.
Suitable for spindle moulders with normal rotation speed and automatic feed. Spindle end mounting possible.
Tool body in light aluminum alloy with high tensile strength, equipped with TC reversible knives on support plates.
TC spurs with 4 cutting edges on both top and bottom. Knives are positive locked on constant cutting circle.
Profile knives must always be used in pairs. When working with profiled knives 50x5.5mm, dismant support plates and spurs.
CUTTERS&CUTTER HEADCUTTERS&CUTTER HEAD
113
For rebating core and particle boards, ply and hard textured timber with or without plastic covering or veneer, glue timber and profiling in solid timber.
Suitable for spindle moulders with normal rotation speed and automatic feed. Spindle end mounting possible.
Tool body in light aluminum alloy with high tensile strength, chip thickness limit design reduce the recoil.
Equipped with 2 TC reversible knives and 4 TC spurs(2spurs each on top and bottom)
Shear angle cut design for clean cut borders.
Rebating Cutter Head Shear Angle With Spurs
30
50
60
30
50
60
50
60
50
60
30
50
60
30
50
60
50
60
50
60
2/30x12x1.5
2/50x12x1.5
2/60x12x1.5
2/30x12x1.5
2/50x12x1.5
2/60x12x1.5
2/50x12x1.5
2/60x12x1.5
2/50x12x1.5
2/60x12x1.5
4/30x12x1.5
4/50x12x1.5
4/60x12x1.5
4/30x12x1.5
4/50x12x1.5
4/60x12x1.5
4/50x12x1.5
4/60x12x1.5
4/50x12x1.5
4/60x12x1.5
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
4/14x14x2
RHS125303024
RHS125305024
RHS125306024
RHS125503024
RHS125505024
RHS125506024
RHS150306024
RHS150506024
RHS150505024
RHS150506024
RHS125303044
RHS125305044
RHS125306044
RHS125503044
RHS125505044
RHS125506044
RHS150305044
RHS150306044
RHS150505044
RHS150506044
125
125
125
125
125
125
150
150
150
150
125
125
125
125
125
125
150
150
150
150
30
30
30
50
50
50
30
30
50
50
30
30
30
50
50
50
30
30
50
50
125 30 30 4/30x12x1.5 4/14x14x2 RHR125303044
125 30 50 4/50x12x1.5 4/14x14x2 RHR125305044
125 30 60 4/60x12x1.5 4/14x14x2 RHR125306044
125 50 30 4/30x12x1.5 4/14x14x2 RHR125503044
125 50 50 4/50x12x1.5 4/14x14x2 RHR125505044
125 50 60 4/60x12x1.5 4/14x14x2 RHR125506044
D Bore H Knives Spurs Ref.
D Bore H Knives Spurs Ref.
D
B
H
1
CUTTERS&CUTTER HEAD
14
Ref.
Spiral Jointing Cutter Head
62 30 60 10/14x14x2 SJH623006010
62 30 80 12/14x14x2 SJH623008012
80 30 80 12/14x14x2 SJH803008012
80 30 100 16/14x14x2 SJH803010016
80 30 120 18/14x14x2 SJH803012018
80 50 80 12/14x14x2 SJH805008012
80 50 100 16/14x14x2 SJH805010016
80 50 120 18/14x14x2 SJH805012018
Ball bearing
D Bore H Ref.
62 30 16 6206-2RSR
80 50 16 6010-2ZR
Adjustable Bevel Cutter Head
D Bore H Knives
For rough-planing and routing out curved elements on the fence ring by using a template.
For wooden boards or solid timber.
Suitable for spindle moulders or stationary routers with manual feed.
Tool body in light alloy with high tensile strength,chip-thickness limitation, equipped with TC reversible knives,four cutting edges each.
For chamfering in various angles. Suitable for jointing and rebating of woodboards and solid timber by using scribing discs.
Suitable for spindle moulders with manual feed.
Tool body in light aluminum alloy with high tensile strength, chip-thickness limit design reduce the recoil.
Swivel fixtures adjustable on both sides from -90° to +90° in crements of 1° with positive stops at 7.5° with angular scale.
Ref.D Bore H Knives
120
160
160
160
160
170
170
170
170
30
30
50
30
50
30
50
30
50
40
50
50
60
60
50
50
60
60
2/40x12x1.5
2/50x12x1.5
2/50x12x1.5
2/60x12x1.5
2/60x12x1.5
2/50x12x1.5
2/50x12x1.5
2/60x12x1.5
2/60x12x1.5
BCH12030409090
BCH16030509090
BCH16050509090
BCH16030609090
BCH16050609090
BCH17030509090
BCH17050509090
BCH17030609090
BCH17050609090
200 30 80 2/80x13x2.2 BCH20030809090
200 50 80 2/50x13x2.2 BCH20050809090
D
D
Dmax
B
B
B
H
H
CUTTERS&CUTTER HEADCUTTERS&CUTTER HEAD
115
Panel Raising Cutter Head
For flatting on door panels of furniture and kitchen furniture doors. Suitable for solid wood and wooden boards.
Suitable for spindle moulders with manual feed.
Tool body in light aluminum alloy with high tensile strength, chip-thickness limit design.
Equipped with TC reversible knives, four cutting edges each.
Profile No.1 PRK50160201
Profile No.2 PRK50160202
Profile No.3 PRK50160203
For flatting on door panels of furniture and kitchen furniture doors. Suitable for solid wood and wooden boards.
Suitable for spindle moulders with manual feed.
Tool body in steel with high tensile strength, chip-thickness limit design.
Equipped with two brazed TC profile blades.
T.C.T Panel Raising Cutter
Ref.D Bore H Knives
160 30 20 2/50x16x2 PRH1603020
Ref.D Bore H Knives
150 30 14 2 PRC1503014
150 30 30 2 PRC1503030
484848
501
9.4
19
.4
20
D
B
R20
R40
R5R5
R5
16
1
CUTTERS&CUTTER HEAD
16
For rebating, grooving and tenoning jobs in solid wood.
2pcs body in light aluminum alloy with high tensile strength.
Equipped with TC reversible knives and spurs.
Adjustable with intermediate collars, which has to be ordered separately.
Adjustable Groove Cutter Head
D Bore H Knives Spurs Ref.
140 30 14-28 4/13.6x13.6x2 4/13.6x13.6x2 AGH140301428
150 30 14-28 4/13.6x13.6x2 4/13.6x13.6x2 AGH150301428
150 50 14-28 4/13.6x13.6x2 4/13.6x13.6x2 AGH150501428
160 30 14-28 4/13.6x13.6x2 4/13.6x13.6x2 AGH160301428
160 50 14-28 4/13.6x13.6x2 4/13.6x13.6x2 AGH160501428
150 30 20-39 4/19.5x12x1.5 4/14x14x2 AGH150302039
150 50 20-39 4/19.5x12x1.5 4/14x14x2 AGH150502039
170 30 20-39 4/19.5x12x1.5 4/14x14x2 AGH170302039
170 50 20-39 4/19.5x12x1.5 4/14x14x2 AGH170502039
Adjustable Groove Cutter Head
For grooving core and particle boards, plywodd, hard textured timber with or without plastic covering or veneer, glued or solid wood.
Suitable for machines with monaul or mechanical feed.
2pcs body in steel, chip-thickness limit design.
Equipped with TC reversible spurs and raking teeth with four cutting edges each.
Adjustable with intermediate collars which have to be ordered separately.
Work together with Insert cutter to increase the groove width.
120
140
150
Insert cutter
120
140
150
30 4-7.5
30 5-9.5
30 5-9.5
30 7.5
30 9.6
30 9.6
4/18x18x2.45
4/18x18x2.45
4/18x18x2.45
2/7.5X12X1.5
2/9.6x12x1.5
2/9.6x12x1.5
4/14x14x1.2
4/14x14x1.2
4/14x14x1.2
/
/
/
AGH12030047508
AGH14030059508
AGH15030059508
IGH1203075
IGH1403096
IGH1503096
D Bore H Knives Spurs Ref.
D
B
H
tmax
D
B
H
tmax
H
D
tmaxB
CUTTERS&CUTTER HEADCUTTERS&CUTTER HEAD
T.C.T. Adjustable Groove Cutter
For grooving core and particle boards, plywodd, hard textured timber with or without plastic covering or veneer, glued or solid wood.
Suitable for machines with monaul or mechanical feed.
2pcs body in steel, chip-thickness limit design.
Equipped with brazed TC teeth.
Adjustable with intermediate collars which have to be ordered separately.
Work together with Insert cutter to increase the groove width.
Insert cutter
Insert cutter
AGC12030059504
AGC12030059508
AGC15030059508
IGC1203010
IGC1503010
AGC16050040808
AGC16050051008
AGC16050102008
Ref.
Ref.
IGC1605010
Tips
2+2
4+4
4+4
4
4
4+V4
4+V4
4+V4
Tips
2
30 5-9.5
30 5-9.5
30 5-9.5
30 10
30 10
50 4-8
50 5-10
50 10-20
Bore H
Bore H
50 10
120
120
150
120
150
160
160
160
D
D
160
Insert cutter
160
160
180
180
160
160
180
50
50
50
50
50
50
50
4-7.5
5-9.5
4-7.5
5-9.5
7.5
9.6
12
8/18x18x2.95
8/18x18x2.95
8/18x18x2.95
8/18x18x2.95
2/7.5X12X1.5
2/9.6x12x1.5
2/12x12x1.5
4/14x14x1.2
4/14x14x1.2
4/14x14x1.2
4/14x14x1.2
/
/
/
AGH16050047512
AGH16050059512
AGH18050047512
AGH18050059512
IGH1605075
IGH1605096
IGH1805012
D Bore H Knives Spurs Ref.
Ref.Bore HD
Profile Cutter Head 40
Knives
68
78
90
120
120
20
30
30
30
50
40
40
40
40
40
2
2
2
2
2
PCH0682040
PCH0783040
PCH0903040
PCH1203040
PCH1205040
For universal moulding of solid wood. Suitable for spindle moulders with mechanical feed.
Tools body in light aluminum alloy with high tensile strength equipped with SP rebating knives(Profile No.SP000)and chip limiters.
Suitable for profiles knives 40mm high. Profile knives must always be used in pairs.
117
1
CUTTERS&CUTTER HEAD
18
For universal moulding of solid wood. Suitable for spindle moulders with mechanical feed.
Tools body in light aluminum alloy with high tensile strength equipped with SP rebating knives (Profile No.SP000 and Profile No.SP200) and chip limiters.
Suitable for profiles knives 40mm or 50mm high. Profile knives and chip limiters must always be used in pairs.
Safety Profile Cutter Head 40/50
Ref.Bore HD Knives
100 30 40 2 SPH1003040
100 30 50 2 SPH1003050
120 50 40 2 SPH1205040
120 50 50 2 SPH1205050
For universal moulding of solid wood. Suitable for spindle moulders with mechani-cal feed.
Tools body in light aluminum alloy with high tensile strength equipped with SP rebating knives 20mm(Profile No.SP090)
Suitable for profiles knives 90mm high. Profile knives must always be used in pairs.
Ref.Bore HD Knives
Profile Cutter Head 90
90 30 90 2 PCH0903090
120 50 90 2 PCH1205090
H
D
B
For planing and jointing all kind of boards and solid wood.
Suitable for spindle moulders with manual feed.
Tools body in light aluminum alloy equipped with reversible TC knives.
Ref.Bore HD
Planer cutter head
Knives
95 20
30
30
30
50
40
40
40
40
40
4
4
4
4
4
20
30
30
30
50
40
40
40
40
40
4
4
4
4
4
30 40 4
20 40 4
PHR0953040
PHR0953050
PHR0953060
PHR0953080
PHR09530100
PHR09530120
PHR1255040
PHR1255050
PHR1255060
PHR1255080
PHR12550100
PHR12550120125
125
125
125
125
125
95
95
95
95
95
CUTTERS&CUTTER HEADCUTTERS&CUTTER HEAD
119
For planing and jointing all kind of boards and solid wood.
Suitable for spindle moulders with manual feed.
Tools body in light aluminum alloy equipped with reversibleTC knives and spurs.
Safety Profile Cutter Head 40/50
Ref.Bore HD Knives
125 40 4
50 4
50 60 4
PHS1255040
PHS1255050
PHS1255060
PHS1255080
PHS12550100
PHS12550120
80 4
100 4
50 1200 4
125
125
125
125
125
50
50
50
50
Work togerther with cutter heads to copy shaping on spindle moulders.
Guide ring body in light aluminum alloy, ball bearings of industrial quality to guarantee stable working with high rpm.
Ball Bearings and Guide Rings
D D1 B d Ref.
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
55
55
55
55
55
55
55
55
55
55
55
55
55
55
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
GRB07555216
GRB0805516
GRB0855516
GRB0905516
GRB0955516
GRB1005516
GRB1055516
GRB1105516
GRB1155516
GRB1205516
GRB1255516
GRB1305516
GRB1355516
GRB1405516
150
55
55 15
GRB1455516
GRB1505516
D1
D
B
CUTTERS&CUTTER HEADCUTTERS&CUTTER HEAD
1
CUTTERS&CUTTER HEAD
20
D D1 B d Ref.
18
16
16
16
16
16
16
16
16
16
16
16
16
Ball bearing
Ball bearing
80
80
80
80
80
80
80
80
80
80
80
80
80
55
80
90
95
100
105
110
115
120
125
130
135
140
145
150
30
50
GRB0908016
GRB0958016
GRB1008016
GRB1058016
GRB1108016
GRB1158016
GRB1208016
GRB1258016
GRB1308016
GRB1358016
GRB1408016
GRB1458016
GRB1508016
6006-2RSR
6010-2RSR
D1
D
d
Ball Bearings And Guide Rings
Adapt cutter head to fit spindles with different diameters.
Made in steel, black finish.
Must be used in Pairs.
D D1 d Ref.
Bore Reducer
L
55 30 20 5 RBR553020
55 40 30 5 RBR554030
55 50 30 5 RBR555030
55 50 35 5 RBR555035
55 50 40 5 RBR555040
55 30 3/4" 5 RBR553034
55 30 1" 5 RBR553001
Threaded Bore Reducer
Adapt and hold different cutter heads to be one set to fit spindles with different diameters.
Made in Steel, black finish.
D D1 d L Ref.L1
D1
D
d
L4
LL1
d
D
D1
70 50 30 72 42 LBR503042
70 50 30 94 64 LBR503064
70 50 30 116 86 LBR503086
70 50 40 72 42 LBR504072
70 50 40 94 64 LBR504064
70 50 40 116 86 LBR504086
CUTTERS&CUTTER HEADCUTTERS&CUTTER HEAD
121
Spacers
D d Ref.T
45 30 0.1 SP453001
45 30 0.2 SP453002
45 30 0.3 SP453003
45 30 0.4 SP453004
45 30 0.5 SP453005
45 30 0.6 SP453006
45 30 0.7 SP453007
45 30 0.8 SP453008
45 30 0.9 SP453009
45 30 1 SP453010
45 30 2 SP453020
45 30 3 SP453030
45 30 4 SP453040
45 30 5 SP453050
45 30 6 SP453060
45 30 7 SP453070
45 30 8 SP453080
45 30 9 SP453090
45 30 10 SP4530100
45 30 15 SP4530150
45 30 20 SP4530200
45 30 25 SP4530250
45 30 30 SP4530300
45 30 40 SP4530400
45 30 50 SP4530500
45 30 0.1 SP453001
D d Ref.T
55 40 0.1 SP554001
55 40 0.2 SP554002
55 40 0.3 SP554003
55 40 0.4 SP554004
55 40 0.5 SP554005
55 40 0.6 SP554006
55 40 0.7 SP554007
55 40 0.8 SP554008
55 40 0.9 SP554009
55 40 1 SP554010
55 40 2 SP554020
55 40 3 SP554030
55 40 4 SP554040
55 40 5 SP554050
55 40 6 SP554060
55 40 7 SP554070
55 40 8 SP554080
55 40 9 SP554090
55 40 10 SP5540100
55 40 15 SP5540150
55 40 20 SP5540200
55 40 25 SP5540250
55 40 30 SP5540300
55 40 40 SP5540400
55 40 50 SP5540500
D d Ref.T
70 50 0.1 SP705001
70 50 0.2 SP705002
70 50 0.3 SP705003
70 50 0.4 SP705004
70 50 0.5 SP705005
70 50 0.6 SP705006
70 50 0.7 SP705007
70 50 0.8 SP705008
70 50 0.9 SP705009
70 50 1 SP705010
70 50 2 SP705020
70 50 3 SP705030
70 50 4 SP705040
70 50 5 SP705050
70 50 6 SP705060
70 50 7 SP705070
70 50 8 SP705080
70 50 9 SP705090
70 50 10 SP7050100
70 50 15 SP7050150
70 50 20 SP7050200
70 50 25 SP7050250
70 50 30 SP7050300
70 50 40 SP7050400
70 50 50 SP7050500
0.1
D
d
T
Put on the spindles to set the right distance between cutter heads.
Made in steel, black finish.
CUTTERS&CUTTER HEADCUTTERS&CUTTER HEAD
1
CUTTERS&CUTTER HEAD
22
Spacer Set
D Ref.d T
45 30 0.1/0.2/0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0 SPS453001
45 30 1/2/3/4/5/6/7/8/9/10 SPS453002
45 30 1/2/3/4/5/10/15/20/30/40 SPS453003
55 40 0.1/0.2/0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0 SPS554001
55 40 1/2/3/4/5/6/7/8/9/10 SPS554002
55 40 1/2/3/4/5/10/15/20/30/40 SPS554003
70 50 0.1/0.2/0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0 SPS705001
70 50 1/2/3/4/5/6/7/8/9/10 SPS705002
70 50 1/2/3/4/5/10/15/20/30/40 SPS705003
Moulder Chuck
Screw Hex Ref.
M14x200 6 MCM1420006
M14x200 8 MCM1420008
M16x200 6 MCM1620006
M16x200 8 MCM1620008
Ref.
Sleeve And Screw
B H Screw
30 18 M14x200 SSM143018
Put on the spindles to set the right distance between cutter heads.
Made in steel, black finish.
Fit cutter heads on the spindle.
Made in steel, black finish.
Fit cutter heads on the spindle.
Made in steel, black finish.
D
d
T
PLANER&REVERSIBLE KNIVES
Micro-grain carbide knives developed for cutter heads and groove cutters for cutting, grooving and rebating with long life.
Disposable system drive to the lowest cost per cut.
Ref.
Reversible Knives
L W T
Two edges
7.5 12 1.5 RVK1215075
9.6 12 1.5 RVK1215096
11.6 12 1.5 RVK1215116
15 12 1.5 RVK1215150
19.5 12 1.5 RVK1215195
Two edges
25 12 1.5 RVK1215250
30 12 1.5 RVK1215300
40 12 1.5 RVK1215400
50 12 1.5 RVK1215500
60 12 1.5 RVK1215600
80 13 2.2 RVK1215800
100 13 2.2 RVK12151000
120 13 2.2 RVK12151200
Four edges
39.6 12 1.5 RVK12015396
Four edges
12 12 1.5 RVK12012015
Four edges
13.6 13.6 2 RVK13613620
14 14 1.2 RVK14014012
14 14 2 RVK14014020
14.3 14.3 2.5 RVK14314325
15 15 2.5 RVK15015025
Four cutters
18 18 1.95 RVK180180195
18 18 2.45 RVK180180245
18 18 2.95 RVK180180295
Three edges
22 19 2 RVK22019020
20 12 1.5 RVK1215200
123
W
L T
W
L T
W
L T
W
L T
W
L
T
T
W
L
L
W
T
Disposable carbide knives with two cutting edges. No need for resharpening. General purpose especially for hard wood. Popular solution to replace classic planers with low cost and high quality.
Reversible Planer Knives
Ref.L W T
75 5.5 1.1 RVP5511075
78 5.5 1.1 RVP5511078
80 5.5 1.1 RVP5511080
80 5.9 1.2 RVP5912080
82 5.5 1.1 RVP5511082
82.7 5.5 1.2 RVP5512827
92 5.5 1.1 RVP5511092
102 5.5 1.1 RVP5511102
Classic and efficient tool used for planers, made in hardened H.S.S orCarbide tipped. The cutting edges overpassing the cutter head should be between 0.8-1.0mm, bigger overpassing may cause broken of knives.
L W T
Long Planer Knives
H.S.S T.C.T
136
150
150
186
200
200
210
210
210
260
260
260
260
300
310
310
25
20
30
30
20
30
20
30
30
20
20
25
30
30
20
25
2.5
2.5
3.0
3.0
2.5
3.0
2.5
2.5
3.0
2.5
3.0
3.0
3.0
3.0
2.5
3.0
PKH2525136
PKH2025150
PKH3030150
PKH3030186
PKH2025200
PKH3030200
PKH2025210
PKH3025210
PKH3030210
PKH2025260
PKH2030260
PKH2530260
PKH3030260
PKH3030300
PKH2025310
PKH2530310
PKT2525136
PKT2025150
PKT3030150
PKT3030186
PKT2025200
PKT3030200
PKT2025210
PKT3025210
PKT3030210
PKT2025260
PKT2030260
PKT2530260
PKT3030260
PKT3030300
PKT2025310
PKT2530310
PLANER&REVERSIBLE KNIVES
124
L
W
T
L W T H.S.S T.C.T
360 25 2.5 PKH2525360 PKT2525360
360 30 3.0 PKH3030360 PKT3030360
410 25 2.5 PKH2525410 PKT2525410
410 25 3.0 PKH2530410 PKT2530410
410 30 2.5 PKH3025410 PKT3025410
410 30 3.0 PKH3030410 PKT3030410
410 35 3.0 PKH3530410 PKT3530410
420 25 2.5 PKH2525420 PKT2525420
420 25 3.0 PKH2530420 PKT2530420
420 30 2.5 PKH3025420 PKT3025420
420 30 3.0 PKH3030420 PKT3030420
420 35 3.0 PKH3530420 PKT3530420
510 25 2.5 PKH2525510 PKT2525510
510 30 2.5 PKH3025510 PKT3025510
510 30 3.0 PKH3030510 PKT3030510
510 35 3.0 PKH3530510 PKT3530510
520 25 2.5 PKH2525520 PKT2525520
520 25 3.0 PKH2530520 PKT2530520
520 30 2.5 PKH3025520 PKT3025520
520 30 3.0 PKH3030520 PKT3030520
520 35 3.0 PKH3530520 PKT3530520
530 25 2.5 PKH2525530 PKT2525530
530 25 3.0 PKH2530530 PKT2530530
530 30 2.5 PKH3025530 PKT3025530
530 30 3.0 PKH3030530 PKT3030530
530 35 3.0 PKH3530530 PKT3530530
600 30 3.0 PKH3030600 PKT3030600
610 25 2.5 PKH2525610 PKT2525610
610 25 3.0 PKH2530610 PKT2530610
610 30 2.5 PKH3025610 PKT3025610
610 30 3.0 PKH3030610 PKT3030610
610 35 3.0 PKH3530610 PKT3530610
310
320
350
30
30
30
3.0
3.0
3.0
PKH3030310
PKH3030320
PKH3030350
PKT3030310
PKT3030320
PKT3030350
PLANER&REVERSIBLE KNIVES
125
126
PROFILE KNIVES
Best knives to make any profiles, special sharpened edge assure you a perfert finish without any more polishing works.
Profile Knives
40MMX4MM SP000-SP130 SP170-SP177
SP000 SP001
SP003SP002
SP005SP004
SP006 SP007
SP009SP008
SP010 SP011
SP013SP012
SP014 SP015
SP016 SP017
SP019SP018
Art no. Art no. Art no. Art no.
SP020
SP022 SP023
SP021 SP030
SP032 SP033
SP031
Art no. Art no. Art no. Art no.
127
PROFILE KNIVES
SP024 SP025
SP028
SP027
SP029
SP034 SP035
SP036 SP037
SP038 SP039
SP040 SP041
SP043SP042
SP044 SP045
SP046
SP048 SP059
SP047
SP049
SP057
SP055
SP053
SP051SP050
SP052
SP054
SP056
SP058
Art no. Art no. Art no. Art no.
SP026
Art no. Art no. Art no. Art no.
128
PROFILE KNIVES
SP060 SP061
SP063SP062
SP064 SP065
SP067SP066
SP068 SP069
SP070 SP071
SP072 SP073
SP075SP074
SP076 SP077
SP078 SP079
SP089SP088
SP090 SP091
SP093SP092
SP080 SP081
SP082 SP083
SP085SP084
SP086 SP087
Art no. Art no. Art no. Art no.
Art no. Art no. Art no. Art no.
129
PROFILE KNIVES
SP096 SP097
SP099SP098
SP100 SP101
SP103SP102
SP104 SP105
SP107SP106
SP108 SP109
SP111SP110
SP112 SP113
SP115SP114
SP116 SP117
SP118 SP119
SP121SP120
SP122
Art no. Art no. Art no. Art no.
Art no. Art no. Art no. Art no.
SP094 SP095
130
PROFILE KNIVES
50x5mm SP200-SP259/SP293
SP170 SP171
SP173SP172
SP174 SP175
SP177SP176
SP200 SP201
SP203SP202
SP204 SP205
SP207SP206
SP208 SP209
SP210 SP211
SP213SP212
SP214 SP215
SP217SP216
SP218 SP219
Art no. Art no. Art no. Art no.
Art no. Art no. Art no. Art no.
131
PROFILE KNIVES
SP220 SP221
SP223SP222
SP224 SP225
SP227SP226
SP228 SP229
SP230 SP231
SP233SP232
SP234 SP235
SP237SP236
SP238 SP239
SP240 SP241
SP243SP242
SP244 SP245
SP247SP246
SP248 SP249
SP250 SP251
SP252 SP253
SP255SP254
SP256 SP257
SP259SP258
Art no. Art no. Art no. Art no.
Art no. Art no. Art no. Art no.
132
PROFILE KNIVES
90MMX5.5MM
SP090 SP299SP134
SP301 SP302 SP303
SP322SP323
SP351SP352 SP353
SP304SP305 SP306
Art no. Art no. Art no. Art no.
2 FLUTE DOWEL DRILLS
Ref.Ref.Right-hand rotation Left-hand rotation
D ICutting diameter Cutting length
mm inches mm mm
S=Ø10x27mm I=27mm L=57.5mm Series T.C.T.200
Spare parts
224.5* 200.045.00 200.045.01
5 200.050.00 200.050.0127
5.1 200.051.00 200.051.0127
5.2 200.052.00 200.052.0127
6 200.060.00 200.060.0127
6.5 200.065.00 200.065.0127
7 200.070.00 200.070.0127
8 200.080.00 200.080.0127
8.2 200.082.00 200.082.0127
9 200.090.00 200.090.0127
10 200.100.00 200.100.0127
11 200.110.00 200.110.0127
12 200.120.00 200.120.0127
13 200.130.00 200.130.0127
14 200.140.00 200.140.0127
15 200.150.00 200.150.0127
16 200.160.00 200.160.0127
184* 200.040.00 200.040.015/32
274.76 200.047.00 200.047.013/16
5.55 200.055.00 200.055.01277/32
6.35 200.064.00 200.064.01271/4
9.52 200.095.00 200.095.01273/8
12.7 200.127.00 200.127.01271/2
Screw M5x10mm 210.050.10
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm
S=Ø10x34mm I=18mm L=57.5mm Series T.C.T.201
5 18
6
7
8
10
201.050.00 201.050.01
201.060.00 201.060.01
201.070.00 201.070.01
201.080.00 201.080.01
201.100.00 201.100.01
Individually boxed
Individually boxed
133
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
LTotal length
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
ICutting length
mm mm
LTotal length
18
18
18
18
57.5
57.5
57.5
57.5
57.5
Individually boxed
Individually boxed
Ref.Ref.Right-hand rotation Left-hand rotation
D ICutting diameter Cutting length
mm inches mm
ICutting length
mm
S=Ø10x30mm I=35mm L=70mm Series T.C.T.202
Spare parts
26 70
35 70
4*
4.5*
4.76
5
5.1
5.2
5.55
6
6.35
6.5
7
8
8.2
9
9.52
10
11
12
12.7
13
14
15
16
202.040.00
202.045.00
202.047.00
202.050.00
202.051.00
202.052.00
202.055.00
202.060.00
202.064.00
202.065.00
202.070.00
202.080.00
202.082.00
202.090.00
202.095.00
202.100.00
202.110.00
202.120.00
202.127.00
202.130.00
202.140.00
202.150.00
202.160.00
202.040.01
202.045.01
202.047.01
202.050.01
202.051.01
202.052.01
202.055.01
202.060.01
202.064.01
202.065.01
202.070.01
202.080.01
202.082.01
202.090.01
202.095.01
202.100.01
202.110.01
202.120.01
202.127.01
202.130.01
202.140.01
202.150.01
202.160.01
5/32
3/16
7/32
1/4
3/8
1/2
Ref.Right-hand rotation
DCutting diameter
mm
S=Ø10x30mm I=44mm L=77mm Series T.C.T.203
5
6
7
8
10
203.040.00 203.040.01
203.047.00 203.047.01
203.050.00 203.050.01
203.051.00 203.051.01
203.052.00 203.052.01
*Cutting length 26 mm
12 203.055.00 203.055.01
2 FLUTE DOWEL DRILLS
134
Ref.Left-hand rotation
Screw M5x10mm 210.050.10
Spare parts
Screw M5x10mm 210.050.10
35 70
35 70
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
44
44
44
44
44
44
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
LTotal length
mm
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
77
77
77
77
LTotal length
mm
77
77
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm inches
S=Ø8x20mm I=30mm L=55.5mm Series T.C.T.211
5
5.55
6
6.35
7
8
9
10
12
211.050.00 211.050.01
211.055.00 211.055.01
211.060.00 211.060.01
211.064.00 211.064.01
211.070.00 211.070.01
211.080.00 211.080.01
211.090.00 211.090.01
211.100.00 211.100.01
211.120.00 211.120.01
7/32
1/4
Individually boxed
Individually boxed
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm inches
S=Ø8x20mm I=40mm L=67mm Series T.C.T.212
212.050.00 212.050.01
212.055.00 212.055.01
212.060.00 212.060.01
212.064.00 212.064.01
212.070.00 212.070.01
212.080.00 212.080.01
212.090.00 212.090.01
212.095.00 212.095.01
212.100.00 212.100.01
212.120.00 212.120.01
5
5.55
6
6.35
7
8
9
10
7/32
1/4
12
9.52 3/8
Spare parts
Screw M5x10mm 210.050.10
135
4 FLUTE DOWEL DRILLS
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
ICutting length
mm
LTotal length
mm
ICutting length
mm
LTotal length
mm
30
30
30
30
30
30
30
30
30
55.5
55.5
55.5
55.5
55.5
55.5
55.5
55.5
55.5
40
40
40
40
40
40
40
40
40
40
67
67
67
67
67
67
67
67
67
67
Ref.Ref.Right-hand rotation Left-hand rotation
D ICutting diameter Cutting length
mm inches mm
S=Ø10x20mm I=30mm L=57.5mm Series T.C.T.213
264*
5
6
6.35
7
8
9
9.52
10
213.040.00
213.050.00
213.060.00
213.064.00
213.070.00
213.080.00
213.090.00
213.093.00
213.100.00
213.110.00
213.120.00
213.127.00
213.130.00
213.140.00
213.150.00
213.160.00
5/32
1/4
*Cutting length 26 mm
Spare parts
Screw M5x10mm 210.050.10
11
12
12.7
13
14
15
16
3/8
1/2
213.040.01
213.050.01
213.060.01
213.064.01
213.070.01
213.080.01
213.090.01
213.093.01
213.100.01
213.110.01
213.120.01
213.127.01
213.130.01
213.140.01
213.150.01
213.160.01
Right-hand rotation Left-hand rotation
D ICutting diameter Cutting length
mm inches mm
S=Ø10x20mm I=43mm L=70mm Series T.C.T.214
4*
5
6
6.35
7
8
9
9.52
10
214.040.00
214.050.00
214.060.00
214.064.00
214.070.00
214.080.00
214.090.00
214.093.00
214.100.00
214.110.00
214.120.00
214.127.00
214.130.00
214.140.00
214.150.00
214.160.00
5/32
1/4
*Cutting length 26 mm
11
12
12.7
13
14
15
16
3/8
1/2
214.040.01
214.050.01
214.060.01
214.064.01
214.070.01
214.080.01
214.090.01
214.093.01
214.100.01
214.110.01
214.120.01
214.127.01
214.130.01
214.140.01
214.150.01
214.160.01Individually boxed
Individually boxed
136
Ref.Ref.
4 FLUTE DOWEL DRILLS
9
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Double flutes help to improve the finishing a lot.
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Double flutes help to improve the finishing a lot.
LTotal length
mm
LTotal length
mm
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
70
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
26
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm
S=Ø10x27mm I=50mm L=85mm Series T.C.T.215
5*
6
8
10
12
215.050.00 215.050.01
215.060.00 215.060.01
215.080.00 215.080.01
215.100.00 215.100.01
215.120.00 215.120.01
Individually boxed
Spare parts
Screw M5x10mm 210.050.10
137
4 FLUTE DOWEL DRILLS
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Double flutes help to improve the finishing a lot.
LTotal length
mm
ICutting length
mm
50
50
50
50
50
85
85
85
85
85
Ref.Ref.Right-hand rotation Left-hand rotation
D3 DFor bit diam. Cutting diam.
mm mm mm
Countersinks for 4 flute drills Series T.C.T.218
16
16
16
4
5
6
7
8
9
12
218.040.00 218.040.01
218.050.00 218.050.01
218.060.00 218.060.01
218.064.00 218.064.01
218.070.00 218.070.01
218.080.00 218.080.01
218.090.00 218.090.01
218.095.00 218.095.01
16
18
18
20
20
10
Spare parts
Screw M5x5mm 210.050.10
Allen key 2.5mm 210.025.10
Assembly of countersink item 218 on 4 flute spiral bits >
The countersink is assembled to the spiral portion of the bit as shown here in illustration 1 regulated to the desired height.
The countersink can be clamped to any point along the spiral portion according to the depth of the bore desired.
The countersink is clamped in place-the screw must line up with the shallower flutes in such a way that the cutting edge of the countersink will be in line with the cutting edge of the spiral. See illustration 2 and 3.
Ref.Ref.Right-hand rotation Left-hand rotation
Countersinks for 2 flute drills Series T.C.T.209
20
22
Form 5 to 10 209.200.00 209.200.01
209.220.00 209.220.01Form 11 to 12
Spare parts
Screw M5x5mm 210.050.10
Allen key 2.5mm 210.025.10
DOWEL DRILL WITH COUNTERSINK
138
For assembly on the spiral head of the bits to adjust boring depth, for use with bits 211-212-213-214-215-216-217.
The countersink can be clamped to any point along the spiral portion according to the depth of the bore desired.
Made in steel, black finish equipped with two brazed TC knives.
For assembly on the spiral head of the bits to adjust boring depth, for use with bits 200-201-202-203. The countersink can be clamped to any point along the spiral portion according to the depth of the bore desired.Made in steel, black finish equipped with two brazed TC knives.
H
D3 DFor bit diam. Cutting diam.
mm mm mm
H
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm
S=Ø10x26mm I=27mm L=57.5mm Series T.C.T.204
5
6
8
10
204.050.00 204.050.01
204.060.00 204.060.01
204.080.00 204.080.01
204.100.00 204.100.01
Ref.Ref.Right-hand rotation Left-hand rotation
Cutting diametermm inches
S=Ø10x26mm I=35mm L=70mm Series T.C.T.205
205.040.00 205.040.01
205.047.00 205.047.01
205.050.00 205.050.01
205.055.00 205.055.01
205.060.00 205.060.01
205.064.00 205.064.01
205.070.00 205.070.01
205.080.00 205.080.01
4
4.76
5
5.55
6
6.35
7
9
7/32
1/4
9.52
8
3/8
Individually boxed
Individually boxed
For panels with a 20mm maximum thickness
10
205.127.00 205.127.01
12
12.7
5/32
3/16
1/2
ICutting length
mm
30
35
35
35
35
35
35
35
35
35
35
35
35
205.095.00 205.095.01
205.100.00 205.100.01
205.120.00 205.120.01
205.090.00 205.090.01
For panels with a 30mm maximum thickness
*Cutting length 30 mm
2 FLUTE DOWEL DRILLS FORTHROUGH HOLES
139
D
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
LTotal length
mm
ICutting length
mm
LTotal length
mm
70
70
70
70
70
70
70
70
70
70
70
70
70
27
27
27
27
57.5
57.5
57.5
57.5
Individually boxed
Individually boxed
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm
S=Ø10x26mm I=44mm L=77mm Series T.C.T.206
5
6
8
10
206.050.00 206.050.01
206.060.00 206.060.01
206.080.00 206.080.01
206.100.00 206.100.01
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm
S=Ø8x20mm I=30mm L=56mm Series T.C.T.207
207.050.00 207.050.01
207.080.00 207.080.01
5
8
For panels with a 30mm maximum thickness
12 206.120.00 206.120.01
Spare parts
Screw M5x10mm 210.050.10
For panels with a 40mm maximum thickness
140
2 FLUTE DOWEL DRILLS FORTHROUGH HOLES
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
LTotal length
mm
ICutting length
mm
44
44
44
44
44
77
77
77
77
77
LTotal length
mm
ICutting length
mm
30
30
56
56
Individually boxed
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm
S=Ø8x20mm I=43mm L=70mm Series T.C.T.208
5
6
7
8
208.050.00 208.050.01
208.060.00 208.060.01
208.070.00 208.070.01
208.080.00 208.080.01
Spare parts
Screw M5x10mm 210.050.10
For panels with a 40mm maximum thickness
141
2 FLUTE DOWEL DRILLS FORTHROUGH HOLES
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
LTotal length
mm
ICutting length
mm
43
43
43
43
70
70
70
70
Individually boxed
Individually boxed
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm
S=Ø10x20mm I=30mm L=57.5mm Series T.C.T.216
5
8
216.050.00 216.050.01
216.080.00 216.080.01
For panels with a 30mm maximum thickness
Ref.Ref.Right-hand rotation Left-hand rotation
DCutting diameter
mm
S=Ø10x20mm I=40mm L=70mm Series T.C.T.217
5
6
7
8
217.050.00 217.050.01
217.060.00 217.060.01
217.070.00 217.070.01
217.080.00 217.080.01
10 217.100.00 217.100.01
Spare parts
Screw M5x10mm 210.050.10
For panels with a 40mm maximum thickness
142
4 FLUTE DOWEL DRILLS FORTHROUGH HOLES
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Double flutes help to improve the finishing a lot.
Solid carbide tips made by micro-grain carbide, precisely sharpened to guarantee excellent boring.
Used on boring machines equipped with adaptors or chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.
Double flutes help to improve the finishing a lot.
LTotal length
mm
ICutting length
mm
LTotal length
mm
ICutting length
mm
30
30
57.5
57.5
40 70
40
40
40
40
70
70
70
70
Mortising Bits Helical
High performance bits with double cutters, chip-breaking grooves.
Available for both right and left hand cutting.
Made in special alloy steel all ground.
For mortising machines to make perfect slot.
Straight Shank
Ref.(Right)
MBH0606R
MBH0707R
MBH0808R
MBH0909R
MBH1010R
MBH1111R
MBH1212R
MBH1414R
MBH1515R
MBH1616R
MBH0613R
MBH0813R
MBH1013R
MBH1213R
MBH1313R
MBH1413R
MBH1613R
MBH1813R
MBH2013R
MBH2213R
MBH0616R
MBH0816R
MBH1016R
MBH1216R
MBH1316R
MBH1416R
MBH1616R
MBH1816R
MBH2016R
MBH2216R
Ref.(Left)
MBH0606L
MBH0707L
MBH0808L
MBH0909L
MBH1010L
MBH1111L
MBH1212L
MBH1414L
MBH1515L
MBH1616L
MBH0613L
MBH0813L
MBH1013L
MBH1213L
MBH1313L
MBH1413L
MBH1613L
MBH1813L
MBH2013L
MBH2213L
MBH0616L
MBH0816L
MBH1016L
MBH1216L
MBH1316L
MBH1416L
MBH1616L
MBH1816L
MBH2016L
MBH2216L
TL SD WL
6
7
8
9
10
11
12
13
13
13
13
13
13
13
13
13
13
13
13
13
16
16
16
16
16
16
16
16
16
16
110
110
110
125
125
125
125
135
135
135
120
130
140
150
160
160
170
180
185
190
120
130
140
150
160
160
170
180
185
190
50
50
50
50
50
50
50
60
60
60
36
40
45
50
56
56
63
67
71
75
36
40
45
50
56
56
63
67
71
75
6
7
8
9
10
11
12
14
15
16
6
8
10
12
13
14
16
18
20
22
6
8
10
12
13
14
16
18
20
22
Shank 13mm
Shank 16mm
LeftRight
D S
WL
TL
143
MORTISING AND DRILL BITS
Mortising Bits Straight
Conventional mortising bits with two flutes, chip-breaking grooves.
Available for both right and left hand cutting.
Made in alloy steel for mortising machines.
Shank 13mm
6 50 110 6 MBS0606L MBS0606R
8 55 120 8 MBS0808L MBS0808R
10 55 120 10 MBS1010L MBS1010R
12 60 150 12 MBS1212L MBS1212R
14 60 150 14 MBS1414L MBS1414R
16 60 150 16 MBS1616L MBS1616R
6 50 110 13 MBS0613L MBS0613R
8 55 120 13 MBS0813L MBH0813R
10 55 120 13 MBS1013L MBH1013R
12 60 150 13 MBS1213L MBH1213R
14 60 150 13 MBS1413L MBH1413R
16 60 150 13 MBS1613L MBH1613R
Straight mortising bits 6pcs set
Ø 6, 8,10,12,14,16/Shank straight MBS06160600
Ø 6, 8,10,12,14,16/Shank 13mm MBS06160613
Helical mortising bits 5pcs set
Helical mortising bits 6pcs set
Ø 6, 8,10,12,14/Shank straight MBH06140500
Ø 6, 8,10,12,14/Shank 13mm MBH06140513
Ø 6, 8,10,12,14/Shank 16mm MBH06140516
MBH06160600
MBH06160613
Ø 6, 8,10,12,14,16/Shank straight
Ø 6, 8,10,12,14,16/Shank 13mm
Ø 6, 8,10,12,14,16/Shank 16mm MBH06160616
LeftRightD
S
TL
WL
Ref.(Right)Ref.(Left)TL SD WL
144
MORTISING AND DRILL BITS
6 45 135 15.88(5/8") SMC0658
8 50 140 15.88(5/8") SMC0858
10 60 140 15.88(5/8") SMC1058
12 70 140 15.88(5/8") SMC1258
14 75 140 15.88(5/8") SMC1458
15 95 160 15.88(5/8") SMC1558
16 95 160 15.88(5/8") SMC1658
18 95 160 15.88(5/8") SMC1858
20 95 160 15.88(5/8") SMC2058
25 95 160 15.88(5/8") SMC2558
30 95 160 15.88(5/8") SMC3058
6 45 210 SMD0658
8 50 SMD0858
10 60 SMD1058
12 70 SMD1258
14 75 SMD1458
15 95 SMD1558
16 95 SMD1658
18 95 SMD1858
20 95 SMD2058
25 95 SMD2558
30 95 SMD3058
Drills For Mortising Chisels
210
210
210
210
210
210
210
210
210
210
TL
TL
SD WL Ref.
D
Straight Mortising Bits 4pcs Set
Ø6, 8,10,12/Shank 15.88 mm SMC06120458
Precisely ground bits made of high quality steel for all popular mortisers to make square slots.
Square Mortising Chisels
TL
WL
D
S
S=ø shank
Ref.
TL
WL
145
MORTISING AND DRILL BITS
D
WL
WL SD TL Ref.
T.C.T Forstner Bits
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
38
40
42
44
45
50
52
54
55
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
10x30
10X30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
10x30
TFN90103010
TFN90103011
TFN90103012
TFN90103013
TFN90103014
TFN90103015
TFN90103016
TFN90103017
TFN90103018
TFN90103019
TFN90103020
TFN90103021
TFN90103022
TFN90103023
TFN90103024
TFN90103025
TFN90103026
TFN90103027
TFN90103028
TFN90103029
TFN90103030
TFN90103031
TFN90103032
TFN90103033
TFN90103034
TFN90103035
TFN90103036
TFN90103038
TFN90103040
TFN90103042
TFN90103044
TFN90103045
TFN90103050
TFN90103052
TFN90103054
TFN90103055
TFN90103060
TL
D
S
RightØ8Ø10
146
MORTISING AND DRILL BITS
WL
Micro-grain carbide tips fine sharpened to cut all kind of wood materials.
Two knives, two spurs, one center point design make it a perfect boring tool.
Suitable for both hand drills and drill machines.
15
20
25
30
35
40
45
50
55
75
80
85
90
95
100
100
105
110
125
130
135
140
145
150
150
155
160
13X50
13X50
13X50
13X50
16X50
16X50
16X50
16X50
16X50
TFN125135015
TFN130135020
TFN135135025
TFN140135030
TFN145165035
TFN150165040
TFN150165045
TFN155165050
TFN160165055
60 110 160 16X50 TFN160165060
65 110 160 16X50 TFN160165065
WL SD TL Ref.
15-20-25-30-35/Shank 10x30mm TFN103005
5pcs Forstner Set
Ø10
DroiteRight
Ø13Ø16
Tenon & Plug Cutters
Make tenons and special length plugs from any shape stock(even end grain).
Improving knot-holes, it has an excess of 0.1mm to permit the exact seating on the knots-holes dowels.
Made in high quality alloy steel to be used in drill press, horizontal borers and lathes.
147
MORTISING AND DRILL BITS
Ref.WL SD TL
6
8
10
12
13
14
15
16
18
20
22
25
28
30
32
35
40
45
50
55
60
65
70
75
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
160
160
160
160
160
160
160
160
160
160
13x50
13x50
13x50
13x50
13x50
13x50
13x50
13x50
13x50
13x50
13x50
13x50
13x50
13x50
13x50
16x50
16x50
16x50
16x50
16x50
16x50
16x50
16x50
16x50
16x50
TPC140135006
TPC140135008
TPC140135010
TPC140135012
TPC140135013
TPC140135014
TPC140135015
TPC140135016
TPC140135018
TPC140135020
TPC140135022
TPC140135025
TPC140135028
TPC140135030
TPC140135032
TPC160165035
TPC160165040
TPC160165045
TPC160165050
TPC160165055
TPC160165060
TPC160165065
TPC160165070
TPC160165075
TPC160165080
D
S
TL
WL
5pcs Tenon&plug Cutter Set
15/20/25/30/35mm
8pcs Tenon&plug Cutter + Forsntner Set
TPC153505
Tenon&plug cutter 8-10-12-15mm/Shank 13x50mm
Fostner bits 8-10-12-15mm/Shank 10x30mm
TPF081508
Ø13Ø10
148
MORTISING AND DRILL BITS
Ø13Ø16
Auger Bits
Self feeding drill ideal for deep and go through holes with different length.
For use by carpenters to bore through rafter, ship and fence construction.
High performance bits with hardened cutter and tempered shank to guarantee clear cutting and avoid damage from the chuck.
Suitable for both soft and hard woods.
AUH23506
AUH23508
AUH23510
AUH23512
AUH23513
AUH23514
AUH23515
AUH23516
AUH23517
AUH23518
AUH23520
AUH23522
AUH23524
AUH23526
AUH23528
AUH23530
AUH23532
AUH23534
AUH23536
AUH23538
Ref.WL SD TL
6 160 235 Hex
8 160 235 Hex
10 160 235 Hex
12 160 235 Hex
13 160 235 Hex
14 160 235 Hex
15 160 235 Hex
16 160 235 Hex
17 160 235 Hex
18 160 235 Hex
20 160 235 Hex
22 160 235 Hex
24 160 235 Hex
26 160 235 Hex
28 160 235 Hex
30 160 235 Hex
32 160 235 Hex
34 160 235 Hex
36 160 235 Hex
38 160 235 Hex
Ref.WL SD TL
AUH46010
AUH46012
AUH46013
AUH46014
AUH46015
AUH46016
AUH46017
AUH46018
AUH46020
AUH46022
AUH46024
AUH46026
AUH46028
AUH46030
AUH46032
AUH46034
AUH46036
AUH46038
10 380 460 Hex
12 380 460 Hex
13 380 460 Hex
14 380 460 Hex
15 380 460 Hex
16 380 460 Hex
17 380 460 Hex
18 380 460 Hex
20 380 460 Hex
22 380 460 Hex
24 380 460 Hex
26 380 460 Hex
28 380 460 Hex
30 380 460 Hex
32 380 460 Hex
34 380 460 Hex
36 380 460 Hex
38 380 460 Hex
49
MORTISING AND DRILL BITS
Ref.WL SD TL
AUH60012
AUH60013
AUH60014
AUH60015
AUH60016
AUH60017
AUH60018
AUH60020
AUH60022
AUH60024
AUH60026
AUH60028
AUH60030
AUH60032
AUH60034
AUH60036
AUH60038
12 520 600 Hex
13 520 600 Hex
14 520 600 Hex
15 520 600 Hex
16 520 600 Hex
17 520 600 Hex
18 520 600 Hex
20 520 600 Hex
22 520 600 Hex
24 520 600 Hex
26 520 600 Hex
28 520 600 Hex
30 520 600 Hex
32 520 600 Hex
34 520 600 Hex
36 520 600 Hex
38 520 600 Hex
Ref.WL SD TL
AUP23510
AUP23512
AUP23514
AUP23516
AUP23518
AUP23520
AUP23522
10 160 235 SDS PLUS
12 160 235 SDS PLUS
14 160 235 SDS PLUS
16 160 235 SDS PLUS
18 160 235 SDS PLUS
20 160 235 SDS PLUS
22 160 235 SDS PLUS
Auger Bits Sets
6-8-10-12-14mm/Shank hex 235mm AUH061423505
6-8-10-12-15mm/Shank SDS 235mm AUP061423505
12-14-16-18-20mm/Shank hex 460mm AUH122046005
12-14-16-18-20mm/Shank SDS 460mm AUP122046005
Right
235mm
TL
WL
150
MORTISING AND DRILL BITS
D
Ref.SD TL
Flat Bits
6 152 Hex FBH15206
8 152 Hex FBH15208
10 152 Hex FBH15210
12 152 Hex FBH15212
14 152 Hex FBH15214
16 152 Hex FBH15216
18 152 Hex FBH15218
20 152 Hex FBH15220
22 152 Hex FBH15222
24 152 Hex FBH15224
25 152 Hex FBH15225
26 152 Hex FBH15226
28 152 Hex FBH15228
30 152 Hex FBH15230
32 152 Hex FBH15232
35 152 Hex FBH15235
38 152 Hex FBH15238
Easy and efficient tools to bore holes in hard and soft wood, laminated wood, chipboards, etc.
Two cutters, two spurs and center point with two cutters build it a sharp tool.
Made in high quality carbon steel hardened and tempered.
15 Pcs Flat Bits Set
FBS0638156-8-10-14-16-18-22-28-32-35-38mm x 1
13-15mm x 2
Adjustable Flat Bits
Ref.SD TL
15-40 120 8 FBA120081540
22-76 155 10 FBA155102276
TL
D
S
40
S=ø shankRight
151
MORTISING AND DRILL BITS
TL
D S
Easy and efficient tool to bore holes with different sizes by one tool.
Adjustable cutter with scale.
Made in high quality carbon steel hardened and tempered.
These wood twist drills are featuring high alloyed steel-quality,with center point, 2 cutters and 2 spurs.
Optimized spurs in special version ensure fast and easy cutting of the wood fibres before the hole is drilled.
Additionally, a bevelled edge leads to a perfect drilling of the diameter without any deviation.
The alloyed steel improves the stability time of the drill.
Best qualified for boring into all types of wood, laminated boards MDF and even acrylic glass.
Twist Drills
Ref.WL SD TL
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
22
24
26
28
30
32
30 70 3 THS0700300303
43 75 4 THS0750430404
52 85 5 THS0850520505
57 95 6 THS0950570606
70 110 7 THS1100700707
70 110 8 THS1100700808
70 110 9 THS1100700909
70 110 10 THS1100701010
75 130 10X30 THS130075103011
85 140 10X30 THS140085103012
95 150 10X30 THS150095103013
95 150 10X30 THS150095103014
100 155 10X30 THS155100103015
105 160 10X30 THS160105103016
125 180 10X30 THS180125103018
130 200 13X50 THS200130135020
140 210 13X50 THS210140135022
145 215 13X50 THS215145135024
145 215 13X50 THS215145135026
145 215 13X50 THS215145135028
145 215 13X50 THS215145135030
145 215 13X50 THS215145135032
WL
TL
D S
7-8.5-9mm x 1
15 Pcs Twist Drills Set
THS0310153-4-5-6-8-10mm x 2
152
MORTISING AND DRILL BITS
To be mounted on twist drills for boring and countersinking in one step
Made in H.S.S for very long life.
Countersink 5 Flutes
Ref.D TL
17 28 3 CS5172803
17 28 4 CS5172804
17 28 5 CS5172805
17 28 6 CS5172806
17 28 7 CS5172807
17 28 8 CS5172808
20 28 9 CS5202809
20 28 10 CS5202810
Ø
Countersink Drills
Ref.ShankTLØ D3 17 70 3 CSD0701703
4 17 75 4 CSD0751704
5 17 85 5 CSD0851705
6 17 95 6 CSD1101706
7 17 110 7 CSD1101707
8 17 110 8 CSD1101708
9 20 110 9 CSD1102009
10 20 110 10 CSD1102010
4pcs Countersink Drills Set
CSD0306043-4-5-6mm
WL
TL
D S
153
MORTISING AND DRILL BITS
Ideal tool to make the blind holes and countersinks in one step for screws.
Adjust the position of countersink to get the desired depth of the bore.
MORTISING AND DRILL BITS
Well sharpened carbide teeth, Quick chips release design, H.S.S pilot drill make this tool ideal to cut dry wall and ceiling for fixing spot lights, sockets etc.
Suitable for all types of wooden materials.
Ref.D
T.c.t Wood Hole Saw
HT Teeth19
20
22
25
27
29
30
32
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
1
1
1
1
1
1
1
1
2
2
3
3
3
3
3
3
3
4
4
5
HSC5501019
HSC5501020
HSC5501022
HSC5501025
HSC5501027
HSC5501029
HSC5501030
HSC5501032
HSC5502035
HSC5502040
HSC5503051
HSC550354
HSC5503060
HSC5503064
HSC5503065
HSC5503067
HSC5503074
HSC5504083
HSC5504092
HSC5505103
Arbor Ref.Scope Thread Shank Pilot
19-30mm 1/2" - 20UNF 3/8" 6.35x100 HSA0190320308
32-125mm 1/2" - 20UNF 7/16" 6.35x100 HSA0321250716
5pcs T.c.t Wood Hole Saw Set
Pilot drill
6.35x100mm HSP635100
HSC35650535-40-54-60-65mm + 1 Arbor
154
35
40
51
54
60
63
65
67
74
83
92
103
ROUTER BITS
Bearing
Anti-Kickback
T.C.T.
R
High quality micro-carbide and precise grinding give you fast, accurate results and perfect finishing.
abbeting is one of the most common and useful joints in woodworking.
Cutting Diameter
Cutting Length Shank
1/2"
1/2"
1/2"
8mm
8mm
8mm
Cutting depth
bearing Ref.
Ref.
1/4" 1/2"1" 1/2"
3/8" 1/2"1-1/4" 1/2"
1/2" 3/4”1-1/2" 1/2"
1/4" 1/2”1" 1/2"
3/8" 1/2"1-1/4" 1/2"
1/2" 3/4”1-1/2" 1/2"
1/2"
Cutting Diameter
Cutting Length Shank
9pcs set including one rabbeting bit, one Allen wrench and 7 bearing(two3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8") enable you have six different cuts by changing the ball bearings.
8mm
1/2"
1/2" 1-3/8"
1-3/8"
1/8", 1/4", 5/16", 3/8", 7/16", 1/2"
1/8", 1/4", 5/16", 3/8", 7/16", 1/2"
0008002RAB
0008004RAB
0008006RAB
0012002RAB
0012004RAB
0012006RAB
0008RABSET
0012RABSET
1)rabbeting Bits With Bearings
9pcs Rabbeting Bits Set
155
Cutting Radius
1/8"
1/4"
3/8"
1/2"
5/8"
1/4"
3/8"
1/2"
5/8"
3/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1/2"
5/8"
3/4"
7/8"
1"
3/4"
1"
1-1/4"
1-1/2"
1-3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2"
Cutting Diameter
Cutting Length Shank
Ideal for decorative edges. Change to a smaller bearing to make a beading bit.
Lower depth setting will produce a decorative bead on the top.
Also used for drop leaf table joints, molding, etc.
1/2"
1/2"
1/2"
1/2"
1/2"
8mm
8mm
8mm
8mm
8mm
Bearing
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
5pcs roundover bits with 1/2" bearings covers all what you need, one 3/8" OD bearing to beading, one Allen wrench to change the bearings.
ShankBearing
8mm
1/2"
1pc 3/8" R166ZZ
1pc 3/8" R166ZZ
1/8", 1/4", 3/8", 1/2", 5/8"
1/4", 3/8", 1/2", 5/8",3/4"
Allen wrench Roundover bits
1pc
1pc
Bearing
Anti-Kickback
T.C.T.
0108002RDO
0108004RDO
0108006RDO
0108008RDO
0108010RDO
0112004RDO
0112006RDO
0112008RDO
0112010RDO
0112012RDO
0108RDOSET
0112RDOSET
2)roundover Bits Set
5pcs Roundover Bits Set
ROUTER BITS
156
Ref.
Ref.
1/4" 1/2"1" 1/2"
3/8" 9/16"1-1/4" 1/2"
1/2" 5/8"1-1/2" 1/2"
5/8" 3/4"1-3/4" 1/2"
3/4" 7/8"2" 1/2"
5/8" 3/4"1-3/4" 8mm
1/2" 5/8"1-1/2" 8mm
Cutting Radius
Cutting Diameter
Cutting Length Shank
1/8" 3/8"3/4" 8mm
1/4" 1/2"1" 8mm
3/8" 9/16"1-1/4" 8mm
Use together with our roundover bits of the same radius to make perfect fitting joints that are ideal for drop leaf tables.
Bearing
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
5pcs cove bits which match our 5pcs roundover bits, worth to have both to complete your job.
BearingAnti-Kickback
T.C.T.
Shank 8mm Cove bits 5pcs 1/8", 1/4", 3/8", 1/2", 5/8" Allen wrench 1pc
Cove bits 5pcs 1/4", 3/8", 1/2", 5/8",3/4"Shank 1/2" Allen wrench 1pc
Bearing
Anti-Kickback
T.C.T.
0208002CVE
0208004CVE
0208006CVE
0208008CVE
0208010CVE
0212004CVE
0212006CVE
0212008CVE
0212010CVE
0212012CVE
0208CVESET
0212CVESET
3)cove Bits
5pcs Cove Bits Set
ROUTER BITS
157
Ref.
Cutting Diameter
Cutting Length Shank
Straight bits with end cutting. No need to drill a hole before cutting.
These bits are ideal for routing stopped dadoes, mortising or interior cut out work as well as every job the normal straight bits do, plane edges, cut grooves, rabbets, slots.
T.C.T.
SOLIDCARBIDE
15/64" 3/4" 8mm
1/4" 3/4" 8mm
5/16" 1" 8mm
3/8" 1" 8mm
31/64" 1" 8mm
1/2" 1" 8mm
23/32" 1" 8mm
3/4" 1" 8mm
1" 1" 8mm
6mm 3/4" 8mm
8mm 3/4" 8mm
10mm 1" 8mm
12mm 1" 8mm
14mm 1" 8mm
16mm 1" 8mm
18mm 1" 8mm
20mm 1" 8mm
25mm 1" 8mm
30mm 1" 8mm
15/64" 3/4" 1/2"
1/4" 3/4" 1/2"
3/8" 1" 1/2"
31/64" 1" 1/2"
1/2" 1" 1/2"
23/32" 1" 1/2"
3/4" 1" 1/2"
1" 1" 1/2"
Anti-Kickback
0308003STB
0308004STB
0308005STB
0308006STB
0308007STB
0308008STB
0308011STB
0308012STB
0308014STB
030806MSTB
030808MSTB
030830MSTB
030825MSTB
030820MSTB
030818MSTB
030816MSTB
030814MSTB
030812MSTB
030810MSTB
0312003STB
0312004STB
0312006STB
0312007STB
0312008STB
0312011STB
0312012STB
0312014STB
4)straight Bits Plunge Cutting
ROUTER BITS
158
Ref.
Most popular set for all projects.
Complete collection of metric straight bits which solves all your problems with metric joints.
Our plywood groove bits match the thickness of plywood, producing tight, accurate joints.
Shank 8mm 15/64", 31/64", 23/32"
Shank 1/2" 15/64", 31/64", 23/32"
15/64"
31/64" 23/32"
Shank 8mm
Shank 1/2"
1/4", 3/8", 1/2", 3/4", 1"
1/4", 3/8", 1/2", 3/4", 1"
Shank 8mm 6, 8, 10, 12, 14, 16, 20, 25, 30mm
0308PLYSTB
0312PLYSTB
0308STBSET
0308MMSTBSET
0312STBSET
3pcs Straight Bits Plywood Groove Set
5pcs Straight Bits
10pcs Metric Set
ROUTER BITS
159
Ideal for beveling and decorative edges.
Use our bits to build beautiful planters, boxes and other multi-sided pieces.
Cutting Length
Angle Cutting Diameter
Shank
15 degree 3/4" 1/2" 8mm
25 degree 7/8" 1/2" 8mm
45° 1 3/4" 23/32" 8mm
22.5° 1 1/4" 7/8" 1/2"
30° 1 1/2" 7/8" 1/2"
45° 1 3/4" 23/32" 1/2"
A staple of any woodworker's shop, the graceful shape is always a popular edge treatment for decorative edges on mouldings, signs,plaques, furniture, etc.
Lowing the bit produces a decorative bead.
Bearing
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/4" 1 1/2" 11/16" 8mm
5/32" 1 1/8" 29/64" 1/2"
1/4" 1 1/2" 11/16" 1/2"
Cutting Diameter
Cutting Length Shank
Cutting Radius
5/32" 1 1/8" 29/64" 8mm
Bearing
1/2"
1/2"
1/2"
1/2"
Bearing
Anti-Kickback
T.C.T.
Bearing
Anti-Kickback
T.C.T.
040815DCHM
040825DCHM
040845DCHM
041222DCHM
041230DCHM
041245DCHM
0508003ROB
0508004ROB
0512003ROB
0512004ROB
5) Chamfer Bits
6) Ogee Bits
Roman Ogee Bits
ROUTER BITS
160
Ref.
Ref.
A staple of any woodworker's shop, the graceful shape is always a popular edge treatment for decorative edges on mouldings, signs,plaques, furniture, etc.
Lowing the bit produces a decorative bead.
Perfect bits for making strong joints on drawers, boxes and furniture carcases. Our bits fit most popular jigs.
Two passes are recommended when routing dovetails with a template. For easier routing and less stress on your dovetail bit.
Please run the first pass with our straight bit.
Moreover, for leigh jig the bits must be used with a guide bush needs to be bushing of an O.D of 7/16"
8mm
5/32" 1/2"
1/2"
Cutting Diameter
Cutting Length Shank
Cutting Radius
5/32" 8mm
Bearing
1/2"
1/2"
1/2"
1/2"
1 1/8" 1/2"
1/4"-3/16" 1 3/8" 3/4"
1 1/8" 1/2"
1/4"-3/16" 1 3/8" 3/4"
Bearing
Anti-Kickback
T.C.T.
BearingAnti-Kickback
T.C.T. SOLIDCARBIDE
Shank Length Angle
Cutting Diameter
Cutting Length
Overall length Shank
ShankLength Angle
1/4”
2 1/8"
8mm 8 degree
5/16”
2 1/4"
8mm 8 degree
3/8” 8mm 8 degree
7/16” 2 3/8" 8mm 8 degree
1/2" 2 9/16" 8mm 8 degree
2”13/4”
13/4”
13/4”
13/4”
13/4”
Up to 1/4"
Up to 3/8"
1/4"-1/2"
3/8"-5/8"
1/2"-13/16"
0608003COB
0608004COB
0612003COB
0612004COB
0708004DVT
0708005DVT
0708006DVT
0708007DVT
0708008DVT
Classical Ogee Bits
7) Dovetail Bits
Through Dovetails For Leigh Jig
ROUTER BITS
161
Ref.
Ref.
A staple of any woodworker's shop, the graceful shape is always a popular edge treatment for decorative edges on mouldings, signs,plaques, furniture, etc.
Lowing the bit produces a decorative bead.
Through dovetail Half-blind dovetail Veriably-spaced dovetail Sliding dovetail
Shank Length Angle
Cutting Diameter
Cutting Length
Overall length Shank
ShankLength Angle
5/16" Up to 1 inch 1 3/4" 2 3/4" 8mm Straight 0308005STB
AngleCutting
DiameterCutting Length
Overall length Shank Angle
1/2" 3/8" 2 1/8" 8mm 18 degree
1/2" 7/16" 2 1/4" 8mm 14 degree
1/2" 1/2" 2 5/16" 8mm 12 degree
1/2" 5/8" 2 3/8" 8mm 10 degree
1/2" 3/4" 2 9/16" 8mm 8 degree
0908006DVT
0908007DVT
0908008DVT
0908010DVT
0908012DVT
0708DVTSET
0908HDVTSET
Straight Bit To Cut The Pins
Through Dovetails For Leigh Jig 6 Pcs Set
Half Blind Dovetails For Leigh Jig
Half Blind Dovetails For Leigh Jig 6 Pcs Set
ROUTER BITS
162
Ref.
Ref.
Ref.
Ref.
AngleCutting
DiameterCutting Length
Overall length Shank Angle
1/4" 5/16" 2 1/2"
8mm 7.5 degree5/16" 3/8" 2 1/2"
8mm 9 degree
3/8" 3/8" 2 1/2" 8mm 9 degree
1/2" 1/2" 2 1/2" 8mm 14 degree
5/8" 7/8" 2 5/8" 8mm 7 degree
3/4" 7/8" 2 5/8" 8mm 7 degree
1/4" 3/4" 2 3/8" 8mm straight
3/8" 1" 2 5/8" 8mm straight
1008003DVT
1008004DVT
1008006DVT
1008008DVT
1008010DVT
1008012DVT
1008004STB
1008006STB
1008IJDVTSET
Max joint thickness
1 3/16"
Cutting Diameter
Shank
1/2"1 3/4"
Produces a strong glue edge joint for door panels, tabletops, desktops and cabinets.
Center the cutter on the stock and cut both tongue and groove in one pass.
Flip wood, cut matching side, then assemble. Use with stock up to 1-1/4" thick.
Anti-Kickback
T.C.T.
1112002RGJ
Incra And Jointech Of Dovetail Bits 8 Pcs Set
8) Reversible Glue Joint Bit
ROUTER BITS
163
Ref.
Ref.
Ref.
Cutting Diameter
Cutting Length Shank
1/2"2"
Making strong drawer is easy with our drawer lock bit. Rout the drawer frond and sides with the bit mounted in a table. Attach sides to front of drawer with perfectly mated, strong glue joints.
1/2"
Anti-Kickback
T.C.T.
1212002DLB
Cutting Diameter
Cutting Length Shank
3/8" 1" 3/8" 8mm
1/2" 1" 1/2" 8mm
3/4" 1" 3/4" 8mm
Bearing
For use in trimming laminates and pattern routing.
V-notch bits makes a "V" where two pieces join together, hiding a less than perfect joint.
Bearing
Anti-Kickback
T.C.T.
1308006FTB
1308008FTB
1308012FTB
9) Drawer Lock Bit
10)flush Trim Bits
ROUTER BITS
164
Ref.
Ref.
Cutt ing Diameter
Cutting Length
Cutting Radius
For half round shapes and edge forming. Can be used to form a completely rounded edge, or to leave a bead on top or bottom.
Also, with two passes, can make dowels.
Our bits are in metric for forming loose tenon biscuits.
BearingAnti-Kickback
T.C.T.
Shank
1/2"
1/2"
1/2"
7/8" 5/8"
3mm 7/8" 5/8"
4mm 1" 3/4"
2.5mm
1/2"5mm 1" 3/4"
141202MBNB
141203MBNB
141204MBNB
141205MBNB
1412BNBSET
11) Bull Nose In Mm With 1/2" Bearings And 1/2' Shank
Bull Nose Set In Mm With 1/2" Bearings And 1/2' Shank 4 Pcs Set
165
Ref.
Ref.
JIG SAWS
Innovative tool for curve cutting, convenient, fast and clean.
H.C.S blade for wood, plastic, plywood and so on.
Bi-metal blade for ferrous and non-ferrous metal materials.
Jig Saws
BO CH TYPES
L TPI Bosch No. Art no.
55mm 12 T119B JCV315512
Hard and soft wood, plywood, plastic up to 30mm.
clean cutting.
55 24 T118A JBM315524
Mild steel, stainless steel up to 2mm.
Non-ferrous metals up to 4mm.
55 12 T118B JBM315512
Mild steel, hard plastic up to 3mm.
Non-ferrous metals up to 10mm.
75 6 T101D JCV317506GT
GROUND AND TAPERED
Hard and soft wood, plywood, chipboard up to 60mm.
Fast clean cutting.
75 6 T244D JCV317506
Hard and soft wood up to 60mm. Coarse cutting. For
curved cutting of soft plastics up to 50mm.
75 6 T144D JCV317506G
Hard and soft woods up to 60mm.
Fast coarse cutting.
75 8 T111C JCV317508
Hard and soft woods up to 60mm. Coarse cutting.
Soft plasitcs up to 30mm.
75 10 T101B JCV317510GT
GROUD AND TAPERED
Hard and soft woods, plywood, chipboard up to 50mm.
Soft plastics up to 20mm, fast clean cutting.
166
CV
Bi-Metal
PVC
PVC
PVC
PVC
Bi-Metal
CV
CV
CV
CV
CV
L TPI Bosh No. Art no.
BLACK&DECKER TYPE
55 12 A5033 JCV345512
Hard and soft wood, plywood, plastic up to 30mm.
clean cutting.
55 12 A5034 JBM345512
Mild steel, hard plastic up to 3mm.
Non-ferrous metals up to 10mm.
55 24 A2224/A5039
JBM345524
Mild steel, stainless steel up to 2mm.
Non-ferrous metals up to 4mm.
75 6 A2207 JCV347506G
Hard and soft wood up to 60mm.
Fast coarse cutting.
75 8 A2206 JCV347508
Hard and soft wood up to 60mm. Coarse cutting.
Soft plastic up to 30mm.
75 10 A5035/A2201
JCV347510GT
GROUD AND TAPERED
Hard and soft wood, plywood, chipboard up to 50mm.
Soft plastics up to 20mm, fast clean cutting.
110 24 T318A JBM3111024
Mild steel, stainless steel, non-ferrous metals.
up to 10mm. Clean and fine cut.
8 T127D JBM31750875
Mild steel 3-6mm, Non-ferrous metals 3-15mm
Plastic and fibre glass.
L TPI Art no. B&D no.
JIG SAWS
167
CV
Bi-Metal
Bi-Metal
Bi-Metal
CV
CV
Bi-Metal
CV
L TPI Art no. MAKITA no.
55 8 8704 JBM335508
Mild steel 3-6mm, Non-ferrous metals 3-15mm
Plastic and fibre glass.
55 12 8705 JBM335512
Mild steel, hard plastic up to 3mm.
Non-ferrous metals up to 10mm.
55 24 8701 JBM335524
Mild steel, stainless steel up to 2mm.
Non-ferrous metals up to 4mm.
75 6 JCV337506G
Hard and soft woods up to 60mm.
75 8 8703 JCV337508
Hard and soft woods up to 60mm. Coarse cutting.
75 10 JCV337510GT
GROUND AND TAPERED
Hard and soft woods, plywood, chipboard up to 50mm.
Soft plastics up to 20mm, fast clean cutting.
JIG SAWS
168
MAKITA TYPE
CV
CV
CV
Bi-Metal
Bi-Metal
Bi-Metal
5PCS JIG SAW SET-Bosch Shank JIG3105
JBM315524 x 1pc
JCV315512 x 1pc
JCV317506G x2pc
JCV317510GT x 1pc
5PCS JIG SAW SET-Black& Decker Shank JIG3405
JBM345524 x 1pc
JCV345512 x 1pc
JCV347506G x2pc
JCV347510GT x 1pc
5PCS JIG SAW SET-Makita Shank JIG3305
JBM335524 x 1pc
JBM335512 x 1pc
JCV337506G x2pc
JCV337510GT x 1pc
10PCS JIG SAW SET-Bosch Shank JIG3110
JBM315524 x 2pc
JCV315512 x 2pc
JCV317506G x3pc
JCV317510GT x 3pc
10PCS JIG SAW SET-Black& Decker Shank JIG3410
JBM345524 x2pc
JCV345512 x2pc
JCV347506G x3pc
JCV347510GT x3pc
10PCS JIG SAW SET-Makita Shank JIG3310
JBM335524 x2pc
JCV335512 x 2pc
JCV337506G x3pc
JCV337510GT x3pc
The most efficient portable tools to cut almost everyting with the right choice of the blades.
1/2" standard handle suitable for all machines.
Reciprocating Saw Blade Series
L TPI Art no. Bosch No.
130mm 3 S617K 8905 RCV13003
For timber and wood, rough and fast cutting.
280 3 S617K RCV28003
For timber and wood, rough and fast cutting.
210 4 S1531L RCV21004
For humid tmber, bushes, tree branches, rough
and fast cutting.
280 6 S1344D RCV28006
For wood, plywood, chipboard, and plastics..
Fast coarsing cutting.
RECIPROCATING SAW
BLADE SERIES
169
CV
CV
CV
CV
L TPI Art no. Bosch No.
130 10 S922HF RBM13010
For all kind of wood cutting and also for non-ferrous metals, and metal tubes.
180 10 S1122HF RBM18010
280 10 S1211H RRM28010
130 14 S922BF RBM13014
For non-ferrous metals cutting and iron pipe thickess 3mm to 8mm.also for stainless steel.
180 14 S1122BF RBM18014
130 18 S922EF RBM13018
For all kind of wood cutting and also for non-ferrous metals, and metal tubes.
For all kind of wood cutting and also for non-ferrous metals, and metal tubes.
For non-ferrous metals cutting and iron pipe thickess 3mm to 8mm.also for stainless steel.
RECIPROCATING SAW
BLADE SERIES
170
Bi-Metal
Bi-Metal
Bi-Metal
Bi-Metal
Bi-Metal
Bi-Metal
For non-ferrous metals cutting and iron pipe thickess 3mm to 8mm.also for stainless steel.
Reinforced cast iron jaws, strong serrated supporting rail, hardened anti-slippery stopper, pump clamping system, make it a very powerful heavy duty clamp ideal for woodworking.
Heavy Duty Wood Clamp
171
L W Rail Ref.200
300
400
500
600
300
400
500
600
800
1000
1200
1500
400
500
600
800
1000
1200
1500
2000
2500
3000
90 28x8 FPC090288020
90 28x8 FPC090288030
90 28x8 FPC090288040
90 28x8 FPC090288050
90 28x8 FPC090288060
120 35x8 FPC120358030
120 35x8 FPC120358040
120 35x8 FPC120358050
120 35x8 FPC120358060
120 35x8 FPC120358080
120 35x8 FPC120358100
120 35x8 FPC120358120
120 35x8 FPC120358150
150 40x10 FPC150410040
150 40x10 FPC150410050
150 40x10 FPC150410060
150 40x10 FPC150410080
150 40x10 FPC150410100
150 40x10 FPC150410120
150 40x10 FPC150410150
150 40x10 FPC150410200
150 40x10 FPC150410250
150 40x10 FPC150410300
L
W
Rail
HEAVY DUTY WOOD CLAMP
Heavy duty roller stand with strong steel structure, equipped with three disassembled legs-the most reliable standing system.
Precisely machined roller with bearings guarantee a smooth rolling.
Six balls allow the rolling to all directions.
Delivered disassembled in compact carton to save space.
H-Min H-Max W Ref.
Roller Stand Combination
620 1200 405 RSR40562110
172
Heavy duty roller stand with strong steel structure, equipped with three disassembled legs-the most reliable standing system.
Precisely machined roller with bearings guarantee a smooth rolling.
Delivered disassembled in compact carton to save space.
Roller Stand
620 1000 405 RSR40562100
H-Min H-Max W Ref.
ROLLER STAND
173
400 1000 405 RSM40540100
Heavy duty roller stand with strong steel structure, equipped with three disassembled legs-the most reliable standing system.
Precisely machined roller with bearings guarantee a smooth rolling.
Six balls allow the rolling to all directions.
Patented new design of two stroke system maximize the work range ideal for planers.
Delivered disassembled in compact carton to save space.
H-Min H-Max W Ref.
Roller Stand Mini-max
1m
40cm
ROLLER STAND