Upload
duongxuyen
View
263
Download
3
Embed Size (px)
Citation preview
RadiusCircular Formwork
350
250
125
240
120
300
250
125
240
120
150
250
125
240
120
21
2
Compatible mit Mammut 350The new MEVA circular formwork Radius is a complete system for all round walls from a radius of 250 cm and compatible with the wall formwork Mammut 350. The panels are joined in the same, well-known manner with just a few hammer blows using the clamp (M-assembly lock) 1 . n Easy follow on to straight walls.n Same method of working, simple logistics.n Fast, efficient assembly.
Concrete load capacity 60 kN/m²The formwork‘s load capacity of 60 kN/m² enables Radius to be used for high walls, fast pours and fast pour cycles.
Only 0.53 ties per m²The use of Dywidag 20 ties and walers to take up concrete pressure allows for a very economic ratio of only 0.53 ties/m².
Radius sizes
Heights (cm)
Wid
ths
(cm
)
Radius: The Fast Circular Solution
Radius
3
3
Coated steel facingSteel sheet as forming face has established it-self in circular formwork systems all over the world as a reliable, robust solution. It delivers a superior concrete finish and avoids unnecessary subsequent costs, e.g. for replacing worn-out plywood facing 2 .
Circular Formwork
Efficient transportThe Radius panels are delivered to the site flat, making transport by truck simple and space-saving 3 .
1
4
Project profileRound and rounded building parts in n Civil engineeringn Infrastructuren Industrial constructionn Architectural construction
Circular Formwork for Civil Engineering
Building typesFlexible, labour optimised and cost-saving solution for large, high pours and high pour speeds forn Tanksn Silosn Enclosing wallsn Power plantsn Water worksn Entrance rampe
Radius: predestined for architectural jobsThe high-quality, coated steel facing delivers a smooth concrete finish with a symmetrical tie-hole and joint imprint on the concrete 1 .
Radius
2
3
4
5
Circular Formwork
Precise setting with spindlesThe desired radius is set by operating integrated spindles with a normal ratchet spanner. The set-ting is done on the ground and accurate to the millimetre 2 .
Pressure gaugeCritical pours that go to the limit of the form-work’s concrete load capacity are best accom-panied by pressure gauges that monitor fresh concrete pressure on the tie. A big plus in terms of pour safety 3 .
Simple tieing The shoe through which the tie rod is set is simple to click into place. No special tools are needed 4 !
2
3
4 5
1
6
Easy reinforcement and stop endsare set up in the same way as with MEVA wall formwork. Push-pull props and walkway brackets are attached to the welded-in DW nuts with a flange screw 1 . The offset typical with circular formwork is handled with the Radius tie-off clamp RS 2 using a DW tie rod and alignment rails.
Systematic Labour Saving
Simple attachment of boxouts with magnetsThe use of high-performance magnets 3 to attach boxouts on steel facing has a long tradi-tion on construction sites all over the world. It has proved to be reliable and quick. The magnets used in the Radius circular formwork system hold firm 4 even with high concrete pressure and very fast pours. The same is true of strips 5 .
Radius
6
7 8
7
FillersSimple, accurate compensation up to 16 cm with filler timber and Uni clamps 6 .
Built-in crane hook for fast, safe lifting of the formwork using a standard crane hook 7 .
Simple height adjustmentvia spindle to even out unneven ground 8 .
Circular Formwork
2810
GB
3/16
, Prin
ted
in G
erm
any
International Sales & ServiceFormwork CentersHeadquarters (Germany)
MEVA Schalungs-Systeme GmbH
Industriestrasse 5
D-72221 Haiterbach
Tel. +49 7456 692-01
Fax +49 7456 692-66
www.meva-international.com
A-Pfaffstätten, Tel. +43 2252 20900-0
D-Berlin, Tel. +49 3375 90300
D-Haiterbach, Tel. +49 7456 692-01
D-Hannover, Tel. +49 511 949930
H-Budapest, Tel. +36 1 2722222
UAEDubai, Tel. +971 4 3411180
USA-Springfield, Tel. +1 937 3280022
A-Pfaffstätten, Tel. 02252 20900-0
AUS-Adelaide, Tel. 08 82634377
Benelux, Gouda, Tel +31 182 570770
CDN-Toronto, Tel. 416 8278714
CHSeon, Tel. 062 7697100
CO-Bogotá, Tel. 01 5204236
FSarreguemines, Tel. 0387 959938
GBTamworth, Tel. 01827 60217
HBudapest, Tel. 01 2722222
IND-Mumbai, Tel. 022 27563430
MAL-Perak, Tel. 12 5209337
N-Oslo, Tel. 067 154200
PA-Panama City 507 2372222
SGP-Singapore, Tel. 67354459
UAEDubai, Tel. 04 3411180
USASpringfield, Tel. 937 3280022
Family owned and managed in the second generation, MEVA is based in Haiterbach in Germany‘s Black Forest region. The form-work manufacturer is represented through 40 locations on 5 continents.
MEVA has been a pioneer and innovator in formwork since 1970. Many MEVA inventions have become standard in the industry: modular panelised formwork systems, the multifunction profile, the formwork clamp and the closed
hollow profile. MEVA offers a comprehensive product range for every building project and any contractor from small to large, from foundation to high rise and from hand-set formwork all the way to fully automatic climbing systems.