Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Circo, CaroFalt, SpaceColumn Formwork
300
25
30
35
40
45
50
55
60
65
70
75
80
100
25
30
35
40
45
50
55
60
65
70
75
80
50
25
30
35
40
45
50
55
60
65
70
75
80
2
Circular column formwork CircoCircular columns are a prominent architectural feature in structural and civil engineering projects. Since concrete cosmetics are rarely admitted, the demands on the concrete finish (architectural concrete) of circular columns are high.
System benefitsn 300 cm basic units and 100 and 50 cm
extensions cater for all column height in 50 cm steps.n Coated steel facing for a perfect concrete
finish. n Only one part needed to close the forms:
the MEVA clamp.n Accurate ganging thanks to turned connect-
ing flange.n Used with MEVA wall formwork Mammut
350, Circo is perfect for rounded wall ends.n Diameters in 5 cm steps from 25 to 80 cm.n Easy attachment of push-pull props.
Integrated safetyn Working platform with safety hatch.n Integrated safety ladder access.
Circo unit sizes
Heights (cm)
Circo: Round Perfection
Dia
met
ers
(cm
)
Circo
3
Circular Column Formwork
Simple, fast assembly Circo comes to the site in two half shells which are closed using the MEVA clamp. n Easy to join to straight walls.n Same connecting method, identical parts.n Simplified logistics, no special tools.
360
60
120
270
60
120
1
2 3
4
Safety for high column poursCaroFalt is a foldable and movable column form-work with access platform, integrated ladders and safety cages that comply with international safety standards.
Efficient designCaroFalt consists of four identical hinged panels like wind mill vanes. This makes assembly very simple.
CaroFalt can be used with or without Chamfer strips to form either sharp or exactly beveled edges. This way, the access platform and ladder do not have to be assembled and dismantled again and again. Once attached, all accessories remain at their position.
System benefitsn Height extensions added from below saves
dismantling and re-fitting safety gear.n Fixed working platform with safety access. n Close and open panels with a spanner. n All-plastic facing alkus for superior concrete
finish for all pours. n Easy closing and joining units with the
MEVA clamp.
Roll on wheels to the next pourThe complete unit can be wheeled to the next pour by adding on wheels. The complete unit is moved to the next level in a single crane lift.
CaroFalt: Fold it. Wheel it. Done.
Heights
Basic units
Extensions from below
CaroFalt
6
4 5
5
Column Formwork
Fresh concrete pressure 100 kN/m²for fast, high concrete pours and column cross-sections from 20 to 60 cm.
Easy height adaptationWorking platform and safety access remain in place on the basic unit 1 . Basic units 270 and 360 cm high 2 . Height adaptation through extensions added from below 3 . No dismantling and re-fitting. Extensions in 60 cm and 120 cm heights allow for column heights in 30 cm steps. Join basic unit and extensions easily and quickly with the MEVA clamp.
Setting the cross sectionThe tape allows setting the column square or rectangular cross section in 5 cm steps 4 .
Easy-to-use spannerfor time-saving and simple opening and closing of the column formwork 5 even from the lad-der access.
Superior concrete finishthanks to the all-plastic facing alkus suited for architectural specifications 6 .
EdgesSharp or bevelled edges are achievable using chamfer strips.
6
Very high vertical building parts like piers or columns call for a safe and cost-effective alternative to conventional shoring systems. MEVA‘s shoring tower Space does the job. The tower units have a square footprint of 480 cm, which makes the shoring tower very stable at any height. The units are pre-assembled and bolted together at ground level. The tower is built from 300 cm high units which can be extended by 50 cm and 100 cm extension units. Space provides the necessary formwork brac-ing with just a few standard parts and, at the same time, serves as a working platform for rebar or concrete pours at heights above 35 m.
Space: Efficient and Safe at Great Heights
System benefitsn Planking with access hatches.n Large working and storage space.n Align and prop the formwork inside the
shoring tower, additional propping not required.
n The shoring tower is safe for high wind loads.
n Suited for columns or piers beyond 35 m.n Height extensions are simple and easy.
Space
7
Shoring Tower
Simple assemblyon the ground in safe conditions. The shoring tower can be moved as a complete unit or in sections to the next pour, allowing for efficient pour cycles and reduced inventory.
Proppinginside the shoring tower.
Integrated safetyAll-round worker protection on each working platform, integrated safety ladder and access hatch.
2810
GB
3/16
, Prin
ted
in G
erm
any
International Sales & ServiceFormwork CentersHeadquarters (Germany)
MEVA Schalungs-Systeme GmbH
Industriestrasse 5
D-72221 Haiterbach
Tel. +49 7456 692-01
Fax +49 7456 692-66
www.meva-international.com
A-Pfaffstätten, Tel. +43 2252 20900-0
D-Berlin, Tel. +49 3375 90300
D-Haiterbach, Tel. +49 7456 692-01
D-Hannover, Tel. +49 511 949930
H-Budapest, Tel. +36 1 2722222
UAEDubai, Tel. +971 4 3411180
USA-Springfield, Tel. +1 937 3280022
A-Pfaffstätten, Tel. 02252 20900-0
AUS-Adelaide, Tel. 08 82634377
Benelux, Gouda, Tel +31 182 570770
CDN-Toronto, Tel. 416 8278714
CHSeon, Tel. 062 7697100
CO-Bogotá, Tel. 01 5204236
FSarreguemines, Tel. 0387 959938
GBTamworth, Tel. 01827 60217
HBudapest, Tel. 01 2722222
IND-Mumbai, Tel. 022 27563430
MAL-Perak, Tel. 12 5209337
N-Oslo, Tel. 067 154200
PA-Panama City 507 2372222
SGP-Singapore, Tel. 67354459
UAEDubai, Tel. 04 3411180
USASpringfield, Tel. 937 3280022
Family owned and managed in the second generation, MEVA is based in Haiterbach in Germany‘s Black Forest region. The form-work manufacturer is represented through 40 locations on 5 continents.
MEVA has been a pioneer and innovator in formwork since 1970. Many MEVA inventions have become standard in the industry: modular panelised formwork systems, the multifunction profile, the formwork clamp and the closed
hollow profile. MEVA offers a comprehensive product range for every building project and any contractor from small to large, from foundation to high rise and from hand-set formwork all the way to fully automatic climbing systems.