Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
1 2
+
- +- -
+
A
max 56.5
75.5
3-8
1.5
3.5FA
1.5
A
max 56.575
.5
3-8
1.5
3.5FA
1.5
A
max 56.5
77
3-8 1.5
3.5
KT= min 0max 22.5
3
CLIP top BLUMOTION CRISTALLO
FA
A
FA
A
FA
A
KT
K
MD –3.5 –3 –2.5 –2 –1.5 –1 2.5 4 5.5 7 8.5 10 11.5 13 14.5 16 17.5 19
0 0 0.5 1 1.5 2 2.5 6 7.5 9 10.5 12 13.5 15 16.5 18 19.5 21 22.53 3 3.5 4 4.5 5 5.5 9 10.5 12 13.5 15 16.5 18 19.5 21 22.56 6 6.5 7 7.5 8 8.5 12 13.5 15 16.5 18 19.5 21 22.59 9 9.5 10 10.5 11 11.5 15 16.5 18 19.5 21 22.5
MD
MD
TD-089/3 EN/06.18 © Copyright by Blum
Planning
Assembly Removal
Adjustment
max. ±3.0 mm ±2.0 mm +3.0 mm
See mounting plates
Overlay application
K = FA + 3.5 mm + MD
Cabinet front edge to centre of mounting plate drilling
Front overlay
Distance K
Note
Please contact your glass or front supplier concerning the selection and use of the adhesive in attaching the mounting/adhesive plate to glass and mirrors.
Front protrusion at 90° opening angle
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)
Front overlay
–2.0 mm
Dual application Inset application
20 mm with mounting plate A20
37 mm with mounting plate A37
Cabinet front edge to centre of mounting plate drilling
Front overlay
20 mm with mounting plate A20
37 mm with mounting plate A37
Cabinet front edge to centre of mounting plate drilling
21.5 mm + front thickn. FD with mounting plate A20
38.5 mm + front thickn. FD with mounting plate A37
Front Overlay in mm (FA) in relation to Distance K
Due to the risk of breakage to glass and mirror doors, sufficient gaps are required on all four edges (recommendation: min. 2 mm).
Adhesion plate distanceDistance K
Front Overlay in mm (FA)
Mounting plate spacing (mm)
Mounting plate spacing (mm)
4
CLIP top BLUMOTION CRISTALLO
71B4500C
71T4500C
70T4500CTL
NI | ONS
NI
●
●
○
CLIP top BLUMOTION
CLIP top
CLIP top NI
●
○
NI
ONS
70T4568C
70T4568C
175M4C20N
70T4503
70T4503.09
70.4503
70.4503.BP
NI | ONS
NI
85°
92°
Blum
–
TD-089/3 EN/06.18 © Copyright by Blum
Order specification Glass display cabinets
▬ Hinge for glass display cabinets ▬ Mounting/adhesion plate is glued on (no glass drilling necessary) ▬ CLIP top BLUMOTION with integrat-ed BLUMOTION (and deactivation option) ▬ CLIP top with or without closing mechanism (spring) ▬ 110° opening angle ▬ 3-dimensional front adjustment ▬ Tool-free front to cabinet assembly and removal
Boss
Hinge
With spring
Part no.Spring Colour
Unsprung
Nickel plated
Onyx black
Front material
CRISTALLO adhesion plate
Part no.Colour
Glue-on
Glass/mirror
Mirror
Front material
CRISTALLO mounting plate
Part no.Colour
Glue-on
Glass/mirror Matt-nickel plated
Matt-nickel plated
Special nickel plated
CRISTALLO 110°
Accessories
Opening angle
Opening angle stop
Part no.
Inset application
Part no.Logo Colour
Hinge arm cover cap
Print/Stamp
Plain
Colour
R7037 dust grey
Dark grey
Stamped
Disclaimer of liability
If the Blum fittings are installed according to instructions and on suitable glass and mirror fronts, they will meet the requirements concerning the stability of the connection.
This is monitored through internal and external testing.
As the adhesive and/or the adhesive process are beyond our control, Blum cannot accept liability for claims arising from the failure or malfunction of this/these process/es.
It is recommended that the adhesive be applied by an experienced glass manufacturer.
1 2
+
- +- -
+
max 58.5
77FD
=3-
8
5.5
F =min 2.5
KMKT
6452
5
CLIP top BLUMOTION CRISTALLO
FD
KM
F
KT
FD
F
KM
KT
TD-089/3 EN/06.18 © Copyright by Blum
Planning Glass display cabinets
Assembly Removal
Adjustment
Max. ±2.0 mm ±2.0 mm +3.0 mm
Inset application
Front thickness
KM = FD + 4.5 mm
Front thickness
Gap
Adhesion plate distance
Note
Please contact your glass or front supplier concerning the selection and use of the adhesive in attaching the mounting/adhesive plate to glass and mirrors.
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)
Mounting plate distance
Gap
KT = 5.5 mm – F
Adhesion plate distance
–2.0 mm
Mounting plate distance
Adhesion plate distance
Mounting plate distance
6
CLIP top BLUMOTION CRISTALLO
71B9790NI●CLIP top BLUMOTION
●
○
NI
175M4C20N
70T3504
70T1504
70.1663
70.1663.BP
NI | ONS
NI
609.1500
609.1700
15
17
3.5
3.5
71B9750NI●CLIP top BLUMOTION
70T9750.TLNI○CLIP top
Blum
–
TD-089/3 EN/06.18 © Copyright by Blum
Order specification Bathroom mirror cabinets with fronts that protrude all the way around
▬ Mounting plate is glued on to the front ▬ Boss hole on the cabinet ▬ CLIP top BLUMOTION with integrated BLUMOTION (and deactivation option) ▬ CLIP top without closing mechanism (spring) ▬ Opening angle 95° ▬ 3-dimensional front adjustment ▬ Tool-free front to cabinet assembly and removal ▬ With INSERTA tool-free hinge to door assembly
Boss
Hinge
With spring
Part no.Spring Colour
Unsprung
Nickel plated
Front material
CRISTALLO mounting plate
Part no.Colour
Glue-on
Glass/mirror Matt-nickel plated
INSERTA
Accessories
Hinge
Hinge boss cover cap
Part no.
CLIP top BLUMOTION
CLIP top
Part no.Logo Colour
Hinge arm cover cap
Print/Stamp
Plain
Hinge with double cranked hinge arm
Part no.Length (mm)
Chipboard screw
Ø (mm)
Boss
Hinge Part no.Spring Colour
Screw-on
Stamped
Disclaimer of liability
If the Blum fittings are installed according to instructions and on suitable glass and mirror fronts, they will meet the requirements concerning the stability of the connection.
This is monitored through internal and external testing.
As the adhesive and/or the adhesive process are beyond our control, Blum cannot accept liability for claims arising from the failure or malfunction of this/these process/es.
It is recommended that the adhesive be applied by an experienced glass manufacturer.
Note
Only recommended for wall cabinets due to lower load bearing limits!
Accessories
1968.5
3-8
46.5
(52)
KMFA4.5
7 FA+5
2
-++
-+
-
7
CLIP top BLUMOTION CRISTALLO
FA
KM
FA
KM
TD-089/3 EN/06.18 © Copyright by Blum
Planning Bathroom mirror cabinets with fronts that protrude all the way around
Assembly Removal
Adjustment
Max. ±2.0 mm +2.0 mm ±2.0 mm
-3.0 mm
Hinge with double cranked arm
Front overlay
KM = FA + 4.5 mm
Front overlay
Mounting plate distance
Distance K
Note
Please contact your glass or front supplier concerning the selection and use of the adhesive in attaching the mounting/adhesive plate to glass and mirrors.
Hinge dimensions and gap calculation based on factory setting (mounting plate 175M4C20N)
FA = max. 70 mm
Mounting plate distance
max 61.5 19
8647
.76 2
7.6 2.5
4.9
max 61.5 19
78.5
37.1
1.5
1322.5
6
2
1.6
80.5
44.7
max 58
8.9
19
6
8
CLIP top BLUMOTION CRISTALLO
0
–5° 171A5500
173H7100 0
–5° 171A5500
173H7100 0
+5° 171A5010
173H7100
№ 106
–5°
№ 107
–5°
№ 103
5°
70T4568C
70T4568C
71T4500CNI●CLIP top
70T4500CTLNI○CLIP top
●
○
NI
70.4503
70.4503.BP
NI | ONS
NI
8 9 9 9
8 8 9 9
№ 107 № 100 № 101 № 102
№ 106 № 103 № 104 № 105
WA WA-5° 5° 15°10°
71B4500CNI●CLIP top BLUMOTION
Blum
–
1 x 1 x 1 x
TD-089/3 EN/06.18 © Copyright by Blum
Order specification Angled application
Mounting plate
Angled spacer
Description Part no.Spacing (mm)
Mounting plate
Angled spacer
Description Part no.Spacing (mm)
Mounting plate
Angled spacer
Description Part no.Spacing (mm)
▬ Hinge for glass and mirror doors ▬ Adhesion plate is glued on to the front (no glass drilling necessary) ▬ Tool-free hinge to adhesion plate assembly ▬ CLIP top BLUMOTION with integrat-ed BLUMOTION (and deactivation option) ▬ CLIP top with or without closing mechanism (spring) ▬ 110° opening angle ▬ 3-dimensional front adjustment ▬ Tool-free front to cabinet assembly and removal
Front material
CRISTALLO adhesion plate
Part no.Colour
Glue-on
Glass/mirror
Mirror
Matt-nickel plated
Special nickel plated
Boss
Hinge Part no.Spring Colour
CRISTALLO 110°
With spring
Unsprung
Nickel plated
Accessories
Part no.Logo Colour
Hinge arm cover cap
Print/Stamp
Plain
Stamped
These dimensions are based on a factory setting of 19mm side panels. The overlay application changes in cases of variance. A trial application is recommended. The fixing position of the mounting plate can be different from the standard fixing position.
Page instructions
Angle Angle
WA angled application
Disclaimer of liability
If the Blum fittings are installed according to instructions and on suitable glass and mirror fronts, they will meet the requirements concerning the stability of the connection.
This is monitored through internal and external testing.
As the adhesive and/or the adhesive process are beyond our control, Blum cannot accept liability for claims arising from the failure or malfunction of this/these process/es.
It is recommended that the adhesive be applied by an experienced glass manufacturer.
Note
1 2
37.5
3
73
max. 58 19
6
22.518.5
1.5 4510.5
77
max. 59.5 19
6 2
2
37
3
69.5
max. 59.5 19
6
22.517.5
1.5
45
12
73
max. 60.5 19
6
2
2
37
3
65
max. 60.5 19
6
22.517
1.5
9
CLIP top BLUMOTION CRISTALLO
0
+5° 171A5010
173H7100
№ 100
5°
№ 104
10°
№ 101
10°
№ 105
15°
№ 102
15°
2 x
0
+5° 171A5010
173H7100
2 x
0
+5° 171A5010
173H7100
1 x
0
+5° 171A5010
173H7100
3 x
0
+5° 171A5010
173H7100
3 x
TD-089/3 EN/06.18 © Copyright by Blum
Planning Angled application
Assembly Removal
Adjustment
max. ±3.0 mm ±2.0 mm +3.0 mm
–2.0 mmSee mounting plates
Mounting plate
Angled spacer
Description Part no.Spacing (mm)
Please contact your glass or front supplier concerning the selection and use of the adhesive in attaching the mounting/adhesive plate to glass and mirrors.
Note
Mounting plate
Angled spacer
Description Part no.Spacing (mm)
Mounting plate
Angled spacer
Description Part no.Spacing (mm)
Mounting plate
Angled spacer
Description Part no.Spacing (mm)
Mounting plate
Angled spacer
Description Part no.Spacing (mm)