Upload
leti-hanaj
View
43
Download
3
Embed Size (px)
Citation preview
Chrysler J2534 Application Release Notes: J4.03
Overview Release Date: July 29, 2010 Chrysler J2534 Application Version: J4.03.6
Chrysler Verified J2534 Devices:
J2534 Device Firmware Version
CTC Vehicle box 1.9
Actia I+ME Pass Thru 2.07
Blue Streak -2534 Global Programmer 2.10
Note: Chrysler recommends the CTC Vehicle Box Device for Chrysler SCI ECU reprogramming. SCI reprogramming is used on most PCMs and TCMs prior to the introduction of CAN bus vehicles which began in 2004 (Durango). Please see “Chrysler J2534 Application Requirements” for more information.
New This Release - IMPORTANT: To use the Chrysler J2534 Application, you must install the J4.03.5 application
or your prior application version (J4.02) will no longer function after August 8, 2010. - Added new vehicle support for 2010 MY. - Users are now able to download ECU reprogramming files using the Chrysler J2534
Application for 2010+ MY vehicles. - Addressed known issues reported from field.
Vehicle Support
MY Support ECU Support Description
2009 MY & Prior PCM and TCM only Only ECU reprogramming support is available
2010 MY & Forward J2534 & EURO 5/6 Applicable ECUs
- ECU reprogramming support for 2010MY+ - Diagnostic routine support required after ECU reprogramming or replacement of the ECU
Additional Information 2009 MY and Prior MY support:
- Users must download the ECU reprogramming file(s) from TechAuthority online.
2010 MY and forward Vehicle support: - User will use the Chrysler J2534 Application to download ECU reprogramming files. This
requires a TechAuthority Login.