Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
• Thank you for purchasing COMMAX products.• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.• The company is not responsible for any safety accidents caused by abnormal operation of the product.
• Thank you for purchasing COMMAX products.• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.• The company is not responsible for any safety accidents caused by abnormal operation of the product.
CMV-70MX (Home IoT)User Manual
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, KoreaInt’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133Web site : www.commax.com
Printed In Korea / 2014.02.104PM0271AS0010
Table of Contents
PB
User’s Guide
B-type equipment This unit getting the EMC registration as a home unit can be used in not only residential place but also every area.
1
Warnings and Cautions ················································································· 21.Start ······································································································· 41.1. Parts Name ··························································································· 41.2. Screen Composition················································································· 51.3. Button at Buttom of Home screen ································································ 51.4. Home Screen Composition (Set Contol Area) ·····················································61.5. Home Screen Composition (Value of Information Area) ·········································71.6. Setting WIFI ······························································································91.7. Registration ···························································································· 101.8. How to use Smartphone ············································································· 112. Set control ································································································ 132.1. Adding another device ··············································································· 132.2. Moving device or deleting ··········································································· 132.3. Device setting and control ·········································································· 133. Calling ····································································································· 143.1. Screen Composition·················································································· 143.2. Front Door ····························································································· 163.3. Guard Station ·························································································· 173.4. Telephone records ··················································································· 183.5. Answering by Smart phone ········································································· 184. Security ··································································································· 194.1. Emergency ····························································································· 194.2. Away mode ···························································································· 204.3. Anti-Crime mode ····················································································· 224.4 CCTV ····································································································· 234.5. Emergency Record ··················································································· 244.6. Visitor ··································································································· 255. Home IoT ································································································· 275.1. Home IoT Log-in ····················································································· 275.2. Set up screen ························································································· 275.3. Wireless device register / delete ··································································· 275.4. Wireless device monitoring and control ·························································· 285.5 Mode set up and control(Mode) ···································································· 295.6. Reserved control set up (IF-RUN) ································································· 296. Convinient function ····················································································· 316.1. Calculator ······························································································ 316.2. Voice Recorder ························································································ 327. Setting ····································································································· 337.1. Setting ································································································· 337.2. P/W change ··························································································· 337.3. Other set up ··························································································· 347.4. Wi-fi connection ····················································································· 347.5. Setting the screen ···················································································· 357.6. Set language and key ················································································ 357.7. Setting the date and time ··········································································· 367.8. System Information ··················································································· 368. Register / Disable Wireless Device ·································································· 379. Installation ································································································ 4410. Wiring Diagram and components ··································································· 4511. Specification ···························································································· 46
fi
3
Cle
anin
g&
Use
Please don’t disassemble,repair or rebuild this productarbitrarily (please contact theservice center if a repair isneeded. ·It may cause an electric
shock or fire.
Please plug the power cablefirmly into the inner end ·It may cause a fire.
Please hold the plug tightlywhen unplugging the powercable (a part of the copperwire may be disconnected ifthe grabbing is only made onthe cord when pulling out thecable).·It may cause an electric
shock or fire
When connecting the powercables after cutting the cable,please install the product withpower off·It may cause an electric
shock or fire
When installing the product,please fix it firmly while usingthe wall-mounting unit andscrews.·It may cause an injury from
the falling object.
Please be careful when usingan AC circuit breaker sincethere is a possibility of anelectric shock.
When cleaning the product,please rub it with a soft anddry cloth after plugging outthe power cable. (Please don’tuse any chemical productssuch as wax, benzene, alcoholor cleanser.)
Please don’t drop the producton the ground and don’t applya shock . ·It may cause a failure.
Please use the designatedconnection cable within themaximum calling distancedesignated for the product·It may reduce the product
performance.
Please check the use voltageand current for the DC-onlyproducts and use theappropriate rectifier. ·It may cause a fire.
Please avoid direct rays of thesun or heating devices at atime of installation. ·It may cause a fire.
Please don’t install theproduct on an unstable placeor small support board. ·It may cause an injury if it
falls down while in use.
If an abnormal sound, burningsmell or smoke is coming outof the product, please plug outthe power cable and contact aservice center. ·It may cause an electric
shock or fire.
Please don’t insert anymetallic or burnable materialsinto the ventilation hole. ·It may cause an electric
shock or fire.
Please use only the designatedbatteries for the products ofusing DC power. ·It may cause an electric
shock or fire.
Cle
anin
g&
Use
Pow
er&
Inst
alla
tion
Warning
Caution
Warnings and cautionPlease follow the things described below in order to prevent anydanger or property damage.
Warning
Caution
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
It may cause a serious damage orinjury if violated.
It may cause a minor damage orinjury if violated.
Pow
er&
Inst
alla
tion
Warning
Please don’t use severalproducts at the same time onone power socket. ·It may cause a fire due to an
abnormal overheating.
Please don’t bend the powercable excessively or it maycause an electric shock.·fire when using a damaged
power cable.
Please don’t handle the powercable with a wet hand. ·It may cause an electric
shock.
Please plug out the powercable from the socket whennot using it for a long periodof time. ·It may shorten the product
lifespan or cause a fire.
Please don’t install theproduct in the place wherethere is much oil, smoke orhumidity.·It may cause an electric
shock or fire.
Please don’t install theproduct with the lighteningand thunder. ·It may cause an electric
shock or fire.
Please don’t use and connectthis product with otherproducts with different ratedvoltage ·It may cause a disorder or
fire.
When installing the productthat generates heat, pleaseinstall the product away fromthe wall (10cm) for theventilation. ·It may cause a fire due to
the increased internaltemperature.
2
Cle
anin
g&
Use
Please don’t disassemble,repair or rebuild this productarbitrarily (please contact theservice center if a repair isneeded. ·It may cause an electric
shock or fire.
Please plug the power cablefirmly into the inner end ·It may cause a fire.
Please hold the plug tightlywhen unplugging the powercable (a part of the copperwire may be disconnected ifthe grabbing is only made onthe cord when pulling out thecable).·It may cause an electric
shock or fire
When connecting the powercables after cutting the cable,please install the product withpower off·It may cause an electric
shock or fire
When installing the product,please fix it firmly while usingthe wall-mounting unit andscrews.·It may cause an injury from
the falling object.
Please be careful when usingan AC circuit breaker sincethere is a possibility of anelectric shock.
When cleaning the product,please rub it with a soft anddry cloth after plugging outthe power cable. (Please don’tuse any chemical productssuch as wax, benzene, alcoholor cleanser.)
Please don’t drop the producton the ground and don’t applya shock . ·It may cause a failure.
Please use the designatedconnection cable within themaximum calling distancedesignated for the product·It may reduce the product
performance.
Please check the use voltageand current for the DC-onlyproducts and use theappropriate rectifier. ·It may cause a fire.
Please avoid direct rays of thesun or heating devices at atime of installation. ·It may cause a fire.
Please don’t install theproduct on an unstable placeor small support board. ·It may cause an injury if it
falls down while in use.
If an abnormal sound, burningsmell or smoke is coming outof the product, please plug outthe power cable and contact aservice center. ·It may cause an electric
shock or fire.
Please don’t insert anymetallic or burnable materialsinto the ventilation hole. ·It may cause an electric
shock or fire.
Please use only the designatedbatteries for the products ofusing DC power. ·It may cause an electric
shock or fire.
Cle
anin
g&
Use
Pow
er&
Inst
alla
tion
Warning
Caution
2
2. Warnings and cautionPlease follow the things described below in order to prevent anydanger or property damage.
Warning
Caution
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
It may cause a serious damage orinjury if violated.
It may cause a minor damage orinjury if violated.
Pow
er&
Inst
alla
tion
Warning
Please don’t use severalproducts at the same time onone power socket. ·It may cause a fire due to an
abnormal overheating.
Please don’t bend the powercable excessively or it maycause an electric shock.·fire when using a damaged
power cable.
Please don’t handle the powercable with a wet hand. ·It may cause an electric
shock.
Please plug out the powercable from the socket whennot using it for a long periodof time. ·It may shorten the product
lifespan or cause a fire.
Please don’t install theproduct in the place wherethere is much oil, smoke orhumidity.·It may cause an electric
shock or fire.
Please don’t install theproduct with the lighteningand thunder. ·It may cause an electric
shock or fire.
Please don’t use and connectthis product with otherproducts with different ratedvoltage ·It may cause a disorder or
fire.
When installing the productthat generates heat, pleaseinstall the product away fromthe wall (10cm) for theventilation. ·It may cause a fire due to
the increased internaltemperature.
2 3
Where the MAINS plug or an appliance coupler is used asthe disconnect device, the disconnect device shall remain readily operable.
4
5
6
eather eather
7
Setting information
8
9
Sign up Duplication
Registration
10
HomeIot
11
12
another
device or deleting
13
14
15
16
Set up the front screen t
video control
17
18
19
Option
20
③ Start ④ Close
21
22
check
23
24
25
26
27
o
28
29
30
31
32
words
33
R ing tone
34
35
36
37
38
39
40
41
42
43
44
① Keep out of direct sunlight② Proper installation height is at 145~150Cm from the ground.③ When to install it, avoid the place where can be influenced by Magnetism Humidity,
Direct light and heater④ The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
45
46
Model
Spec. CMV-70MX
Wiring Camera-4wire(Polarity)2EA, Modum-4Wire(Polarity), Interphone-4wire(Polarity)
Power AC 100 ~ 240V , 50~60Hz
Current
Comsumtion standby :5W , Max :15W
Communication
Way HANDS FREE
Sound
- Individual entrance : Electronic Chime with 3 Tones(for 2 consecutive times)
- Lobby : Electronic Chime with 3 Tones(for 2 consecutive times) consecutive times.
- Guard : Melody Chime
- Interphone : Electronic bell
Distance
Individual camear
(Φ0.5) Lobby Guard (Φ0.5)
28m 300m 1km
Temp. 0 ~ +40℃ (32°F ~ 104°F)
size 181(W) X 245(H) X 32(D) mm
47
WI-FI spec.
Spec.
Receiver sensitivity -79dBm @802.11b 11Mbps
-67dBm @ 802.11g 54Mbps
IEEE802.11/b/g/n
Transmit power 17 dBm @1~11Mbps As specified in IEEE 802.11
Frequency bands 2412 MHz ~ 2484MHz
Supply voltage range 5V or 3V
ZigBee spec. (ZigBee only zigbee device.)
Spec
Receiver sensitivity -95 dBm @ 1% PER 802.15.4 Section
6.5.3.3
Transmit power +2.5 dBm
Z-Wave data rates 250kbps
Printed In Korea / 2016.07.104
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com PM5470MX0010