KEITH® WALKING FLOOR® systems are available in a wide range of profiles and thicknesses to address the vast number of

applications that are in use worldwide. A general description of uses, applications, and benefits to each system is below.

- 21 slat system

- Lighter weight

- Fast install

- Available in aluminium & UHMW

- Excellent cleanout

- Original WALKING FLOOR® slat profile

- Wide range of profile types

- Interchangeable slat designs

- Used for shredded paper, MSW,

recyclables, biofuels, light to moderate

C&D and wood forest products

- Available in thicknesses ranging

from 1/8” to 3/4” triple ridge

STANDARD ALUMINUMSTAINLESS STEEL

PRESSURE SEAL® LITE

- Heavy abrasion applications

(Steel Slat only)

- Full length bearing support

- Full length hold-down

- Leak resistant

- Aluminum V-9 Slat typically

used for MSW, recyclables, and

light C&D

- Steel V-9 Slat designed for use

in heavy C&D, scrap metal,

aggregate, and asphalt

V-9 SERIES

- Designed for high moisture loads

- Can hold 12” of standing water

- Front mount drive

- Full length bearing support

- Used for MSW, medical waste and silage

LEAKPROOF

ALUMINUMSTEEL

1/8”

1/2” IMPACT

1/2” CWSIMPACT

REVISED 3.6.18

1/8” 3/16” 7/32” 1/4” UHMW

• Ideal for abrasive loads

• Very high wear resistance

• Capable of moving pallets

• Long flooring life

CHOOSING THE RIGHT FLOOR®

3/4” CWSIMPACT

* Check with your trailer manufacturer or local dealer to make sure your trailer is compatible with forklift traffic.

3/16”HORIZONTALSEAL

- For MSW

- Leak resistant

- No floor seal

V-18 SERIES

1/2” DoubleRidge

1/2” TripleRidge

COMMON FLOORING AND COMPONENTS

STANDARD 3.5” SLATS

MOBILE APPLICATIONS

(1/8")

2185(3/16")

2188(7/32")

2190(3/8")

2199(1/2" IMPACT™)

2295

(1/2" CWS IMPACT™)

2299

(3/4" IMPACT™)

2297(3/4" CWS IMPACT™)

2301

BEARINGS

LEAK PROOF (15 SLAT)

SEAL SUBDECK

3003 BEARING

3003WEARPAD

42045SPLASH GUARD

HOLD-DOWN

2468

SPLASH GUARDHOLD-DOWN

2469

3" WIDE"T" BLOCK

47674

BENT "Y"

1212HORIZONTAL 1"x1"

STEEL

3002

1"x1"ALUMINUM

2281

HOLD-DOWN

3004

V-9 SERIES

(19/32")

2145LP BEARING

2146

2167

www.keithwalkingfloor.com©2018 KEITH Manufacturing Co. All Rights Reserved. KEITH, KEITH logo and WALKING FLOOR are registered trademarks of KEITH Manufacturing Co. Equipment manufactured by KEITH Manufacturing Co. is protected by numerous patents both domestic and foreign.

KEITH Manufacturing Co.WORLD HEADQUARTERS(800) 547-6161(541) 475-3802(541) 475-2169 faxsales@keithwalkingfloor.com

®

(STAINLESS STEEL SLAT)

2824

PRESSURE SEAL® LITE

STANDARD or HIGH TEMP.J - BEARING

2446

COMPONENTS NOT SHOWN TO SCALE

ALU

M T

RAIL

ER W

ALL

WELD DOWN

WELD DOWN WITH STEEL INSERT

3/8" FLAT TOP

ALUMINUM

5/32”1/8”

FLAT TOPSTEEL

STEE

L TR

AIL

ER W

ALL

BOLT DOWN

STEEL SIDE SEAL18

"ALUM SIDE SEAL1

4"

BOLT DOWN BOLT DOWN

2502

5/8" ALUMINUM

V-PAN (ST)STEEL INSERT

5/32”1/8"

STEEL

STANDARD J-BEARING

(3/8")

2754(7/32")

2293(3/16")

2271

HORIZONTAL SEAL

V-18 SERIESJ - BEARING

265214

" ALUM SIDE SEAL

ALU

M T

RAIL

ER W

ALL

STEE

L TR

AIL

ER W

ALL

WELD DOWN

2653

1/2" IMPACT™

2654/2675

1/2" CWS IMPACT™

2692/2693

1/2" CWS IMPACT™

2692/2693

BOLT DOWN

2669

SUB-DECK INSERT

2670

BOLT DOWN

2672

18

" ALUM or STEEL SIDE SEAL

WELD DOWN 2650