Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
EXPERTS IN FIELD CONTROLS©2012 Sontay Limited. All rights reserved. E & OEInformation is subject to change without notice.
Chilled Beams
Advantages of Chilled Beams
During the last decade, the technology for chilled beams has been refined and improved and has been more widely applied.
As well as reducing energy consumption, chilled beams improve comfort
levels by lowering the potential for draughts and cutting out the intrusive
noise and aesthetic problems associated with more conventional solutions,
such as mechanical ventilation and air conditioning. The fact that chilled
beams are water-based systems makes them environmentally attractive, and
because they are unobtrusive installations, they free up more valuable office
space for occupation and use.
Chilled beams and chilled ceilings are
not appropriate for every building
project, but there are a number of
applications where they are ideal
• Commercial office developments
• Hotels
• Hospitals
85%
R
HC
hille
d Beams & Chilled Ceili
ng Sys
tem
s
Water
Dew Point
of C
ondensation Detection &
P
reve
nti
on
NEWENHANCED
RANGE
. . . experts in f ield controls
During the last decade, the technology for chilled beams has been refined and improved and has been more widely applied.
GS-CO2
CO² Sensors
RH
RH Sensors (with optional dew point output)
WD-CPS
WD-CPS Condensation Detection and Prevention Range
AV
AV Air Velocity Sensor
TT-359
Direct Clamp-on Temperature Sensor
. . . experts in f ield controls
Chilled Beams
During the last decade, the technology for chilled beams has been refined and improved and has been more widely applied.
Ref. Sontay Applications
A AV Air Velocity Sensor
B GS-CO2 CO² Sensors
C RH RH Sensors (optional dew point output)
D TT-359 Direct Clamp-on Temperature Sensor
E WD-CPS-x Condensation Prevention Sensor / Switch & Detection Plate
DETECTION - COMMUNICATION- CONTROL
CO2CO2CO22
Controlling Chilled Beams
Sontay is a market leading manufacturer and distributor of building measurement and control peripherals. The company provides a fast, professional and personal service, supporting businesses with reliable, durable and innovative products. This is backed
by a dedicated Customer Services Team to assist with product advice and technical support. Please visit www.sontay.com
Altering the rate at which air is supplied via an
active chilled beam is one method of controlling the
output, reducing potential over cooling and meeting
CO2 requirements in spaces. Another is to vary
the temperature of the air supplied. Condensation
detectors should be considered to ensure that
condensation does not occur. Also that the total air
supply to the space can deal with the design range
of floor occupation density within the comfort
criteria specified.
Chilled beam and chilled ceiling systems are
typically designed to use the dry cooling principle by
selecting the ventilation rate, supply air conditions
and chilled water flow temperature so that no risk
of condensation exists. The space air dew point
temperature should be around 2°C lower than the
flow temperature of chilled water in the ceiling or
beam system.
The following precautionary control measures can be implemented in the BMS to avoid condensation:
• Space RH is monitored to ensure the chilled
water flow temperature is controlled above
the calculated dew point.
• Condensation sensors can be utilized to shut
off the chilled water supply when condensation
is detected, this is recommended, especially
when windows are openable to external air.
• In the absence of condensation sensors, open-able
windows should be equipped with window switches
that trigger chilled water control valves to shut-off.
Sontay products suitable for use with chilled beams
Sontay Limited · Four Elms Road · Edenbridge · Kent · TN8 6AB
UK Rate +44 (0) 1732 861200 · International +44 (0) 1732 861225
AV Air Velocity Sensors
GS-CO2 CO2 Sensors
TT-359 Direct Clamp-on Temperature Sensor
RH Sensor (optional dew point output)
CHILLED BEAM APPLICATION (WD-cps)
Chilled beam systems can cause indoor rain.
EXPERTS IN FIELD CONTROLS©2012 Sontay Limited. All rights reserved. E & OEInformation is subject to change without notice.
of C
on
densation Detection & P
reve
nti
on
85%
R
H
Dew Point
Water
Ch
illed
Beams & Chilled Ceiling S
yste
ms
NEW WD-CPS
R A N G E