CHEVROLET Aveo 2004-2006 Aveo Hatchback-2007 SUZUKI ... CHEVROLET AVEO HATCHBACK - 2007 PONTIAC G3 HATCHBACK

  • View
    25

  • Download
    1

Embed Size (px)

Text of CHEVROLET Aveo 2004-2006 Aveo Hatchback-2007 SUZUKI ... CHEVROLET AVEO HATCHBACK - 2007 PONTIAC G3...

  • INSTALLATION INSTRUCTIONS FOR PART 99-7951

    Phillips Screwdriver • Flat Blade Screwdriver Or Panel Removal Tool

    1-800-221-0932 www.metraonline.com

    KIT FEATURES

    © COPYRIGHT 2004-07 METRA ELECTRONICS CORPORATION

    APPLICATIONS

    • DIN Head Unit Provision with pocket • ISO DIN Head Unit Provision with pocket

    A) Radio Housing • B) ISO Brackets • C) Trim Plate

    KIT COMPONENTS

    TOOLS REQUIRED:

    99-7951

    A B C

    CHEVROLET Aveo 2004-2006

    Aveo Hatchback-2007 SUZUKI

    Forenza 2004-2007 Reno 2005-2007

    Verona 2004-2007 PONTIAC

    G3 Hatchback-2007

  • TABLE OF CONTENTS

    99-7951

    • Dash Disassembly - Suzuki Verona 2004 - 2007 ---------------------------------------- 1 - Chevrolet Aveo 2004 - 2006 --------------------------------------- 2 - Chevrolet Aveo Hatchback - 2007 --------------------------------- 2

    - Pontiac G3 Hatchback - 2007 -------------------------------------- 2

    - Suzuki Forenza 2004 - 2007 -------------------------------------- 3 - Suzuki Reno 2005 - 2007 -------------------------------------------3

    •Kit Assembly Chevrolet Aveo/Aveo Hatchback/Pontiac Hatchback/Suzuki Verona : - DIN Head Unit Provision with Pocket ------------------------------ 4 - ISO Head Unit Provision with Pocket ------------------------------ 5

    Suzuki Forenza /Suzuki Reno : - DIN Head Unit Provision with Pocket ------------------------------ 6 - ISO Head Unit Provision with Pocket ------------------------------ 7

    •Final Assembly ------------------------------------------------------ 8

  • 1

    99-7951

    1

    2

    Remove (4) Phillips screws holding radio to remove. (Figure B)

    Unclip and remove the trim plate panel surrounding the radio. (Figure A)

    Disconnect the negative battery termi- nal to prevent an accidental short cir- cuit.

    3

    DASH DISASSEMBLY

    SUZUKI VERONA 2004 - 2007

    A

    B

  • 2

    99-7951 DASH DISASSEMBLY

    Remove (4) Phillips screws from radio to remove. (Figure B)

    3

    Disconnect the negative battery terminal to prevent an accidental short circuit.

    1

    Unclip and remove the trim panels from both sides of radio/climate con- trols. (Figure A)

    2

    A

    B

    CHEVROLET AVEO 2004 - 2006 CHEVROLET AVEO HATCHBACK - 2007

    PONTIAC G3 HATCHBACK - 2007

  • 3

    99-7951 DASH DISASSEMBLY

    Disconnect temperature selector cable on passenger side of center console behind glove box. (Figure C)

    3

    Unsnap and remove entire panel sur- rounding radio. Note: The clips hold- ing radio panel to dash are very strong. (Figure D)

    4

    Remove (4) 10 MM bolts securing radio to remove. (Figure E)

    5

    Disconnect air selector cable on drivers side of center console behind dash above accelerator pedal. (Figure A & B)

    1

    Open glove box and remove (5) Phillips screws ((3) on top and (2) on bottom) then remove entire glove.

    2

    A

    B

    Inside of Glove Box

    C

    E

    AM/FM

    TAPE

    CD TUNE

    1 2 3

    4 5 6

    BASS

    MUTE

    EQ

    AST

    SCAN

    D

    SUZUKI FORENZA 2004-07 SUZUKI RENO 2005-07

  • 4

    99-7951 KIT ASSEMBLY

    Slide the aftermarket head unit into the cage and secure. (Figure C)

    3

    Cut and remove front lower mounting tabs from radio housing. (Figure A)

    1

    Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure B)

    2

    DIN HEAD UNIT PROVISION

    A

    B

    C

    CHEVROLET AVEO 2004 - 2006 CHEVROLET AVEO HATCHBACK - 2007

    PONTIAC G3 HATCHBACK - 2007

    SUZUKI VERONA 2004-2007

  • 5

    99-7951 KIT ASSEMBLY

    Snap the Trim plate into the Radio Housing. (Figure C)

    4

    Mount the ISO Brackets to the head unit with the screws sup- plied with the unit. (Figure B)

    2

    Slide the head unit into the radio opening until the side clips engage. (Figure C)

    3

    ISO DIN HEAD UNIT PROVISION

    A

    B

    C

    Cut and remove front lower mounting tabs from radio housing. (Figure A)

    1

    CHEVROLET AVEO 2004 - 2006 CHEVROLET AVEO HATCHBACK - 2007

    PONTIAC G3 HATCHBACK - 2007 SUZUKI VERONA 2004-2007

  • 6

    99-7951 KIT ASSEMBLY

    Slide the aftermarket head unit into the cage and secure. (Figure C)

    3

    Cut and remove rear lower mount- ing tabs from radio housing. (Figure A)

    1

    Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure B)

    2

    DIN HEAD UNIT PROVISION WITH POCKET

    SUZUKI FORENZA 2004-2007 SUZUKI RENO 2005-2007

    A

    B

    C

  • 7

    99-7951 KIT ASSEMBLY

    Snap the Trim plate into the Radio Housing. (Figure C)

    4

    Mount the ISO Brackets to the head unit with the screws sup- plied with the unit. (Figure B)

    2

    Slide the head unit into the radio opening until the side clips engage. (Figure C)

    3

    ISO DIN HEAD UNIT PROVISION

    A

    C

    B

    SUZUKI FORENZA 2004-2007 SUZUKI RENO 2005-2007

    Cut and remove rear lower mount- ing tabs from radio housing. (Figure A)

    1

  • 8

    FINAL ASSEMBLY

    Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit.

    FINAL WIRING CONNECTIONS

    99-7951 FINAL ASSEMBLY

    12V Ignition / Acc . . . Red

    12V Batt / Memory . . Yellow

    Ground . . . . . . . . . . . Black*

    Power Antenna . . . . . Blue

    Amp Turn-On . . . . . . Blue / White

    Amp Ground . . . . . . . Black / White

    Illumination. . . . . . . . Orange

    Dimmer . . . . . . . . . . Orange / White

    Right Front (+) . . . . . Gray

    Right Front (-) . . . . . . Gray/ Black

    Left Front (+) . . . . . . White

    Left Front (-) . . . . . . . White / Black

    Right Rear (+). . . . . . Violet

    Right Rear (-) . . . . . . Violet / Black

    Left Rear (+). . . . . . . Green

    Left Rear (-) . . . . . . . Green / Black

    METRA / EIA WIRING CODE

    *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications.

    1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)

    2 Re-connect the negative battery terminal and test the unit for proper operation.

    3 Snap radio housing assembly into factory radio opening.

    A

    A) Strip wire ends back 1/2"

    B) Twist ends together

    C) Solder

    D) Tape

    B

    C

    D

  • 9

    NOTES

    99-7951

  • 99-7951 INSTRUCTIONS

    1-800-221-0932 www.metraonline.com

    REV. 06/20/07 © COPYRIGHT 2004-07 METRA ELECTRONICS CORPORATION INST99-7951